Export limit exceeded: 12265 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.

Search vulnerabilities

Results 12,265

Export CSV
CVE-2026-99295

smb: client: stop processing a read response after a receive error

In the Linux kernel, the following vulnerability has been resolved: smb: client: stop processing a read response after a receive error cifs_read_iter_from_socket() may call cifs_reconnect() before returning an error. The reconnect path aborts pending mids and invokes their callbacks. The callback can then release the cifs_io_subrequest containing rdata. cifs_readv_receive() nevertheless continues after a negative return and may dereference rdata in cifs_readv_discard(). KASAN reports the resulting UAF: BUG: KASAN: slab-use-after-free in cifs_readv_receive Read of size 4 by task cifsd cifs_readv_receive (fs/smb/client/transport.c:1284) cifs_demultiplex_thread (fs/smb/client/connect.c:1355) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) Freed by task 148: netfs_put_subrequest (fs/netfs/objects.c:267) netfs_read_collection (fs/netfs/read_collect.c:460) netfs_wait_for_in_progress (fs/netfs/misc.c:462) Return the socket error immediately, as this path did before the iterator conversion. This also avoids adding a negative length to total_read.

CVSS 3.1 · 6.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99305

fbdev: udlfb: don't rebuild the mode list while the framebuffer is in use

In the Linux kernel, the following vulnerability has been resolved: fbdev: udlfb: don't rebuild the mode list while the framebuffer is in use dlfb_setup_modes() frees info->modelist with fb_destroy_modelist() and rebuilds it, but fbcon holds raw pointers into that list in fb_display[i].mode and nothing un-publishes them the way do_unregister_framebuffer() and store_modes() do with fbcon_delete_modelist(). The function does refuse to install a new mode while the framebuffer has users (dlfb->fb_count != 0), but only after the list is already destroyed. Reached from the 0666 "edid" sysfs attribute, an unprivileged write to /sys/class/graphics/fb0/edid therefore fails with -EINVAL and still leaves every fb_display[i].mode dangling; the next console switch reads the freed fb_videomode in fb_videomode_to_var(). Test fb_count before touching the list. fbcon takes a reference through fbcon_open(), so that condition covers exactly the states in which fb_display[] points into the list, and the errno returned to userspace is unchanged. BUG: KASAN: slab-use-after-free in fb_videomode_to_var (drivers/video/fbdev/core/modedb.c:905) Read of size 4 at addr ffff8880107b449c by task kworker/1:1/47 Workqueue: events console_callback Call Trace: fb_videomode_to_var (drivers/video/fbdev/core/modedb.c:905) display_to_var (drivers/video/fbdev/core/fbcon.c:998) fbcon_switch (drivers/video/fbdev/core/fbcon.c:2182) redraw_screen (drivers/tty/vt/vt.c:994) complete_change_console (drivers/tty/vt/vt_ioctl.c:1141) console_callback (drivers/tty/vt/vt.c:3358) process_one_work (kernel/workqueue.c:3396) worker_thread (kernel/workqueue.c:3479 kernel/workqueue.c:3560) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) ... The buggy address is located 28 bytes inside of freed 96-byte region [ffff8880107b4480, ffff8880107b44e0)

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99297

media: em28xx: fix double free in em28xx_alloc_urbs

In the Linux kernel, the following vulnerability has been resolved: media: em28xx: fix double free in em28xx_alloc_urbs When allocation of usb_bufs->buf[i] fails, em28xx_alloc_urbs() explicitly frees all items within usb_bufs->buf before calling em28xx_uninit_usb_xfer(), which also frees these items, causing them to be freed twice. BUG: KASAN: double-free in usb_free_urb.part.0 (drivers/usb/core/urb.c:25 ./include/linux/kref.h:65 drivers/usb/core/urb.c:96) Free of addr ffff88802fd37c00 by task kworker/1:2/1182 Workqueue: events request_module_async Call Trace: kasan_report_invalid_free (mm/kasan/report.c:557) check_slab_allocation (mm/kasan/common.c:235) kfree (./include/linux/kasan.h:199 (discriminator 1) mm/slub.c:2693 (discriminator 1) mm/slub.c:6508 (discriminator 1) mm/slub.c:6801 (discriminator 1)) usb_free_urb.part.0 (drivers/usb/core/urb.c:25 ./include/linux/kref.h:65 drivers/usb/core/urb.c:96) usb_free_urb (drivers/usb/core/urb.c:95) em28xx_uninit_usb_xfer (drivers/media/usb/em28xx/em28xx-core.c:964) em28xx_alloc_urbs (drivers/media/usb/em28xx/em28xx-core.c:1076) em28xx_dvb_init (drivers/media/usb/em28xx/em28xx-dvb.c:1734 drivers/media/usb/em28xx/em28xx-dvb.c:1698) em28xx_init_extension (drivers/media/usb/em28xx/em28xx-core.c:1248) request_module_async (drivers/media/usb/em28xx/em28xx-cards.c:3685) process_one_work (kernel/workqueue.c:3396) worker_thread (kernel/workqueue.c:3479 kernel/workqueue.c:3560) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) Allocated by task 1182: kasan_save_stack (mm/kasan/common.c:57) kasan_save_track (mm/kasan/common.c:78) __kasan_kmalloc (mm/kasan/common.c:398 mm/kasan/common.c:415) __kmalloc_noprof (./include/linux/kasan.h:263 mm/slub.c:5414 mm/slub.c:5439) em28xx_alloc_urbs (./include/linux/slab.h:995 ./include/linux/slab.h:1312 drivers/media/usb/em28xx/em28xx-core.c:1081) em28xx_dvb_init (drivers/media/usb/em28xx/em28xx-dvb.c:1734 drivers/media/usb/em28xx/em28xx-dvb.c:1698) em28xx_init_extension (drivers/media/usb/em28xx/em28xx-core.c:1248) request_module_async (drivers/media/usb/em28xx/em28xx-cards.c:3685) process_one_work (kernel/workqueue.c:3396) worker_thread (kernel/workqueue.c:3479 kernel/workqueue.c:3560) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) Freed by task 1182: kasan_save_stack (mm/kasan/common.c:57) kasan_save_track (mm/kasan/common.c:78) kasan_save_free_info (mm/kasan/generic.c:584) __kasan_slab_free (mm/kasan/common.c:253 mm/kasan/common.c:285) kfree (./include/linux/kasan.h:235 mm/slub.c:2748 mm/slub.c:6508 mm/slub.c:6801) em28xx_alloc_urbs (drivers/media/usb/em28xx/em28xx-core.c:1084) em28xx_dvb_init (drivers/media/usb/em28xx/em28xx-dvb.c:1734 drivers/media/usb/em28xx/em28xx-dvb.c:1698) em28xx_init_extension (drivers/media/usb/em28xx/em28xx-core.c:1248) request_module_async (drivers/media/usb/em28xx/em28xx-cards.c:3685) process_one_work (kernel/workqueue.c:3396) worker_thread (kernel/workqueue.c:3479 kernel/workqueue.c:3560) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) Remove the explicit cleanup loop and let em28xx_uninit_usb_xfer() handle the cleanup.

CVSS 3.1 · 4.2 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99290

ksmbd: fix use-after-free after a failed durable reconnect

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free after a failed durable reconnect ksmbd_reopen_durable_fd() republishes a detached durable handle in the reconnecting session's file table and takes no reference for that entry. If smb2_open() then fails, cleanup relies on the final ksmbd_fd_put() to remove the volatile id. Two reconnects of the same handle can both take a lookup reference before either attaches it. If the one that reopens first then fails and drops its references first, the other request makes the final put through ksmbd_put_durable_fd(). That frees the handle without removing the first session's table entry, so tearing that session down writes to freed memory. BUG: KASAN: slab-use-after-free in __close_file_table_ids+0x14d/0x740 [ksmbd] Call Trace: __close_file_table_ids+0x14d/0x740 [ksmbd] ksmbd_destroy_file_table+0x76/0x100 [ksmbd] ksmbd_session_destroy+0xf8/0x480 [ksmbd] ksmbd_dispose_sessions+0x13e/0x200 [ksmbd] ksmbd_conn_sessions_cleanup+0x4c3/0x6d0 [ksmbd] Freed by task 1030: __ksmbd_close_fd+0x97d/0x1000 [ksmbd] smb2_open+0x14eb/0xd9f0 [ksmbd] Commit 3515503322f4 ("ksmbd: fix durable reconnect error path file lifetime") handles a final put made by the reconnecting request, but not one made by another holder. Remove the volatile id under the file-table lock on this error path, before the references are dropped, as ksmbd_close_fd() does on the request_open path just above. Removal then no longer depends on which holder makes the final put. The stale comment in the reconnect cleanup is updated to match. A successful reconnect is unchanged.

CVSS 3.1 · 6.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99301

virtio_net: atomically disable rx mode work

In the Linux kernel, the following vulnerability has been resolved: virtio_net: atomically disable rx mode work virtio-net uses a boolean to gate rx_mode_work during device teardown. The flag is changed under RTNL, but ndo_set_rx_mode checks it under the address-list lock. A callback can therefore pass the check and enqueue work after teardown has flushed it. The work is also enabled before late probe operations that can fail, allowing probe unwind to free the netdev with work still queued. KASAN reports the worker using a virtqueue that probe unwind already freed: BUG: KASAN: slab-use-after-free in virtqueue_add_split Workqueue: events virtnet_rx_mode_work Call Trace: virtqueue_add_split (drivers/virtio/virtio_ring.c:706) virtqueue_add_sgs (drivers/virtio/virtio_ring.c:2839) virtnet_send_command_reply (drivers/net/virtio_net.c:3565) virtnet_rx_mode_work (drivers/net/virtio_net.c:3833) process_one_work (kernel/workqueue.c:3322) worker_thread (kernel/workqueue.c:3405) Freed by task 119: kfree (mm/slub.c:6625) vp_del_vq.isra.0 (drivers/virtio/virtio_pci_common.c:259) vp_del_vqs (drivers/virtio/virtio_pci_common.c:285) virtnet_probe (drivers/net/virtio_net.c:7129) Use the workqueue disable mechanism to atomically reject new queue attempts and drain running work. Keep work disabled until probe succeeds or restore has reattached the netdev, then enable it and replay receive-mode state for a running interface. Disable it before resource teardown in freeze and remove.

CVSS n/a EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99310

nfsd: hold cl_lock in client_has_openowners()

In the Linux kernel, the following vulnerability has been resolved: nfsd: hold cl_lock in client_has_openowners() client_has_openowners() walks clp->cl_openowners and reads so_stateids without clp->cl_lock. nfs4_put_stateowner() unhashes that openowner under cl_lock and then frees it, so a concurrent EXCHANGE_ID with mismatched creds can use-after-free the nfs4_openowner. BUG: KASAN: slab-use-after-free in client_has_state+0x10a/0x140 fs/nfsd/nfs4state.c:3718 client_has_openowners() nfsd4_exchange_id nfsd4_proc_compound nfsd_dispatch svc_process Take clp->cl_lock while client_has_openowners() walks the openowner list.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99289

ksmbd: fix app-instance non-durable supersede session UAF

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix app-instance non-durable supersede session UAF ksmbd_close_fd_app_instance_id() supersedes a prior open that has the same AppInstanceId. It reaches that open's session through opinfo->sess. This pointer is not refcounted. Session teardown detaches durable handles before it frees the session. It does not detach a non-durable open. That open still points at the session through opinfo->sess after the session is freed. Another session can supersede the open at the same time. The supersede then takes a write lock through the stale pointer, in the freed session's file table. BUG: KASAN: slab-use-after-free in _raw_write_lock+0x71/0xd0 Call Trace: _raw_write_lock+0x71/0xd0 ksmbd_close_fd_app_instance_id+0xd9/0x670 [ksmbd] smb2_open+0x3e10/0xd910 [ksmbd] Freed by task 212: ksmbd_session_destroy+0x38d/0x480 [ksmbd] Fix this by looking the session up by opinfo->session_id. The lookup returns a reference, as smb2_break_collect_channels() does. Recheck that opinfo->sess still points at it before using it. Do the lookup without m_lock held. destroy_previous_session() takes m_lock under the session table lock, and taking them in the other order here would deadlock.

CVSS 3.1 · 6.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-126049

Gwenhywfar 5.14.2 Use-After-Free via GWEN_TLV_Buffer_To_DB() Nested BER-TLV Parsing

Gwenhywfar 5.14.2 contains a heap use-after-free vulnerability in GWEN_TLV_Buffer_To_DB() in src/parser/tlv.c, which frees a nested record's GWEN_DB node when parsing of its contents fails but continues processing and adds the freed node to the parent instead of returning. Attackers can supply a constructed BER-TLV record with unparseable contents, such as via a malicious chip card read by libchipcard, to corrupt heap memory.

CVSS 4.0 · 5.1 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-64478

ALSA: usb-audio: avoid kobject path lookup in DualSense match

In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: avoid kobject path lookup in DualSense match The DualSense jack-detection input handler verifies that a matching input device belongs to the same physical controller by building kobject path strings for both the input device and the USB audio device, then comparing the path prefix. This was observed when a weak physical connection caused the controller to rapidly disconnect and reconnect. During that repeated hotplug, snd_dualsense_ih_match() can run while the controller's USB device is being disconnected. kobject_get_path() walks ancestor kobjects and dereferences their names; if the USB device kobject name is no longer valid, this can fault in strlen(): RIP: 0010:strlen+0x10/0x30 Call Trace: kobject_get_path+0x34/0x150 snd_dualsense_ih_match+0x49/0xd0 [snd_usb_audio] input_register_device+0x566/0x6a0 ps_probe+0xb89/0x1590 [hid_playstation] The same ownership check can be done without building kobject path strings. The input device is parented below the HID device, USB interface and USB device, so walking the input device parent chain and comparing against the mixer USB device preserves the check without dereferencing kobject names during disconnect.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-125110

Rack: Rack::Static header_rules bypass via dot-segment normalization mismatch

Rack is a modular Ruby web server interface. Prior to 2.2.25, 3.1.23, and 3.2.8, Rack::Static serves a path after Utils.clean_path_info normalization but evaluates header_rules against a path that is only URL-decoded. An unauthenticated attacker can request a known file through raw or percent-encoded dot segments and receive it without path-specific security headers such as Content-Disposition or Content-Security-Policy. Applications that do not use path-specific header_rules are not affected. This issue is fixed in versions 2.2.25, 3.1.23, and 3.2.8.

CVSS 3.1 · 5.3 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-113970

Bluetooth Use-After-Free Leading to Process Memory Corruption

A use-after-free issue was addressed with improved memory management. This issue is fixed in HomeView Software Version 27.2, iOS 18.7.12 and iPadOS 18.7.12, iOS 26.7.3 and iPadOS 26.7.3, iOS 27.2.1 and iPadOS 27.2.1, macOS Golden Gate 27.2.1, macOS Sequoia 15.8.3, macOS Tahoe 26.7.3, tvOS 27.2.1, visionOS 27.2.1, watchOS 26.6.1, watchOS 27.2.1. An attacker in Bluetooth range may be able to corrupt process memory.

CVSS 3.1 · 8.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-125394

FreeRDP before 3.33.0 Use-After-Free via Stale Brush Cache Pointer

FreeRDP before 3.33.0 contains a heap use-after-free vulnerability in update_gdi_patblt(), update_gdi_polygon_cb() and update_gdi_mem3blt() that retain stale brush cache pointers. A malicious RDP server can resend CACHE_BRUSH to the same slot then send PATBLT, causing clients to read freed heap memory, disclosing data or crashing.

CVSS 4.0 · 5.3 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-124684

A use-after-free vulnerability exists in Samsung Escargot 5.0.2 in the buffer-access paths for ReloadableString and CompressibleString. Internal raw character accessors and the public StringRef::stringBufferAccessData() API did not preserve the lifetime of the underlying buffer while it remained in use. As a result, idle unloading or garbage-collection compression could release the buffer and leave a stale pointer. Subsequent access may cause the process to crash or, under allocation-dependent conditions, expose limited contents of another heap allocation. The issue was addressed by adding buffer-lifetime reference tracking and removing unsafe raw character accessors.

CVSS 3.1 · 5.7 Medium EPSS < 1% KEV · Not listed
Products
CVE-2026-125704

Gstreamer: gstreamer: use-after-free in gstreamer core buffer value deserialization

A use-after-free flaw was found in GStreamer core buffer value deserialization. When serialized buffer text contains an invalid character, an error path frees a mapped buffer before unmapping it. Applications that parse untrusted caps or structure data can reach a freed-buffer read and may crash. A network-facing GStreamer Data Protocol receiver can process such caps data without user interaction; further impact has not been established.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed