Search vulnerabilities

Results 1,388

Export CSV
CVE-2026-131874

Gargoyle 2023.1 through 2026.1.1 Plus Interpreter Infinite Loop via ReadString()

Gargoyle 2023.1 through 2026.1.1 contains an infinite loop vulnerability in the bundled Plus interpreter's ReadString() function in terps/plus/loaddatabase.c that fails to handle end of file. Attackers can supply an empty, truncated, or crafted .plus game file that hangs Gargoyle at full CPU until the user kills it.

CVSS 4.0 · 6.8 Medium EPSS n/a KEV · Not listed
Vendors
—
Products
—
CVE-2026-98087

sched/rt,dl: Skip migrate-disabled tasks when picking a push candidate

In the Linux kernel, the following vulnerability has been resolved: sched/rt,dl: Skip migrate-disabled tasks when picking a push candidate A migrate_disable()'d RT task cannot be moved to another CPU, but the scheduler still keeps such a task on that CPU's pushable list (rq->rt.pushable_tasks) and still marks the runqueue RT-overloaded (rq->rt.overloaded = 1). So the RT balancer keeps treating this CPU as having a task to move away, and keeps trying to move the task, but the push can never succeed. When the head is pinned, push_rt_task() does not give up either. It falls back to pushing rq->curr instead, using the per-CPU stopper, as added by commit a7c81556ec4d ("sched: Fix migrate_disable() vs rt/dl balancing"). The CPU spends tens of milliseconds in this retry loop. The core is isolated for real-time work, but during the loop nearly half of its time is consumed by pushes that cannot succeed. An ftrace capture of the affected CPU, with sched_switch enabled and commit 94894c9c477e ("sched/rt: Skip currently executing CPU in rto_next_cpu()") applied, shows where the CPU time went. Two SCHED_FIFO tasks at equal priority shared the CPU, taskA migrate_disable()'d and queued, taskB as rq->curr. In one 89 ms window, taskB got only 52 ms of CPU. The other 37 ms went to the stopper thread. The scheduler kept trying to push taskA, the pinned head of the pushable list, fell back to pushing taskB instead, and woke the stopper 5204 times. Every one of those pushes failed and no task was moved. taskA stayed runnable and queued the whole time, and never ran. Pushing taskB fails on a re-check. find_lock_lowest_rq() drops the rq lock to take the target rq lock, then checks again with "task != pick_next_pushable_task(rq)". The task being pushed is taskB, but the pick returns taskA, the head of the pushable list. taskB is rq->curr, and set_next_task_rt() removes the running task from that list, so taskB can never be the head. The check expects a candidate taken from the pushable list, but the fallback pushes rq->curr, which is never on that list. So the check fails every time. .--> push-IPI arrives | | | v | pushable head = taskA -> pinned, cannot be pushed | | | v | so push taskB instead -> wake migration/N, a stop-class | | thread, so it preempts taskB | v | re-check compares taskB against the pushable head, | which is still taskA -> give up | | | v | nothing moved, taskA still queued, rq still overloaded | | '----------' repeats every ~17 us, 5204 times, for 89 ms The loop cannot stop itself. Every round leaves the runqueue exactly as it was, so the next push-IPI does the same thing. In the capture it ended only when taskB went to sleep on its own. taskA was then picked locally and left the pushable list. CPU time per task in the window, from sched_switch: taskB 51.95 ms real work migration/N 37.18 ms nothing moved taskA 0.00 ms queued the whole time, never picked idle 0.01 ms Counts over the same window: 7667 push-IPIs handled on this CPU 17481 pick_next_pushable_task() returned taskA, still pinned 5204 find_lock_lowest_rq() gave up on the re-check 1 push that actually completed 0 migrations of taskA The CPU times and the window length come from the standard sched_switch tracepoint. The counts needed tracepoints added inside the RT balancer for this investigation. The self-IPI path is closed by the rto_next_cpu() fix above, and that part works. But the runqueue is still marked overloaded, because the pinned task is still advertised as pushable. Other CPUs now send the push-IPIs during their own RT balancing, and the same loop runs again. Closing the self-IPI path did not stop a pinn ---truncated---

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-64519

NFSD: Fix infinite loop in layout state revocation

In the Linux kernel, the following vulnerability has been resolved: NFSD: Fix infinite loop in layout state revocation find_one_sb_stid() skips stids whose sc_status is non-zero, but the SC_TYPE_LAYOUT case in nfsd4_revoke_states() never sets sc_status before calling nfsd4_close_layout(). The retry loop therefore finds the same layout stid on every iteration, hanging the revoker indefinitely.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-64537

bridge: cfm: reject invalid CCM interval at configuration time

In the Linux kernel, the following vulnerability has been resolved: bridge: cfm: reject invalid CCM interval at configuration time ccm_tx_work_expired() re-arms itself via queue_delayed_work() using the configured exp_interval converted by interval_to_us(). When exp_interval is BR_CFM_CCM_INTERVAL_NONE or out of range, interval_to_us() returns 0, causing the worker to fire immediately in a tight loop that allocates skbs until OOM. Fix this by validating exp_interval at configuration time: - Constrain IFLA_BRIDGE_CFM_CC_CONFIG_EXP_INTERVAL to the valid range [BR_CFM_CCM_INTERVAL_3_3_MS, BR_CFM_CCM_INTERVAL_10_MIN] in the netlink policy so userspace cannot set an invalid value. - Reject starting CCM TX in br_cfm_cc_ccm_tx() when exp_interval has not yet been configured (defaults to 0 from kzalloc).

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-122096

Apache DataSketches Java: Uncontrolled resource consumption when deserializing crafted sketch images

Uncontrolled Resource Consumption vulnerability in the sketch deserialization of Apache DataSketches Java. Several deserializers trusted sizes and counts declared in the serialized input. A small crafted input could make an application allocate an excessive amount of memory, leading to an OutOfMemoryError. A crafted string passed to FrequentLongsSketch.getInstance(String) could also make deserialization, or a later update, loop indefinitely. Only applications that deserialize sketches from untrusted sources are affected. This issue affects Apache DataSketches Java: through 9.0.0. Users are recommended to upgrade to version 9.1.0, which fixes the issue.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed
CVE-2026-125275

A device certificate whose CA isn't registered can keep a TLS handshake running forever

Loop with Unreachable Exit Condition ('Infinite Loop') vulnerability in device certificate verification in nerves-hub nerves_hub_web allows an unauthenticated remote attacker to cause a denial of service via a TLS client certificate whose CA is not registered. When a client certificate chains to a root in the device endpoint's trust store but no CA in the chain is registered in NervesHub, NervesHub.SSL.decide/2 refuses it with the reason :unknown_ca. Erlang/OTP ssl reads that reason as a missing trust anchor, looks for an alternative root, finds the same root and validates again without end. The handshake process queries the database on each pass and keeps running after the client disconnects, until the node restarts. The device endpoint trusts the public roots from CAStore unless DEVICE_SSL_CACERTFILE is set, so a client certificate from a public CA whose chain allows client authentication is sufficient. A chain that ends at a root outside the trust store is refused once. This issue affects nerves_hub: from 1.0.0 before 2.5.4.

CVSS 4.0 · 8.2 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-103645

Integer overflow vulnerability in QTextCodec fromUnicode() and toUnicode() impacts Qt

An integer overflow vulnerability in the Qt QTextCodec fromUnicode() and toUnicode() functionality of the Qt 5 Core Compatibility APIs module (Qt 6) and the Qt Core module (Qt 5). Only builds where Qt is compiled with ICU support are affected.

CVSS 4.0 · 1.1 Low EPSS < 1% KEV · Not listed
Vendors
Qt
Products
CVE-2026-107496

Infinite Loop in CMS_encrypt() With an EC Group Order of 1

Issue summary: Encrypting a CMS message to an EC certificate whose group order is 1 may cause CMS_encrypt() or CMS_encrypt_ex() to loop indefinitely. Impact summary: An attacker able to supply the recipient certificate to an application performing CMS encryption can cause that application to loop indefinitely, consuming CPU and resulting in Denial of Service. CWE: CWE-835: Loop with Unreachable Exit Condition ('Infinite Loop') Description: CMS_encrypt() and CMS_encrypt_ex() encrypt a message to one or more recipient certificates and, for an EC recipient, generate an ephemeral key in the recipient's group. If the certificate declares a group order of 1, random scalar generation can only produce zero. The key generation routine then retries without limit while waiting for a nonzero private scalar, so the call never returns. The OpenSSL TLS and QUIC implementations do not use this path. An application is exposed only if it calls CMS_encrypt() or CMS_encrypt_ex() with a recipient certificate whose EC parameters are attacker-controlled. Certificates with normal EC group orders do not trigger the loop. OpenSSL 4.0 and later reject unknown explicit EC groups in default builds. These versions are affected only when configured with the enable-ec_explicit_curves option. The result is a hang that consumes a CPU core until the process is interrupted, a Denial of Service. The severity is Low because the attacker must supply the recipient certificate and the application must choose to encrypt to it; ordinary CMS encryption to trusted recipients is unaffected. The fix makes EC key generation fail when the group has no valid nonzero private scalar, instead of retrying indefinitely. FIPS impact: no The FIPS modules in 4.1, 4.0, 3.5 and 3.0 are not affected. The FIPS provider does not support arbitrary explicit EC domain parameters, so an order-1 group is rejected during key import before the vulnerable key generation path is reached.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-55709

Infinite Loop in Intel TDX Migration Trust Domain Causes Denial of Service

Loop with unreachable exit condition ('infinite loop') in the MigTD's GetQuote for the Intel(R) TDX Migration Trust Domain (MigTD) within Ring 0: Hypervisor may allow a denial of service. System software adversary with an unauthenticated user combined with a low complexity attack may enable denial of service. This result may potentially occur via local access when attack requirements are not present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (none), integrity (none) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts.

CVSS 4.0 · 6.9 Medium EPSS < 1% KEV · Not listed
Vendors
—
Products
—
CVE-2026-128987

Dbus: infinite cpu-spin loop in libdbus socket transport when epipe is received during write operations

A flaw was found in dbus. A local attacker can exploit this vulnerability by connecting to an affected service, requesting a response, and stopping socket reads while keeping the connection open. Because the socket transport handles broken pipe write errors as retryable, the application enters a continuous retry loop. This can lead to excessive CPU consumption, resulting in a denial of service (DoS) for the target process.

CVSS 3.1 · 6.2 Medium EPSS < 1% KEV · Not listed
Vendors
CVE-2026-97402

BLE Advertising Payload Infinite Loop Causes CPU Exhaustion

In Eclipse Kura versions 3.1.0 to 5.6.2, the iBeacon and Eddystone advertisement decoders wrongly parse the AD-structure length field of an over-the-air BLE advertising payload. Any unauthenticated attacker within BLE radio range can broadcast a two-byte advertising payload that drives the Kura beacon-scanner thread into a tight infinite loop, pinning a CPU core and permanently halting beacon ingestion until the gateway is restarted. To trigger the attack, the iBeacon/Eddystone scanner component should be installed and active. By default the components are not installed or enabled.

CVSS 4.0 · 2.3 Low EPSS < 1% KEV · Not listed
Vendors
—
Products
—
CVE-2026-121809

CPU exhaustion via a truncated gRPC message on streaming RPCs in elixir-grpc grpc_server

Loop with Unreachable Exit Condition ('Infinite Loop') vulnerability in elixir-grpc grpc_server and grpc allows unauthenticated attackers to occupy a BEAM scheduler indefinitely via a client-streaming or bidirectional-streaming request whose body ends inside a gRPC message. GRPC.Server.Adapters.Cowboy.read_stream/1 (grpc_server/lib/grpc/server/adapters/cowboy.ex, and the Cowboy adapter in grpc before the package split) asks for more data whenever the buffer does not hold a complete message. Once the request body has ended, every further read returns an empty chunk, so the buffer never changes and the function retries without end. A single 5-byte length prefix sent with END_STREAM keeps one scheduler busy for as long as the connection stays open, and repeated requests exhaust all schedulers. This issue affects grpc_server: from 1.0.0 before 1.1.0; grpc: from 0.3.1 before 1.0.0.

CVSS 4.0 · 8.2 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-52789

BACnet Stack: Denial of Service (Infinite Loop) in handler_read_property_multiple via malformed RPM requests

BACnet Stack is a BACnet open source protocol stack C library for embedded systems. Prior to versions 1.4.5, 1.5.1, and 1.6.0, a Denial of Service (DoS) vulnerability exists in the BACnet stack's ReadPropertyMultiple (RPM) handler. When processing a malformed RPM request packet that lacks the expected closing tags, the function handler_read_property_multiple enters an infinite loop. This issue has been patched in versions 1.4.5, 1.5.1, and 1.6.0.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-62974

BACnet Stack: Remote unauthenticated DoS in `Life_Safety_Zone` `PROP_ZONE_MEMBERS` WriteProperty parsing

BACnet Stack is a BACnet open source protocol stack C library for embedded systems. Prior to versions 1.4.5, 1.5.1, and 1.6.0, a malformed but non-empty BACnet WriteProperty request can drive the official server demo into a non-terminating request-processing loop with repeated heap-backed side effects. This results in a remote unauthenticated denial of service via uncontrolled resource consumption and a non-terminating request path. This issue has been patched in versions 1.4.5, 1.5.1, and 1.6.0.

CVSS 4.0 · 8.7 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-128130

AIOHTTP: Pure-Python parser request replay and buffer growth behind a declined upgrade

AIOHTTP is an asynchronous HTTP client/server framework for asyncio and Python. Prior to 3.14.4, when the pipelined request queue is full, the pure-Python parser stores the unparsed remainder internally and also returns the same data to its caller. After a handler declines an upgrade request, the caller feeds the remainder back to the parser, causing the buffer to grow with each handled request and dispatching already-handled requests to the application again. The issue affects deployments using AIOHTTP_NO_EXTENSIONS or otherwise running without the standard C-extension wheel, and can cause excessive memory use and repeated request processing. This issue is fixed in version 3.14.4.

CVSS 4.0 · 8.3 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-126237

A loop with unreachable exit condition ('infinite loop') vulnerability in Fortinet FortiAuthenticator 8.0.0 through 8.0.3, FortiAuthenticator 6.6.0 through 6.6.10 may allow an attacker to cause a denial of service via crafted TCP requests.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed
Vendors
CVE-2026-123607

Hickory DNS NSEC3 Closest-Encloser Proof Unbounded Loop Denial of Service

Hickory DNS hickory-proto 0.25.0-alpha.3 through 0.25.2 and hickory-net before 0.26.1 contain an unbounded loop vulnerability in DnssecDnsHandle NSEC3 closest-encloser proof validation when the SOA owner is not an ancestor of the QNAME. Upstream attackers can return NoData or NXDomain responses with a cross-zone SOA record to panic debug builds or exhaust memory in release builds.

CVSS 4.0 · 8.7 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-63890

scsi: fcoe: Reject FIP descriptors with zero fip_dlen in CVL walker

In the Linux kernel, the following vulnerability has been resolved: scsi: fcoe: Reject FIP descriptors with zero fip_dlen in CVL walker drivers/scsi/fcoe/fcoe_ctlr.c::fcoe_ctlr_recv_clr_vlink() advanced the descriptor cursor by an attacker-supplied fip_dlen without ever requiring dlen >= sizeof(struct fip_desc) in the default branch. The named descriptor cases (FIP_DT_MAC, FIP_DT_NAME, FIP_DT_VN_ID) checked their per-type minimum lengths, but a FIP_DT_NON_CRITICAL descriptor (fip_dtype >= 128, which the standard requires receivers to silently ignore) skipped that check entirely. An unauthenticated L2 peer on the FCoE control VLAN could hang fcoe_ctlr_recv_work on an fcoe, qedf, or bnx2fc initiator indefinitely by emitting one FIP CVL frame whose single descriptor had fip_dtype == FIP_DT_NON_CRITICAL and fip_dlen == 0: the cursor advanced zero bytes per iteration and the loop condition rlen >= sizeof(*desc) stayed true forever, blocking every subsequent FIP frame on that controller. Tighten the outer dlen guard to also reject dlen < sizeof(struct fip_desc), so a malformed descriptor whose length cannot even cover the descriptor header is rejected before the switch. This is the same lower-bound the named cases already apply and is the minimum scope that closes the loop.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-98106

drm/pagemap: Prevent double migration of device pages

In the Linux kernel, the following vulnerability has been resolved: drm/pagemap: Prevent double migration of device pages A device-private folio migrated to system memory by a CPU fault can remain reachable through the raw-PFN eviction path until migration finalization drops the source reference. If eviction selects the same device-private folio during this window, it can attempt to migrate the folio again. The second migration can leave an uncharged folio on an LRU list, causing folio_lruvec_lock_irqsave() to retry indefinitely and resulting in a soft lockup and RCU stall. Mark successfully migrated device-private folios using a low bit of their zone_device_data before migration finalization. Make both CPU-fault and raw-PFN migration paths skip device-private folios carrying this flag. Mask the flag when retrieving the drm_pagemap_zdd pointer and preserve it when a device-private folio is split. Keeping the state on the physical folio also avoids depending on a virtual address that may change before a fault occurs. v2: - Replace the retired-PFN XArray with an embedded bitmap. (Matthew Brost) - Mark every base page covered by a migrated folio so retirement remains valid if the folio is later split. v3: - Store the migrated state in a low bit of zone_device_data instead of adding virtual-range and bitmap tracking to the ZDD. (Matthew Brost) - Mask the flag when retrieving the ZDD and preserve it when splitting a folio. - Drop the pre-existing fixes already covered by Matthew Brost's series: https://patchwork.freedesktop.org/series/171651/ v4: - Advance by the folio size only for migration entries marked with MIGRATE_PFN_COMPOUND. (Sashiko) v5: - Simplify ZDD flag updates and folio iteration. (Matthew Brost) - Skip retired device-private folios in the CPU-fault path. (Matthew Brost) - Preserve flag bits while taking a new ZDD reference for split folios. v6: - Restore MIGRATE_PFN_COMPOUND-aware stepping so non-compound migration entries are processed one at a time. (Sashiko) - Drop the pre-existing fixes already covered by Matthew Brost's series: https://patchwork.freedesktop.org/series/171651/ The lockup was observed as: [10109.860465] watchdog: BUG: soft lockup - CPU#9 stuck for 26s! [kworker/u65:5:6557] [10109.860524] Tainted: [S]=CPU_OUT_OF_SPEC, [O]=OOT_MODULE [10109.860524] Hardware name: ASUS System Product Name/PRIME Z790-P WIFI, BIOS 0812 02/24/2023 [10109.860525] Workqueue: xe_page_fault_work_queue xe_pagefault_queue_work [xe] [10109.860644] RIP: 0010:_raw_spin_unlock_irqrestore+0x57/0x80 [10109.860655] Call Trace: [10109.860655] <TASK> [10109.860657] folio_lruvec_lock_irqsave+0x216/0x220 [10109.860661] ? __pfx_lru_add+0x10/0x10 [10109.860665] folio_batch_move_lru+0xc8/0x450 [10109.860670] ? lock_acquire+0xc4/0x2d0 [10109.860674] ? __folio_batch_add_and_move+0x60/0x2e0 [10109.860677] ? folio_migrate_mapping+0xa6/0x110 [10109.860679] ? folio_migrate_flags+0x13b/0x1b0 [10109.860681] ? __pfx_lru_add+0x10/0x10 [10109.860683] __folio_batch_add_and_move+0xe7/0x2e0 [10109.860685] ? dma_iova_try_alloc+0xb0/0x140 [10109.860689] folio_add_lru+0x64/0x80 [10109.860691] __migrate_device_finalize+0x12c/0x270 [10109.860695] migrate_device_finalize+0x10/0x20 [10109.860698] drm_pagemap_evict_to_ram+0x185/0x370 [drm_gpusvm_helper] [10109.860704] ? drm_pagemap_evict_to_ram+0x96/0x370 [drm_gpusvm_helper] [10109.860709] xe_svm_bo_evict+0x15/0x20 [xe] [10109.860819] ? xe_svm_bo_evict+0x15/0x20 [xe] [10109.860921] xe_bo_move+0x107e/0x1570 [xe] [10109.860992] ? xe_ttm_tt_create+0x168/0x340 [xe] [10109.861059] ? __up_read+0x98/0x2b0 [10109.861061] ? lock_is_held_type+0xa3/0x130 [10109.861067] ttm_bo_handle_move_mem+0xe8/0x1e0 [ttm] [10109.861075] ttm_bo_evict+0x141/0x1c0 [ttm] [10109.861081] ttm_bo_evict_cb+0x9f/0x100 [ttm] [10109.861086] ttm_lru_walk_for_evict+0x84/0x190 [ttm] [10109.861091] ? xe_ttm_vram_mgr_new+0x258/0x3a0 [xe] [10109.861198] ttm_bo_alloc_resource+0x219/0 ---truncated---

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products