Export limit exceeded: 429827 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.

Search vulnerabilities

Results 429,827

Export CSV
CVE-2026-99642

mm/gup: check folio->mapping under folio lock in memfd_pin_folios()

In the Linux kernel, the following vulnerability has been resolved: mm/gup: check folio->mapping under folio lock in memfd_pin_folios() memfd_pin_folios() pins folios from the page cache without taking the folio lock. khugepaged or MADV_COLLAPSE can therefore replace a folio after checking its refcount while memfd_pin_folios() still pins the old folio. The caller then receives a folio which is no longer part of the memfd. For udmabuf and iommufd, this can cause data corruption: DMA accesses the detached folio rather than the live memfd contents. DMA reads can return stale data, while DMA writes update the detached copy and are lost from the live memfd. The detached folio remains pinned, so these accesses do not constitute a use-after-free or target another application's memory. For memfd live update, the stale contents can reappear in the memfd after handover. Lock the folio and recheck folio->mapping before pinning it, like other page cache users do. If the folio was removed, retry the folio lookup from the index that was removed.

CVSS n/a EPSS n/a KEV · Not listed
Vendors
Products
CVE-2026-99641

ovl: fail the mount if the casefold flag has changed

In the Linux kernel, the following vulnerability has been resolved: ovl: fail the mount if the casefold flag has changed An unprivileged user in a user namespace can repeatedly trigger a kernel warning with their own overlay mounts. They do so by changing the casefold flag of the topmost layer's empty root, the top directory of that layer, after the layers are set and before the mount is created. The casefold flag of a directory makes name lookups in that directory case-insensitive. All layers of an overlay must agree on casefolding. ovl_mount_dir_check() reads the casefold flag of a layer root when fsconfig() sets that layer, and saves the result in ofs->casefold. The mount is created later, by another fsconfig() call with FSCONFIG_CMD_CREATE. The casefold flag of an empty directory can be changed. The casefold flag of the overlay root must match ofs->casefold. ovl_get_root() copies the flag from the topmost layer root, as it is when the mount is created. On a mismatch, ovl_get_root() only does a WARN_ON(), and the mount continues. The check is not a WARN_ON_ONCE(), so each such mount warns again. An unprivileged user needs CONFIG_UNICODE, and a tmpfs mounted with the casefold option in their namespace. Reproduced by changing the casefold flag of the empty upper directory after the layers were set and before FSCONFIG_CMD_CREATE, with tmpfs and ext4 layers, and as uid 1000 in a user namespace. Fix this by replacing the WARN_ON() with a check that fails the mount with -EINVAL.

CVSS n/a EPSS n/a KEV · Not listed
Vendors
Products
CVE-2026-99640

ovl: do not let chattr change the casefold flag

In the Linux kernel, the following vulnerability has been resolved: ovl: do not let chattr change the casefold flag chattr +F or -F on an overlay directory can make the directory, or the whole mount, unusable. Lookups of the directory, and lookups in it, then fail. From code inspection, the caller only needs to own the directory. The upper filesystem must support casefolding: ext4 or f2fs with the casefold feature, or tmpfs with the casefold option. chattr +F and -F set and clear FS_CASEFOLD_FL, the casefold flag of a directory. The flag enables casefolding (case-insensitive name lookup) for the directory. All directories of an overlay must match the casefold state that was recorded at mount time, and ovl_lookup_single() enforces this: - A lookup in a directory that does not match fails with -ESTALE. - A lookup of the directory itself fails with -EREMOTE. ovl_fileattr_set() copies the directory up, which creates it in the upper layer if it only existed in a lower layer. It then passes FS_CASEFOLD_FL on to the upper filesystem. The upper filesystem accepts the change if the upper directory is empty, regardless of what the merged directory contains. The merged directory is the one that the user sees, with the names from the upper and the lower directories. After the change the upper directory no longer matches the mount. If the directory is the root of the overlay, the whole mount is affected. The flag can also change without chattr +F or -F. chattr reads all flags of a directory, changes one and writes all of them back. For a directory that only exists in a lower layer, overlayfs reads the flags from the lower filesystem. xfs with the ascii-ci feature reports FS_CASEFOLD_FL on every inode, but never sets S_CASEFOLD, the inode flag that overlayfs compares with the mount. So its directories count as not casefolded. With a lower layer on such an xfs and an upper layer on ext4 with the casefold feature, chattr +A on a lower-only directory therefore sets FS_CASEFOLD_FL on the new, empty upper directory. Reproduced as root on tmpfs and on ext4 with chattr +F or -F on an overlay directory whose upper directory was empty. Afterwards lookups below it failed with ESTALE, and lookups of the directory itself failed with EREMOTE. The chattr +A case was seen once, on a kernel with an earlier form of this patch that still passed the caller's flag on: lookups of the directory failed with EREMOTE. Fix this by returning -EOPNOTSUPP if FS_IOC_SETFLAGS, the only call that can change the flag, asks for a casefold flag on a directory that does not agree with the casefold state of the mount. This also refuses the chattr +A case above. [amir: check the flag against the casefold state of the mount instead of reading back the flags]

CVSS n/a EPSS n/a KEV · Not listed
Vendors
Products
CVE-2026-99638

net/sched: clamp skb->queue_mapping before indexing the tx queue

In the Linux kernel, the following vulnerability has been resolved: net/sched: clamp skb->queue_mapping before indexing the tx queue This issue was caught by Sashiko (nipa). A producer-side path cap is already merged (ea4d4b5dddb5); this patch adds the matching consumer-side caps. The issue: The tx queue is picked and capped in netdev_core_pick_tx() before the __dev_xmit_skb() qdisc enqueue path. A tc BPF program running inside an egress qdisc (not clsact) can then change __sk_buff->queue_mapping; that store is never re-checked. bpf_convert_ctx_access() bounds it only by NO_QUEUE_MAPPING, not by the device's queue count. Two consumers read the stale value: - On dequeue, qdisc_restart() calls netdev_get_tx_queue(), which indexes dev->_tx[]. netdev_get_tx_queue() guards it with just a DEBUG_NET_WARN_ON_ONCE, so sch_direct_xmit() takes the out-of-bounds txq->_xmit_lock and writes txq->xmit_lock_owner past the end of the allocation on non-lltx devices such as ifb. Drivers that index their rings from skb_get_queue_mapping() (ex: ifb) go out of range the same way. - On enqueue, taprio_enqueue() indexes q->qdiscs[] with the same value; the array is sized dev->num_tx_queues. A duplicating netem on a child qdisc clones the skb and re-enqueues the clone at the taprio root (qdisc_root_bh()) through a direct rootq->enqueue() call, so the value reaches taprio_enqueue() before any dequeue cap runs. The Fix: Cap the mapping at the consumers and write the capped value back, so the qdisc's _tx[] lookup, the taprio q->qdiscs[] lookup and any later driver read stay in range. On the dequeue side the cap folds into the dequeue path instead of a separate walk over the returned list: dequeue_skb() caps the head, and each bulk helper caps the element it appends. For a qdisc that is not TCQ_F_ONETXQUEUE, netdev_cap_txqueue() logs a ratelimited notice and selects queue 0. A TCQ_F_ONETXQUEUE qdisc is bound to a single tx queue: dequeue_skb() uses q->dev_queue for the frozen check, the BQL limit and the trace point, while qdisc_restart() transmits on the skb's queue. Capping an out-of-range mapping to queue 0 would therefore send a per-queue child's skb through a different queue than the one it was dequeued for. On mq, mqprio, taprio and htb offload children, a stopped queue 0 could then park the list in q->gso_skb, and the later wake would schedule queue 0's own child instead of this qdisc. Pin a TCQ_F_ONETXQUEUE mapping to the qdisc's own queue to keep the documented invariant. The pin covers every mapping, not only an out-of-range one: an in-range mapping that a filter sets on one of those per-queue children is rewritten to the child's own queue, and this path does not call netdev_cap_txqueue(), so it logs no notice. On a single-queue device qdisc_create() sets TCQ_F_ONETXQUEUE, so the one-queue trigger described below also takes this branch and is corrected without a notice. That also keeps a bulk list on one queue by construction: every element of a TCQ_F_ONETXQUEUE qdisc, including a follower changed by a filter, is pinned to q->dev_queue before it is appended. The fast bulk helper therefore needs no head comparison and no skb_bad_txq requeue; the slow helper, used only by non-ONETXQUEUE qdiscs, still compares and requeues a mismatched follower, where a wake on any queue reschedules q. On the enqueue side taprio_enqueue() caps the mapping against real_num_tx_queues and writes it back before selecting q->qdiscs[queue], so a duplicating child cannot steer the clone out of the array. Conditions to recreate the bug: The dequeue path: load a SCHED_CLS or SCHED_ACT program that stores __sk_buff->queue_mapping (a tc BPF action is enough), attach it to a transmit qdisc (for example a matchall filter on a prio root), and send a packet. With a 1-queue device a store of 1 indexes one past dev->_tx[]. Under KASAN with panic_on_warn=1 the unfixed kernel faults with "BUG: KASAN: slab-out- ---truncated---

CVSS n/a EPSS n/a KEV · Not listed
Vendors
Products
CVE-2026-99635

vhost/vsock: size receive SKBs from declared payload

In the Linux kernel, the following vulnerability has been resolved: vhost/vsock: size receive SKBs from declared payload vhost_vsock_alloc_skb() sizes the skb from iov_length(), the total guest descriptor length. virtio_transport_inc_rx_pkt() instead adds hdr->len to rx_bytes and buf_used, and budgets each queued skb as SKB_TRUESIZE(0). The guest controls the descriptor length and hdr->len independently. A guest can therefore provide a 64 KiB descriptor while declaring a zero payload. The descriptor-sized skb remains queued, rx_bytes and buf_used remain unchanged, and only the fixed queue-entry budget limits retention. This is not a lifetime leak: the skb is freed when dequeued or at socket teardown. Repeating this across connections can nevertheless exhaust host memory. On Linux v7.2, 455 such descriptors retained 30,255,680 bytes for a 262,144-byte receive buffer; a full-payload control retained 265,984 bytes. Vhost previously read hdr->len and allocated pkt->buf from that value. The conversion from virtio_vsock_pkt to sk_buff instead allocated receive skbs from the descriptor length, introducing the allocation-accounting mismatch. Copy the header into a stack object and validate hdr->len before allocating the skb. Size the allocation as sizeof(hdr) + payload_len so descriptor capacity no longer determines queued memory. Check payload_len against len - sizeof(hdr) to avoid addition overflow on 32-bit hosts.

CVSS n/a EPSS n/a KEV · Not listed
Vendors
Products
CVE-2026-99632

drm/amdkfd: use the queue's process info for the WPTR BO eviction fence

In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: use the queue's process info for the WPTR BO eviction fence amdgpu_amdkfd_map_gtt_bo_to_gart() removes the eviction fence of bo->vm_bo->vm->process_info from the WPTR BO of a new queue. bo->vm_bo is the VM which opened the BO last, not necessarily the KFD process' VM, and a render node VM has no process info. On navi31, an unprivileged process which exports its WPTR BO with AMDKFD_IOC_EXPORT_DMABUF and imports it on a second render node fd oopses in AMDKFD_IOC_CREATE_QUEUE: BUG: kernel NULL pointer dereference, address: 0000000000000060 RIP: 0010:amdgpu_amdkfd_map_gtt_bo_to_gart+0x86/0x1a0 [amdgpu] init_user_queue.part.0+0x180/0x250 [amdgpu] pqm_create_queue+0x32d/0x730 [amdgpu] kfd_ioctl_create_queue+0x583/0x9f0 [amdgpu] Pass the process info of the queue instead. With the fix, the queue is created and destroyed normally. (cherry picked from commit 6b4157498a176bd1c6083f6bb5aaf8a257a2027e)

CVSS n/a EPSS n/a KEV · Not listed
Vendors
Products
CVE-2026-99628

drm/amd/display: Avoid closing unowned DDC pins

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Avoid closing unowned DDC pins [WHY] dal_ddc_open() cleans up pins it acquires on later failures. If the data-pin open fails, this attempt acquired nothing. If opening the clock pin or configuring fails, dal_ddc_open() closes the pins it opened. An extra dal_ddc_close() is unnecessary and unsafe: GPIO_RESULT_ALREADY_OPENED can mean AUX owns the existing handles, and closing them here would disrupt AUX. [HOW] Remove the extra dal_ddc_close() from the failed-open path. (cherry picked from commit 175ae7772b68757b4932f34ff862923cab7abe21)

CVSS n/a EPSS n/a KEV · Not listed
Vendors
Products
CVE-2026-99623

drm/amdgpu: Clamp the ATIF backlight curve to its 99 points

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Clamp the ATIF backlight curve to its 99 points amdgpu_atif_query_backlight_caps() stores the firmware's number_of_points as data_points but copies only the 99 points that luminance_data[] holds. number_of_points is a u8, so a firmware table that claims more makes the custom curve code in amdgpu_dm index past the array, and dm_query_extended_brightness_caps() copy past the end of the data_points[] buffer it fills Clamp the count to ATIF_QBTC_MAX_DATA_POINTS and warn, since a table that claims more is a firmware bug (cherry picked from commit af8a1c2b7d3de4960e10f94e8ba2fc0ccd168072)

CVSS n/a EPSS n/a KEV · Not listed
Vendors
Products
CVE-2026-99621

drm/amdgpu: unlock the VM and BO when attaching a KFD BO fails

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: unlock the VM and BO when attaching a KFD BO fails kfd_mem_attach() locks the page directory and the BO with a drm_exec transaction on its stack, but leaves through the unwind label without drm_exec_fini() when locking fails, e.g. when MAP_MEMORY_TO_GPU gets a signal while the page directory or the BO is busy. Reservations already acquired then remain locked with their ww_acquire_ctx pointing into the expired stack frame. With one thread doing GEM_VA map/unmap on the KFD VM and another one mapping KFD BOs while getting SIGUSR1 every 20 us: BUG: KASAN: stack-out-of-bounds in __ww_mutex_lock.constprop.0+0x34f5/0x3da0 ww_mutex_lock_interruptible+0x2f/0x150 drm_exec_lock_obj+0x107/0x2d0 [drm_exec] kfd_mem_attach+0x4dd/0x1b60 [amdgpu] and the process ends up in D state. Finish the transaction before unwinding. (cherry picked from commit 7b885fa27e4b9fa5cbdc64e66fc35872aee296f5)

CVSS n/a EPSS n/a KEV · Not listed
Vendors
Products
CVE-2026-99615

l2tp: only return sessions of the given tunnel in l2tp_session_get()

In the Linux kernel, the following vulnerability has been resolved: l2tp: only return sessions of the given tunnel in l2tp_session_get() Commit 5f77c18ea556 ("l2tp: use IDR for all session lookups") made pppol2tp_connect() and the netlink session commands find sessions with l2tp_session_get(), passing the socket of the tunnel they name. L2TPv3 session IDs are unique per network namespace, except that sessions carried over UDP are only unique per UDP socket, the socket of their tunnel. However, l2tp_v3_session_get() only checks the socket when another session has the same session ID. Otherwise it returns the session, whichever tunnel it belongs to. As of now, a session command that names the wrong tunnel acts on a session of another tunnel, and a PPPoL2TP socket for a second L2TPv3 tunnel fails with EEXIST, because it finds session 0 of the first tunnel. The issue can be reproduced with: ip l2tp add tunnel tunnel_id 3 peer_tunnel_id 3 encap udp \ local 127.0.0.1 remote 127.0.0.1 udp_sport 5003 udp_dport 6003 ip l2tp add tunnel tunnel_id 4 peer_tunnel_id 4 encap udp \ local 127.0.0.1 remote 127.0.0.1 udp_sport 5004 udp_dport 6004 ip l2tp add session tunnel_id 3 session_id 7 peer_session_id 7 ip l2tp del session tunnel_id 4 session_id 7 ip l2tp show session Before that commit, the delete fails with "No such device", and session 7 of tunnel 3 is still listed. After that commit, the delete succeeds, and session 7 of tunnel 3 is gone. This patch will make l2tp_session_get() return NULL when the L2TPv3 session it finds does not belong to the given socket. The receive path calls l2tp_v3_session_get() directly and is not changed.

CVSS n/a EPSS n/a KEV · Not listed
Vendors
Products
CVE-2026-99610

ALSA: caiaq: free the EP4 URB when input setup fails

In the Linux kernel, the following vulnerability has been resolved: ALSA: caiaq: free the EP4 URB when input setup fails The three controllers that use the EP4 input URB allocate it before checking the endpoint type and before registering the input device. On failure they jump to exit_free_idev, which clears cdev->input_dev but leaves cdev->ep4_in_urb set. The card teardown then calls snd_usb_caiaq_input_free(), which returns early because input_dev is NULL, so the URB is never freed. Release the URB before dropping the input device on the error path.

CVSS n/a EPSS n/a KEV · Not listed
Vendors
Products
CVE-2026-99608

ALSA: usx2y: Guard the playback copy

In the Linux kernel, the following vulnerability has been resolved: ALSA: usx2y: Guard the playback copy usx2y_urb_play_prepare() sums the packet lengths of a whole URB, copies that many frames with a single wrap, and sizes each playback packet from the capture packet's actual_length. Three things are unchecked: that the URB fits in the ring buffer, that a packet fits in the playback endpoint's maxpacksize, from which tmpbuf is allocated, and that actual_length is a whole number of frames. The ISO descriptors take the raw actual_length while transfer_buffer_length and the copies take count * stride, so a packet that is not a multiple of the stride makes the descriptors add up to more than the buffer, by up to stride - 1 bytes per packet. Return -EPIPE, as the existing packet-size check does, when the URB is larger than the buffer or a packet is larger than maxpacksize, and size each descriptor from whole frames, so the descriptors add up to transfer_buffer_length and each stays within maxpacksize. The buffer case is prevented by the previous patch and this is the guard for it; the other two depend only on the device. The first case is reachable on the unpatched driver with ordinary packets: on 7.3-rc7, a USB/IP device presenting the US-122 interface layout and sending 48-frame packets, with a 100-frame playback buffer (two 50-frame periods, inside the stock constraints), KASAN reports: BUG: KASAN: out-of-bounds in i_usx2y_urb_complete+0x79b/0x1ac0 Read of size 18446744073709551280 at addr ffff88800e6b02e0 by task vhci_rx/80 With both patches, the same device and a 200-frame playback buffer is refused at hw_params with EINVAL, and a 400-frame buffer plays for 30 s with the position advancing inside the buffer, no KASAN report and neither guard message. The maxpacksize check is not exercised: the emulated device reports the same wMaxPacketSize on both endpoints. The descriptor case is visible with capture packets of 195 bytes at stride 4 (48 frames and 3 bytes): without this change the four descriptors add up to 780 bytes for 768 bytes of data, and USB/IP's completion check refuses the URB ("total length of iso packets 780 not equal to actual length of buffer 768", -EPROTO), after which the driver stops the streams. With this patch every descriptor is 192 bytes, the descriptors add up to the data in every URB for 30 s, the position advances inside the buffer and KASAN reports nothing. The 48-frame playback run above is unchanged.

CVSS n/a EPSS n/a KEV · Not listed
Vendors
Products
CVE-2026-99606

net/smc: don't spin in smc_rx_recvmsg() while a pipe holds spliced data

In the Linux kernel, the following vulnerability has been resolved: net/smc: don't spin in smc_rx_recvmsg() while a pipe holds spliced data While bytes spliced off the RMB are still in a pipe, recvmsg() waits for the pipe to release them before it copies the data behind them. The path to that wait skips the timeout and signal checks, and smc_rx_wait() returns at once on RCV_SHUTDOWN. With a signal pending, after SHUT_RD, or once the peer closes or shuts down writing, recvmsg() spins on a CPU until the pipe is drained, and SIGKILL cannot stop it. MSG_DONTWAIT and an expired SO_RCVTIMEO wait there too instead of returning -EAGAIN. Check the timeout and signals before that wait, and end it when the pipe releases the data or the connection is killed, not on RCV_SHUTDOWN. A zero-length read returns 0 without waiting for the pipe; a non-blocking one returns -EAGAIN while poll() still reports the socket readable (splice() can still take those bytes). The wait sets SOCKWQ_ASYNC_WAITDATA like smc_rx_wait(), so a byte arriving behind the pipe raises no SIGIO on a reader already asleep for it, and a full barrier orders its wait queue entry before its read of splice_pending, so no wake is lost.

CVSS n/a EPSS n/a KEV · Not listed
Vendors
Products
CVE-2026-99604

drm/etnaviv: Flush the tile status cache through both the PE and BLT

In the Linux kernel, the following vulnerability has been resolved: drm/etnaviv: Flush the tile status cache through both the PE and BLT Since commit f232d9ec029c ("drm/etnaviv: fix TS cache flushing on GPUs with BLT engine"), jobs on GPUs with a BLT engine use a BLT command to flush the tile status cache instead of TS_FLUSH_CACHE, which is broken on most of these GPUs. GC7000 r6008/r6009 and GC8200 r6401 are the other way around: TS_FLUSH_CACHE works, but the BLT command does not flush the cache. The vendor driver handles these GPUs using TS_FLUSH_CACHE, but the etnaviv kernel driver has no way to identify them. As a result, dirty tile status cache lines survive the end of a job. They are written back by the next cache flush, using the page table of the job issuing it. If that job belongs to another process, the write goes to the wrong address space. On GC7000 r6009 this causes MMU faults and GPU recoveries blamed on an innocent process. I see around 1100 per run of a multisample depth/stencil test running alongside two other GPU clients. Emit both flushes at the end of every job on GPUs with a BLT engine. Whichever does not work on a given GPU is a no-op. Since dirty lines are only written back once, this costs one additional state load per job.

CVSS n/a EPSS n/a KEV · Not listed
Vendors
Products
CVE-2026-99595

sched/fair: Clear throttle state when leaving the fair class

In the Linux kernel, the following vulnerability has been resolved: sched/fair: Clear throttle state when leaving the fair class Task-based CFS bandwidth throttling removes a task's fair sched_entity while the scheduler core still considers the task queued. p->throttled carries the fair-specific state across dequeue/enqueue operations. DEQUEUE_CLASS removes the task from cfs_rq->throttled_limbo_list but retains the bit. If the last finite CFS quota is disabled while the task runs in another class, it is absent from the unthrottle walk and the bit survives. Returning to fair while cfs_bandwidth_used() is false then performs a real fair enqueue with p->throttled still set. After bandwidth is re-enabled, a class-change dequeue treats the stale bit as limbo state and skips __dequeue_task(). p->se.on_rq therefore remains set, and put_prev_task_fair() places the entity in the EEVDF tree while the task moves to RT. On exit, the fair picker can select the TASK_DEAD task. __schedule() then returns to do_task_dead(), which hits BUG(). Keep p->throttled across migrations and group moves, but clear it on DEQUEUE_CLASS because fair-specific state must not outlive fair-class membership. A later return to fair uses the normal enqueue path. That path still respects a throttled cfs_rq. A KASAN, LOCKDEP and DEBUG_LIST v7.3 kernel reproduced the do_task_dead() BUG in 3/3 root and 3/3 delegated uid-1000 runs with CapPrm=CapEff=0 and RLIMIT_RTPRIO=1. The fix passed both matrices plus a 3/3 class-switch control with bandwidth continuously enabled, without a scheduler warning, KASAN report, lockdep splat or crash. An AI coding assistant analyzed the state mismatch and drafted the initial reproducer, fix candidate and this changelog. The source paths, trigger, controls and results were rechecked against the cited revisions.

CVSS n/a EPSS n/a KEV · Not listed
Vendors
Products
CVE-2026-99594

arm64: kexec_file: Fix elf_headers memory leak in retry loop

In the Linux kernel, the following vulnerability has been resolved: arm64: kexec_file: Fix elf_headers memory leak in retry loop A retry allocates new elf headers and overwrites image->elf_headers, leaking the previous buffer. Free it before assigning. [catalin.marinas@arm.com: drop the redundant NULL check before vfree()]

CVSS n/a EPSS n/a KEV · Not listed
Vendors
Products
CVE-2026-99571

nvme-tcp: Validate the queue state under the queue lock in the address attribute

In the Linux kernel, the following vulnerability has been resolved: nvme-tcp: Validate the queue state under the queue lock in the address attribute Reading the "address" sysfs attribute calls kernel_getsockname() on the admin queue socket, which can race with the queue teardown during connection error recovery: a reader can observe NVME_TCP_Q_LIVE set, then block on the queue lock while nvme_tcp_free_queue() releases the socket and clears queue->sock without holding the lock. Once the reader acquires the lock it dereferences the NULL socket pointer. Commit 76d54bf20cdc ("nvme-tcp: don't access released socket during error recovery") had the queue liveness check inside the lock. Commit 782373ba2766 ("nvme: tcp: avoid race between queue_lock lock and destroy") moved it back out because the lock itself is destroyed in nvme_tcp_free_queue(), so a reader arriving late trips mutex_destroy(). Check the queue liveness inside the queue lock, and clear queue->sock under the same lock. The teardown clears NVME_TCP_Q_LIVE under the lock well before the socket is released, so a reader either sees the bit cleared or a socket that cannot be released while it holds the lock. To also close the lock lifetime race, the queue locks are now owned by the controller: they are initialized with the queue array and only destroyed when the controller is freed, which cannot happen while a sysfs attribute read is still in progress. The queue count is computed by the NVME_TCP_OPT_NR_QUEUES() macro from the original connect options for both initialization and destruction, as reconnects may shrink ctrl->queue_count.

CVSS n/a EPSS n/a KEV · Not listed
Vendors
Products
CVE-2026-99570

f2fs: fix to invalidate curseg if change_curseg() fails

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to invalidate curseg if change_curseg() fails Our consistency stress test (fsstress + fio + atomic write workers + "f2fs_io shutdown 1") triggers below kernel BUG: F2FS-fs (vdd): Stopped filesystem due to reason: 0 ------------[ cut here ]------------ kernel BUG at fs/f2fs/segment.c:3989! Oops: invalid opcode: 0000 [#1] SMP KASAN PTI Workqueue: writeback wb_workfn (flush-253:48) RIP: 0010:f2fs_allocate_data_block+0x257a/0x38e0 Call Trace: <TASK> do_write_block+0x155/0xc10 f2fs_outplace_write_data+0x192/0x340 f2fs_do_write_data_page+0xc57/0x1880 f2fs_write_single_data_page+0xda9/0x15a0 f2fs_write_cache_pages+0x973/0x1f20 __f2fs_write_data_pages+0x6c4/0x1890 do_writepages+0x21e/0x560 __writeback_single_inode+0x119/0x11b0 writeback_sb_inodes+0x67d/0x17a0 wb_writeback+0x207/0x820 wb_workfn+0x128/0xc30 process_one_work+0x925/0x1600 worker_thread+0x60a/0xff0 kthread+0x35f/0x460 ret_from_fork+0x474/0x7e0 ret_from_fork_asm+0x1a/0x30 </TASK> The BUG is f2fs_bug_on(sbi, curseg->next_blkoff >= BLKS_PER_SEG(sbi)) in f2fs_allocate_data_block(), next_blkoff was 512. The root cause is a race in between atomic write commit and shutdown as below: Thread A (commit atomic write) Thread B (shutdown) Thread C (writeback) - f2fs_ioc_commit_atomic_write - f2fs_commit_atomic_write - __f2fs_commit_atomic_write - __replace_atomic_write_block - f2fs_replace_block - __f2fs_replace_block - f2fs_ioc_shutdown - f2fs_do_shutdown : F2FS_GOING_DOWN_METASYNC - f2fs_sync_fs - f2fs_write_single_data_page : pass f2fs_cp_error() check - f2fs_stop_checkpoint : set CP_ERROR_FLAG - change_curseg - reset_curseg : curseg->segno = new_segno : curseg->alloc_type = SSR : curseg->next_blkoff = __next_free_blkoff() which is BLKS_PER_SEG if there is no free slot in new_segno - f2fs_get_sum_cache : return -EIO due to f2fs_cp_error() : return error w/o restoring curseg : goto out_unlock, skip restoring old segno, blkoff and alloc_type - f2fs_do_write_data_page - f2fs_outplace_write_data - do_write_block - f2fs_allocate_data_block : curseg->segno is valid : f2fs_bug_on(next_blkoff >= BLKS_PER_SEG) Since commit 86f33603f8c5 ("f2fs: handle errors of f2fs_get_meta_page_nofail"), change_curseg() can fail after the curseg has already been switched to the new segment, then the curseg is left in an inconsistent state: it points to a segment which may have no free slot, its summary block is zeroed, and the caller can not restore it. Subsequent block allocation on the curseg will trigger the BUG. Moreover, the writeback thread dies with curseg_lock, curseg_mutex and sentry_lock held, so the commit, shutdown and other I/O threads hang in D state. Since change_curseg() only fails once CP_ERROR_FLAG is set, no checkpoint will be committed afterward, let's invalidate the curseg via reset_curseg_fields() on failure, as new_curseg() does for -ENOSPC, then f2fs_allocate_data_block() will fail with -ENOSPC on the curseg instead of triggering BUG, and do_write_block() can handle the error since CP_ERROR_FLA ---truncated---

CVSS n/a EPSS n/a KEV · Not listed
Vendors
Products
CVE-2026-133489

XiangLi1999 Diffusion-LM text_sample.py main path traversal

A security vulnerability has been detected in XiangLi1999 Diffusion-LM up to 759889d58ef38e2eed41a8c34db8032e072826f4. This issue affects the function main of the file improved-diffusion/scripts/text_sample.py. Such manipulation of the argument out_dir leads to path traversal. The attack can be executed remotely. The exploit has been disclosed publicly and may be used. This product implements a rolling release for ongoing delivery, which means version information for affected or updated releases is unavailable. The project was informed of the problem early through an issue report but has not responded yet.

CVSS 4.0 · 5.3 Medium EPSS n/a KEV · Not listed
Vendors
Products
CVE-2026-133488

XiangLi1999 Diffusion-LM infill.py os.system os command injection

A weakness has been identified in XiangLi1999 Diffusion-LM up to 759889d58ef38e2eed41a8c34db8032e072826f4. This vulnerability affects the function os.system of the file improved-diffusion/scripts/infill.py. This manipulation of the argument notes causes os command injection. Remote exploitation of the attack is possible. The exploit has been made available to the public and could be used for attacks. This product follows a rolling release approach for continuous delivery, so version details for affected or updated releases are not provided. The project was informed of the problem early through an issue report but has not responded yet.

CVSS 4.0 · 5.3 Medium EPSS n/a KEV · Not listed
Vendors
Products