Export limit exceeded: 26192 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.

Search vulnerabilities

Results 26,192

Export CSV
CVE-2026-64516

drm/amdgpu/vce1: Fix VCE 1 firmware size and offsets

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/vce1: Fix VCE 1 firmware size and offsets The VCPU BO contains the actual FW at an offset, but it was not calculated into the VCPU BO size. Subtract this from the FW size to make sure there is no out of bounds access. Make sure the stack and data offsets are aligned to the 32K TLB size. Check that the FW microcode actually fits in the space that is reserved for it. (cherry picked from commit c16fe59f622a080fc457a57b3e8f14c780699449)

CVSS 3.1 · 8.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-98072

net/rds: use wq_has_sleeper() in release_in_xmit()

In the Linux kernel, the following vulnerability has been resolved: net/rds: use wq_has_sleeper() in release_in_xmit() release_in_xmit() clears RDS_IN_XMIT with clear_bit_unlock() and then checks waitqueue_active() to decide whether anyone needs waking. clear_bit_unlock() is only a release operation: it orders the critical section before the bit clear, but does not order the subsequent plain load of the wait queue head after it. The waiter side does the mirror image - it adds itself to the wait queue and then tests the bit. That is the classic store-buffering pattern: the releasing CPU can read the wait queue as empty while the waiting CPU still reads the bit as set, so the sleeper is never woken. The waiters are rds_conn_shutdown() and rds_tcp_reset_callbacks(), both in uninterruptible wait_event() with no timeout. A lost wake-up strands the shutdown worker on its single-threaded workqueue until some other sender releases the bit again - and on a connection that is being torn down precisely because it failed, there may never be another sender. The barrier used to be there: release_in_xmit() did clear_bit() followed by smp_mb__after_atomic() until commit 1422f28826d2 ("rds: introduce acquire/release ordering in acquire/release_in_xmit()") folded both into clear_bit_unlock(), which strengthened the lock hand-off but silently dropped the full barrier the wake-up check depends on. The refill counterpart, release_refill() in net/rds/ib_recv.c, still carries its smp_mb__after_atomic() for exactly this reason. Use wq_has_sleeper(), which is waitqueue_active() preceded by the required full barrier.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-64538

ipv6: Fix null-ptr-deref in fib6_nh_mtu_change().

In the Linux kernel, the following vulnerability has been resolved: ipv6: Fix null-ptr-deref in fib6_nh_mtu_change(). fib6_nh_mtu_change() re-fetches idev via __in6_dev_get(arg->dev) and dereferences idev->cnf.mtu6 without a NULL check. addrconf_ifdown() clears dev->ip6_ptr with RCU_INIT_POINTER() after rt6_disable_ip() has released tb6_lock, so the RA-driven MTU walk can observe a NULL idev and oops. The caller rt6_mtu_change_route() guards its own __in6_dev_get(), but this re-fetch is unguarded; nexthop-backed routes survive addrconf_ifdown()'s flush, so the walk still reaches it after ip6_ptr is nulled. Return 0 when idev is NULL, matching rt6_mtu_change_route() and the fib6_mtu() fix in commit 5ad509c1fdad ("ipv6: Fix null-ptr-deref in fib6_mtu()."). Oops: general protection fault, ... KASAN: null-ptr-deref in range [0x00000000000002a8-0x00000000000002af] RIP: 0010:fib6_nh_mtu_change+0x203/0x990 rt6_mtu_change_route+0x141/0x1d0 __fib6_clean_all+0xd0/0x160 rt6_mtu_change+0xb4/0x100 ndisc_router_discovery+0x24b5/0x2cb0 icmpv6_rcv+0x12e9/0x1710 ipv6_rcv+0x39b/0x410

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
CVE-2026-98060

bpf: Reject resilient lock operations in rbtree callbacks

In the Linux kernel, the following vulnerability has been resolved: bpf: Reject resilient lock operations in rbtree callbacks __bpf_rbtree_add() keeps parent and link pointers live across calls to the program-supplied comparison callback. The verifier therefore requires the root's lock to remain held throughout the callback. The helper path enforces this rule for bpf_spin_lock() and bpf_spin_unlock(), but the resilient lock kfunc argument path does not. Since resilient locks may protect BPF rbtree roots, a callback can release the root lock and let another CPU remove and free the node referenced by the in-progress tree walk. The walk then resumes using freed pointers. Reject resilient lock kfuncs in an rbtree comparison callback, matching the existing policy for the spin lock helpers. Resilient-lock-protected trees remain valid when their comparison callbacks leave lock state alone.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-98061

bpf: Reject tail calls directly from callback frames

In the Linux kernel, the following vulnerability has been resolved: bpf: Reject tail calls directly from callback frames A tail call from a non-zero frame is modeled as a return from that frame. The verifier makes R0 unknown and calls prepare_func_exit() for the taken branch. When the current frame is a synchronous callback, prepare_func_exit() enforces the callback return-value contract and marks R0 precise. Since the tail-call path synthesized R0 rather than deriving it from an instruction, precision backtracking reaches the callback-calling instruction with R0 still requested and triggers the "callback unexpected regs" verifier bug. A CAP_BPF task can therefore cause a WARN and an -EFAULT BPF_PROG_LOAD. Tail calls reachable from callbacks are already rejected later by check_max_stack_depth(). Reject a tail call made directly by a callback before constructing the inconsistent return state, using the existing diagnostic. Tail calls from ordinary subprograms keep their current behavior.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-98063

bpf: Fix NULL-ptr-deref in btf_var_show()

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix NULL-ptr-deref in btf_var_show() btf_var_show() calls btf_type_id_resolve() unconditionally, which dereferences btf->resolved_ids. That is NULL for a base BTF - e.g. the vmlinux BTF that bpf_snprintf_btf() renders against - since base BTF is not resolved during parsing. btf_modifier_show() guards this with 'if (btf->resolved_ids)', but btf_var_show() does not. A BPF program that passes the type_id of a BTF_KIND_VAR from the vmlinux BTF to bpf_snprintf_btf() thus NULL-derefs: KASAN: probably user-memory-access in range [0x46638-0x4663f] RIP: 0010:btf_var_show (kernel/bpf/btf.c:2929) Call Trace: <TASK> btf_type_show (kernel/bpf/btf.c:8259) btf_type_snprintf_show (kernel/bpf/btf.c:8329) bpf_snprintf_btf (kernel/trace/bpf_trace.c:1047) bpf_prog_test_run_raw_tp (net/bpf/test_run.c:829) __sys_bpf (kernel/bpf/syscall.c:4804) do_syscall_64 (arch/x86/entry/syscall_64.c:84) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) </TASK> Resolve the var's type directly with btf_type_skip_modifiers() when resolved_ids is NULL, mirroring btf_modifier_show().

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-98064

bpf: Fix NULL-ptr-deref when showing a void BTF type

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix NULL-ptr-deref when showing a void BTF type btf_modifier_show() resolves the modifier and then calls btf_type_ops(t)->show() unconditionally. For the void type (type_id 0, BTF_KIND_UNKN) kind_ops[] has no entry, so ->show is NULL. A "const void" (a modifier resolving to void) cannot be a map key or value - map_check_btf() rejects it because void has no size - so the map dump path does not reach it. But bpf_snprintf_btf() takes a type_id straight from the BPF program, and passing such a "const void" from the vmlinux BTF NULL-derefs: KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f] RIP: 0010:btf_modifier_show (kernel/bpf/btf.c:2914) Call Trace: <TASK> btf_type_show (kernel/bpf/btf.c:8251) btf_type_snprintf_show (kernel/bpf/btf.c:8321) bpf_snprintf_btf (kernel/trace/bpf_trace.c:1047) bpf_prog_test_run_raw_tp (net/bpf/test_run.c:829) __sys_bpf (kernel/bpf/syscall.c:4804) do_syscall_64 (arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) </TASK> Fall back to btf_df_show() when the resolved type has no show op; it emits the "<unsupported kind:N>" placeholder already used for kinds like FWD and FUNC. bpf_snprintf_btf() then returns the length as usual.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-98065

bpf: Reject key-less BTF for hash maps

In the Linux kernel, the following vulnerability has been resolved: bpf: Reject key-less BTF for hash maps map_check_btf() allows a key-less BTF (btf_key_type_id == 0) only for maps that have a ->map_check_btf callback, and leaves the actual decision to that callback. Hash maps used to have no ->map_check_btf, so a key-less BTF was rejected outright. That changed when htab and rhtab gained a ->map_check_btf to register a dtor - htab in commit 1df97a7453ee ("bpf: Register dtor for freeing special fields") and rhtab in commit 6905f8601298 ("bpf: Allow special fields in resizable hashtab"). Neither looks at the key, so a key-less hash map now passes map_check_btf() and gets created. Reading it back through bpffs feeds the key type_id 0 into btf_type_seq_show(); btf_type_by_id() returns the void type, kind_ops[BTF_KIND_UNKN] is NULL, and btf_type_show() dereferences it: RIP: 0010:btf_type_show+0x223/0x2e0 kernel/bpf/btf.c:8232 RSP: 0018:ffffc9000399f868 EFLAGS: 00010206 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000005 RSI: 0000000000000000 RDI: 0000000000000028 RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000 R10: ffffc9000399f970 R11: 0000000000000001 R12: ffffffff9b96b140 R13: ffffc9000399f8e0 R14: ffff88803d393c00 R15: 0000000000000003 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000200000000000 CR3: 000000003d213000 CR4: 0000000000352ef0 DR0: 0000000039ae8f55 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Call Trace: <TASK> btf_type_seq_show_flags+0xca/0x120 kernel/bpf/btf.c:8250 htab_map_seq_show_elem+0x12e/0x350 kernel/bpf/hashtab.c:1669 map_seq_show+0x13d/0x1e0 kernel/bpf/inode.c:293 traverse.part.0.constprop.0+0x107/0x650 fs/seq_file.c:112 traverse fs/seq_file.c:99 [inline] seq_read_iter+0x93f/0x1270 fs/seq_file.c:196 seq_read+0x344/0x4d0 fs/seq_file.c:163 vfs_read+0x1e4/0xb40 fs/read_write.c:572 ksys_pread64 fs/read_write.c:764 [inline] __do_sys_pread64 fs/read_write.c:772 [inline] __se_sys_pread64 fs/read_write.c:769 [inline] __x64_sys_pread64+0x1eb/0x250 fs/read_write.c:769 do_syscall_x64 arch/x86/entry/syscall_64.c:61 [inline] do_syscall_64+0x123/0x790 arch/x86/entry/syscall_64.c:84 entry_SYSCALL_64_after_hwframe+0x77/0x7f Reject a key-less BTF in htab_map_check_btf() and rhtab_map_check_btf(), restoring the previous behavior.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-98066

ALSA: caiaq: Fix potential double-free at error path

In the Linux kernel, the following vulnerability has been resolved: ALSA: caiaq: Fix potential double-free at error path The fix for caiaq driver's resource management to handle the errors tries to release the resources in a common destructor call, but as a sashiko review for another patch suggested, some of the audio resources such as URBs have been already freed, and this may lead to a double-free. For addressing the double-free, call the common destructor function from each place, and assure that the resource pointers get cleared.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-98073

net: Remove conflicting altnames for dying netns in __dev_change_net_namespace().

In the Linux kernel, the following vulnerability has been resolved: net: Remove conflicting altnames for dying netns in __dev_change_net_namespace(). syzbot reported the warning in cfg80211_pernet_exit(). [0] The repro does the following: 1. create two device in root netns and non-root netns 2. assign the same altname for the two devices 3. remove the non-root netns Since commit 7663d522099e ("net: check for altname conflicts when changing netdev's netns"), cfg80211_switch_netns() and cfg802154_switch_netns() fail if init_net has a device with the conflicting altname. default_device_exit_net() had the same issue and commit d09486a04f5d ("net: fix removing a namespace with conflicting altnames") fixed it. cfg80211_pernet_exit() and cfg802154_pernet_exit() need the same fix. Let's generalise the fix by removing conflicting altnames for dying netns in __dev_change_net_namespace(). [0]: cfg80211_switch_netns(rdev, &init_net) WARNING: net/wireless/core.c:1871 at cfg80211_pernet_exit+0xd5/0x120 net/wireless/core.c:1871, CPU#1: kworker/u8:9/1160 Modules linked in: CPU: 1 UID: 0 PID: 1160 Comm: kworker/u8:9 Not tainted syzkaller #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/24/2026 Workqueue: netns cleanup_net RIP: 0010:cfg80211_pernet_exit+0xd5/0x120 net/wireless/core.c:1871 Code: e8 03 42 80 3c 20 00 74 08 4c 89 f7 e8 b4 ef 0e f7 4d 8b 36 49 81 fe 20 10 4a 90 74 12 e8 03 3d 9f f6 eb 85 e8 fc 3c 9f f6 90 <0f> 0b 90 eb cc e8 f1 3c 9f f6 eb 05 e8 ea 3c 9f f6 5b 41 5c 41 5e RSP: 0018:ffffc900057a78f0 EFLAGS: 00010293 RAX: ffffffff8b287154 RBX: ffff88807ba72780 RCX: ffff8880213e8000 RDX: 0000000000000000 RSI: 00000000ffffffef RDI: 0000000000000000 RBP: 00000000ffffffef R08: ffffffff9024cc67 R09: 0000000000000000 R10: fffff52000af4eb0 R11: fffffbfff204998d R12: dffffc0000000000 R13: ffffffff904a1080 R14: ffff888144ed0008 R15: ffff888144ed0e20 FS: 0000000000000000(0000) GS:ffff888124de6000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005642de0a8a70 CR3: 000000007a40c000 CR4: 00000000003526f0 Call Trace: <TASK> ops_exit_list net/core/net_namespace.c:200 [inline] ops_undo_list+0x43d/0x8d0 net/core/net_namespace.c:253 cleanup_net+0x572/0x810 net/core/net_namespace.c:706 process_one_work kernel/workqueue.c:3387 [inline] process_scheduled_works+0xc3d/0x1630 kernel/workqueue.c:3470 worker_thread+0xa47/0xfb0 kernel/workqueue.c:3551 kthread+0x38b/0x480 kernel/kthread.c:436 ret_from_fork+0x514/0xb70 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 </TASK>

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-98074

bonding: do not clear curr_active_slave prematurely when releasing all slaves

In the Linux kernel, the following vulnerability has been resolved: bonding: do not clear curr_active_slave prematurely when releasing all slaves When releasing all slaves during bond destruction (all == true), __bond_release_one() unconditionally clears bond->curr_active_slave to NULL in every iteration. If a backup slave is released before the active slave, bond_alb_deinit_slave() triggers rlb_teach_disabled_mac_on_primary(), which increments the active slave dev promiscuity counter and sets bond_info->primary_is_promisc = 1. Because bond->curr_active_slave was prematurely cleared to NULL when releasing the backup slave, the subsequent iteration releasing the active slave evaluates oldcurrent as NULL, so bond_change_active_slave(bond, NULL) is skipped. Consequently, bond_alb_handle_active_change() is never called to decrement the promiscuity counter, permanently leaking promiscuous mode on the physical device after bond teardown. When oldcurrent == slave, bond_change_active_slave(bond, NULL) already sets bond->curr_active_slave to NULL. We only need to avoid selecting a new active slave when all == true. Replace the if (all) branch with if (!all && oldcurrent == slave).

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-98075

bpf: reject BPF_PSEUDO_FUNC reference to the main program

In the Linux kernel, the following vulnerability has been resolved: bpf: reject BPF_PSEUDO_FUNC reference to the main program fixups.c:jit_subprogs() rewrites BPF_PSEUDO_FUNC loads to contain real function addresses. This function is invoked from bpf_jit_subprogs() only when env->subprog_cnt > 1. Meaning that for any program like below: int main(void *ctx) { void *ptr = main; ... bpf_timer_set_callback(..., ptr); ... } The 'ptr' won't be ever converted to contain an address. In combination with e.g. bpf_timer_set_callback() this would lead to a function call at a bogus address. Instead of complicating the implementation, just assume that no useful program needs main to be a sync or async callback and reject BPF_PSEUDO_FUNC loads for the main subprogram.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-98076

tracing/probes: Fix use-after-free on field name/type of events with multiple probes

In the Linux kernel, the following vulnerability has been resolved: tracing/probes: Fix use-after-free on field name/type of events with multiple probes The fields of a probe-based dynamic event (kprobe, uprobe, eprobe and fprobe events) are created in traceprobe_define_arg_fields() by handing the probe_arg name/type strings to trace_define_field(), which only stores the pointers without copying. Those strings are owned by the trace_probe and are freed when that probe is removed. An event can have several probes attached. The field list is defined only once, by the first probe that registers the event, but it is kept alive by any surviving sibling probe. Deleting just that first probe by symbol - # primary A: fields are defined from A's args echo 'p:kprobes/ev vfs_read a1=$arg1' > kprobe_events # append B: shares A's event call echo 'p:kprobes/ev vfs_write a1=$arg1' >> kprobe_events # delete only A (matched by symbol), B survives echo '-:kprobes/ev vfs_read' >> kprobe_events frees A's args (trace_probe_cleanup() -> traceprobe_free_probe_arg()), but trace_probe_unlink() keeps the trace_probe_event because the probe list is not empty. The event call stays registered via B while its fields now reference freed memory. Any field lookup then reads it, e.g. echo 'a1 == 1' > events/kprobes/ev/filter BUG: KASAN: slab-use-after-free in strcmp+0xa7/0xb0 Call Trace: strcmp trace_find_event_field parse_pred process_preds create_filter apply_event_filter event_filter_write field->name references parg->name (kstrdup'd, freed with the probe) and, for array arguments, field->type references parg->fmt (kmalloc'd, freed with the probe) - the scalar type otherwise points at the static fmttype rodata, which is safe. Have traceprobe_define_arg_fields() duplicate the name and type strings and anchor the copies on the trace_probe_event, which embeds the event call and outlives every individual probe; trace_probe_event_free() releases them. The reproducer above triggers reliably; the field lookup and the delete both run under event_mutex, so this is a dangling reference after removal rather than a race. The issue was found by the autokbug dynamic kernel fuzzer at Tencent Yunding Lab.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-64544

crypto: asymmetric_keys - fix OOB read in pefile_digest_pe_contents

In the Linux kernel, the following vulnerability has been resolved: crypto: asymmetric_keys - fix OOB read in pefile_digest_pe_contents pefile_digest_pe_contents() computes the trailing-data hash length as pelen - (hashed_bytes + certs_size). A crafted PE can make the addition exceed pelen, causing the unsigned subtraction to underflow to ~4 GiB. This is passed to crypto_shash_update() which reads out of bounds and panics on unmapped vmalloc guard pages. BUG: unable to handle page fault for address: ffffc900038d8000 Oops: Oops: 0000 [#1] SMP KASAN NOPTI RIP: 0010:sha256_blocks_generic (lib/crypto/sha256.c:152) Call Trace: <TASK> __sha256_update (lib/crypto/sha256.c:208) crypto_sha256_update (crypto/sha256.c:142) verify_pefile_signature (crypto/asymmetric_keys/verify_pefile.c:436) kexec_kernel_verify_pe_sig (kernel/kexec_file.c:151) __do_sys_kexec_file_load (kernel/kexec_file.c:406) do_syscall_64 (arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) </TASK> Kernel panic - not syncing: Fatal exception Validate that the addition does not overflow and the result does not exceed pelen before the subtraction. Return -ELIBBAD on failure.

CVSS 3.1 · 7.1 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-64553

net: psample: fix info leak in PSAMPLE_ATTR_DATA

In the Linux kernel, the following vulnerability has been resolved: net: psample: fix info leak in PSAMPLE_ATTR_DATA psample open codes nla_put() presumably to avoid wiping the data with 0s just to override it with packet data. This open coding is missing clearing the pad, however, each netlink attr is padded to 4B and data_len may not be divisible by 4B.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-98077

netfilter: nf_conntrack_sip: fix OOB read in sip_skip_whitespace()

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack_sip: fix OOB read in sip_skip_whitespace() sip_skip_whitespace() returns dptr unchanged when its own loop exhausts the buffer (dptr == limit), instead of NULL like its sibling sip_follow_continuation() returns on its own "no more data" path. ct_sip_get_header() only checks for NULL after calling it: dptr = sip_skip_whitespace(dptr, limit); if (dptr == NULL) break; if (*dptr != ':' || ++dptr >= limit) break; so a recognized header name followed only by spaces/tabs running to the exact end of the SIP payload, with no colon, makes the very next statement read one byte past the buffer. Make both "no more data" outcomes return NULL, matching the convention sip_follow_continuation() already uses and that both existing callers already check for.

CVSS 3.1 · 7.1 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-98079

btrfs: zstd: fix lost wakeup when waiting for a workspace

In the Linux kernel, the following vulnerability has been resolved: btrfs: zstd: fix lost wakeup when waiting for a workspace A writer can sleep forever in zstd_get_workspace() even though a workspace is free. When zstd_alloc_workspace() fails, the task is queued on zwsm->wait and schedules unconditionally, never re-testing the pool. zstd_put_workspace() publishes the workspace and then calls cond_wake_up(), which only wakes when a sleeper is already visible, so a workspace returned between the failed allocation and prepare_to_wait() wakes nobody. The window is wide: zstd_alloc_workspace() goes through kvmalloc() and may enter reclaim. Only a max level workspace triggers the wakeup and one is deliberately kept allocated as the fallback every waiter waits for, so once its wakeup is lost the writer stays in TASK_UNINTERRUPTIBLE until some other task happens to return one. Re-check the pool after prepare_to_wait() has published the waiter, and use the workspace if one turned up.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-98081

btrfs: zoned: finish active block group cleanup if call_zone_finish() fails

In the Linux kernel, the following vulnerability has been resolved: btrfs: zoned: finish active block group cleanup if call_zone_finish() fails do_zone_finish() clears BLOCK_GROUP_FLAG_ZONE_IS_ACTIVE before finishing the zones. If call_zone_finish() then fails it returned early, leaving the now inactive block group on fs_info->zone_active_bgs, leaking its reference, the BTRFS_FS_NEED_ZONE_FINISH waiters are never woken, and as its alloc_offset equals the zone capacity btrfs_zone_finish_one_bg() keeps selecting it, spinning btrfs_zoned_activate_one_bg(). Fall through to the cleanup on failure too and return the error, but keep the block group read-only as its zones are left inconsistent.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-98084

bpf: backtracking shouldn't clear outer frame R1-R5 for callbacks

In the Linux kernel, the following vulnerability has been resolved: bpf: backtracking shouldn't clear outer frame R1-R5 for callbacks When processing calls to bpf_loop() verifier marks R1 (and R4) as precise. R1 tracks loop iterations number and because of the 'callback_depth < R1' mechanics in check_helper_call() must be marked precise. However, precision propagation for R1 was broken, when bpf_loop() call was verified on a second iteration. Consider the following verification trace: - main: bpf_loop(nr_loops, callback ...) - callback: BPF_EXIT - main: bpf_loop(nr_loops, callback ...) - ... While the first visit of the call to bpf_loop() propagated R1 precision as expected, the second call to mark_chain_precision() in the check_helper_call() set R1, but it was immediately reset when backtrack_insn() processed preceding BPF_EXIT in the loop deleted in this patch. Because of that, the second visit of the call to bpf_loop() injected checkpoint with R1 not marked as precise. Which could trick the verifier into accepting unsafe programs. See the next patch for an example of such program. Commit is structured in a way to minimize conflicts when 'bpf' would be eventually merged with 'bpf-next'.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-98085

bpf: backtrack_insn(): Handle ld_{abs,ind} subprog exit edge

In the Linux kernel, the following vulnerability has been resolved: bpf: backtrack_insn(): Handle ld_{abs,ind} subprog exit edge Nicholas Carlini reported a bug in precision backtracking mechanism for BPF_LD | BPF_{IND,ABS} instructions. These instructions are modelled as two branches: - fallthrough; - implicit exit from current subprogram. The implicit exit case was not handled by the backtrack_insn() function. When backtracking such a path backtrack_insn() did not call bt_subprog_enter(), which meant that backtracking continued manipulating precision marks in a caller frame, while looking at instructions in a callee frame. This lead to segmentation faults during verification (see the selftest), or unsound state pruning.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products