Search vulnerabilities

Results 827

Export CSV
CVE-2026-17097

Power System Improper Validation

IBM PowerVM Hypervisor FW1120.00, FW1110.00 through FW1110.30, FW1060.00 through FW1060.80, and FW950.00 through FW950.H2 is affected by a vulnerability in the PowerVM hypervisor call interface. An attacker with root access to a guest partition can issue a specially crafted hypervisor call causing a virtual processor to become permanently unresponsive, requiring a full platform re-IPL to restore normal operation. In some cases this may also cause the guest to inject a small amount of data into hypervisor or partition memory with no attacker control over the target location. Successful exploitation results in an integrity and availability impact to the managed system.

CVSS 3.1 · 7.3 High EPSS < 1% KEV · Not listed
Vendors
Ibm
CVE-2026-13212

Zephyr virtio driver calls an arbitrary function pointer from an out-of-range used-ring descriptor id

The Zephyr virtio driver does not validate the descriptor-chain head id that the virtio device writes into the used ring. In virtio_isr() (drivers/virtio/virtio_common.c), the device-written vq->used->ring[idx].id is used directly as an index into vq->recv_cbs[] and vq->desc[], which are both allocated with exactly vq->num entries. recv_cbs[] holds {cb, opaque} callback entries, and the indexed callback pointer is then invoked as cbe.cb(cbe.opaque, used_len). Because the id is consumed as a 16-bit value with no bound check, a malicious or compromised virtio backend (an untrusted hypervisor, or an untrusted hardware/peer-processor virtio device on a PCI or MMIO transport) can supply an id far beyond vq->num. This causes an out-of-bounds read of a {function pointer, argument} pair from heap memory beyond recv_cbs[], after which the driver calls that attacker-shaped pointer in the guest's interrupt context. No guest privileges or user interaction are required; the backend triggers it by writing the shared used ring and raising the queue interrupt. The result is an arbitrary / attacker-influenced function-pointer call in the Zephyr guest, i.e. a control-flow-hijack primitive that can lead to code execution or, at minimum, a reliable crash. The fix rejects any used-ring id >= vq->num before indexing recv_cbs[]/desc[] or invoking the callback. This affects builds using CONFIG_VIRTIO with the PCI or MMIO transport.

CVSS 3.1 · 8.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-16849

Vulnerabilities in IBM AIX and PowerVM VIOS

IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 could allow a remote attacker to cause a denial of service due to an improper check for an array index boundary.

CVSS 3.1 · 4.3 Medium EPSS < 1% KEV · Not listed
Vendors
Ibm
Products
CVE-2026-65832

Deskflow - Unauthenticated server-controlled out-of-bounds read in ServerProxy::setOptions / translateKey modifier-table indexing

Deskflow is a keyboard and mouse sharing app. Prior to continuous build 1.26.0.299, a remote unauthenticated Deskflow server can send kMsgDSetOptions (DSOP) values to ServerProxy::setOptions() in src/lib/client/ServerProxy.cpp so that the value following a modifier option poisons m_modifierTranslationTable, after which ServerProxy::translateKey() or ServerProxy::translateModifierMask() indexes the seven-row s_translationTable or s_masks arrays out of bounds, disclosing four bytes at an attacker-selected relative offset or crashing the connected client; an odd option count also causes an out-of-bounds OptionsList read. This issue is fixed in continuous build 1.26.0.299.

CVSS 3.1 · 8.2 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-73489

Russh: Post-auth remote panic via pty-req with more than 130 terminal-mode records

Russh is a Rust SSH client & server library. Prior to 0.62.4, an authenticated SSH client can cause a denial of service by sending a pty-req channel request with more than 130 terminal-mode records. The parser in russh/src/server/encrypted.rs stores terminal modes in a fixed 130-entry [(Pty::TTY_OP_END, 0); 130] array but continues increasing the mode count, then constructs an out-of-bounds slice and panics before the application pty_request handler runs. The panic terminates the server session task without causing memory corruption. This issue is fixed in version 0.62.4.

CVSS 3.1 · 4.3 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-49282

Capstone M68K and RISCV `cs_insn_name()` invalid IDs can trigger out-of-bounds reads and process crashes

Capstone is a disassembly framework. Prior to version 6.0.0-Alpha9, Capstone's public `cs_insn_name()` API forwards caller-supplied instruction IDs directly to the selected architecture backend. Most backends validate the ID before indexing instruction-name tables, but the M68K and RISCV backends have missing or incomplete bounds checks. On a Capstone handle opened for M68K or RISCV, a caller-controlled invalid instruction ID can trigger an out-of-bounds read and crash the process. The demonstrated impact is availability loss in applications or bindings that expose instruction-name lookup to untrusted IDs. No code execution or data disclosure was demonstrated. Version 6.0.0-Alpha9 patches the issue.

CVSS 3.1 · 5.1 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-72399

net: enetc: check the number of BDs needed for xdp_frame

In the Linux kernel, the following vulnerability has been resolved: net: enetc: check the number of BDs needed for xdp_frame The size of xdp_redirect_arr array is ENETC_MAX_SKB_FRAGS. However, the number of fragments contained in xdp_frame may be greater than or equal to ENETC_MAX_SKB_FRAGS, which will cause the access to xdp_redirect_arr to be out of bounds.

CVSS 3.1 · 9.8 Critical EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-70635

TimescaleDB 2.29.1 Out-of-Bounds Read DoS via Bulk Dictionary Decompression Negative Index

TimescaleDB through 2.29.1, fixed in commit 517c13e, contains an out-of-bounds read vulnerability that allows authenticated attackers to cause query-result integrity failures or backend crashes by supplying a crafted Simple8b selector-11 value, which is stored in the signed int16 Arrow dictionary-index type and bypasses index validation checks in bulk text dictionary decompression. Attackers with direct DML access to a non-frozen physical compressed hypertable relation can trigger an out-of-bounds read before the base of the live offsets array through the VectorAgg single-text hashing strategy, resulting in incorrect aggregation output, backend SIGSEGV, or PostgreSQL crash recovery depending on build configuration.

CVSS 4.0 · 7.1 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-70634

TimescaleDB 2.29.1 Out-of-Bounds Read Information Disclosure via Dictionary Compression Reverse Iterator

TimescaleDB through 2.29.1, fixed in commit 517c13e, contains an out-of-bounds read in the Dictionary compression reverse row iterator (tsl/src/compression/algorithms/dictionary.c). The forward path validates the decoded index; the reverse path uses an assertion compiled out of release builds, leaving the 64-bit Simple8b index unvalidated and the read offset attacker-controlled. Attackers with DML access to a physical compressed relation can store a crafted datum and run a reverse-order scan. With a pass-by-value column type the out-of-bounds Datum is returned to the client as a normal column value, disclosing backend memory including the shared buffer pool, which SQL access control does not cover.

CVSS 4.0 · 7.2 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-53792

rsync < 3.5.0 Out-of-Bounds Read via Zero-Length Checksum Block

rsync before 3.5.0 contains an out-of-bounds read vulnerability in the sender-side block matching logic that allows a malicious receiver to trigger memory access before the start of an allocated buffer by sending a crafted checksum block with a length of zero. Attackers can send a specially crafted checksum set containing a zero-length block to cause a negative offset calculation during delta computation, resulting in an out-of-bounds read of file data buffer memory on the sender side.

CVSS 4.0 · 7.1 High EPSS < 1% KEV · Not listed
Products
CVE-2026-64273

Input: iforce - bound the device-reported force-feedback effect index

In the Linux kernel, the following vulnerability has been resolved: Input: iforce - bound the device-reported force-feedback effect index iforce_process_packet() handles a status report (packet id 0x02) by taking a force-feedback effect index straight from the device wire and using it to address the per-effect state array: i = data[1] & 0x7f; if (data[1] & 0x80) { if (!test_and_set_bit(FF_CORE_IS_PLAYED, iforce->core_effects[i].flags)) ... } else if (test_and_clear_bit(FF_CORE_IS_PLAYED, iforce->core_effects[i].flags)) { ... } The index is masked only with 0x7f, so it ranges 0..127, but core_effects[] holds only IFORCE_EFFECTS_MAX (32) entries. For an index of 32..127 the test_and_set_bit()/test_and_clear_bit() is an out-of-bounds single-bit read-modify-write past the array. core_effects[] is the second-to-last member of struct iforce, so the write lands in the trailing members and beyond the embedding kzalloc()'d iforce_serio / iforce_usb object. data[1] is unvalidated device payload on both transports (the USB interrupt endpoint and serio), and the status path is not gated on force feedback being present, so a malicious or counterfeit device can set or clear a bit at an attacker-chosen offset past the object. Reject an out-of-range index instead of indexing with it. Bound against the array dimension IFORCE_EFFECTS_MAX rather than dev->ff->max_effects so the check guarantees memory safety regardless of how many effects the device registered. A legitimate "effect started/stopped" status always carries an index below IFORCE_EFFECTS_MAX, so well-formed devices are unaffected; the neighbouring mark_core_as_ready() loop is already bounded and is left untouched.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-45799

Wire: skipGroup() missing negative-length check allows 10-byte payload to crash any Wire-decoding service

Wire provides gRPC and protocol buffers for Android, Kotlin, Swift, and Java. Prior to 6.3.0 and 7.0.0-alpha03, ByteArrayProtoReader32.skipGroup() and ProtoReader.skipGroup() in wire-runtime do not validate that a LENGTH_DELIMITED field length is non-negative before skip(), allowing a crafted protobuf varint encoding -128 as a signed Int to make skip(-128) move the internal position negative and make the next readByte() throw ArrayIndexOutOfBoundsException instead of the documented IOException or ProtocolException, which can crash services using ProtoAdapter.decode(byte[]) on untrusted payloads. This issue is fixed in versions 6.3.0 and 7.0.0-alpha03.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2023-2008

Kernel: udmabuf: improper validation of array index leading to local privilege escalation

A flaw was found in the Linux kernel's udmabuf device driver, within a fault handler. This issue occurs due to the lack of proper validation of user-supplied data, which can result in memory access past the end of an array. This may allow an attacker to escalate privileges and execute arbitrary code in the context of the kernel.

CVSS 3.1 · 8.2 High EPSS 1.0% KEV · Not listed
Vendors
CVE-2024-56598

jfs: array-index-out-of-bounds fix in dtReadFirst

In the Linux kernel, the following vulnerability has been resolved: jfs: array-index-out-of-bounds fix in dtReadFirst The value of stbl can be sometimes out of bounds due to a bad filesystem. Added a check with appopriate return of error code in that case.

CVSS 3.1 · 7.1 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2024-56596

jfs: fix array-index-out-of-bounds in jfs_readdir

In the Linux kernel, the following vulnerability has been resolved: jfs: fix array-index-out-of-bounds in jfs_readdir The stbl might contain some invalid values. Added a check to return error code in that case.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2024-50291

media: dvb-core: add missing buffer index check

In the Linux kernel, the following vulnerability has been resolved: media: dvb-core: add missing buffer index check dvb_vb2_expbuf() didn't check if the given buffer index was for a valid buffer. Add this check.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2024-50161

bpf: Check the remaining info_cnt before repeating btf fields

In the Linux kernel, the following vulnerability has been resolved: bpf: Check the remaining info_cnt before repeating btf fields When trying to repeat the btf fields for array of nested struct, it doesn't check the remaining info_cnt. The following splat will be reported when the value of ret * nelems is greater than BTF_FIELDS_MAX: ------------[ cut here ]------------ UBSAN: array-index-out-of-bounds in ../kernel/bpf/btf.c:3951:49 index 11 is out of range for type 'btf_field_info [11]' CPU: 6 UID: 0 PID: 411 Comm: test_progs ...... 6.11.0-rc4+ #1 Tainted: [O]=OOT_MODULE Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ... Call Trace: <TASK> dump_stack_lvl+0x57/0x70 dump_stack+0x10/0x20 ubsan_epilogue+0x9/0x40 __ubsan_handle_out_of_bounds+0x6f/0x80 ? kallsyms_lookup_name+0x48/0xb0 btf_parse_fields+0x992/0xce0 map_create+0x591/0x770 __sys_bpf+0x229/0x2410 __x64_sys_bpf+0x1f/0x30 x64_sys_call+0x199/0x9f0 do_syscall_64+0x3b/0xc0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x7fea56f2cc5d ...... </TASK> ---[ end trace ]--- Fix it by checking the remaining info_cnt in btf_repeat_fields() before repeating the btf fields.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2024-49930

wifi: ath11k: fix array out-of-bound access in SoC stats

In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: fix array out-of-bound access in SoC stats Currently, the ath11k_soc_dp_stats::hal_reo_error array is defined with a maximum size of DP_REO_DST_RING_MAX. However, the ath11k_dp_process_rx() function access ath11k_soc_dp_stats::hal_reo_error using the REO destination SRNG ring ID, which is incorrect. SRNG ring ID differ from normal ring ID, and this usage leads to out-of-bounds array access. To fix this issue, modify ath11k_dp_process_rx() to use the normal ring ID directly instead of the SRNG ring ID to avoid out-of-bounds array access. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1

CVSS 3.1 · 8.8 High EPSS < 1% KEV · Not listed
Vendors