Export limit exceeded: 429892 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.

Export limit exceeded: 429892 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.

Search vulnerabilities

Results 429,892

Export CSV
CVE-2026-99749

ksmbd: enforce the read-only share flag when creating a stream

In the Linux kernel, the following vulnerability has been resolved: ksmbd: enforce the read-only share flag when creating a stream When a share is read-only, smb2_open() rejects opens that would create or truncate a file. Creating a named stream on an existing file with streams_xattr sets neither O_CREAT nor O_TRUNC, so it passes this check, and smb2_set_stream_name_xattr() then creates the stream. On a Time Machine share, opening a missing AFP_AfpInfo stream also writes one. A user who can write a file at the filesystem level can therefore add streams to it through a read-only share. Do not create a stream or synthesize AFP_AfpInfo when the share is not writable. Existing streams still open normally, and a missing stream opened with FILE_OPEN still returns STATUS_OBJECT_NAME_NOT_FOUND.

CVSS n/a EPSS n/a KEV · Not listed
Vendors
Products
CVE-2026-99748

ksmbd: revert fsids on durable reconnect and replay failure

In the Linux kernel, the following vulnerability has been resolved: ksmbd: revert fsids on durable reconnect and replay failure On a durable handle reconnect or a request replay, smb2_open() switches to the SMB user's fsids before calling ksmbd_vfs_getattr(). If that call fails, the code jumps to err_out2 and skips ksmbd_revert_fsids() at err_out1. The user's credentials then stay installed on the shared ksmbd worker. Later work on that worker, including other users' requests, runs with the first user's fsuid, fsgid and supplementary groups. ksmbd_free_work_struct() also warns, because work->saved_cred is still set. Jump to err_out1 instead. No path is held at this point, so skipping the path_put() at err_out is correct.

CVSS n/a EPSS n/a KEV · Not listed
Vendors
Products
CVE-2026-99747

ksmbd: fix NULL pointer dereference in session_user_name() and session_account_type()

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix NULL pointer dereference in session_user_name() and session_account_type() session_user_name() and session_account_type() dereference session->user without checking for NULL. A session can be published and exposed via the procfs session interface before authentication completes, during which session->user is NULL: show_proc_session() -> session_user_name(sess) -> user_guest(session->user) -> NULL->flags -> oops Guard both functions by treating a NULL session->user as an explicit not-yet-authenticated state rather than dereferencing it.

CVSS n/a EPSS n/a KEV · Not listed
Vendors
Products
CVE-2026-99746

ASoC: SOF: Intel: hda-sdw-bpt: Stop active DMA before closing BPT streams

In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: Intel: hda-sdw-bpt: Stop active DMA before closing BPT streams When sdw_enable_stream() fails in intel_ace2x_bpt_send_async() after hda_sdw_bpt_send_async() has already started the TX and RX DMA streams, intel_ace2x_bpt_close_stream() invokes hda_sdw_bpt_close() directly without calling hda_sdw_bpt_wait(). As a result, hda_sdw_bpt_dma_deprepare() tears down the DMA buffers and BDL while the DMA hardware is still running. Disable any running TX or RX BPT DMA stream at the start of hda_sdw_bpt_close() before unmapping channels and depreparing DMA resources.

CVSS n/a EPSS n/a KEV · Not listed
Vendors
Products
CVE-2026-99744

net: atl1c: drop oversized RX frames instead of panicking

In the Linux kernel, the following vulnerability has been resolved: net: atl1c: drop oversized RX frames instead of panicking atl1c sizes its receive buffers from the netdev MTU plus a fixed set of L2 overheads, which comes to 1522 bytes at the default MTU. A link partner that sends a longer frame - in practice a MikroTik CCR2004-1G-2XS-PCIe, whose RouterOS side defaults to l2mtu 1600 while the host stays at MTU 1500 - makes the length reported by the RX return descriptor exceed what the hardware wrote, and skb_put() then either includes bytes that were never received or trips skb_over_panic and takes the host down. Compare the descriptor length against buffer_info->length, the length the hardware was given, rather than against skb_tailroom(): the skb carries 64 bytes of slack for the DMA erratum, so tailroom is larger than the DMA buffer and a frame in between would pass the check and still be delivered with a tail the device never wrote. The same test rejects frames shorter than ETH_HLEN + ETH_FCS_LEN; before this change a reported length below ETH_FCS_LEN underflowed in skb_put(). The frame is dropped with kfree_skb_reason(SKB_DROP_REASON_PKT_TOO_BIG) so drop_monitor and the kfree_skb tracepoint see it, and counted through dev_core_stats_rx_dropped_inc(), which survives atl1c_get_stats() overwriting the hardware counters on every read. It also counts as work: atl1c_clean_rfd() has already recycled the RFD, and the refill at the end of the poll only runs when work_done is non-zero, so sustained oversized traffic would otherwise drain the ring and stop RX. Tested on a MikroTik CCR2004-1G-2XS-PCIe (4x AR8151) in a Proxmox VE host, with atl1c built from a DKMS tree carrying this change: the l2mtu-1600 traffic that panics the stock driver is dropped and counted with the patch applied, and received normally once the host MTU is raised to match. This complements commit 36c2009d90f2 ("net: atl1c: fix soft lockup on out-of-range tpd_cons read"), which fixed the TX side of the same "host dies while the card resets" problem.

CVSS n/a EPSS n/a KEV · Not listed
Vendors
Products
CVE-2026-99743

ksmbd: grant a POSIX ACL group entry only to the group's members

In the Linux kernel, the following vulnerability has been resolved: ksmbd: grant a POSIX ACL group entry only to the group's members When no ACE of the DACL matches the caller, Everyone or Authenticated Users, smb_check_perm_dacl() falls back to the file's POSIX ACL. It takes the first ACL_USER or ACL_GROUP entry whose id equals the caller's uid. For ACL_GROUP, this compares a gid with the caller's uid. A numerical match grants the group's permissions even when the caller is not a member. Match a group entry only when the caller is also in the group.

CVSS n/a EPSS n/a KEV · Not listed
Vendors
Products
CVE-2026-99740

mm/shmem: stop retrying folios that cannot be split

In the Linux kernel, the following vulnerability has been resolved: mm/shmem: stop retrying folios that cannot be split A fault or collapse can insert a large folio crossing EOF after shmem_undo_range() has handled the boundary folios. If splitting that folio fails, truncate_inode_partial_folio() retains it when it is dirty. The final scan then repeatedly finds it because it restarts from an unchanged start. Truncation keeps the inode lock and ignores fatal signals while looping. A concurrent unlink() can then block other directory operations while holding the directory lock and waiting for the file's lock. Advance start past the retained folio, whose truncated part has already been zeroed. Do not move start backwards if the failed split has shrunk the folio. Fix generated by an LLM and sent by Chris Mason in private. [ david: split fixes, simplify descriptions, adjust comments ]

CVSS n/a EPSS n/a KEV · Not listed
Vendors
Products
CVE-2026-99739

mm/shmem: fix truncate hang in large swap entry

In the Linux kernel, the following vulnerability has been resolved: mm/shmem: fix truncate hang in large swap entry Truncating a tmpfs file or memfd to a page-aligned size inside a large swap entry can loop indefinitely in shmem_undo_range(). The task holds the inode lock and cannot be killed. A large swap entry represents a whole swapped-out folio. For example, truncate a file whose pages 0-7 share one swap entry to four pages: [ 0 1 2 3 | 4 5 6 7 ] keep | discard ^ new EOF, start = 4 i_size has already been updated when boundary handling asks shmem_get_partial_folio() for page 4. Since it is swapped out, the helper calls shmem_get_folio() with SGP_READ. That rejects page 4 with -EINVAL because its starting offset equals i_size. Nothing is read back. The final scan cannot free the entry without losing pages 0-3. It skips it, restarts from start = 4, and finds it again indefinitely. An unaligned truncate avoids this particular failure because the requested page starts below i_size. Folios already in the page-cache cannot trigger it as the direct lookup will return them beyond EOF. Fix it by letting shmem_get_partial_folio() call shmem_swapin_folio() directly for swap entries. This bypasses the read path's i_size check, allowing the existing boundary handling to zero and split the folio. If swap-in returns a smaller folio, it also splits the swap entry so the final scan can free the entries beyond EOF. Retry the lookup if the entry changes during swap-in. Handling swap-in allocation failures remains broken and is unchanged by this commit. Even when shmem_swapin_folio() correctly returns -ENOMEM instead of -EEXIST, shmem_get_partial_folio() returns NULL and shmem_undo_range() skips boundary handling. If the large swap entry remains intact, truncation can still loop in the final scan, while hole punching can return without zeroing the boundary. This may read an entire large folio back from swap while holding i_rwsem, only to discard part of it. Avoiding that I/O would require splitting both the swap entry and any large folio still in the swap cache. That, however, is much bigger work.

CVSS n/a EPSS n/a KEV · Not listed
Vendors
Products
CVE-2026-99738

mm/shmem: preserve allocation errors when swapping in large entries

In the Linux kernel, the following vulnerability has been resolved: mm/shmem: preserve allocation errors when swapping in large entries shmem_swapin_folio() adjusts swap to the requested slot within a large swap entry before allocating a folio. If allocation or charging fails, the error path compares this adjusted value with the original entry still stored in the XArray in shmem_confirm_swap(). Unless the index is at the start of the entry, this turns -ENOMEM into -EEXIST even though nothing changed. The caller retries -EEXIST, so persistent allocation failures can leave the task spinning instead of returning the error. Restore swap to index_entry on allocation failure so the existing error path checks the original entry. This preserves the allocation error if the entry is unchanged and still retries if it changed concurrently.

CVSS n/a EPSS n/a KEV · Not listed
Vendors
Products
CVE-2026-99736

mm/shmem: fix accounting of swapin-error markers

In the Linux kernel, the following vulnerability has been resolved: mm/shmem: fix accounting of swapin-error markers A failed swap read replaces the swap entry with a swapin-error marker in the page-cache and subtracts its pages from "alloced" and "swapped"; however, it leaves their block charge in place. Removing the marker during truncate then subtracts from "swapped" again. This can underflow the counters or make swapped reach zero while other pages remain swapped out, causing swapoff to loop without finding them. When installing the marker, subtract only from "swapped" and let shmem_recalc_inode() reduce "alloced" and release the block charge. Make shmem_free_swap() report successful removal separately from the number of swap pages freed, so removing a swapin-error marker does not subtract from "swapped" again. It's a bit confusing, but replacing a swapped out page by a swapin-error marker in shmem_set_folio_swapin_error() behaves as follows: Initially: alloced=1, swapped=1, nrpages=0 Calling shmem_recalc_inode(inode, 0, -1) -> swapped = 0 -> freed = 1 - 0 - 0 = 1 -> alloced -= freed -> alloced=0, swapped=0, block charge released

CVSS n/a EPSS n/a KEV · Not listed
Vendors
Products
CVE-2026-99734

mm/shmem: make shmem_file() check the file's inode

In the Linux kernel, the following vulnerability has been resolved: mm/shmem: make shmem_file() check the file's inode shmem_file() only checks if file->f_mapping is a shmem mapping. This mapping can belong to another file, however, as with a Coda file backed by a tmpfs container after mmap(). So it does not guarantee that the file inode is an actual shmem inode. Seal handling and memfd preservation use this check before accessing shmem inode state, so they can access an inode of the wrong type. Let's make shmem_file() check the inode's file operations instead, to identify shmem inodes reliably. This will identify regular shmem inodes, including memfds and ordinary tmpfs files, independently of wrapper file operations. Use shmem_mapping() in collapse_file() instead to not change the behavior of collapse_file(): it operates on the page cache and uses mapping->host for shmem inode operations. Focusing on the file does not seem relevant.

CVSS n/a EPSS n/a KEV · Not listed
Vendors
Products
CVE-2026-99732

mm/filemap: read mapping->a_ops->free_folio under i_lock

In the Linux kernel, the following vulnerability has been resolved: mm/filemap: read mapping->a_ops->free_folio under i_lock memory_failure() -> ... -> filemap_remove_folio() can read mapping->a_ops after the inode has been freed. Once the folio is deleted from the pagecache it no longer pins the mapping, so after i_lock is dropped e.g., a concurrent final iput() can evict and free the inode before filemap_free_folio() looks up mapping->a_ops->free_folio. Most callers hold a reference on the inode, but not all. Documentation/filesystems/vfs.rst explicitly states that ->free_folio() must not assume the original address_space mapping still exists. Fix it by loading ->free_folio while i_lock is still held, similar to what folio_unmap_invalidate() does. Inline filemap_free_folio() into its remaining caller such that delete_from_page_cache_batch() also just loads the callback before dropping the i_lock. The bug was found by code inspection and has not been reproduced. Fix generated by an LLM and sent by Josef Bacik in private. [ david: get rid of filemap_free_folio() entirely; improve patch description ]

CVSS n/a EPSS n/a KEV · Not listed
Vendors
Products
CVE-2026-99731

mm/filemap: don't lose a folio lock wakeup to a signal

In the Linux kernel, the following vulnerability has been resolved: mm/filemap: don't lose a folio lock wakeup to a signal An exclusive waiter in folio_wait_bit_common() can leave the wait loop because of a fatal signal, then be woken by folio_unlock() before finish_wait(). If the waker did not hand over the lock, the waiter returns -EINTR without trying to acquire it. folio_wake_bit() stops after waking the first exclusive waiter, so this loses the wakeup and can leave other waiters asleep indefinitely on an unlocked folio. After finish_wait(), let a waiter woken without a lock handoff try once more to acquire the lock. If successful, return success so the caller's eventual unlock wakes the next waiter. Otherwise, the current lock owner will do so. Fix generated by an LLM and sent by Josef Bacik in private. [ david: clarify and simplify comment + description ]

CVSS n/a EPSS n/a KEV · Not listed
Vendors
Products
CVE-2026-99729

mm/rmap: handle device-exclusive entries in folio_referenced_one()

In the Linux kernel, the following vulnerability has been resolved: mm/rmap: handle device-exclusive entries in folio_referenced_one() page_vma_mapped_walk() can return non-present device-exclusive entries, but folio_referenced_one() passes them to PTE young-bit accessors that require present PTEs. We must neither call clear_flush_young_ptes_notify() nor folio_pte_batch() with non-present entries. For example, clearing the young bit on non-present PTEs can corrupt the entry: on arm64 PTE_AF overlaps the swap type, so clearing it turns a device-exclusive entry into an ordinary swap entry. folio_pte_batch() will VM_WARN_ON_FOLIO. Apply the same approach as the previous fixes to e.g., damon_ptep_mkold(): treat these entries as old from the CPU's perspective and obtain their young state through the MMU notifier. Skip PTE batching and MGLRU look-around for non-present entries, and don't modify non-present PTEs.

CVSS n/a EPSS n/a KEV · Not listed
Vendors
Products
CVE-2026-99727

mm/huge_memory: properly handle refcounted PUD mappings on fork

In the Linux kernel, the following vulnerability has been resolved: mm/huge_memory: properly handle refcounted PUD mappings on fork copy_huge_pud() copies device-DAX entries without taking a folio reference or updating mapcounts and the child's RSS. For example, MADV_GUARD_INSTALL sets VM_MAYBE_GUARD on a device-DAX VMA, forcing copy_page_range() to traverse the whole VMA on fork. Any remaining huge PUDs are then copied without accounting for the new mappings. Unmapping them in the child decrements accounting that was never added. Use vm_normal_page_pud() to identify refcounted mappings. Take a folio reference and add the child's PUD rmap and RSS accounting before installing the copied entry. Pass src and dst VMAs consistently instead of src and dst MM. Move the TODO.

CVSS n/a EPSS n/a KEV · Not listed
Vendors
Products
CVE-2026-99726

drm/v3d: Widen cache_clean_lock over the whole L2TCACTL sequence

In the Linux kernel, the following vulnerability has been resolved: drm/v3d: Widen cache_clean_lock over the whole L2TCACTL sequence v3d_clean_caches() and v3d_flush_l2t() both write the single L2TCACTL register and poll its status bits. The mutex cache_clean_lock exists to serialize them, but v3d_clean_caches() only took the lock around its final FLM_CLEAN write. These functions run concurrently: v3d_flush_l2t() is issued from the BIN/RENDER/CSD invalidate path while v3d_clean_caches() runs from the CACHE_CLEAN queue, and each queue's scheduler uses its own ordered workqueue, so their run_job callbacks execute in parallel. Because clean locked only its final write, a concurrent flush can write L2TCACTL during clean's unlocked phase. Both use non read-modify-write writes to the one register, so whichever lands last wins: clean's TMUWCF write can land on the flush's in-flight L2TFLS invalidate, triggering the GFXH-1897 hazard of writing L2TCACTL while a flush is pending. Hold cache_clean_lock across the entire L2TCACTL access sequence so it is fully mutually exclusive with v3d_flush_l2t(), which already takes the lock around its own write.

CVSS n/a EPSS n/a KEV · Not listed
Vendors
Products
CVE-2026-99725

cipso: fix optlen corruption in cipso_v4_delopt()

In the Linux kernel, the following vulnerability has been resolved: cipso: fix optlen corruption in cipso_v4_delopt() cipso_v4_delopt() recomputes the option length by walking the option buffer after the CIPSO option has been moved out. The walk then reads the stale bytes at the tail of the buffer as option data, and a crafted setsockopt(IP_OPTIONS) buffer can make it treat one of them as an option length, increasing opt->opt.optlen beyond the valid option data. The corrupted length stays on the socket and is later used as the copy length by getsockopt(IP_OPTIONS) and by the udp/raw/ping sendmsg paths, where it exceeds the size of the buffers they copy into. Compute the new length from the intact options before the move and subtract the CIPSO length, and fill the padding with IPOPT_END.

CVSS n/a EPSS n/a KEV · Not listed
Vendors
Products
CVE-2026-99724

ntfs: don't allow compression on volumes with clusters larger than 4K

In the Linux kernel, the following vulnerability has been resolved: ntfs: don't allow compression on volumes with clusters larger than 4K On a volume made with "mkntfs -c 8192", a user can set FILE_ATTR_COMPRESSED on an empty file through system.ntfs_attrib. Writing to the file and reading it back after dropping the page cache then crashes: BUG: KASAN: slab-out-of-bounds in ntfs_read_compressed_block+0xa2c/0x2040 Read of size 8192 at addr ffff88804355a000 by task dd/106 The read path only handles clusters up to 4K. It copies each cluster out of a single page, and a compression block of 16 8K clusters does not fit in the 64K ntfs_compression_buffer. Loading an inode already rejects compressed data on such volumes. Reject the flag change the same way.

CVSS n/a EPSS n/a KEV · Not listed
Vendors
Products
CVE-2026-99721

hwmon: (aquacomputer_d5next) reject short status reports

In the Linux kernel, the following vulnerability has been resolved: hwmon: (aquacomputer_d5next) reject short status reports The HID raw_event callback runs before HID core validates the received report length. aqc_raw_event() reads device-specific status fields at fixed offsets, including multi-byte values, without first ensuring that the received buffer contains every field. A truncated report can therefore cause out-of-bounds reads and update hwmon state with unrelated data. The required length differs between supported devices and cannot be derived from the HID report descriptor. Define the minimum length needed by each asynchronous status format, select it while configuring the device, and reject reports that do not contain the last field accessed by that format. Keep the published length zero until probe configuration is complete, which also excludes legacy devices whose status is retrieved through feature reports.

CVSS n/a EPSS n/a KEV · Not listed
Vendors
Products
CVE-2026-99720

hwmon: chipcap2: fix IRQ teardown ordering

In the Linux kernel, the following vulnerability has been resolved: hwmon: chipcap2: fix IRQ teardown ordering The threaded IRQs are currently requested before the hwmon device is registered. Since devres releases resources in reverse order, the hwmon device is unregistered before the IRQs are freed during driver teardown. An IRQ may therefore still run after the hwmon device has been released and access the stale data->hwmon pointer. Separate IRQ discovery from IRQ registration so that the IRQ numbers and alarm visibility flags are initialized before registering the hwmon device while the IRQs are released before the hwmon device during devres cleanup.

CVSS n/a EPSS n/a KEV · Not listed
Vendors
Products