Search vulnerabilities

Results 329

Export CSV
CVE-2026-82948

RF Replay of control commands

The Guardian 2 alarm unit lacks a mechanism to authenticate control commands sent over 433.92 MHz, which allows an attacker to replay the static commands to impersonate activity.  The attacker can also disarm or arm the system at will if a Nexsmart keypad (product link) is in use, thus compromising the functionality of the alarm system completely.

CVSS 4.0 · 7.1 High EPSS n/a KEV · Not listed
Vendors
—
Products
—
CVE-2026-73136

Static memo configuration in mpp Tempo disables per-challenge attribution binding, enabling third-party replay

Authentication Bypass by Capture-replay in ZenHive mpp allows an unauthenticated third party to obtain paid resources by replaying a transfer settled by an unrelated payer. MPP.Methods.Tempo normally binds a settled TIP-20 TransferWithMemo to the specific challenge under verification through an attribution nonce carried in the memo. When a static "memo" is configured in method_config, check_matched_memo_binding/3 returns the match unconditionally and that binding is skipped, leaving only token, recipient, amount and the static memo value to match on. The static memo is echoed in every unauthenticated 402 response and Tempo transfers are public, so an attacker can take any matching transfer paid by a legitimate customer, request a fresh challenge for the same route, and present that transaction hash as a type="hash" credential. The hash path performs no sender or signature check tying the presenter to the wallet that broadcast the transfer. This issue affects mpp: from 0.6.1 before 0.6.4.

CVSS 4.0 · 8.2 High EPSS < 1% KEV · Not listed
Vendors
CVE-2026-67581

On-chain transfer proof is not single-use in mpp EVM payment method, enabling cross-challenge replay

Authentication Bypass by Capture-replay in ZenHive mpp allows an unauthenticated remote client to obtain paid resources by resubmitting one settled on-chain transfer. MPP.Methods.EVM.verify/2 accepts a transaction-hash credential and matches a transfer purely on token, to and amount (ERC-20) or to and value (native). It binds the proof neither to the challenge being verified nor to any record of prior use, and the generic MPP.Plug dedup store keys on challenge.id, which is regenerated for every 402 response. On a static-price route, a single historical transfer matching the charge therefore satisfies an unbounded number of later charges, including transfers an attacker can read off a public block explorer. This issue affects mpp: from 0.3.0 before 0.6.3.

CVSS 4.0 · 8.7 High EPSS < 1% KEV · Not listed
Vendors
CVE-2026-53424

Missing one-time-use enforcement in Samly allows replay of SAML bearer assertions

Authentication Bypass by Capture-replay vulnerability in dropbox samly allows an attacker to authenticate as the subject of a captured SAML assertion by resubmitting it. Samly.Helper.decode_idp_auth_resp/3 in lib/samly/helper.ex calls esaml_sp:validate_assertion/2, whose default duplicate detector is a no-op. The /3 arity accepting a DuplicateFun exists in esaml and implements the check, but Samly never calls it and offers no configuration to supply one, so the SAML 2.0 Web Browser SSO Profile requirement that a bearer assertion be used once is unenforced. An attacker holding a valid SAMLResponse obtained from the network, from browser history, or from logs can submit the identical bytes repeatedly until the assertion's NotOnOrAfter passes, each time establishing a session as the assertion's subject. This issue affects samly: from 0.3.0 onward.

CVSS 4.0 · 9.1 Critical EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-131697

Tanium addressed an improper access controls vulnerability in Tanium Server.

Tanium addressed an improper access controls vulnerability.

CVSS 3.1 · 6.4 Medium EPSS n/a KEV · Not listed
Vendors
Products
CVE-2026-130802

CVE-2026-130802

The NFC authentication handshake relies on a fixed, static challenge instead of a unique, random value for every session. This allows an attacker to perform a "replay attack," successfully authenticating by simply sending the same pre-recorded response.

CVSS 3.1 · 9.1 Critical EPSS < 1% KEV · Not listed
CVE-2026-71861

Chainguard SDK: AWS SigV4 token replay in auth/aws.VerifyToken — Chainguard-Audience/Chainguard-Identity binding headers not required in SignedHeaders

The Chainguard SDK is a public Go SDK for integrating with the Chainguard platform. Prior to 0.1.107, auth/aws.VerifyToken trusts the Chainguard-Audience and Chainguard-Identity headers without requiring those headers to be covered by AWS SigV4 SignedHeaders. An attacker with a fresh STS GetCallerIdentity request signed by a victim can rewrite the unsigned binding headers and replay the proof to another relying party, causing the relying party to authenticate the victim’s AWS identity for an attacker-chosen audience and identity. Code that only uses auth/aws.GenerateToken is unaffected because the generator signs the binding headers, and exploitation requires a signed request within its validity window. This issue is fixed in version 0.1.107.

CVSS 3.1 · 7.4 High EPSS n/a KEV · Not listed
Vendors
Products
Sdk
CVE-2026-120974

Security Advisory 0219

On affected platforms running Arista EOS with IPsec AutoVPN Feature configured with dynamic paths, the configured IPsec replay window may not be applied as expected. As a result, IPsec anti-replay protection may be silently inactive even when it has been configured via an SA policy, contrary to the operator's expectation. This issue does not allow decryption of the affected IPsec traffic, but it may allow replay of previously valid protected traffic.

CVSS 4.0 · 6.9 Medium EPSS < 1% KEV · Not listed
Vendors
Products
Eos
CVE-2026-110278

IBM ContextForge MCP Gateway is affected by an information exposure vulnerability

IBM ContextForge MCP Gateway 1.0.0 through 1.1.0 could allow an attacker to replay identity propagation claims signatures or expose sensitive user identity information to third-party MCP servers due to static signature payloads and missing per-gateway configuration checks during tool invocation.

CVSS 3.1 · 7.4 High EPSS < 1% KEV · Not listed
Vendors
Ibm
CVE-2026-11749

Replay of Bearer Assertions in Armeria‑SAML Module

A vulnerability has been identified in armeria-saml prior to 1.41.1, where bearer assertions are not enforced for one-time use, allowing replay of previously consumed assertion IDs within their validity period.

CVSS 4.0 · 7.6 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-61473

Privilege Escalation in Intel TDX Migration Trust Domain through Authentication Bypass

Authentication bypass by capture-replay in the MigTD for the Intel(R) TDX Migration Trust Domain (MigTD) within Ring 0: Hypervisor may allow an escalation of privilege. System software adversary with a privileged user combined with a low complexity attack may enable escalation of privilege. This result may potentially occur via local access when attack requirements are not present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (high), integrity (high) and availability (none) of the vulnerable system, resulting in subsequent system confidentiality (high), integrity (high) and availability (none) impacts.

CVSS 4.0 · 9.2 Critical EPSS < 1% KEV · Not listed
Vendors
—
Products
—
CVE-2026-126068

Action Mailbox: Possible signature replay in Action Mailbox Mailgun ingress

Action Mailbox routes incoming emails to controller-like mailboxes for processing in Rails. Prior to 8.1.4.1 and 8.0.5.2, the Action Mailbox Mailgun ingress authenticates a request with an HMAC of the timestamp and token parameters concatenated without a separator, and ActionMailbox::Ingresses::Mailgun::InboundEmailsController::Authenticator#recent? rejects only timestamps more than 2 minutes in the past. Because the signature does not fix the boundary between the two values, a captured signed request can be presented with a timestamp far in the future, which the ingress then accepts indefinitely. An attacker who obtains one signed Mailgun webhook request, but not the signing key, could submit arbitrary inbound email that Action Mailbox processes as genuine, possibly leading to forged messages attributed to the sender of the attacker's choosing. Applications that receive inbound email through the Action Mailbox Mailgun ingress are affected. This issue is fixed in versions 8.1.4.1 and 8.0.5.2.

CVSS 3.1 · 3.7 Low EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-123801

SuperTokens Core: SAML callback accepts a replayed RelayState + SAMLResponse, minting a fresh authorization code on each replay

SuperTokens Core is an open source authentication server. From 11.3.0 until 11.3.8, 11.4.8, 12.0.11, 12.1.2, 12.2.1, and 12.3.1, SAML.handleCallback does not consume RelayState, record assertion identifiers, or enforce Response.InResponseTo. In the SP-initiated flow, an attacker who obtains a legitimately issued, still-valid SAML response and its matching RelayState can resubmit the pair to /recipe/saml/callback before the assertion's NotOnOrAfter time; in the IdP-initiated flow, the assertion can be replayed without RelayState. The missing Response.InResponseTo check also permits an in-progress login to be completed with an assertion for a different identity and fails to enforce allowIDPInitiatedLogin=false. The callback does not validate Destination or SubjectConfirmationData Recipient and NotOnOrAfter, and each accepted callback mints a fresh, independently redeemable authorization code carrying the captured user's identity. This issue is fixed in versions 11.3.8, 11.4.8, 12.0.11, 12.1.2, 12.2.1, and 12.3.1.

CVSS 3.1 · 7.4 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-76966

Multiple vulnerabilities in Application Server ABAP of SAP NetWeaver and ABAP Platform

Due to improper RFC protocol validation in the SAP Kernel used by the Application Server ABAP of SAP NetWeaver and ABAP Platform, an unauthenticated attacker can send a crafted RFC request that exploits logical errors in memory management, leading to memory corruption. This could lead to a high impact on confidentiality and integrity with low impact on availability of the application.

CVSS 3.1 · 8.9 High EPSS < 1% KEV · Not listed
Vendors
CVE-2026-82907

Apache OFBiz: externalLoginKey honoured pre-auth, reusable and unbound

Authentication Bypass by Capture-replay in ExternalLoginKeysManager in Apache OFBiz 24.09 before 24.09.08 on all platforms allows a remote unauthenticated attacker who captures a live externalLoginKey value to obtain a complete, cookie-free, reusable session as the user who issued it, in every webapp that user can reach, because checkExternalLoginKey runs as a global preprocessor ahead of both the CSRF and authentication checks and accepts the key as a bearer credential that is never bound to a client, never expires, and is not invalidated after use, while the framework itself both appends live keys to every cross-webapp link it renders and, via WidgetWorker's unvalidated inter-app link target, lets an authenticated user's key be attached to an attacker-chosen absolute URL and delivered directly to the attacker's own server. Users are recommended to upgrade to version 24.09.08, which fixes this issue.

CVSS 3.1 · 9.8 Critical EPSS < 1% KEV · Not listed
Products
CVE-2026-102894

GPUStack: SAML callback trusts an unverified SAMLResponse, allowing authentication bypass and account takeover

GPUStack is an open-source GPU cluster manager for AI model serving and GPU instance provisioning. From 0.7.1 until 2.2.2, the /auth/saml/callback endpoint decoded SAML XML, used its NameID and attributes to resolve or provision a user, and minted a gpustack_session JWT without calling OneLogin_Saml2_Auth.process_response to verify the signature, issuer, audience, destination, or time conditions. Any network client could submit an identity for an existing user, including an administrator, or provision a new non-administrator account, even when SAML was not configured. Response and Assertion identifiers were not consumed, so captured signed responses could also be replayed. This issue is fixed in version 2.2.2.

CVSS 3.1 · 9.1 Critical EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-122220

WPO365 LOGIN before 45.2 SAML Replay Protection Bypass

WPO365 | LOGIN (wpo365-login) plugin before version 45.2 contains an authentication bypass by capture-replay vulnerability caused by a non-functional anti-replay check in Saml2_Service::check_message_id(), which never persists processed SAML message IDs to the wpo365_saml_message_ids transient due to a logic error that returns before saving. Attackers who capture a validly-signed SAMLResponse can replay it to the ACS endpoint repeatedly within its assertion validity window to log in as the victim, including administrators, without detection since the duplicate message ID check never triggers.

CVSS 4.0 · 9.1 Critical EPSS < 1% KEV · Not listed
Vendors
—
Products
—
CVE-2026-41020

Replay Attack via Static Nonce in Eaton easyE4 Authentication

Eaton easyE4 uses a static nonce during authentication, which could allow an unauthenticated attacker with access to captured authentication traffic to replay a valid authentication exchange and gain unauthorized access to the device.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-104381

Fireware OS Missing Authentication in FireCluster State Sync Allows BOVPN Tunnel Denial of Service

A missing authentication vulnerability in Fireware OS's FireCluster state synchronization feature allows an unauthenticated attacker positioned on the cluster synchronization network segment to force premature VPN tunnel termination by sending crafted cluster synchronization traffic.

CVSS 4.0 · 6 Medium EPSS < 1% KEV · Not listed
Vendors
Products