Export limit exceeded: 429899 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.

Export limit exceeded: 429899 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.

Search vulnerabilities

Results 429,899

Export CSV
CVE-2026-99755

ptp: fix use-after-free in extts_fifo_show() reading tsevqs unlocked

In the Linux kernel, the following vulnerability has been resolved: ptp: fix use-after-free in extts_fifo_show() reading tsevqs unlocked extts_fifo_show() walks ptp->tsevqs with list_count_nodes() and then list_first_entry() without holding ptp->tsevqs_lock, the spinlock that "protects tsevqs from concurrent access". Every other accessor of the list honours it: ptp_open() (list_add_tail), ptp_release() (list_del followed by kfree of the per-fd queue), ptp_clock_release() and ptp_clock_event() all take tsevqs_lock. extts_fifo_show() is the only one that does not. A per-fd timestamp queue is appended to tsevqs on open("/dev/ptpN") and removed and freed on close(), both under tsevqs_lock: scoped_guard(spinlock_irq, &ptp->tsevqs_lock) list_del(&queue->qlist); bitmap_free(queue->mask); kfree(queue); So a read of /sys/class/ptp/ptpN/fifo running concurrently with a close() of a /dev/ptpN fd can have list_count_nodes() walk into the queue that close() is removing and freeing, dereferencing freed memory (use-after-free) or a poisoned list pointer. Take tsevqs_lock around the list walk. The fifo only ever draws from the first queue, which is the registration-time queue created in ptp_clock_register() and freed only in ptp_clock_release(); that cannot run while the sysfs attribute is being read, so the dequeue from queue->buf under queue->lock may stay outside tsevqs_lock and the lock order is unchanged.

CVSS n/a EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99750

ksmbd: require DELETE access for delete-on-close opens

In the Linux kernel, the following vulnerability has been resolved: ksmbd: require DELETE access for delete-on-close opens smb2_open() accepts FILE_DELETE_ON_CLOSE on an existing file without DELETE in DesiredAccess. When the request asks only for FILE_READ_ATTRIBUTES or READ_CONTROL, it also skips inode_permission() and the parent directory MAY_WRITE | MAY_EXEC check that delete-on-close is meant to get. The file is then marked for deletion by a caller who could not delete it. The unlink happens later, in __ksmbd_inode_close(), when the last handle on the inode is closed, and it runs with the credentials of that handle. If the caller closes last, the unlink fails. If another user who can write the parent directory, such as the file's owner, still has the file open, the file is deleted when that user closes it. Until then new opens of the file fail with STATUS_DELETE_PENDING. So a user with only search permission on a directory can delete a file in it, or block opens of it, while the owner has it open. A MAXIMUM_ALLOWED open that also requests DELETE has the same problem. The requested access is replaced with the maximal access, which does not include DELETE when the caller cannot write the parent directory, and the later permission checks are skipped as already done. MS-FSA 2.1.5.1 requires an open with FILE_DELETE_ON_CLOSE and without DELETE in DesiredAccess to fail with STATUS_INVALID_PARAMETER, and Samba does the same. Add that check to the CreateOptions validation, using the generic-mapped DesiredAccess so that GENERIC_ALL still qualifies. This also refuses MAXIMUM_ALLOWED with FILE_DELETE_ON_CLOSE but no explicit DELETE, as MS-FSA and Samba do. When MAXIMUM_ALLOWED is requested with DELETE but the maximal access does not include DELETE, fail with STATUS_ACCESS_DENIED. With DELETE requested, delete-on-close opens go through the existing parent directory check.

CVSS n/a EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99749

ksmbd: enforce the read-only share flag when creating a stream

In the Linux kernel, the following vulnerability has been resolved: ksmbd: enforce the read-only share flag when creating a stream When a share is read-only, smb2_open() rejects opens that would create or truncate a file. Creating a named stream on an existing file with streams_xattr sets neither O_CREAT nor O_TRUNC, so it passes this check, and smb2_set_stream_name_xattr() then creates the stream. On a Time Machine share, opening a missing AFP_AfpInfo stream also writes one. A user who can write a file at the filesystem level can therefore add streams to it through a read-only share. Do not create a stream or synthesize AFP_AfpInfo when the share is not writable. Existing streams still open normally, and a missing stream opened with FILE_OPEN still returns STATUS_OBJECT_NAME_NOT_FOUND.

CVSS n/a EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99748

ksmbd: revert fsids on durable reconnect and replay failure

In the Linux kernel, the following vulnerability has been resolved: ksmbd: revert fsids on durable reconnect and replay failure On a durable handle reconnect or a request replay, smb2_open() switches to the SMB user's fsids before calling ksmbd_vfs_getattr(). If that call fails, the code jumps to err_out2 and skips ksmbd_revert_fsids() at err_out1. The user's credentials then stay installed on the shared ksmbd worker. Later work on that worker, including other users' requests, runs with the first user's fsuid, fsgid and supplementary groups. ksmbd_free_work_struct() also warns, because work->saved_cred is still set. Jump to err_out1 instead. No path is held at this point, so skipping the path_put() at err_out is correct.

CVSS n/a EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99747

ksmbd: fix NULL pointer dereference in session_user_name() and session_account_type()

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix NULL pointer dereference in session_user_name() and session_account_type() session_user_name() and session_account_type() dereference session->user without checking for NULL. A session can be published and exposed via the procfs session interface before authentication completes, during which session->user is NULL: show_proc_session() -> session_user_name(sess) -> user_guest(session->user) -> NULL->flags -> oops Guard both functions by treating a NULL session->user as an explicit not-yet-authenticated state rather than dereferencing it.

CVSS n/a EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99746

ASoC: SOF: Intel: hda-sdw-bpt: Stop active DMA before closing BPT streams

In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: Intel: hda-sdw-bpt: Stop active DMA before closing BPT streams When sdw_enable_stream() fails in intel_ace2x_bpt_send_async() after hda_sdw_bpt_send_async() has already started the TX and RX DMA streams, intel_ace2x_bpt_close_stream() invokes hda_sdw_bpt_close() directly without calling hda_sdw_bpt_wait(). As a result, hda_sdw_bpt_dma_deprepare() tears down the DMA buffers and BDL while the DMA hardware is still running. Disable any running TX or RX BPT DMA stream at the start of hda_sdw_bpt_close() before unmapping channels and depreparing DMA resources.

CVSS n/a EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99743

ksmbd: grant a POSIX ACL group entry only to the group's members

In the Linux kernel, the following vulnerability has been resolved: ksmbd: grant a POSIX ACL group entry only to the group's members When no ACE of the DACL matches the caller, Everyone or Authenticated Users, smb_check_perm_dacl() falls back to the file's POSIX ACL. It takes the first ACL_USER or ACL_GROUP entry whose id equals the caller's uid. For ACL_GROUP, this compares a gid with the caller's uid. A numerical match grants the group's permissions even when the caller is not a member. Match a group entry only when the caller is also in the group.

CVSS n/a EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99739

mm/shmem: fix truncate hang in large swap entry

In the Linux kernel, the following vulnerability has been resolved: mm/shmem: fix truncate hang in large swap entry Truncating a tmpfs file or memfd to a page-aligned size inside a large swap entry can loop indefinitely in shmem_undo_range(). The task holds the inode lock and cannot be killed. A large swap entry represents a whole swapped-out folio. For example, truncate a file whose pages 0-7 share one swap entry to four pages: [ 0 1 2 3 | 4 5 6 7 ] keep | discard ^ new EOF, start = 4 i_size has already been updated when boundary handling asks shmem_get_partial_folio() for page 4. Since it is swapped out, the helper calls shmem_get_folio() with SGP_READ. That rejects page 4 with -EINVAL because its starting offset equals i_size. Nothing is read back. The final scan cannot free the entry without losing pages 0-3. It skips it, restarts from start = 4, and finds it again indefinitely. An unaligned truncate avoids this particular failure because the requested page starts below i_size. Folios already in the page-cache cannot trigger it as the direct lookup will return them beyond EOF. Fix it by letting shmem_get_partial_folio() call shmem_swapin_folio() directly for swap entries. This bypasses the read path's i_size check, allowing the existing boundary handling to zero and split the folio. If swap-in returns a smaller folio, it also splits the swap entry so the final scan can free the entries beyond EOF. Retry the lookup if the entry changes during swap-in. Handling swap-in allocation failures remains broken and is unchanged by this commit. Even when shmem_swapin_folio() correctly returns -ENOMEM instead of -EEXIST, shmem_get_partial_folio() returns NULL and shmem_undo_range() skips boundary handling. If the large swap entry remains intact, truncation can still loop in the final scan, while hole punching can return without zeroing the boundary. This may read an entire large folio back from swap while holding i_rwsem, only to discard part of it. Avoiding that I/O would require splitting both the swap entry and any large folio still in the swap cache. That, however, is much bigger work.

CVSS n/a EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99736

mm/shmem: fix accounting of swapin-error markers

In the Linux kernel, the following vulnerability has been resolved: mm/shmem: fix accounting of swapin-error markers A failed swap read replaces the swap entry with a swapin-error marker in the page-cache and subtracts its pages from "alloced" and "swapped"; however, it leaves their block charge in place. Removing the marker during truncate then subtracts from "swapped" again. This can underflow the counters or make swapped reach zero while other pages remain swapped out, causing swapoff to loop without finding them. When installing the marker, subtract only from "swapped" and let shmem_recalc_inode() reduce "alloced" and release the block charge. Make shmem_free_swap() report successful removal separately from the number of swap pages freed, so removing a swapin-error marker does not subtract from "swapped" again. It's a bit confusing, but replacing a swapped out page by a swapin-error marker in shmem_set_folio_swapin_error() behaves as follows: Initially: alloced=1, swapped=1, nrpages=0 Calling shmem_recalc_inode(inode, 0, -1) -> swapped = 0 -> freed = 1 - 0 - 0 = 1 -> alloced -= freed -> alloced=0, swapped=0, block charge released

CVSS n/a EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99734

mm/shmem: make shmem_file() check the file's inode

In the Linux kernel, the following vulnerability has been resolved: mm/shmem: make shmem_file() check the file's inode shmem_file() only checks if file->f_mapping is a shmem mapping. This mapping can belong to another file, however, as with a Coda file backed by a tmpfs container after mmap(). So it does not guarantee that the file inode is an actual shmem inode. Seal handling and memfd preservation use this check before accessing shmem inode state, so they can access an inode of the wrong type. Let's make shmem_file() check the inode's file operations instead, to identify shmem inodes reliably. This will identify regular shmem inodes, including memfds and ordinary tmpfs files, independently of wrapper file operations. Use shmem_mapping() in collapse_file() instead to not change the behavior of collapse_file(): it operates on the page cache and uses mapping->host for shmem inode operations. Focusing on the file does not seem relevant.

CVSS n/a EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99732

mm/filemap: read mapping->a_ops->free_folio under i_lock

In the Linux kernel, the following vulnerability has been resolved: mm/filemap: read mapping->a_ops->free_folio under i_lock memory_failure() -> ... -> filemap_remove_folio() can read mapping->a_ops after the inode has been freed. Once the folio is deleted from the pagecache it no longer pins the mapping, so after i_lock is dropped e.g., a concurrent final iput() can evict and free the inode before filemap_free_folio() looks up mapping->a_ops->free_folio. Most callers hold a reference on the inode, but not all. Documentation/filesystems/vfs.rst explicitly states that ->free_folio() must not assume the original address_space mapping still exists. Fix it by loading ->free_folio while i_lock is still held, similar to what folio_unmap_invalidate() does. Inline filemap_free_folio() into its remaining caller such that delete_from_page_cache_batch() also just loads the callback before dropping the i_lock. The bug was found by code inspection and has not been reproduced. Fix generated by an LLM and sent by Josef Bacik in private. [ david: get rid of filemap_free_folio() entirely; improve patch description ]

CVSS n/a EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99729

mm/rmap: handle device-exclusive entries in folio_referenced_one()

In the Linux kernel, the following vulnerability has been resolved: mm/rmap: handle device-exclusive entries in folio_referenced_one() page_vma_mapped_walk() can return non-present device-exclusive entries, but folio_referenced_one() passes them to PTE young-bit accessors that require present PTEs. We must neither call clear_flush_young_ptes_notify() nor folio_pte_batch() with non-present entries. For example, clearing the young bit on non-present PTEs can corrupt the entry: on arm64 PTE_AF overlaps the swap type, so clearing it turns a device-exclusive entry into an ordinary swap entry. folio_pte_batch() will VM_WARN_ON_FOLIO. Apply the same approach as the previous fixes to e.g., damon_ptep_mkold(): treat these entries as old from the CPU's perspective and obtain their young state through the MMU notifier. Skip PTE batching and MGLRU look-around for non-present entries, and don't modify non-present PTEs.

CVSS n/a EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99727

mm/huge_memory: properly handle refcounted PUD mappings on fork

In the Linux kernel, the following vulnerability has been resolved: mm/huge_memory: properly handle refcounted PUD mappings on fork copy_huge_pud() copies device-DAX entries without taking a folio reference or updating mapcounts and the child's RSS. For example, MADV_GUARD_INSTALL sets VM_MAYBE_GUARD on a device-DAX VMA, forcing copy_page_range() to traverse the whole VMA on fork. Any remaining huge PUDs are then copied without accounting for the new mappings. Unmapping them in the child decrements accounting that was never added. Use vm_normal_page_pud() to identify refcounted mappings. Take a folio reference and add the child's PUD rmap and RSS accounting before installing the copied entry. Pass src and dst VMAs consistently instead of src and dst MM. Move the TODO.

CVSS n/a EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99725

cipso: fix optlen corruption in cipso_v4_delopt()

In the Linux kernel, the following vulnerability has been resolved: cipso: fix optlen corruption in cipso_v4_delopt() cipso_v4_delopt() recomputes the option length by walking the option buffer after the CIPSO option has been moved out. The walk then reads the stale bytes at the tail of the buffer as option data, and a crafted setsockopt(IP_OPTIONS) buffer can make it treat one of them as an option length, increasing opt->opt.optlen beyond the valid option data. The corrupted length stays on the socket and is later used as the copy length by getsockopt(IP_OPTIONS) and by the udp/raw/ping sendmsg paths, where it exceeds the size of the buffers they copy into. Compute the new length from the intact options before the move and subtract the CIPSO length, and fill the padding with IPOPT_END.

CVSS n/a EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99724

ntfs: don't allow compression on volumes with clusters larger than 4K

In the Linux kernel, the following vulnerability has been resolved: ntfs: don't allow compression on volumes with clusters larger than 4K On a volume made with "mkntfs -c 8192", a user can set FILE_ATTR_COMPRESSED on an empty file through system.ntfs_attrib. Writing to the file and reading it back after dropping the page cache then crashes: BUG: KASAN: slab-out-of-bounds in ntfs_read_compressed_block+0xa2c/0x2040 Read of size 8192 at addr ffff88804355a000 by task dd/106 The read path only handles clusters up to 4K. It copies each cluster out of a single page, and a compression block of 16 8K clusters does not fit in the 64K ntfs_compression_buffer. Loading an inode already rejects compressed data on such volumes. Reject the flag change the same way.

CVSS n/a EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99717

hwmon: (pmbus/q54sj108a2) Add missing NULL pointer check

In the Linux kernel, the following vulnerability has been resolved: hwmon: (pmbus/q54sj108a2) Add missing NULL pointer check When CONFIG_DEBUG_FS is enabled and per-client PMBus debugfs directory creation fails during pmbus_do_probe(), q54sj108a2_probe() passes the NULL pointer returned by pmbus_get_debugfs_dir() to debugfs_create_dir() without validation, creating its debugfs directory at the debugfs root instead of under the client directory. If pmbus_init_debugfs() fails to create the client directory, data->debugfs is left as NULL or an ERR_PTR, which pmbus_get_debugfs_dir() converts to NULL. Passing a NULL parent to debugfs_create_dir() places q54sj108a2_dir in the root of the debugfs filesystem and populates it with attribute files whose private data pointers reference psu->debugfs_entries. Because this root-level directory is outside the client debugfs hierarchy, PMBus core cleanup does not remove it on device unbind, leaking the debugfs entries and causing a use-after-free of the devm-allocated struct q54sj108a2_data if the orphaned files are accessed via q54sj108a2_debugfs_read() or q54sj108a2_debugfs_write() after device removal. Fix the problem by adding the missing NULL pointer check.

CVSS n/a EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99716

hwmon: (coretemp) Set nr_cores only after core_data allocation succeeds

In the Linux kernel, the following vulnerability has been resolved: hwmon: (coretemp) Set nr_cores only after core_data allocation succeeds In init_temp_data(), pdata->nr_cores is populated from topology_num_cores_per_package() before allocating pdata->core_data. If that allocation fails, init_temp_data() returns NULL with pdata->core_data still NULL and pdata->nr_cores set to a positive value. coretemp_add_core() logs the error without failing coretemp_cpu_online(), so the CPU still comes online with pdata->hwmon_dev registered. When the CPU is later taken offline (or the module is unloaded), coretemp_cpu_offline() calls get_temp_data(pd, cpu), which loops up to pdata->nr_cores and dereferences the NULL pdata->core_data pointer. Store the core count in a local variable and assign pdata->nr_cores only after pdata->core_data is allocated, preserving the invariant that pdata->nr_cores is zero whenever pdata->core_data is NULL.

CVSS n/a EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99711

KVM: nVMX: Process each host MSR entry at most once when unwinding failed VM-Entry

In the Linux kernel, the following vulnerability has been resolved: KVM: nVMX: Process each host MSR entry at most once when unwinding failed VM-Entry Add a missing "break" in the inner for-loop of the open coded mess that unwinds MSRs back to the pre-VM-Enter state when VMLAUNCH/VMRESUME VM-Fails due to a consistency check that is caught by hardware but missed by KVM. I.e. move on to the next MSR in the VM-Entry load list after performing a write using a value found in the VM-Exit load list. Processing *every* matching entry in the VM-Exit load list makes the processing quadratic, which is problematic if the load lists are full of MSRs that are expensive to emulate. E.g. writing APIC_BASE triggers kvm_recalculate_apic_map() and a whole pile of unnecessary work. Functionally, arbitrarily restoring the value of the first matching entry is "fine", because none of this is architecturally correct: the load lists are never supposed to have been used in the first place. In practice, it's likely a moot point as no well-behaved VMM will have multiple, diverging entries in the load lists.

CVSS n/a EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99690

ocfs2: cache the mount context for dentry lock callbacks

In the Linux kernel, the following vulnerability has been resolved: ocfs2: cache the mount context for dentry lock callbacks ocfs2_drop_dentry_lock() drops the inode reference before releasing the DENTRY lock. This lets inode eviction release the local inode and open locks before a remote unlink can proceed past the DENTRY lock. A DLM callback can still arrive before the DENTRY lock has been dropped. ocfs2_get_dentry_osb() obtains the mount context through dl_inode->i_sb, which can access a freed inode when the downconvert thread drops the last inode reference in its post-unlock callback: Downconvert thread DLM callback thread ------------------ ------------------- ocfs2_process_blocked_lock() ocfs2_dentry_post_unlock() ocfs2_dentry_lock_put() ocfs2_drop_dentry_lock() iput(dl->dl_inode) [inode reclaimed after RCU] ocfs2_blocking_ast() ocfs2_get_dentry_osb() dl->dl_inode->i_sb ocfs2_simple_drop_lockres() Store the mount context in the DENTRY lock resource's l_priv field and use the default mount-context lookup. Recover the containing dentry lock with container_of(), as already done for refcount locks, and remove ocfs2_get_dentry_osb(). ocfs2_dismount_volume() shuts down the DLM before freeing the mount context, so callbacks can use it without accessing the inode. Preserve the existing iput-before-unlock order to avoid delaying local inode and open lock release until after the DENTRY lock is released.

CVSS n/a EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99687

vhost-scsi: zero misaligned I/O bounce pages

In the Linux kernel, the following vulnerability has been resolved: vhost-scsi: zero misaligned I/O bounce pages The misaligned I/O fallback copies the full bounce scatterlist to the request buffer during completion. If a data-in command transfers less than requested, part of a newly allocated bounce page can remain unwritten. Allocate bounce pages with __GFP_ZERO so all bytes copied during completion have a defined value. This path is already the slow fallback for misaligned I/O, so the added initialization cost is acceptable. Found during an LLM-assisted source audit and validated with a QEMU/KVM vhost-scsi target using misaligned data-in commands.

CVSS n/a EPSS < 1% KEV · Not listed
Vendors
Products