Export limit exceeded: 429927 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.

Search vulnerabilities

Results 429,927

Export CSV
CVE-2026-99638

net/sched: clamp skb->queue_mapping before indexing the tx queue

In the Linux kernel, the following vulnerability has been resolved: net/sched: clamp skb->queue_mapping before indexing the tx queue This issue was caught by Sashiko (nipa). A producer-side path cap is already merged (ea4d4b5dddb5); this patch adds the matching consumer-side caps. The issue: The tx queue is picked and capped in netdev_core_pick_tx() before the __dev_xmit_skb() qdisc enqueue path. A tc BPF program running inside an egress qdisc (not clsact) can then change __sk_buff->queue_mapping; that store is never re-checked. bpf_convert_ctx_access() bounds it only by NO_QUEUE_MAPPING, not by the device's queue count. Two consumers read the stale value: - On dequeue, qdisc_restart() calls netdev_get_tx_queue(), which indexes dev->_tx[]. netdev_get_tx_queue() guards it with just a DEBUG_NET_WARN_ON_ONCE, so sch_direct_xmit() takes the out-of-bounds txq->_xmit_lock and writes txq->xmit_lock_owner past the end of the allocation on non-lltx devices such as ifb. Drivers that index their rings from skb_get_queue_mapping() (ex: ifb) go out of range the same way. - On enqueue, taprio_enqueue() indexes q->qdiscs[] with the same value; the array is sized dev->num_tx_queues. A duplicating netem on a child qdisc clones the skb and re-enqueues the clone at the taprio root (qdisc_root_bh()) through a direct rootq->enqueue() call, so the value reaches taprio_enqueue() before any dequeue cap runs. The Fix: Cap the mapping at the consumers and write the capped value back, so the qdisc's _tx[] lookup, the taprio q->qdiscs[] lookup and any later driver read stay in range. On the dequeue side the cap folds into the dequeue path instead of a separate walk over the returned list: dequeue_skb() caps the head, and each bulk helper caps the element it appends. For a qdisc that is not TCQ_F_ONETXQUEUE, netdev_cap_txqueue() logs a ratelimited notice and selects queue 0. A TCQ_F_ONETXQUEUE qdisc is bound to a single tx queue: dequeue_skb() uses q->dev_queue for the frozen check, the BQL limit and the trace point, while qdisc_restart() transmits on the skb's queue. Capping an out-of-range mapping to queue 0 would therefore send a per-queue child's skb through a different queue than the one it was dequeued for. On mq, mqprio, taprio and htb offload children, a stopped queue 0 could then park the list in q->gso_skb, and the later wake would schedule queue 0's own child instead of this qdisc. Pin a TCQ_F_ONETXQUEUE mapping to the qdisc's own queue to keep the documented invariant. The pin covers every mapping, not only an out-of-range one: an in-range mapping that a filter sets on one of those per-queue children is rewritten to the child's own queue, and this path does not call netdev_cap_txqueue(), so it logs no notice. On a single-queue device qdisc_create() sets TCQ_F_ONETXQUEUE, so the one-queue trigger described below also takes this branch and is corrected without a notice. That also keeps a bulk list on one queue by construction: every element of a TCQ_F_ONETXQUEUE qdisc, including a follower changed by a filter, is pinned to q->dev_queue before it is appended. The fast bulk helper therefore needs no head comparison and no skb_bad_txq requeue; the slow helper, used only by non-ONETXQUEUE qdiscs, still compares and requeues a mismatched follower, where a wake on any queue reschedules q. On the enqueue side taprio_enqueue() caps the mapping against real_num_tx_queues and writes it back before selecting q->qdiscs[queue], so a duplicating child cannot steer the clone out of the array. Conditions to recreate the bug: The dequeue path: load a SCHED_CLS or SCHED_ACT program that stores __sk_buff->queue_mapping (a tc BPF action is enough), attach it to a transmit qdisc (for example a matchall filter on a prio root), and send a packet. With a 1-queue device a store of 1 indexes one past dev->_tx[]. Under KASAN with panic_on_warn=1 the unfixed kernel faults with "BUG: KASAN: slab-out- ---truncated---

CVSS n/a EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-131165

Incorrect check of permissions in scheduled exports

The fix for CVE-2026-127174 published in 2026.9.2 is incomplete: When expanding an export from "some events" to "all events", it is checked that the acting user is part of a team with permission to all events, but this check is not correctly bound to the organizer and could also be passed through permissions on a different organizer.

CVSS 4.0 · 2.1 Low EPSS n/a KEV · Not listed
Vendors
—
Products
—
CVE-2026-131169

Permissions are copied when copying scheduled exports

When a scheduled export is copied, the permissions of the original export's owner are used when running the export. This allows users to create exports with data they usually shouldn't be able to see, but only within events they already have permissions to.

CVSS 4.0 · 2.1 Low EPSS n/a KEV · Not listed
Vendors
—
Products
—
CVE-2026-131164

Link to parent order or ticket exposed in certain conditions

When a ticket holder opens the ticket page of a ticket that is an add-on (possible since 2026.9) the HTML content of the page contains the secret link to the parent product, creating a potential data leak. Under different specific conditions, when a ticket contains user-uploaded files in response to a question, the page can even contain the secret link to the entire order.

CVSS 4.0 · 2.3 Low EPSS n/a KEV · Not listed
Vendors
—
Products
—
CVE-2026-131168

Validation bypass allows buying sold-out products

A legacy code path allowed users to craft requests to a ticket shop that bypass some validation steps for the selected products. In consequence, this could lead to an attacker purchasing products that are in fact sold out.

CVSS 4.0 · 6.6 Medium EPSS n/a KEV · Not listed
Vendors
—
Products
—
CVE-2026-131170

Insufficient validation of payment status for Stripe

Our payment integration with Stripe did not properly validate payment status responses. An attacker could use a successful payment status response from one payment and supply it to the system for a different payment, gaining access to multiple valid tickets with only one payment. However, the attack requires knowledge of a valid charge ID from the same event which we believe is usually not exposed to users. To simplify attack surface, the fix removes support for incoming webhooks regarding payments created through Stripe's old "source" API. pretix stopped creating payments using this API in 2024.1 for most payment methods and in 2024.9 for all payment methods.

CVSS 4.0 · 6.3 Medium EPSS n/a KEV · Not listed
Vendors
—
Products
—
CVE-2026-131166

Incorrect device security profile

When configuring a device to use the security profile "pretixSCAN (kiosk mode, no order sync, no search)", the API search endpoint introduced in pretix 4.12 was not blocked correctly. This theoretically allows these devices to perform searches for orders even if that was not intended. If the device is in kiosk mode, the search button will still be hidden from users.

CVSS 4.0 · 6 Medium EPSS n/a KEV · Not listed
Vendors
—
Products
—
CVE-2026-131167

Unsafe usage of return values

pretix offloads certain processes to background tasks that are run by a different server to avoid HTTP workers being clogged with processes that take longer than a usual web request. The browser periodically polls the server to see if the task is already finished using a UUID-shaped task ID. Once the task is completed, pretix resumes to the next step of the operation based on the result of the task. The system does however not check if the result stems from the correct type of task. Therefore, an attacker can supply the UUID of a task of a different type and pretix will continue with the result from the wrong task. In most cases, this will just result in an error because the return types do not match up, but in some cases this can be abused to extract objects the attacker usually should not see. Specifically, a vector was discovered that allowed to abuse this for unauthorized access to other people's ticket purchases. The attacker can, however, not control which purchases they get access to.

CVSS 4.0 · 8.9 High EPSS n/a KEV · Not listed
Vendors
—
Products
—
CVE-2026-131785

WordPress PublishPress Permissions plugin <= 5.0.1 - Broken Access Control vulnerability

Missing Authorization vulnerability in PublishPress PublishPress Permissions press-permit-core allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects PublishPress Permissions: from n/a through 5.0.1.

CVSS 3.1 · 5.3 Medium EPSS n/a KEV · Not listed
Vendors
—
Products
—
CVE-2026-95690

Excessive Memory Allocation in DTLS Handshake Message Reassembly

Issue summary: Receiving crafted out-of-sequence DTLS handshake fragments may cause OpenSSL to allocate a full message-length reassembly buffer for each buffered message, so a small amount of wire data consumes a large amount of memory. Impact summary: A remote attacker can send a few small crafted DTLS handshake fragments to make a DTLS server or client allocate well over a megabyte of memory per connection, which may lead to memory exhaustion and Denial of Service if many connections are made. CWE: CWE-770: Allocation of Resources Without Limits or Throttling Description: DTLS handshake messages can arrive out of order and fragmented, so OpenSSL buffers fragments of up to ten out-of-sequence messages until reassembly is possible. When the first fragment of a new message arrives, OpenSSL allocates a buffer sized to the full message length declared in the fragment header, plus a reassembly bitmap, instead of storing only the bytes actually received. The declared length is capped by the maximum certificate list size, 128KB by default, and that cap applies to every handshake message type rather than only to Certificate messages. Only DTLS endpoints reach this code. TLS, QUIC and applications that do not use DTLS are unaffected. An attacker sends fragments that declare a large message length but carry almost no data, using up to ten distinct message sequence numbers. A single connection can then hold roughly 1.4MB of buffers from about 156 bytes on the wire. Because the number of buffered messages is capped, memory exhaustion requires many connections or many peers, which is why the severity is Low. FIPS impact: no The affected code is outside the FIPS module boundary.

CVSS 3.1 · 5.3 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-84786

Possible NULL Dereference in Non-SMTP DANE Clients

Issue summary: A DANE-enabled TLS client may crash by dereferencing a NULL pointer when processing an unusual combination of certificate and TLSA records. Impact summary: The impact is limited to a client crash (potential Denial of Service). CWE: CWE-476: NULL Pointer Dereference Description: A DANE-enabled TLS client that supports TLSA records with at least one of the PKIX-TA(0) or PKIX-EE(1) usages alongside the DANE-TA(2) usage may crash by dereferencing a NULL pointer if the server claims a trusted CA's certificate to be its end-entity certificate and has an unusual mix of associated TLSA records. DANE SMTP clients should not be affected since only the DANE-TA(2) and DANE-EE(3) TLSA record usages are specified applicable in SMTP. For example, the Postfix MTA is not affected, while the Exim MTA does not at present use OpenSSL's DANE implementation. Use of DANE in validation of RFC7250 raw public keys (RPKs) is also unaffected, as these only use DANE-EE(3) TLSA records. Only applications that support combining the DANE PKI with a traditional PKI are potentially affected. A DANE-enabled browser or similar, that uses OpenSSL's DANE API could be affected. FIPS impact: no The DANE API is outside the FIPS module boundary.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-96295

Apache Texera: Authenticated users can always see and modify other's workflow execution results

Authenticated users can bypass normal controls on the reading and writing of workflow execution results. This allows any authenticated user to read or modify any other user's workflow execution results. This issue affects Apache Texera (incubating): from 1.1.0-incubating before 1.3.0-incubating. Users are recommended to upgrade to version 1.3.0-incubating, which fixes the issue.

CVSS n/a EPSS n/a KEV · Not listed
Vendors
—
Products
—
CVE-2026-131787

WordPress Gutenberg Blocks by Kadence Blocks plugin <= 3.9.1.1 - Cross Site Scripting (XSS) vulnerability

Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Liquid Web / StellarWP Gutenberg Blocks by Kadence Blocks kadence-blocks allows Stored XSS.This issue affects Gutenberg Blocks by Kadence Blocks: from n/a through 3.9.1.1.

CVSS 3.1 · 6.5 Medium EPSS n/a KEV · Not listed
Vendors
—
Products
—
CVE-2026-107494

Unbounded QUIC RETIRE_CONNECTION_ID Frame Sending Queue

Issue summary: The QUIC stack queues a RETIRE_CONNECTION_ID frame also for retransmitted NEW_CONNECTION_ID frames. This allows a remote malicious QUIC stack to queue an unlimited number of RETIRE_CONNECTION_ID frames. Impact summary: A malicious remote QUIC peer can trigger an out-of-memory condition causing a Denial of Service. CWE: CWE-770: Allocation of Resources Without Limits or Throttling Description: The earlier fix for CVE-2026-84784 was not complete. It failed to ignore retransmissions of the NEW_CONNECTION_ID frame. The QUIC implementation created and inserted a RETIRE_CONNECTION_ID frame for every retransmitted NEW_CONNECTION_ID frame it received and there was no limit on how many RETIRE_CONNECTION_ID frames were queued. This allows a malicious remote QUIC stack to trigger an out-of-memory (OOM) condition. FIPS impact: no The FIPS module is not affected as the QUIC implementation is outside the OpenSSL FIPS module boundary.

CVSS 3.1 · 9.1 Critical EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-131732

WordPress Taxi Booking Manager for WooCommerce plugin <= 2.2.10 - Broken Access Control vulnerability

Missing Authorization vulnerability in Magepeople inc. Taxi Booking Manager for WooCommerce ecab-taxi-booking-manager allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Taxi Booking Manager for WooCommerce: from n/a through 2.2.10.

CVSS 3.1 · 4.3 Medium EPSS n/a KEV · Not listed
Vendors
—
Products
—
CVE-2026-131781

WordPress Spectra plugin <= 2.20.6 - Cross Site Scripting (XSS) vulnerability

Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Brainstorm Force Spectra ultimate-addons-for-gutenberg allows Stored XSS.This issue affects Spectra: from n/a through 2.20.6.

CVSS 3.1 · 6.5 Medium EPSS n/a KEV · Not listed
Vendors
—
Products
—
CVE-2026-131789

WordPress myCred plugin <= 4.0.3 - Broken Access Control vulnerability

Missing Authorization vulnerability in myCred myCred mycred allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects myCred: from n/a through 4.0.3.

CVSS 3.1 · 5.3 Medium EPSS n/a KEV · Not listed
Vendors
—
Products
—
CVE-2026-132802

Improper Link Resolution Exploit Enables Root Privilege Escalation on UniFi Access Application

A malicious actor with access to the network and low privileges could exploit an Improper Link Resolution Before File Access vulnerability found in UniFi Access Application to execute arbitrary code with root privileges on the host device.

CVSS 3.1 · 9.9 Critical EPSS < 1% KEV · Not listed
Vendors
Ui
CVE-2026-132803

SQL Injection Privilege Escalation in Ubiquiti UniFi Access Application

A malicious actor with access to the network and low privileges could exploit a series of authenticated SQL Injection vulnerabilities found in UniFi Access Application to escalate privileges on the host device.

CVSS 3.1 · 9.9 Critical EPSS < 1% KEV · Not listed
Vendors
Ui
CVE-2026-132804

Server‑Side Request Forgery in Ubiquiti UniFi Access Application Allows Privilege Escalation

A malicious actor with access to the network and low privileges could exploit a Server-Side Request Forgery (SSRF) vulnerability found in UniFi Access Application to escalate privileges within UniFi OS.

CVSS 3.1 · 9.9 Critical EPSS < 1% KEV · Not listed
Vendors
Ui