Export limit exceeded: 430143 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.

Search vulnerabilities

Results 430,143

Export CSV
CVE-2026-99752

drm/loongson: Handle buffer mapping failures when clearing a BO

In the Linux kernel, the following vulnerability has been resolved: drm/loongson: Handle buffer mapping failures when clearing a BO lsdc_bo_clear() ignores the return value from lsdc_bo_kmap() and writes to lbo->kptr unconditionally. When the first mapping of a newly allocated buffer fails, kptr is still NULL and the subsequent memset accesses it. Return the mapping error without touching the buffer and propagate it from lsdc_gem_object_create(). Install the GEM object functions before clearing so that drm_gem_object_put() can release the buffer correctly on failure. Do not add the failed object to the tracking list or return an uncleared buffer to the caller. Imported buffers still skip clearing, and successfully mapped buffers are cleared and unmapped as before. Tested on LS7A2000 with a one-shot range error in ttm_bo_kmap(). Its -EINVAL return reached userspace, the object was destroyed once, and no GEM handle was published. Normal create/map/zero/write/read/close cycles passed, with the tracked BO count and VRAM usage unchanged. AI assistance was used for the lifetime analysis, fix, fault-injection tools, build and test execution.

CVSS 3.1 · 4.7 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99754

scsi: target: Verify the iSCSI ISID is null-terminated

In the Linux kernel, the following vulnerability has been resolved: scsi: target: Verify the iSCSI ISID is null-terminated iscsi_parse_pr_out_transport_id() returns the ISID of a FORMAT CODE 01b TransportID as a pointer into the PERSISTENT RESERVE OUT parameter list, lowercased in place and never null-terminated. spc4r37 Table 508 requires the field to be null-terminated, but a non-conforming initiator can omit the NULL; when the ISID ends at the end of the received buffer, the pointer is not a C string. The registration code still consumes it as one: strcmp() in __core_scsi3_locate_pr_reg() and in the REGISTER AND MOVE path, and snprintf("%s") in __core_scsi3_do_alloc_registration(), which also reads its first 8 bytes unconditionally with get_unaligned_be64() - a NUL check does not bound that read. When the parameter list spans more than one page, transport_kmap_data_sg() maps it with vmap(), and the over-read walks off the end of the mapping into the vmalloc() guard page and oopses. Reproduced with a PR OUT REGISTER + SPEC_I_PT parameter list of exactly 8192 bytes whose final TransportID carries a 12-byte ISID without a terminating NUL: BUG: unable to handle page fault for address: ffffc9000138c000 RIP: 0010:strcmp+0xc/0x30 Call Trace: __core_scsi3_locate_pr_reg+0xd3/0x120 [target_core_mod] core_scsi3_decode_spec_i_port+0x8fc/0x13a0 [target_core_mod] core_scsi3_emulate_pro_register+0x73c/0x900 [target_core_mod] ... iscsi_target_rx_thread+0xef/0x1d0 [iscsi_target_mod] With a single-page parameter list the buffer is a kmap() direct mapping, so the over-read continues into the physically adjacent page instead of faulting. snprintf("%s") then copies whatever follows the ISID in memory into pr_reg_isid, and PR IN READ FULL STATUS reports the registration back to any initiator, turning the over-read into an info leak of kernel heap contents. Reproduced with a 4096-byte parameter list whose last TransportID ends at the end of the buffer with a 4-byte ISID and no NUL, interleaved with I/O to populate adjacent pages: the READ FULL STATUS response returned the ISID as "0xleak" followed by raw bytes that were not part of the parameter list. The snprintf() into pr_reg_isid[PR_REG_ISID_LEN] caps the echoed ISID at 15 characters, so at most 11 bytes past the buffer are leaked per command, but the PR OUT command is not rate limited. Any initiator that can send PR OUT to an iSCSI-exported LUN can trigger either variant, including a guest via vhost-scsi. Require 8 bytes to remain after the ",i,0x" separator, and a NUL inside the rest of the descriptor, before the ISID pointer is returned. REGISTER AND MOVE fails with TCM_INVALID_PARAMETER_LIST; on SPEC_I_PT no target port claims the malformed TransportID, and the command fails the same way.

CVSS 3.1 · 7.1 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99756

btrfs: prevent deleting the wrong subvolume by ID

In the Linux kernel, the following vulnerability has been resolved: btrfs: prevent deleting the wrong subvolume by ID When deleting a subvolume by ID, btrfs_ioctl_snap_destroy() first resolves the requested ID to a name, then looks up that name again under the parent directory lock. A concurrent rename can change which subvolume is associated with the name between these operations. Since the deletion path does not verify the ID of the resolved subvolume, it can delete a different subvolume while leaving the requested one intact. This was reproduced by repeatedly exchanging the names of two subvolumes using renameat2(RENAME_EXCHANGE) while deleting one of them by ID. The wrong subvolume was deleted in 9 out of 14 independent tests. Fix this by checking that the resolved subvolume ID matches the requested ID while holding the parent directory lock. Return -EAGAIN on a mismatch so that userspace can retry the operation instead of being told that the requested subvolume does not exist.

CVSS 3.1 · 6.3 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99758

sctp: account for chunk padding in sctp_init_cause()

In the Linux kernel, the following vulnerability has been resolved: sctp: account for chunk padding in sctp_init_cause() sctp_init_cause() accepts a chunk when skb_tailroom() can hold the cause header and the payload. sctp_addto_chunk() then writes 0-3 bytes of padding before that header so the chunk stays 4-byte aligned. The check does not include the padding, and the following skb_put() calls skb_over_panic() from softirq. Count the padding sctp_addto_chunk() is about to write. The cause length on the wire stays the header plus the payload. Found by LLM inspection, triggered and tested the fix.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-80188

BuddyBoss Addons <= 1.2.1 - Unauthenticated Account Takeover via Unverified Social Login Identity Tokens

The BuddyBoss Addons plugin for WordPress is vulnerable to Authentication Bypass leading to Account Takeover in versions up to, and including, 1.2.1. This is due to the Social Login REST endpoint trusting unverified Apple and Facebook identity-token claims and linking an attacker-controlled provider identifier to an existing WordPress user selected by the token’s email claim. This makes it possible for unauthenticated attackers who know a user’s email address to associate their provider identity with that account, including administrator accounts, and subsequently authenticate as the victim. Successful exploitation requires the BuddyBoss Platform plugin to be installed and active, with the Social Login module and selected provider enabled and configured. On sites with the separate BuddyBoss App JWT component, the vulnerable REST request can return an application token immediately.

CVSS 3.1 · 9.8 Critical EPSS n/a KEV · Not listed
Vendors
—
Products
—
CVE-2026-116442

Authentication Bypass via Replay in Dell PowerStore NDMP Service

Dell PowerStore SDNAS contains an authentication-bypass-by-replay vulnerability in the NAS NDMP service that could allow a network attacker to gain backup and restore control of the appliance.

CVSS 3.1 · 8.1 High EPSS < 1% KEV · Not listed
Vendors
CVE-2026-116441

Dell PowerStore Out-of-Bounds Write Vulnerability Enabling System-Level Code Execution

Dell PowerStore SDNAS contains an out-of-bounds write vulnerability in the storage-processor interconnect driver that could allow a malicious peer to execute code with system privileges.

CVSS 3.1 · 9.6 Critical EPSS < 1% KEV · Not listed
Vendors
CVE-2026-132896

Remote Code Execution via Kubernetes Executor in JetBrains TeamCity

In JetBrains TeamCity before 2026.2, 2026.1.4 remote code execution was possible via Kubernetes Executor settings

CVSS 3.1 · 7.2 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-132901

Improper Authorization allows cross‑project NuGet package publishing

In JetBrains TeamCity before 2026.2, 2026.1.4, 2025.11.8 improper authorization allowed publishing packages to NuGet feeds of other projects

CVSS 3.1 · 7.7 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-132904

Missing Authorization Permits Removal of VCS Roots

In JetBrains TeamCity before 2026.2, 2026.1.4, 2025.11.8 missing authorization allowed project viewers to remove VCS roots

CVSS 3.1 · 8.1 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-132906

Remote Code Execution via Native Code Loading in TeamCity Kotlin DSL Sandbox

In JetBrains TeamCity before 2026.2, 2026.1.4, 2025.11.8 remote code execution was possible via native code loading in the Kotlin DSL sandbox

CVSS 3.1 · 8.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-132910

Unauthenticated Denial of Service via Agent Protocol in JetBrains TeamCity

In JetBrains TeamCity before 2026.2, 2026.1.4, 2025.11.8 unauthenticated DoS via the agent protocol was possible

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-132920

SSRF via Connection Tests in JetBrains TeamCity

In JetBrains TeamCity before 2026.2, 2026.1.4 an SSRF via connection tests was possible for users without project edit permissions

CVSS 3.1 · 4.3 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-132921

Two‑Factor Authentication Bypass via Access Token Management in JetBrains TeamCity

In JetBrains TeamCity before 2026.2 two-factor authentication bypass was possible via access token management

CVSS 3.1 · 6.8 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-132922

XSS Vulnerability in TeamCity Unified Diff Page Syntax Highlighting

In JetBrains TeamCity before 2026.2, 2026.1.4 stored XSS in the unified diff page syntax highlighting was possible

CVSS 3.1 · 6.1 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-132924

Improper Authorization Allows Deletion of Perforce Workspaces in TeamCity

In JetBrains TeamCity before 2026.2, 2026.1.4 improper authorization allowed users with the Run build permission to delete Perforce workspaces

CVSS 3.1 · 5.4 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99413

xfs: fix buffer overruns in xfs_ioc_attr_list

In the Linux kernel, the following vulnerability has been resolved: xfs: fix buffer overruns in xfs_ioc_attr_list When we converted the al_offset array in struct xfs_attrlist into a VLA, the size of the object shrank by 4 bytes. Unfortunately, the buffer size validation in the attrlist ioctl wasn't updated to notice this, so the al_offset[0] assignment blindly writes off the end of the buffer. LOLLM noticed the omitted check and complained.

CVSS 3.1 · 4.4 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99414

ovl: skip copy up of empty security.capability

In the Linux kernel, the following vulnerability has been resolved: ovl: skip copy up of empty security.capability ovl_copy_xattr() gives up if it can't read an attribute that listxattr() has named. An empty security.capability, which anybody has been able to store on any file for a long time, is such a case: it is listed, and getxattr() has nothing to return for it. A file in a lower layer that carries one can't be copied up: it can't be written to, renamed or have its mode changed. There is nothing to copy if there are no data. Go on with the next one. [amir: treat -EINVAL as no capability too, and do the same in ovl_copy_up_meta_inode_data()]

CVSS 3.1 · 3.3 Low EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99415

ovl: set the revalidate flags after d_instantiate()

In the Linux kernel, the following vulnerability has been resolved: ovl: set the revalidate flags after d_instantiate() stat() of a file on an overlayfs mount triggers a kernel warning and fails with ECHILD if another task is creating that file at the same time. This happens on an overlay with a FUSE upper layer, which is the layer where overlayfs creates new files. Write access to a directory on such an overlay is all a user needs to run the two tasks. The revalidate flags are DCACHE_OP_REVALIDATE and DCACHE_OP_WEAK_REVALIDATE. They tell path walk to call ->d_revalidate() or ->d_weak_revalidate() on a dentry, so that the filesystem can check that the cached dentry is still valid. An overlay dentry only has one of these flags if a dentry in one of its layers has it. FUSE dentries have the first one. When a flag is set on an overlay dentry, path walk calls ovl_dentry_revalidate_common(). That function only expects a dentry without an inode in RCU walk, while the dentry is being destroyed. For such a dentry outside of RCU walk, it hits a WARN_ON() and returns -ECHILD. So a negative overlay dentry must never have the flags set. ovl_instantiate() breaks this rule. When a task creates a file, the overlay dentry for the new name is hashed but still negative. ovl_instantiate() then works in this order: - It copies the flags from the new upper dentry to the overlay dentry. - It calls ovl_get_inode(), which can sleep in a getxattr request to the FUSE server. - Only then does it call d_instantiate(). A second task that looks up the name between the first step and the last finds a negative dentry with the flags set and revalidates it. Reproduced with a FUSE server that delays its getxattr reply: stat() of a name that was being created hit the WARN_ON() and failed with ECHILD. Fix this by setting the flags after d_instantiate().

CVSS 3.1 · 2.5 Low EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99416

ovl: read the nlink xattr of every indexed non-dir

In the Linux kernel, the following vulnerability has been resolved: ovl: read the nlink xattr of every indexed non-dir With nfs_export=on, data written through a file handle to a lower file, i.e. a file that exists only in a lower layer of the overlay, can be lost on the next mount. A lookup of the file by name then returns -EIO. Also, a file with one name reports st_nlink 2 once it has been copied to the upper layer. After such a file is removed, its file handle can still open it until the next mount. Before a lower file is changed for the first time, overlayfs copies it to the writable upper layer. This is called copy up. The index directory is $workdir/index, where $workdir is the directory given by the workdir= option. Each entry is named after the file handle of a lower inode, so that overlayfs can get from the handle to the copied up inode. With nfs_export=on, copy up indexes every non-directory: it copies the file to an entry in the index directory and then hard links that entry into the upper directory. The index entry is an extra link to the upper inode, so overlayfs stores the link count that users should see in the overlay.nlink xattr. A file can also be opened by handle, either by an NFS client or by a process with CAP_DAC_READ_SEARCH calling open_by_handle_at(). If the file is not in the dcache, its overlay dentry is disconnected, i.e. it has no parent yet. Copy up then creates the index entry but no hard link in the upper directory. The index entry has i_nlink 1 and holds the only copy of the data written to the file. ovl_get_nlink() reads the stored count. Its caller passes a default, which the function returns if there is no stored count. If the lower inode has i_nlink 1, the function returns the default without reading the xattr. That was correct as long as only lower files with multiple links were indexed. On the next mount, ovl_verify_index() looks for orphans, i.e. index entries of files whose last name was removed. For an index entry with i_nlink 1, it passes a default of 0 to ovl_get_nlink() and treats a result of 0 as an orphan. Here the lower inode also has i_nlink 1, so the result is the default. ovl_indexdir_cleanup() then replaces the entry with a whiteout, which in the index marks a file as deleted. The written data is lost. A lookup by name then returns -EIO, because a whiteout as the index entry of a lower file that still exists is a bad index. ovl_get_inode() gets the wrong count the same way. Its default is the i_nlink of the upper inode, which includes the index entry, so a copied up file with one name reports st_nlink 2. When that name is removed, the count drops to 1 rather than 0. ovl_nlink_end() replaces the index entry with a whiteout only at a count of 0, so the entry stays, and the handle of the removed file still opens it. Reproduced by writing through open_by_handle_at() to an uncached lower file with one link. After a remount the data was lost, and the name returned EIO. Fix this by adding an argument to ovl_get_nlink() that says whether the caller found an index entry, and by skipping the xattr only if the caller found none. Known gaps: - An index entry that a kernel without this patch left behind for a removed file now stays, and the handle of that file keeps working. The entry has i_nlink 1 and a stored count of 1, just like the entry of a file that was only written by handle. Without this patch, the next mount treated it as an orphan.

CVSS 3.1 · 5.0 Medium EPSS < 1% KEV · Not listed
Vendors
Products