Export limit exceeded: 26191 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.

Search vulnerabilities

Results 26,191

Export CSV
CVE-2026-99318

ALSA: bcd2000: Fix use-after-free of MIDI URBs on file close

In the Linux kernel, the following vulnerability has been resolved: ALSA: bcd2000: Fix use-after-free of MIDI URBs on file close bcd2000_disconnect() calls snd_card_disconnect(), which only prevents new opens, and then frees the MIDI URBs. A rawmidi file that was already open can still be closed afterwards, and its close callback, bcd2000_midi_output_close(), calls usb_kill_urb() on midi_out_urb. The URB pointers are cleared on disconnect and their accesses are serialized with midi_lock, but bcd2000_midi_output_close() reads midi_out_urb without that lock. The check can therefore pass just before the pointer is cleared, and usb_kill_urb() then runs on the URB that has already been freed: BUG: KASAN: slab-use-after-free in usb_kill_urb+0x74/0x80 Read of size 8 at addr ffff8880078e7d40 usb_kill_urb bcd2000_midi_output_close close_substream rawmidi_release_priv snd_rawmidi_release Allocated by: usb_alloc_urb <- bcd2000_init_midi <- bcd2000_probe Freed by: usb_free_urb <- bcd2000_midi_free <- bcd2000_disconnect Take the lock in bcd2000_midi_output_close() and reference the URB with usb_get_urb() before releasing it. The URB then stays valid until usb_put_urb() after usb_kill_urb() has returned, even if a disconnect frees it in the meantime. usb_kill_urb() itself cannot run under midi_lock, as the completion handler takes the same lock.

CVSS n/a EPSS n/a KEV · Not listed
Vendors
Products
CVE-2026-99312

KVM: x86: Unconditionally reset MMU context when emulating INIT

In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Unconditionally reset MMU context when emulating INIT Force an MMU reset when emulating an INIT even if paging was already disabled, as the MMU page role includes guest_mode (L2), i.e. an INIT while L2 is running with CR0.PG=0 will result in KVM running L1 with a stale MMU context. Alternatively, the reset could be scoped strictly to paging being enabled or L2 being active, but SMM is also encoded in the page role. Even though it _should_ be impossible for the vCPU to be INIT'd while SMM is active, there's zero value in not handling SMM. At that point, the only scenario where KVM _doesn't_ need to reset the MMU context is on an INIT with the vCPU running in Real Mode or Unpaged Protect Mode, and while INIT in those modes is somewhat common, it's far from a hot path and re-initializing the MMU is not expensive, especially when the role isn't changing (KVM elides most of the re-configuration in that case). Note, like the Fixes commit, this bug only affects nested SVM as INIT is an unconditional intercept on VMX, i.e. it's impossible to emulate INIT while L2 is active. Temporarily keep the guest TLB flush when CR0.PG is being cleared even though it is fully redundant with the flush that is emitted on all INIT events (KVM itself only does RESET when a vCPU is being created, i.e. when CR0.PG must be '0').

CVSS n/a EPSS n/a KEV · Not listed
Vendors
Products
CVE-2026-99313

HID: logitech-hidpp: fix race condition when accessing stale stack pointer

In the Linux kernel, the following vulnerability has been resolved: HID: logitech-hidpp: fix race condition when accessing stale stack pointer The driver uses hidpp->send_receive_buf to point to a stack-allocated buffer in the synchronous command path (__do_hidpp_send_message_sync). However, this pointer is not cleared when the function returns. If an event is processed (e.g. by a different thread) while the send_mutex is held by a new command, but before that command has updated send_receive_buf, the handler (hidpp_raw_hidpp_event) will observe that the mutex is locked and dereference the stale pointer. This results in an out-of-bounds access on a different thread's kernel stack (or a NULL pointer dereference on the very first command). Fix this by: 1. Clearing hidpp->send_receive_buf to NULL before releasing the mutex in the synchronous command path. 2. Moving the assignment of the local 'question' and 'answer' pointers inside the mutex_is_locked() block in the handler, and adding a NULL check before dereferencing.

CVSS n/a EPSS n/a KEV · Not listed
Vendors
Products
CVE-2026-99317

ALSA: hwdep: Serialize DSP load requests

In the Linux kernel, the following vulnerability has been resolved: ALSA: hwdep: Serialize DSP load requests The check of the loaded DSP indices and the call of the driver's dsp_load callback in snd_hwdep_dsp_load() are not serialized. A hwdep file descriptor can be shared among threads, or inherited across fork, so two SNDRV_HWDEP_IOCTL_DSP_LOAD requests for the same index can both observe the index as unloaded and enter the driver's callback concurrently, even though the device itself is opened exclusively. This breaks the assumption behind hw->dsp_loaded that a firmware index is loaded only once. For example, snd-usb-usx2y hits WARN_ON(usx2y->as04.buffer) in usx2y_async_seq04_init() and may allocate the US-428 sequence URBs twice. Serialize the check, the callback invocation and the bookkeeping with a per-hwdep mutex, so that the second request returns -EBUSY.

CVSS n/a EPSS n/a KEV · Not listed
Vendors
Products
CVE-2026-99319

ALSA: usx2y: Refuse a retried DSP load after a failure

In the Linux kernel, the following vulnerability has been resolved: ALSA: usx2y: Refuse a retried DSP load after a failure snd_usx2y_hwdep_dsp_load() sets up the asynchronous sequence URBs and the interrupt URB when the FPGA firmware image with index 1 is loaded, and then creates the ALSA devices. If usx2y_in04_init() or usx2y_create_alsa_devices() fails, the URBs that were already set up are left in place. The core keeps the index unloaded when the callback fails, so user space may issue the same request again. The second attempt then enters usx2y_async_seq04_init() or usx2y_in04_init() with the URBs still allocated and trips WARN_ON(usx2y->as04.buffer) or WARN_ON(usx2y->in04_urb). The URBs cannot be released at this point: the card may already have registered PCM devices that user space can still open, and the disconnect handler accesses the URBs without holding the DSP lock. Mark the chip as hung instead, so that a retried request is refused with -ENODEV and the assertions keep their meaning. The URBs are released by snd_usx2y_card_private_free() when the card is freed. A failing usx2y_async_seq04_init() still releases its own URBs, so that path remains retryable.

CVSS n/a EPSS n/a KEV · Not listed
Vendors
Products
CVE-2026-99314

ALSA: us122l: Add missing NULL check in usb_stream_hwdep_mmap()

In the Linux kernel, the following vulnerability has been resolved: ALSA: us122l: Add missing NULL check in usb_stream_hwdep_mmap() usb_stream_hwdep_mmap() reads us122l->sk.s and dereferences it without checking for NULL. The stream object is released by usb_stream_free(), which is reached through us122l_stop() both when the device is disconnected and when us122l_start() fails, and it leaves us122l->sk.s set to NULL. The hwdep file stays usable after that, so a later mmap() KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] RIP: 0010:usb_stream_hwdep_mmap+0x107/0x890 sound/usb/usx2y/us122l.c:182 crashes while reading s->read_size, which sits at offset 0x10. That NULL is an expected state for this field: usb_stream_hwdep_vm_fault(), usb_stream_hwdep_poll(), usb_stream_hwdep_ioctl(), usb_stream_stop() and usb_stream_free() all test it before use. Only the mmap callback misses the check, so let it return -ENODEV, matching what the other hwdep mapping in usx2yhwdeppcm.c does when its shared buffer has not been allocated.

CVSS n/a EPSS n/a KEV · Not listed
Vendors
Products
CVE-2026-99315

ALSA: us122l: Fix NULL dereference at hwdep open and release

In the Linux kernel, the following vulnerability has been resolved: ALSA: us122l: Fix NULL dereference at hwdep open and release usb_stream_hwdep_open() and usb_stream_hwdep_release() pass the result of usb_ifnum_to_if() straight to usb_autopm_get_interface() and usb_autopm_put_interface(), without checking it for NULL. usb_ifnum_to_if() returns NULL once the device is gone, since usb_disable_device() clears udev->actconfig on disconnect. The hwdep file can outlive the disconnect: the card is released with snd_card_free_when_closed(), so a process that keeps the character device open reaches the driver's release callback after the USB configuration has been dropped, and interface_to_usbdev() then dereferences the NULL interface at offsetof(struct device, parent). The open callback has the same problem when it races with the disconnect. Check both lookups and fail the open with -ENODEV; in release, skip the runtime PM put when the interface is already gone and still run the rest of the per-file cleanup. Move the us122l->first bookkeeping after the checks so that a failed open no longer leaves a stale file pointer behind.

CVSS n/a EPSS n/a KEV · Not listed
Vendors
Products
CVE-2026-99316

ALSA: usx2y: Initialize idle URBs before submitting streams

In the Linux kernel, the following vulnerability has been resolved: ALSA: usx2y: Initialize idle URBs before submitting streams usb_stream_start() submits the first two capture and playback URBs and only afterwards assigns sk->idle_inurb, sk->idle_outurb, sk->completed_inurb and sk->completed_outurb to the remaining two URBs of each direction. A transfer can complete as soon as usb_submit_urb() has been called, so the completion handler i_capture_start() or i_playback_start() may run before those pointers are set. While the stream is still being synchronized (state below usb_stream_sync1), stream_start() then calls playback_prep_freqn(sk, sk->idle_outurb) with sk->idle_outurb still NULL, and the packet descriptors are written through that NULL pointer: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000018: 0000 [#1] SMP KASAN KASAN: null-ptr-deref in range [0x00000000000000c0-0x00000000000000c7] RIP: 0010:playback_prep_freqn+0x11c/0x4a0 sound/usb/usx2y/usb_stream.c:33 Call Trace: <IRQ> stream_start+0x5dc/0x8d0 sound/usb/usx2y/usb_stream.c:596 i_capture_start+0x3da/0x710 sound/usb/usx2y/usb_stream.c:654 __usb_hcd_giveback_urb+0x238/0x550 drivers/usb/core/hcd.c:1657 usb_giveback_urb_bh+0x20b/0x530 drivers/usb/core/hcd.c:1691 tasklet_hi_action+0xa/0x20 kernel/softirq.c:994 handle_softirqs+0x16f/0x440 kernel/softirq.c:645 </IRQ> The four URBs referenced by these pointers are allocated long before and do not depend on any transfer state, so assign them before the submit loop. Keeping the assignment inside the retry path also restores a well-defined URB rotation when the start frame mismatch handling kills and resubmits the streams.

CVSS n/a EPSS n/a KEV · Not listed
Vendors
Products
CVE-2026-64544

crypto: asymmetric_keys - fix OOB read in pefile_digest_pe_contents

In the Linux kernel, the following vulnerability has been resolved: crypto: asymmetric_keys - fix OOB read in pefile_digest_pe_contents pefile_digest_pe_contents() computes the trailing-data hash length as pelen - (hashed_bytes + certs_size). A crafted PE can make the addition exceed pelen, causing the unsigned subtraction to underflow to ~4 GiB. This is passed to crypto_shash_update() which reads out of bounds and panics on unmapped vmalloc guard pages. BUG: unable to handle page fault for address: ffffc900038d8000 Oops: Oops: 0000 [#1] SMP KASAN NOPTI RIP: 0010:sha256_blocks_generic (lib/crypto/sha256.c:152) Call Trace: <TASK> __sha256_update (lib/crypto/sha256.c:208) crypto_sha256_update (crypto/sha256.c:142) verify_pefile_signature (crypto/asymmetric_keys/verify_pefile.c:436) kexec_kernel_verify_pe_sig (kernel/kexec_file.c:151) __do_sys_kexec_file_load (kernel/kexec_file.c:406) do_syscall_64 (arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) </TASK> Kernel panic - not syncing: Fatal exception Validate that the addition does not overflow and the result does not exceed pelen before the subtraction. Return -ELIBBAD on failure.

CVSS 3.1 · 7.1 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-64553

net: psample: fix info leak in PSAMPLE_ATTR_DATA

In the Linux kernel, the following vulnerability has been resolved: net: psample: fix info leak in PSAMPLE_ATTR_DATA psample open codes nla_put() presumably to avoid wiping the data with 0s just to override it with packet data. This open coding is missing clearing the pad, however, each netlink attr is padded to 4B and data_len may not be divisible by 4B.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-98077

netfilter: nf_conntrack_sip: fix OOB read in sip_skip_whitespace()

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack_sip: fix OOB read in sip_skip_whitespace() sip_skip_whitespace() returns dptr unchanged when its own loop exhausts the buffer (dptr == limit), instead of NULL like its sibling sip_follow_continuation() returns on its own "no more data" path. ct_sip_get_header() only checks for NULL after calling it: dptr = sip_skip_whitespace(dptr, limit); if (dptr == NULL) break; if (*dptr != ':' || ++dptr >= limit) break; so a recognized header name followed only by spaces/tabs running to the exact end of the SIP payload, with no colon, makes the very next statement read one byte past the buffer. Make both "no more data" outcomes return NULL, matching the convention sip_follow_continuation() already uses and that both existing callers already check for.

CVSS 3.1 · 7.1 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-98079

btrfs: zstd: fix lost wakeup when waiting for a workspace

In the Linux kernel, the following vulnerability has been resolved: btrfs: zstd: fix lost wakeup when waiting for a workspace A writer can sleep forever in zstd_get_workspace() even though a workspace is free. When zstd_alloc_workspace() fails, the task is queued on zwsm->wait and schedules unconditionally, never re-testing the pool. zstd_put_workspace() publishes the workspace and then calls cond_wake_up(), which only wakes when a sleeper is already visible, so a workspace returned between the failed allocation and prepare_to_wait() wakes nobody. The window is wide: zstd_alloc_workspace() goes through kvmalloc() and may enter reclaim. Only a max level workspace triggers the wakeup and one is deliberately kept allocated as the fallback every waiter waits for, so once its wakeup is lost the writer stays in TASK_UNINTERRUPTIBLE until some other task happens to return one. Re-check the pool after prepare_to_wait() has published the waiter, and use the workspace if one turned up.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-98081

btrfs: zoned: finish active block group cleanup if call_zone_finish() fails

In the Linux kernel, the following vulnerability has been resolved: btrfs: zoned: finish active block group cleanup if call_zone_finish() fails do_zone_finish() clears BLOCK_GROUP_FLAG_ZONE_IS_ACTIVE before finishing the zones. If call_zone_finish() then fails it returned early, leaving the now inactive block group on fs_info->zone_active_bgs, leaking its reference, the BTRFS_FS_NEED_ZONE_FINISH waiters are never woken, and as its alloc_offset equals the zone capacity btrfs_zone_finish_one_bg() keeps selecting it, spinning btrfs_zoned_activate_one_bg(). Fall through to the cleanup on failure too and return the error, but keep the block group read-only as its zones are left inconsistent.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-98084

bpf: backtracking shouldn't clear outer frame R1-R5 for callbacks

In the Linux kernel, the following vulnerability has been resolved: bpf: backtracking shouldn't clear outer frame R1-R5 for callbacks When processing calls to bpf_loop() verifier marks R1 (and R4) as precise. R1 tracks loop iterations number and because of the 'callback_depth < R1' mechanics in check_helper_call() must be marked precise. However, precision propagation for R1 was broken, when bpf_loop() call was verified on a second iteration. Consider the following verification trace: - main: bpf_loop(nr_loops, callback ...) - callback: BPF_EXIT - main: bpf_loop(nr_loops, callback ...) - ... While the first visit of the call to bpf_loop() propagated R1 precision as expected, the second call to mark_chain_precision() in the check_helper_call() set R1, but it was immediately reset when backtrack_insn() processed preceding BPF_EXIT in the loop deleted in this patch. Because of that, the second visit of the call to bpf_loop() injected checkpoint with R1 not marked as precise. Which could trick the verifier into accepting unsafe programs. See the next patch for an example of such program. Commit is structured in a way to minimize conflicts when 'bpf' would be eventually merged with 'bpf-next'.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-98085

bpf: backtrack_insn(): Handle ld_{abs,ind} subprog exit edge

In the Linux kernel, the following vulnerability has been resolved: bpf: backtrack_insn(): Handle ld_{abs,ind} subprog exit edge Nicholas Carlini reported a bug in precision backtracking mechanism for BPF_LD | BPF_{IND,ABS} instructions. These instructions are modelled as two branches: - fallthrough; - implicit exit from current subprogram. The implicit exit case was not handled by the backtrack_insn() function. When backtracking such a path backtrack_insn() did not call bt_subprog_enter(), which meant that backtracking continued manipulating precision marks in a caller frame, while looking at instructions in a callee frame. This lead to segmentation faults during verification (see the selftest), or unsound state pruning.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-98086

ALSA: ump: do not touch legacy_rmidi before it exists

In the Linux kernel, the following vulnerability has been resolved: ALSA: ump: do not touch legacy_rmidi before it exists snd_ump_parse_endpoint() sets ump->parsed on every exit, including error, before the caller attaches the legacy rawmidi device. ump_handle_ep_name_msg() then treats parsed as "legacy_rmidi is live" and calls ump_legacy_set_rawmidi_name(), which snprintf()s into ump->legacy_rmidi->name. If a UMP packet arrives in that window (IRQ path from snd_ump_receive), legacy_rmidi is still NULL (KASAN null-ptr-deref in snprintf). Guard the legacy helpers. parsed only means endpoint info was parsed, not that legacy_rmidi exists.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-98087

sched/rt,dl: Skip migrate-disabled tasks when picking a push candidate

In the Linux kernel, the following vulnerability has been resolved: sched/rt,dl: Skip migrate-disabled tasks when picking a push candidate A migrate_disable()'d RT task cannot be moved to another CPU, but the scheduler still keeps such a task on that CPU's pushable list (rq->rt.pushable_tasks) and still marks the runqueue RT-overloaded (rq->rt.overloaded = 1). So the RT balancer keeps treating this CPU as having a task to move away, and keeps trying to move the task, but the push can never succeed. When the head is pinned, push_rt_task() does not give up either. It falls back to pushing rq->curr instead, using the per-CPU stopper, as added by commit a7c81556ec4d ("sched: Fix migrate_disable() vs rt/dl balancing"). The CPU spends tens of milliseconds in this retry loop. The core is isolated for real-time work, but during the loop nearly half of its time is consumed by pushes that cannot succeed. An ftrace capture of the affected CPU, with sched_switch enabled and commit 94894c9c477e ("sched/rt: Skip currently executing CPU in rto_next_cpu()") applied, shows where the CPU time went. Two SCHED_FIFO tasks at equal priority shared the CPU, taskA migrate_disable()'d and queued, taskB as rq->curr. In one 89 ms window, taskB got only 52 ms of CPU. The other 37 ms went to the stopper thread. The scheduler kept trying to push taskA, the pinned head of the pushable list, fell back to pushing taskB instead, and woke the stopper 5204 times. Every one of those pushes failed and no task was moved. taskA stayed runnable and queued the whole time, and never ran. Pushing taskB fails on a re-check. find_lock_lowest_rq() drops the rq lock to take the target rq lock, then checks again with "task != pick_next_pushable_task(rq)". The task being pushed is taskB, but the pick returns taskA, the head of the pushable list. taskB is rq->curr, and set_next_task_rt() removes the running task from that list, so taskB can never be the head. The check expects a candidate taken from the pushable list, but the fallback pushes rq->curr, which is never on that list. So the check fails every time. .--> push-IPI arrives | | | v | pushable head = taskA -> pinned, cannot be pushed | | | v | so push taskB instead -> wake migration/N, a stop-class | | thread, so it preempts taskB | v | re-check compares taskB against the pushable head, | which is still taskA -> give up | | | v | nothing moved, taskA still queued, rq still overloaded | | '----------' repeats every ~17 us, 5204 times, for 89 ms The loop cannot stop itself. Every round leaves the runqueue exactly as it was, so the next push-IPI does the same thing. In the capture it ended only when taskB went to sleep on its own. taskA was then picked locally and left the pushable list. CPU time per task in the window, from sched_switch: taskB 51.95 ms real work migration/N 37.18 ms nothing moved taskA 0.00 ms queued the whole time, never picked idle 0.01 ms Counts over the same window: 7667 push-IPIs handled on this CPU 17481 pick_next_pushable_task() returned taskA, still pinned 5204 find_lock_lowest_rq() gave up on the re-check 1 push that actually completed 0 migrations of taskA The CPU times and the window length come from the standard sched_switch tracepoint. The counts needed tracepoints added inside the RT balancer for this investigation. The self-IPI path is closed by the rto_next_cpu() fix above, and that part works. But the runqueue is still marked overloaded, because the pinned task is still advertised as pushable. Other CPUs now send the push-IPIs during their own RT balancing, and the same loop runs again. Closing the self-IPI path did not stop a pinn ---truncated---

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-98088

scsi: mpt3sas: Avoid out-of-bounds cpumask_of_node() call in _base_assign_reply_queues()

In the Linux kernel, the following vulnerability has been resolved: scsi: mpt3sas: Avoid out-of-bounds cpumask_of_node() call in _base_assign_reply_queues() dev_to_node() can return NUMA_NO_NODE (-1) on systems without NUMA topology information for the PCI device, such as single-socket boards that don't expose device-to-node affinity. Passing -1 directly into cpumask_of_node() indexes node_to_cpumask_map[-1], an out-of-bounds array read caught by UBSAN: UBSAN: array-index-out-of-bounds in arch/x86/include/asm/topology.h:72:28 index -1 is out of range for type 'cpumask *[1024]' Fall back to cpu_online_mask when no NUMA node is available, rather than assuming dev_to_node() always returns a valid node index.

CVSS 3.1 · 7.1 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-98101

ipv6: mcast: use copy-on-write RCU updates in ip6_mc_source()

In the Linux kernel, the following vulnerability has been resolved: ipv6: mcast: use copy-on-write RCU updates in ip6_mc_source() pmc->sflist is read locklessly under rcu_read_lock() by inet6_mc_check() during packet reception in the UDP and RAW multicast receive paths. ip6_mc_source() mutated psl->sl_addr and psl->sl_count in-place when adding or removing a source filter. Additionally, when expanding the filter buffer, newpsl was published via rcu_assign_pointer() before writing the new source into the array. Because 16-byte struct in6_addr writes are not atomic and array shifting is not synchronized with RCU readers, concurrent readers in inet6_mc_check() could read torn IPv6 addresses or observe duplicated/missed source entries. Fix this by switching ip6_mc_source() to copy-on-write RCU updates: allocate and fully populate newpsl before publishing it via rcu_assign_pointer(), and reclaim the old filter via kfree_rcu(), matching ip6_mc_msfilter(). Also remove the now unused IP6_SFBLOCK macro.

CVSS 3.1 · 4.7 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-98102

ipv6: mcast: fix RCU list diversion in ip6_mc_del1_src()

In the Linux kernel, the following vulnerability has been resolved: ipv6: mcast: fix RCU list diversion in ip6_mc_del1_src() When removing a source filter whose count reaches zero, ip6_mc_del1_src() unlinks psf from pmc->mca_sources. If the filter was previously active, the code moved psf directly into pmc->mca_tomb by updating psf->sf_next. Because pmc->mca_sources is traversed locklessly under RCU (e.g. by ipv6_chk_mcast_addr()), mutating psf->sf_next before a grace period elapses diverts concurrent readers to the tombstone list. Consequently, readers miss remaining active sources in pmc->mca_sources and improperly examine deleted tombstone entries. Fix this by allocating a new tombstone node for pmc->mca_tomb (as done in sf_setstate()) and retiring the original psf via kfree_rcu().

CVSS 3.1 · 4.7 Medium EPSS < 1% KEV · Not listed
Vendors
Products