Export limit exceeded: 429817 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.

Search vulnerabilities

Results 429,817

Export CSV
CVE-2026-99681

blk-mq: fix out-of-bounds read in blk_mq_free_rqs

In the Linux kernel, the following vulnerability has been resolved: blk-mq: fix out-of-bounds read in blk_mq_free_rqs A KASAN slab-out-of-bounds read can occur in blk_mq_free_rqs() when there is a mismatch between the number of hardware queues allocated for the IO scheduler (et->nr_hw_queues) and the number of hardware queues in the block tag set (set->nr_hw_queues). This mismatch can happen if blk_mq_update_nr_hw_queues() fails halfway through (e.g., due to memory pressure during blk_mq_prealloc_tag_set_tags()). In this error path, the elevator is restored with a larger number of hardware queues than the block tag set actually has. When the elevator is later freed, blk_mq_free_sched_tags() iterates up to the new et->nr_hw_queues and calls blk_mq_free_rqs(). In blk_mq_free_rqs(), it attempts to access set->tags[hctx_idx] to get the driver tags. Because set->nr_hw_queues was not updated due to the earlier failure, set->tags still has the old (smaller) size, leading to an out-of-bounds read. BUG: KASAN: slab-out-of-bounds in blk_mq_free_rqs+0xde/0x680 Read of size 8 at addr ffff88818d67fc28 by task syz-executor117/5839 Call Trace: blk_mq_free_rqs+0xde/0x680 blk_mq_free_map_and_rqs+0x40/0xf0 blk_mq_free_sched_tags blk_mq_free_sched_res+0xeb/0x280 elevator_change_done+0x1d2/0x5c0 elevator_change+0x34f/0x480 elv_iosched_store+0x504/0x630 queue_attr_store+0x207/0x2b0 To fix this, explicitly check if hctx_idx < set->nr_hw_queues before accessing set->tags[hctx_idx]. If hctx_idx >= set->nr_hw_queues, the hardware queue doesn't exist in the tag set, meaning there are no driver tags to clear mappings from. In this case, safely set drv_tags to NULL. The subsequent call to blk_mq_clear_rq_mapping() already handles a NULL drv_tags pointer and will safely return.

CVSS n/a EPSS n/a KEV · Not listed
Vendors
Products
CVE-2026-99680

xfs: mark the inode preallocated for pNFS write layouts past EOF

In the Linux kernel, the following vulnerability has been resolved: xfs: mark the inode preallocated for pNFS write layouts past EOF xfs_fs_map_blocks() marks the inode XFS_DIFLAG_PREALLOC only when it allocates blocks for a write layout. A write layout past EOF can also hand out allocated blocks, such as speculative preallocation. blockgc then frees them under the layout, and another file may get them. Mark the inode whenever a write mapping ends past EOF.

CVSS n/a EPSS n/a KEV · Not listed
Vendors
Products
CVE-2026-99679

xfs: refuse a pNFS LAYOUTCOMMIT of a range without blocks

In the Linux kernel, the following vulnerability has been resolved: xfs: refuse a pNFS LAYOUTCOMMIT of a range without blocks A client can commit a hole in a LAYOUTCOMMIT, because nfsd does not check the extents against its layouts. xfs_iomap_write_unwritten() then allocates written blocks there. A large hole overruns the block reservation and shuts XFS down. A small one exposes stale data. Refuse such a range with -EIO, using XFS_BMAPI_CONVERT_ONLY.

CVSS n/a EPSS n/a KEV · Not listed
Vendors
Products
CVE-2026-99678

xfs: cap the block count of xfs_iomap_write_direct() at one extent

In the Linux kernel, the following vulnerability has been resolved: xfs: cap the block count of xfs_iomap_write_direct() at one extent xfs_iomap_write_direct() reserves blocks for the whole count in an unsigned int. For a pNFS layout the client chooses that count, and an RW LAYOUTGET for 16 TiB wraps the reservation and shuts XFS down. xfs_bmapi_write() maps at most XFS_MAX_BMBT_EXTLEN blocks here, so cap the count at that. nfsd asks again for the rest. The other callers get the same mapping as before.

CVSS n/a EPSS n/a KEV · Not listed
Vendors
Products
CVE-2026-99677

xfs: clamp the pNFS layout range to the maximum file size

In the Linux kernel, the following vulnerability has been resolved: xfs: clamp the pNFS layout range to the maximum file size xfs_fs_map_blocks() lets two bad layout ranges through. An offset of 2^63 or more is negative and passes "offset > limit". A length above the limit, such as NFS4_UINT64_MAX, wraps "offset > limit - length" and stays unclamped. With NFS4_UINT64_MAX, a read layout is built from an uninitialized mapping. Reject a negative offset and one at the limit, and clamp the length. This needs "xfs: cap the block count of xfs_iomap_write_direct() at one extent".

CVSS n/a EPSS n/a KEV · Not listed
Vendors
Products
CVE-2026-99676

net: restore refcount ordering for lockless socket access

In the Linux kernel, the following vulnerability has been resolved: net: restore refcount ordering for lockless socket access Before commit fb041bb7c0a9 ("locking/refcount: Consolidate implementations of refcount_t"), default builds implemented refcount_inc_not_zero() using atomic_add_unless(), which provided full memory ordering on success. The commit removed that ordering on weakly ordered architectures, allowing accesses after a successful reference acquisition to be reordered before it. Use refcount_inc_not_zero_acquire() in the IPv4 and IPv6 established lookups and in inet_twsk_purge(), where the socket is validated again after taking a reference. bpf_sk_assign() can receive a socket pointer obtained through BTF without a reference. Use acquire ordering when it takes its own reference for a refcounted socket. Use refcount_set_release() when setting refcounts in the SYN cookie, TCP Fast Open, request migration, and TIME_WAIT paths. Keep the existing TIME_WAIT smp_wmb(), which separately orders the refcount store before ehash publication.

CVSS n/a EPSS n/a KEV · Not listed
Vendors
Products
CVE-2026-99675

nvmet: reject keep-alive timeouts that would overflow

In the Linux kernel, the following vulnerability has been resolved: nvmet: reject keep-alive timeouts that would overflow nvmet_set_feat_kato() and nvmet_alloc_ctrl() convert the 32-bit millisecond KATO from the host to seconds with DIV_ROUND_UP(kato, 1000). The addition in DIV_ROUND_UP() is done in 32 bits, so any KATO above 4294966296 ms wraps around and rounds to 0 seconds. A Set Features command with KATO 0xffffffff then succeeds but disables the keep-alive timer: Get Features returns 0 and Keep Alive fails with Keep Alive Timeout Invalid. A Connect command with such a KATO creates a controller without a keep-alive timer. The converted value has more consumers that can overflow. Get Features multiplies it by 1000, and the timer paths multiply it by HZ in 32 bits and arm a delay that must not exceed MAX_JIFFY_OFFSET. Reject a KATO whose rounded value does not fit all of these. Return Keep Alive Timeout Invalid from both Set Features and Connect. Validate Set Features before stopping the current timer so a failed update leaves its timeout unchanged. Round in 64 bits. A KATO of 0 keeps its current meaning.

CVSS n/a EPSS n/a KEV · Not listed
Vendors
Products
CVE-2026-99674

can: dev: can_dropped_invalid_skb: drop CAN XL frames on non-CAN XL devices

In the Linux kernel, the following vulnerability has been resolved: can: dev: can_dropped_invalid_skb: drop CAN XL frames on non-CAN XL devices Sending a PF_PACKET bypasses the CAN framework logic and can directly reach a CAN driver's xmit() function. The PF_PACKET framework only checks that skb->len does not exceed the net_device MTU. For a CAN device that is not CAN XL capable, anything above CANFD_MTU (72 bytes) is therefore dropped before it reaches the driver. However, CAN XL frames are variable length. can_is_canxl_skb() accepts lengths in the range CANXL_HDR_SIZE + CANXL_MIN_DLEN up to CANXL_MTU, i.e. 13 to 2060 bytes. As a result, an ETH_P_CANXL skb with a length between 13 and 72 bytes can pass both the MTU and the can_dropped_invalid_skb() checks. A driver that does not support CAN XL will interpret canxl_frame->flags as a length because of the overlap with can_frame->len. And because CANXL_XLF is set, the resulting length is between 128 and 255. For drivers that do not check can_frame->len before copying can_frame->data, as most drivers do, this results in a buffer overflow of up to 247 bytes. Drop ETH_P_CANXL skbs if the device does not have the CAN_CAP_XL capability. Keep can_is_canxl_skb() for the validation of CAN XL skbs.

CVSS n/a EPSS n/a KEV · Not listed
Vendors
Products
CVE-2026-99673

can: replace ARPHRD_CAN type checks with can_get_ml_priv()

In the Linux kernel, the following vulnerability has been resolved: can: replace ARPHRD_CAN type checks with can_get_ml_priv() Commit 4e096a18867a ("net: introduce CAN specific pointer in the struct net_device") introduced an explicit way to assign the midlayer private pointer (dev->ml_priv) to named users like ML_PRIV_CAN. A valid pointer returned by can_get_ml_priv() therefore identifies a real CAN device. The referenced commit only converted the j1939 and proc code to this check, while the other parts of the CAN subsystem still rely on dev->type == ARPHRD_CAN. The TUNSETLINK ioctl allows a down TUN/TAP device to set its hardware type to ARPHRD_CAN while dev->ml_priv remains NULL. Such a repurposed netdevice passes the ARPHRD_CAN checks. Commit 8aa59e355949 ("can: af_can: fix NULL pointer dereference in can_rx_register()") already made can_rx_register() reject such devices. But can_rx_unregister() still only checks dev->type and dereferences the NULL ml_priv when it walks the receive lists of the device. CAN_ISOTP reaches this path: isotp_bind() ignores the return values of can_rx_register() and binds the socket anyway. When the socket is released or the device is unregistered, isotp_release() and isotp_notify() remove the filters that have never been registered and trigger the NULL pointer dereference in can_rx_unregister(). This only requires owning a TUN/TAP device or CAP_NET_ADMIN in an unprivileged user namespace. Convert the remaining ARPHRD_CAN checks in af_can, bcm, gw, isotp and raw to can_get_ml_priv().

CVSS n/a EPSS n/a KEV · Not listed
Vendors
Products
CVE-2026-99672

can: protect the receive lists with a per-device lock

In the Linux kernel, the following vulnerability has been resolved: can: protect the receive lists with a per-device lock The receive lists of a CAN device are located in the device's can_ml_priv and travel with the device when it is moved to another network namespace. But they are protected by the per-netns rcvlists_lock. So can_rx_unregister() needs dev_net(dev) to pick the right lock and silently returns when the passed namespace does not match dev_net(dev) anymore. isotp_release() and bcm_release() leave their notifier list before they take any lock that serializes against the netdev notifier, which runs under RTNL. When the bound device is moved to another namespace in this window, the notifier skips the socket and the release path has to remove the filters itself. isotp_release() passes the socket's namespace, which does not match dev_net(dev) anymore. bcm_rx_unreg() passes dev_net(dev), which can_rx_unregister() reads again for its check, so a namespace change between both reads makes the check fail as well. In both cases can_rx_unregister() silently returns. As can_rx_register() stores rcv->sk without a reference, the remaining receivers point to the freed socket (isotp) or the freed op (bcm): BUG: KASAN: use-after-free in isotp_rcv+0x1570/0x24d0 Read of size 1 at addr ffff888118130552 by task isotp_ns_uaf/578 can_rcv_filter+0x4af/0x8c0 can_receive+0x28d/0x3c0 can_rcv+0x2a9/0x310 __netif_receive_skb_one_core+0x21a/0x260 process_backlog+0x210/0x760 Besides this, the lists of a device are protected by the rcvlists_lock of the namespace that is passed in. Callers which pass dev_net(dev) read it at different times, so the same lists may be modified under the locks of different namespaces while the device is moved. Taking RTNL in these release paths is no option: raw_bind(), raw_setsockopt() and raw_release() already hold RTNL while adding and removing up to CAN_RAW_FILTER_MAX filters per socket, which unprivileged users can trigger repeatedly and which makes RTNL a global bottleneck. Instead fix the root cause and add a spinlock to struct can_dev_rcv_lists, which protects the receive lists of a CAN device or the 'any' CAN device lists of a namespace. It is initialized in can_set_ml_priv(), which is used by all CAN network devices. With this, can_rx_unregister() finds the subscription independently of the current namespace of the device. The protocols keep the device valid with their tracked references. The per-netns rcvlists_lock only protects the receive list statistics anymore, and CAN_RAW, CAN_BCM and CAN_ISOTP pass the namespace that has been used for can_rx_register(). So isotp_release() and bcm_release() now remove their filters correctly without RTNL, and raw_release(), raw_setsockopt(), raw_bind() and isotp_bind() do not need RTNL anymore and add and remove their filters under lock_sock(). To serialize bind() with NETDEV_UNREGISTER, bind() publishes the device inside the RCU section of its lookup, and raw_notify() and isotp_notify() recheck the bound device under lock_sock(). As RTNL does not keep NETDEV_DOWN out of bind() anymore, bind() checks IFF_UP after publishing the bound device, with a barrier pair against raw_notify() and isotp_notify(), so a down transition during bind() is still reported with ENETDOWN.

CVSS n/a EPSS n/a KEV · Not listed
Vendors
Products
CVE-2026-99671

can: raw, isotp: copy socket options outside of lock_sock()

In the Linux kernel, the following vulnerability has been resolved: can: raw, isotp: copy socket options outside of lock_sock() The CAN_RAW and CAN_ISOTP specific socket options are copied from and to user space while holding lock_sock(). A copy that faults or stalls, e.g. on a userfaultfd or FUSE backed mapping, holds lock_sock() for its whole duration. raw_notify() and isotp_notify() take lock_sock() of a socket that is bound to the vanishing device while holding RTNL. As the CAN_RAW options can also be changed on a bound socket, a stalled copy can block RTNL on an unregistration or namespace change of the bound device. Before "can: protect the receive lists with a per-device lock", raw_setsockopt() even held RTNL itself during the copy. CAN_ISOTP only copies its options for unbound sockets, which isotp_notify() skips without taking lock_sock(). Keep the user space copies out of the locked sections: Check the option name and length and copy the option values, including the CAN_RAW_FILTER filters, to kernel memory before lock_sock(). raw_setsockopt_locked() and isotp_setsockopt_locked() get the copied values directly and drop their now redundant length checks and copies. As a side effect, a failing copy can not leave partially overwritten options behind anymore. In raw_getsockopt() duplicate the filters under lock_sock() and copy them to user space after release_sock(). As the option name and length are now checked before lock_sock(), the order of the checks in isotp_setsockopt() and accordingly the order of the returned error values changes. This is in line with POSIX, which does not define an order in which multiple error conditions are detected and reported. The generic SOL_SOCKET options in sk_setsockopt() are not affected by this patch.

CVSS n/a EPSS n/a KEV · Not listed
Vendors
Products
CVE-2026-99670

can: dev: can_fill_info(): don't wake up controller if interface is down

In the Linux kernel, the following vulnerability has been resolved: can: dev: can_fill_info(): don't wake up controller if interface is down If the interface is down, the CAN controller might be powered down and its clocks gated. Don't call do_get_berr_counter() to read the bus error counters if the interface is down, and adjust can_get_size() to match. This removes one trigger for a synchronous external abort seen on i.MX8QXP when "ip link show" is run on a flexcan interface that was never brought up. The underlying cause is platform-specific: on i.MX8QXP the CAN clocks are gated through the SCU LPCG and the subsystem shares the IMX_SC_R_CAN_0 power domain, and there is a window after pm_runtime_resume_and_get() returns where the clock has not reached the module yet. This patch avoids the netlink query path while the interface is down, but does not root-cause the LPCG window itself. As a result, IFLA_CAN_BERR_COUNTER is no longer reported for down interfaces. Userspace must treat the attribute as optional. The issue was triggered on an i.MX8QXP board by running "ip link show" without ever bringing the interface up: Internal error: synchronous external abort: 0000000096000210 pc : flexcan_read_le+0x0/0x18 lr : flexcan_get_berr_counter+0x4c/0x8c Call trace: flexcan_read_le+0x0/0x18 flexcan_get_berr_counter+0x4c/0x8c can_fill_info+0x1f8/0x434 rtnl_fill_ifinfo+0x8fc/0xbb4 rtnl_dump_ifinfo+0x364/0x448 This is the same class of problem fixed for m_can in commit 91a55c72a821 ("can: m_can: m_can_get_berr_counter(): don't wake up controller if interface is down").

CVSS n/a EPSS n/a KEV · Not listed
Vendors
Products
CVE-2026-99669

mm/huge_memory: fix truncate racing with PMD zapping

In the Linux kernel, the following vulnerability has been resolved: mm/huge_memory: fix truncate racing with PMD zapping zap_huge_pmd_folio() removes the rmap before calling folio_mark_dirty(). If this was the last mapping, truncation can skip unmapping the folio and proceed without waiting for the PMD lock, racing with dirtying. ifs_set_range_dirty() can oops if MADV_DONTNEED races with ftruncate() on XFS, when we get the folio set dirty after it was found to not be mapped anymore. Move folio_mark_dirty() and folio_mark_accessed() before rmap removal, matching the PTE zap path. This keeps the folio mapped while updating its state, so truncation must wait for the page table lock. Fix generated by an LLM and sent by Chris Mason in private. [ david: simplify comment and description ]

CVSS n/a EPSS n/a KEV · Not listed
Vendors
Products
CVE-2026-99668

mm/huge_memory: fix zapping migration entries for device-private THPs

In the Linux kernel, the following vulnerability has been resolved: mm/huge_memory: fix zapping migration entries for device-private THPs A PMD migration entry can refer to a device-private folio. zap_huge_pmd_folio() checks the folio type instead of the entry type, so it treats such a migration entry as a device-private entry. Installing the migration entry already removed the reverse mapping and dropped the mapping reference. Zapping it must not repeat those operations. Concurrent MADV_DONTNEED during migration back to system memory can trigger this. Check the PMD entry type using pmd_is_device_private_entry(). Fix generated by an LLM and sent by Chris Mason in private. [ david: simplify description ]

CVSS n/a EPSS n/a KEV · Not listed
Vendors
Products
CVE-2026-99667

mm/khugepaged: always recheck the pmd in try_collapse_pte_mapped_thp()

In the Linux kernel, the following vulnerability has been resolved: mm/khugepaged: always recheck the pmd in try_collapse_pte_mapped_thp() try_collapse_pte_mapped_thp() drops the PTE lock after it has cleared the page table, and takes the PMD lock and the PTE lock to remove it. In between, MADV_DONTNEED with CONFIG_PT_RECLAIM can reclaim the page table. The pmd_same() check is supposed to handle this, but it is only done with CONFIG_SPLIT_PTE_PTLOCKS. Fix it by performing the check unconditionally. Fix generated by an LLM and sent by Josef Bacik in private. [ david: adjust description ]

CVSS n/a EPSS n/a KEV · Not listed
Vendors
Products
CVE-2026-99666

mm/khugepaged: fix PMD table lock leak in try_collapse_pte_mapped_thp()

In the Linux kernel, the following vulnerability has been resolved: mm/khugepaged: fix PMD table lock leak in try_collapse_pte_mapped_thp() For a private mapping with userfaultfd, try_collapse_pte_mapped_thp() takes the PMD table lock before it maps the page table for the second time. If that (pte_offset_map_rw_nolock) fails, because the page table vanished in the meantime due to concurrent page table reclaim, it leaves through the abort label, where the PMD table lock is unlocked if it differs from PTE table lock. In case the PMD table lock and the PTE table lock match, which is the case without CONFIG_SPLIT_PTE_PTLOCKS after pte_offset_map_rw_nolock() failed, we miss to unlock the PMD table. To fix it, forget the PTE table lock when we unmap+unlock the PTE table. Fix generated by an LLM and sent by Josef Bacik in private. [ david: move the ptl = NULL handling; rewrite description, drop wrong comments ]

CVSS n/a EPSS n/a KEV · Not listed
Vendors
Products
CVE-2026-99665

mm/khugepaged: preserve dirty bits when collapsing PTE-mapped THPs

In the Linux kernel, the following vulnerability has been resolved: mm/khugepaged: preserve dirty bits when collapsing PTE-mapped THPs try_collapse_pte_mapped_thp() clears PTEs without transferring their dirty bits to the folio. A shmem read fault can map a clean folio writable, so a later store only dirties the PTE. Losing that dirty bit allows reclaim to discard modified data. The assumption that regular files are read-only is also obsolete since commit 1b6444331bebb ("mm/khugepaged: enable clean pagecache folio collapse for writable files"). In any case, transferring PTE dirty bits to the folio when removing mappings (and while the folio is still mapped) is the right thing to do. Use get_and_clear_ptes() to collect the dirty bits and mark the folio dirty before unmapping it. Update the comment. This was reproduced with shmem using MADV_COLLAPSE followed by MADV_PAGEOUT. Fix generated by an LLM and sent by Chris Mason in private. [ david: adjust comment; simplify description; cover file-thp as well ]

CVSS n/a EPSS n/a KEV · Not listed
Vendors
Products
CVE-2026-99664

mm/gup: recheck the PUD under PTL in follow_pud_mask()

In the Linux kernel, the following vulnerability has been resolved: mm/gup: recheck the PUD under PTL in follow_pud_mask() follow_pud_mask() reads the PUD without a lock. If it is a leaf, it takes the lock and calls follow_huge_pud(), which reads the entry again, but only tests whether it is present. A leaf can be zapped concurrently and a page fault can fill the empty entry with a page table. This currently only applies when device-dax makes use of PUD entries, and the fault after e.g., MADV_DONTNEED would find THPs to be disabled. That requires a sequence like 1) Fault in the PUD 2) Disable THP 3) Have GUP race against concurrent MADV_DONTNEED + refault Which is rather unlikely to happen in practice, which is why we never received a report about such a problem. Before commit 1b1676180246 ("mm/gup: handle huge pud for follow_pud_mask()"), we performed that check in follow_devmap_pud() by testing for pud_devmap(). Let's fix it by just structuring follow_pud_mask() similar to follow_pmd_mask(), minus protnone stuff that does not apply and minus FOLL_SPLIT_PMD handling. That makes it much easier to spot any such inconsistencies. Perform the pud_bad() check early in follow_pmd_mask() and just forward the PUD value. We can drop the pud_present() check in follow_huge_pud(), just like we have in follow_huge_pmd(). Even though we are performing more changes than strictly necessary, the fix should be easy to backport.

CVSS n/a EPSS n/a KEV · Not listed
Vendors
Products
CVE-2026-99663

mm/gup: fix clearing folios in memfd_pin_folios()

In the Linux kernel, the following vulnerability has been resolved: mm/gup: fix clearing folios in memfd_pin_folios() memfd_pin_folios() pins folios obtained directly from the page cache without checking whether they are uptodate. However, shmem fallocate() can leave newly allocated folios uncleared and not uptodate. Callers such as udmabuf can then expose uninitialized memory to userspace. Clear non-uptodate folios and mark them uptodate under the folio lock before returning them to the caller. Fix generated by an LLM and sent by Chris Mason in private. [ david: simplify description and comment ]

CVSS n/a EPSS n/a KEV · Not listed
Vendors
Products
CVE-2026-99662

mm/gup: fix out-of-bounds write for nr_pages == 0 in GUP-fast

In the Linux kernel, the following vulnerability has been resolved: mm/gup: fix out-of-bounds write for nr_pages == 0 in GUP-fast With nr_pages == 0, GUP-fast still enters its page table walk and can write past the caller's page array. The old end <= start check caught empty ranges, but was replaced with an overflow check. Users such as OrangeFS can pass a zero page count derived from a userspace-supplied length. So let's return zero for nr_pages == 0 before starting the walk, just like GUP-slow. Fix generated by an LLM and sent by Chris Mason in private. [ david: simplify description ]

CVSS n/a EPSS n/a KEV · Not listed
Vendors
Products