Export limit exceeded: 430254 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.

Search vulnerabilities

Results 430,254

Export CSV
CVE-2026-114204

Use of Hard-coded Cryptographic Key in ASUS Control Center Express allows a remote user to bypass authentication by forging a session token for an account with a recent valid login, resulting in administrative control of the management console and of the clients it manages. Refer to the ' Security Update for ASUS Control Center Express Agent  ' section on the ASUS Security Advisory for more information.

CVSS 4.0 · 9 Critical EPSS < 1% KEV · Not listed
Vendors
CVE-2026-114202

Use of Hard-coded Cryptographic Key in ASUS Control Center Express allows a remote user to gain administrative privileges via a forged authentication token. Refer to the ' Security Update for ASUS Control Center Express Agent  ' section on the ASUS Security Advisory for more information.

CVSS 4.0 · 10 Critical EPSS < 1% KEV · Not listed
Vendors
CVE-2026-107517

Stored XSS in Dell PowerStore Web Interface Allows Low-Privileged Authenticated Users to Execute Scripts as Higher Privileges

Dell PowerStore contains a stored cross-site scripting (XSS) vulnerability. A low-privileged authenticated attacker could exploit this vulnerability, potentially leading to execution of malicious script in a higher-privileged user's session.

CVSS 3.1 · 5.4 Medium EPSS < 1% KEV · Not listed
Vendors
CVE-2026-99804

io_uring/io-wq: save worker type before dropping its reference

In the Linux kernel, the following vulnerability has been resolved: io_uring/io-wq: save worker type before dropping its reference io_wq_cancel_tw_create() inspects cb->func after calling io_worker_cancel_cb(). For an existing worker, that call can drop the last worker reference and wake io_worker_exit(). If the canceling task is preempted, the worker can be unlinked and freed by kfree_rcu() before the callback function is inspected. KASAN reports a slab-use-after-free read in this path. Save whether the callback belongs to an unpublished continuation worker while its reference is still held, then use the saved result for the conditional free. This preserves the existing accounting and frees only the worker allocated for the canceled continuation.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-129007

WordPress Knit Pay plugin <= 9.6.4.0 - Cross Site Scripting (XSS) vulnerability

Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Knit Pay Knit Pay knit-pay allows Stored XSS.This issue affects Knit Pay: from n/a through 9.6.4.0.

CVSS 3.1 · 7.1 High EPSS n/a KEV · Not listed
Products
CVE-2026-19399

Improper Authentication and Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') in ASUS Router firmware allow an unauthenticated nearby user to perform file operations or read files in an unintended directory via crafted HTTP requests during an active user session. Refer to the ' Security Update for ASUS Router Firmware ' section on the ASUS Security Advisory for more information.

CVSS 4.0 · 6.1 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-114205

Incorrect authorization in ASUS Control Center Express allows a remote authenticated user with a low-privileged role to create an administrator account, resulting in administrative control of the management console and of the clients it manages. Refer to the ' Security Update for ASUS Control Center Express Agent  ' section on the ASUS Security Advisory for more information.

CVSS 4.0 · 9.4 Critical EPSS < 1% KEV · Not listed
Vendors
CVE-2026-84786

Possible NULL Dereference in Non-SMTP DANE Clients

Issue summary: A DANE-enabled TLS client may crash by dereferencing a NULL pointer when processing an unusual combination of certificate and TLSA records. Impact summary: The impact is limited to a client crash (potential Denial of Service). CWE: CWE-476: NULL Pointer Dereference Description: A DANE-enabled TLS client that supports TLSA records with at least one of the PKIX-TA(0) or PKIX-EE(1) usages alongside the DANE-TA(2) usage may crash by dereferencing a NULL pointer if the server claims a trusted CA's certificate to be its end-entity certificate and has an unusual mix of associated TLSA records. DANE SMTP clients should not be affected since only the DANE-TA(2) and DANE-EE(3) TLSA record usages are specified applicable in SMTP. For example, the Postfix MTA is not affected, while the Exim MTA does not at present use OpenSSL's DANE implementation. Use of DANE in validation of RFC7250 raw public keys (RPKs) is also unaffected, as these only use DANE-EE(3) TLSA records. Only applications that support combining the DANE PKI with a traditional PKI are potentially affected. A DANE-enabled browser or similar, that uses OpenSSL's DANE API could be affected. FIPS impact: no The DANE API is outside the FIPS module boundary.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-95690

Excessive Memory Allocation in DTLS Handshake Message Reassembly

Issue summary: Receiving crafted out-of-sequence DTLS handshake fragments may cause OpenSSL to allocate a full message-length reassembly buffer for each buffered message, so a small amount of wire data consumes a large amount of memory. Impact summary: A remote attacker can send a few small crafted DTLS handshake fragments to make a DTLS server or client allocate well over a megabyte of memory per connection, which may lead to memory exhaustion and Denial of Service if many connections are made. CWE: CWE-770: Allocation of Resources Without Limits or Throttling Description: DTLS handshake messages can arrive out of order and fragmented, so OpenSSL buffers fragments of up to ten out-of-sequence messages until reassembly is possible. When the first fragment of a new message arrives, OpenSSL allocates a buffer sized to the full message length declared in the fragment header, plus a reassembly bitmap, instead of storing only the bytes actually received. The declared length is capped by the maximum certificate list size, 128KB by default, and that cap applies to every handshake message type rather than only to Certificate messages. Only DTLS endpoints reach this code. TLS, QUIC and applications that do not use DTLS are unaffected. An attacker sends fragments that declare a large message length but carry almost no data, using up to ten distinct message sequence numbers. A single connection can then hold roughly 1.4MB of buffers from about 156 bytes on the wire. Because the number of buffered messages is capped, memory exhaustion requires many connections or many peers, which is why the severity is Low. FIPS impact: no The affected code is outside the FIPS module boundary.

CVSS 3.1 · 5.3 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99571

nvme-tcp: Validate the queue state under the queue lock in the address attribute

In the Linux kernel, the following vulnerability has been resolved: nvme-tcp: Validate the queue state under the queue lock in the address attribute Reading the "address" sysfs attribute calls kernel_getsockname() on the admin queue socket, which can race with the queue teardown during connection error recovery: a reader can observe NVME_TCP_Q_LIVE set, then block on the queue lock while nvme_tcp_free_queue() releases the socket and clears queue->sock without holding the lock. Once the reader acquires the lock it dereferences the NULL socket pointer. Commit 76d54bf20cdc ("nvme-tcp: don't access released socket during error recovery") had the queue liveness check inside the lock. Commit 782373ba2766 ("nvme: tcp: avoid race between queue_lock lock and destroy") moved it back out because the lock itself is destroyed in nvme_tcp_free_queue(), so a reader arriving late trips mutex_destroy(). Check the queue liveness inside the queue lock, and clear queue->sock under the same lock. The teardown clears NVME_TCP_Q_LIVE under the lock well before the socket is released, so a reader either sees the bit cleared or a socket that cannot be released while it holds the lock. To also close the lock lifetime race, the queue locks are now owned by the controller: they are initialized with the queue array and only destroyed when the controller is freed, which cannot happen while a sysfs attribute read is still in progress. The queue count is computed by the NVME_TCP_OPT_NR_QUEUES() macro from the original connect options for both initialization and destruction, as reconnects may shrink ctrl->queue_count.

CVSS 3.1 · 4.7 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99664

mm/gup: recheck the PUD under PTL in follow_pud_mask()

In the Linux kernel, the following vulnerability has been resolved: mm/gup: recheck the PUD under PTL in follow_pud_mask() follow_pud_mask() reads the PUD without a lock. If it is a leaf, it takes the lock and calls follow_huge_pud(), which reads the entry again, but only tests whether it is present. A leaf can be zapped concurrently and a page fault can fill the empty entry with a page table. This currently only applies when device-dax makes use of PUD entries, and the fault after e.g., MADV_DONTNEED would find THPs to be disabled. That requires a sequence like 1) Fault in the PUD 2) Disable THP 3) Have GUP race against concurrent MADV_DONTNEED + refault Which is rather unlikely to happen in practice, which is why we never received a report about such a problem. Before commit 1b1676180246 ("mm/gup: handle huge pud for follow_pud_mask()"), we performed that check in follow_devmap_pud() by testing for pud_devmap(). Let's fix it by just structuring follow_pud_mask() similar to follow_pmd_mask(), minus protnone stuff that does not apply and minus FOLL_SPLIT_PMD handling. That makes it much easier to spot any such inconsistencies. Perform the pud_bad() check early in follow_pmd_mask() and just forward the PUD value. We can drop the pud_present() check in follow_huge_pud(), just like we have in follow_huge_pmd(). Even though we are performing more changes than strictly necessary, the fix should be easy to backport.

CVSS 3.1 · 4.7 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99748

ksmbd: revert fsids on durable reconnect and replay failure

In the Linux kernel, the following vulnerability has been resolved: ksmbd: revert fsids on durable reconnect and replay failure On a durable handle reconnect or a request replay, smb2_open() switches to the SMB user's fsids before calling ksmbd_vfs_getattr(). If that call fails, the code jumps to err_out2 and skips ksmbd_revert_fsids() at err_out1. The user's credentials then stay installed on the shared ksmbd worker. Later work on that worker, including other users' requests, runs with the first user's fsuid, fsgid and supplementary groups. ksmbd_free_work_struct() also warns, because work->saved_cred is still set. Jump to err_out1 instead. No path is held at this point, so skipping the path_put() at err_out is correct.

CVSS 3.1 · 7.1 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-58320

Apache Iggy: Snapshot API missing authorization

Missing Authorization vulnerability in the Apache Iggy server. The system snapshot command (GetSnapshot on the binary transports and POST /snapshot on HTTP) checked only that the caller was logged in, not the read_servers or manage_servers permission. Any authenticated user, including a user with no permissions, could download a diagnostic archive with the server log files, the host process list, a file system listing and the runtime server configuration. The runtime configuration contains the HTTP JWT signing secret and the message encryption key when they are set in the configuration. If HTTP is enabled, the user could use the signing secret to create tokens for any account, including root. This issue affects Apache Iggy: before 0.9.0. Users are recommended to upgrade to version 0.10.0, which fixes the issue.

CVSS 3.1 · 6.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-110513

Apache Iggy: Deleted user's HTTP token authenticates as the account that reuses its user ID

Insufficient Session Expiration vulnerability in the Apache Iggy server HTTP transport. A self-issued JSON Web Token (JWT) identified the user only by numeric user ID, and a new user takes the lowest free ID. After an administrator deleted a user, that user's unexpired token, or a token refreshed from it while the ID was free, authenticated as the next account created with that ID and had that account's permissions. Only deployments with HTTP enabled are affected. This issue affects Apache Iggy: through 0.9.0. Users are recommended to upgrade to version 0.10.0, which fixes the issue.

CVSS 3.1 · 9.8 Critical EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-110486

Remote heap out-of-bounds read/write in Eclipse Mosquitto

In Eclipse Mosquitto versions 2.1 through 2.1.2, a listener configured with `protocol websockets` mishandles empty WebSocket data frames. `net__read_ws()` in `lib/net_ws.c` returns the number of framing bytes consumed (the 4 masking-key bytes) for a data frame with a zero-length payload, without writing any bytes to the caller’s buffer. The MQTT packet reader in `packet__read_single()` (`lib/packet_mosq.c`) trusts that return value as a payload byte count. A remote client can therefore advance the read position over an uninitialised heap allocation, causing the broker to process and forward uninitialised heap memory (information disclosure, including heap and libc pointers), and can underflow the unsigned `to_process` counter so that subsequent attacker-controlled frame data is written past the end of the allocation (heap out-of-bounds write). The out-of-bounds write is reachable from the CONNECT packet before any authentication check, so an unauthenticated client can corrupt the heap and crash the broker even when `allow_anonymous false` is set. Combining the disclosure and the write allows remote code execution as the broker’s user by any client able to establish a session.

CVSS 3.1 · 9.8 Critical EPSS 1.0% KEV · Not listed
Vendors
CVE-2026-99761

batman-adv: stop originator purge worker before freeing TT

In the Linux kernel, the following vulnerability has been resolved: batman-adv: stop originator purge worker before freeing TT batadv_mesh_free() releases the translation tables via batadv_tt_free() before batadv_originator_free() stops orig_work. The purge worker can therefore still run while the TT is torn down. When an originator times out, batadv_purge_orig_ref() calls batadv_tt_global_del_orig(), which loads tt.global_hash and walks all buckets while taking their locks: CPU0 CPU1 batadv_tt_free() batadv_purge_orig() batadv_tt_global_del_orig() hash = ...tt.global_hash; batadv_tt_global_table_free() batadv_hash_destroy(hash); spin_lock_bh(&hash->list_locks[i]); Disable orig_work at the beginning of batadv_mesh_free(), directly after the mesh was marked as deactivating. The second disable_delayed_work_sync() in batadv_originator_free() is harmless because it is free'd anyway.

CVSS 3.1 · 4.7 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99769

drm/vc4: Drop the BO reservations outside of job_lock

In the Linux kernel, the following vulnerability has been resolved: drm/vc4: Drop the BO reservations outside of job_lock vc4_queue_submit() calls drm_exec_fini() with job_lock held and interrupts disabled. Besides unlocking the reservations, drm_exec_fini() frees the object array with kvfree(), which asks for preemptible task context or a non-NMI interrupt, and may reach might_sleep() through vfree(). Considering that an array that exceeds a page can take the vmalloc fallback, call drm_exec_fini() once job_lock is dropped. The reservations are then held across the job kick, which is harmless as nothing in the completion path takes a BO reservation. Note that vc4_attach_fences() has to stay inside the critical section, as it walks exec, which the job done worker is free to release as soon as job_lock is dropped.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products