Search vulnerabilities

Results 1,395

Export CSV
CVE-2026-102997

pypdf: Possible long runtimes for partially malformed FlateDecode streams (Follow-up)

pypdf is a free and open-source pure-python PDF library. Prior to 6.18.1, a crafted PDF containing a partially malformed /FlateDecode stream with padded data can force pypdf/filters.py to use inefficient byte-by-byte decompression while the earlier recovery counter fails to advance for bytes that successfully decode, causing long runtimes and application unavailability. This is a residual issue after the malformed FlateDecode recovery fix. This issue is fixed in version 6.18.1.

CVSS 4.0 · 8.7 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-119203

pypdf: Possible infinite loop when hitting EOF in standard xref table during trailer search

pypdf is a free and open-source pure-python PDF library. Prior to 6.21.4, pypdf can enter an infinite loop while opening a crafted incomplete PDF whose standard cross-reference table reaches the end of the file without a trailer. The trailer search can repeatedly rewind to the same stream position instead of terminating when parsing makes no progress, blocking the processing thread. This issue is fixed in version 6.21.4.

CVSS 4.0 · 7.1 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-119205

pypdf: Possible infinite loop when cloning dictionaries

pypdf is a free and open-source pure-python PDF library. Prior to 6.21.4, pypdf can enter an infinite loop when cloning or duplicating a crafted cyclic DictionaryObject. Clone traversal checked generated destination references rather than the original source references, allowing some source cycles to evade the visited-object check. This issue is fixed in version 6.21.4.

CVSS 4.0 · 7.1 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2023-36807

Infinite Loop when reading malformed objects in pypdf

pypdf is a pure-python PDF library capable of splitting, merging, cropping, and transforming the pages of PDF files. In version 2.10.5 an attacker who uses this vulnerability can craft a PDF which leads to an infinite loop. This infinite loop blocks the current process and can utilize a single core of the CPU by 100%. It does not affect memory usage. That is, for example, the case if the user extracted metadata from such a malformed PDF. Versions prior to 2.10.5 throw an error, but do not hang forever. This issue was fixed with https://github.com/py-pdf/pypdf/pull/1331 which has been included in release 2.10.6. Users are advised to upgrade. Users unable to upgrade should modify `PyPDF2/generic/_data_structures.py::read_object` to an an error throwing case. See GHSA-hm9v-vj3r-r55m for details.

CVSS 3.1 · 6.2 Medium EPSS < 1% KEV · Not listed
Products
CVE-2023-36464

Infinite Loop when a comment isn't followed by a character in pypdf

pypdf is an open source, pure-python PDF library. In affected versions an attacker may craft a PDF which leads to an infinite loop if `__parse_content_stream` is executed. That is, for example, the case if the user extracted text from such a PDF. This issue was introduced in pull request #969 and resolved in pull request #1828. Users are advised to upgrade. Users unable to upgrade may modify the line `while peek not in (b"\r", b"\n")` in `pypdf/generic/_data_structures.py` to `while peek not in (b"\r", b"\n", b"")`.

CVSS 3.1 · 6.2 Medium EPSS < 1% KEV · Not listed
Products
CVE-2026-24688

pypdf has possible Infinite Loop when processing outlines/bookmarks

pypdf is a free and open-source pure-python PDF library. An attacker who uses an infinite loop vulnerability that is present in versions prior to 6.6.2 can craft a PDF which leads to an infinite loop. This requires accessing the outlines/bookmarks. This has been fixed in pypdf 6.6.2. If projects cannot upgrade yet, consider applying the changes from PR #3610 manually.

CVSS 4.0 · 5.1 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-27628

pypdf has a possible infinite loop when loading circular /Prev entries in cross-reference streams

pypdf is a free and open-source pure-python PDF library. Prior to 6.7.2, an attacker who uses this vulnerability can craft a PDF which leads to an infinite loop. This requires reading the file. This has been fixed in pypdf 6.7.2. As a workaround, one may apply the patch manually.

CVSS 4.0 · 1.2 Low EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-84309

pypdf: Possible infinite loop for TreeObject.insert_child

pypdf is a free and open-source pure-python PDF library. Prior to 6.16.0, an attacker can craft a PDF whose cyclic tree structure causes pypdf/generic/_data_structures.py TreeObject.insert_child to follow /Next links indefinitely when a writing code path inserts a child, producing an infinite loop. This issue is fixed in version 6.16.0.

CVSS 4.0 · 6.9 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-33699

pypdf: Possible infinite loop during recovery attempts in DictionaryObject.read_from_stream

pypdf is a free and open-source pure-python PDF library. Versions prior to 6.9.2 have a vulnerability in which an attacker can craft a PDF which leads to an infinite loop. This requires reading a file in non-strict mode. This has been fixed in pypdf 6.9.2. If users cannot upgrade yet, consider applying the changes from the patch manually.

CVSS 4.0 · 4.6 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-71227

Libkcapi: infinite loop denial of service in libkcapi _kcapi_aio_read_all() due to unhandled io_getevents() timeout return

A flaw was found in libkcapi. A local attacker can influence an application that uses the Asynchronous Input/Output (AIO) interface. By reusing an AIO-enabled handle after a prior completion error, the _kcapi_aio_read_all() function can enter a non-terminating wait loop. This can lead to a persistent denial of service, making the affected application or thread unresponsive.

CVSS 3.1 · 5.1 Medium EPSS < 1% KEV · Not listed
Vendors
CVE-2026-116581

Seroval: fromJSON deserializer trusts sequence doneAt (unauthenticated event-loop DoS)

Seroval facilitates JavaScript value stringification, including complex structures beyond JSON.stringify capabilities. Prior to 1.6.8, fromJSON and fromCrossJSON do not validate a sequence node's done index. A crafted done index can create an iterator that never finishes when application code consumes it to completion. An unauthenticated request to a service that deserializes untrusted input can therefore block the event loop, exhaust process memory, or make the service unavailable. This issue is fixed in version 1.6.8.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-63968

ipv6: fix possible infinite loop in fib6_select_path()

In the Linux kernel, the following vulnerability has been resolved: ipv6: fix possible infinite loop in fib6_select_path() Found while auditing the same pattern Sashiko reported in rt6_fill_node() [1]. Apply the same fix as commit f8d8ce1b515a ("ipv6: fix possible infinite loop in fib6_info_uses_dev()"). Writers holding tb6_lock can list_del_rcu(&first->fib6_siblings) without waiting for RCU readers; first->fib6_siblings.next then still points into the old ring and this softirq-side walker never reaches &first->fib6_siblings as its terminator. fib6_purge_rt() always WRITE_ONCE()s first->fib6_nsiblings to 0 before list_del_rcu(), so an inside-loop check is a reliable detach signal. [1] https://sashiko.dev/#/patchset/20260526020227.4857-1-jiayuan.chen%40linux.dev

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-96642

Pillow: TarIO negative size field causes infinite CPU-spin loop

Pillow is a Python imaging library. Prior to 13.0.0, the TarIO initializer in src/PIL/TarIO.py accepts a negative octal member size and computes a backward seek that returns to the same 512-byte header. When the requested member name does not match, the parser repeatedly reads that header, consumes a full CPU core, and never returns. TarIO is reached only when an application directly uses PIL.TarIO.TarIO rather than the default Image.open() path. This issue is fixed in version 13.0.0.

CVSS 4.0 · 7.1 High EPSS < 1% KEV · Not listed
Products
CVE-2026-63908

Input: atmel_mxt_ts - fix boundary check in mxt_prepare_cfg_mem

In the Linux kernel, the following vulnerability has been resolved: Input: atmel_mxt_ts - fix boundary check in mxt_prepare_cfg_mem When a configuration file provides an object size that is larger than the driver's known mxt_obj_size(object), the driver intends to discard the extra bytes. The loop iterates using for (i = 0; i < size; i++). Inside the loop, the condition to skip processing extra bytes is: if (i > mxt_obj_size(object)) continue; Since i is a 0-based index, the valid indices for the object are 0 through mxt_obj_size(object) - 1. When i == mxt_obj_size(object), the condition evaluates to false, and the code processes the byte instead of discarding it. This causes the code to calculate byte_offset = reg + i - cfg->start_ofs and writes the byte there, overwriting exactly one byte of the adjacent instance or object. Update the boundary check to skip extra bytes correctly by using >=.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99135

dm-integrity: fix infinite loop on discard with large tag size

In the Linux kernel, the following vulnerability has been resolved: dm-integrity: fix infinite loop on discard with large tag size When integrity_metadata handles a discard, it fills a buffer with DISCARD_FILLER and writes it over the tags, max_blocks blocks at a time. If the kmalloc fails, the buffer is the on-stack array checksums_onstack and max_size is set to HASH_MAX_DIGESTSIZE. So if the tag size is larger than HASH_MAX_DIGESTSIZE, max_blocks is zero, bi_size is never decremented and the loop never terminates. Fix this by using sizeof(checksums_onstack) as max_size. The array has MAX_TAG_SIZE bytes since commit b93b6643e9b5 ("dm integrity: fix a crash with unusually large tag size"), so max_blocks is at least 1.

CVSS 3.1 · 4.7 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99130

io_uring/cancel: don't spin on local work the task can't run

In the Linux kernel, the following vulnerability has been resolved: io_uring/cancel: don't spin on local work the task can't run io_uring_cancel_generic() refuses to sleep while any ring on the exiting task's tctx has local work pending. It assumes the task is that ring's submitter and that the next io_uring_try_cancel_requests() pass will run the work. This does not hold for a ring that was still IORING_SETUP_R_DISABLED when the task got its tctx node from io_uring_create() or io_ringfd_register(). The submitter is set later by IORING_REGISTER_ENABLE_RINGS, possibly from another task, and only the submitter may run local work on an IORING_SETUP_DEFER_TASKRUN ring. To the exiting task the work stays pending forever, the loop never reaches schedule(), and the task trips the WARN_ON_ONCE() once and then spins in do_exit(). An unprivileged user can set this up at will by creating a disabled ring, having a child enable it and stop, posting to the ring with IORING_OP_MSG_RING and exiting with a request in flight that only the child can complete. The exiting thread burns a CPU until the child runs or dies, and with panic_on_warn set the WARN panics the kernel. Fix by skipping the sleep only when io_allowed_defer_tw_run() allows the task to run the work. This is reasonable since work it cannot run cannot complete any of its requests either, so nothing is lost by sleeping. Drop the WARN_ON_ONCE() since handing a disabled ring to another thread is a supported scenario, not a bug state.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99128

sctp: validate chunk length in the inqueue parser

In the Linux kernel, the following vulnerability has been resolved: sctp: validate chunk length in the inqueue parser SCTP chunks always include a four-byte generic header, but sctp_inq_pop() currently accepts shorter declared lengths. A zero-length chunk leaves chunk_end at the current header. When ASCONF is covered by the association's SCTP-AUTH policy, sctp_assoc_bh_rcv() can continue before the state machine performs its normal chunk-length check. sctp_inq_pop() then returns the same malformed chunk repeatedly and the receive softirq can lock up. A remote SCTP peer can trigger this after establishing an association on a kernel built with CONFIG_IP_SCTP and configured with net.sctp.addip_enable=1 and net.sctp.auth_enable=1. The reproducer did not require application credentials, a shared SCTP AUTH key, or net.sctp.addip_noauth_enable=1. On commit f967455fb2a5 ("seg6: reset IP6CB after IPv6 decapsulation"), one zero-length ASCONF caused repeated watchdog soft-lockup reports in a two-vCPU KVM guest. All 3 pre-trigger health probes succeeded, while 36 of 37 post-trigger probes failed. With this change, all 37 post-trigger probes succeeded and no equivalent soft-lockup signature appeared. Reject chunks shorter than the generic SCTP header at the shared inqueue parser boundary. Mark the packet for discard before either caller can continue processing it, while preserving the four-byte generic minimum. Declared-length 1 through 4 controls and kernel-generated ASCONF traffic remained healthy. The patched sctp_hello selftest passed for IPv4 and IPv6. The complete private reproducer and validation evidence are available directly to maintainers on request.

CVSS 3.1 · 5.9 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99025

openvswitch: fix soft lockup in the netlink flow dump

In the Linux kernel, the following vulnerability has been resolved: openvswitch: fix soft lockup in the netlink flow dump A production compute node carrying a few thousand datapath flows hit a soft lockup inside a single netlink flow dump and panicked. ovs_flow_cmd_dump() calls ovs_flow_stats_get() for every flow it emits, and that releases stats->lock with spin_unlock_bh() once per CPU that has touched the flow. Every release is a local_bh_enable(), and each one runs the pending softirq backlog in the dumping thread's own context. The skb bounds the flows one callback emits, but not the softirq work it absorbs. On a CPU that carries the box's packet load the backlog refills as fast as it drains, so the dumping thread becomes that CPU's softirq engine. It never sleeps and it has no reschedule point, so under voluntary preemption nothing can take the CPU away from it: neither the ksoftirqd the kernel woke to take the work over, nor the stopper thread the softlockup detector dispatches to refresh its timestamp. Hold BH off across the whole callback instead, the way ctnetlink_dump_table() does, so the nested spin_unlock_bh() stop draining softirqs. The loop already runs under rcu_read_lock() and cannot sleep. What it gives up is preemption under CONFIG_PREEMPT, since a BH-off region is not preemptible outside PREEMPT_RT. The region stays short: the skb caps the flows one callback emits, and empty buckets cost no skb space but are each visited once per dump, as the cursor only moves forward. The table grows on insert and shrinks only on flush, so the walk is bounded by the largest flow count the datapath has held. The softirq backlog the callback used to absorb has no bound at all.

CVSS 3.1 · 4.7 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-98993

namespace: don't inherit MNT_UMOUNT in clone_mnt()

In the Linux kernel, the following vulnerability has been resolved: namespace: don't inherit MNT_UMOUNT in clone_mnt() MNT_UMOUNT gets raised on a mount that umount_tree() or umount_one() has taken out of its namespace. It's never cleared. __detach_mounts() unhooks a mount that carries it instead of unmounting it. disconnect_mount() lets an unmounted child stay attached only if its parent carries it. propagate_umount() takes it as the sign that a mount is going to be unmounted when it decides what else can be unmounted, where a chain of locked mounts ends and where a for reparenting an overmount. clone_mnt() copies the flags of the source and only masks MNT_INTERNAL_FLAGS which doesn't include MNT_UMOUNT. A mount that was lazily unmounted but is kept alive by a file descriptor can still be copied when its root is an nsfs or pidfs file because may_copy_tree() accepts those before checking whether the source is mounted at all: mount --bind /proc/self/ns/net /tmp/x exec 3< /tmp/x umount -l /tmp/x mount --bind /proc/self/fd/3 /tmp/y The mount on /tmp/y is attached to the caller's namespace with MNT_UMOUNT already set and every copy of it inherits the flag again. That causes a number of bugs: - Unlink its mountpoint from a mount namespace where it isn't one. __detach_mounts() takes it for a mount that was unmounted earlier, unhooks it from its parent and drops the reference the namespace holds on it. It stays in the namespace with one reference too few and as its own parent, so it can't be unmounted through the file descriptor anymore and the namespace never finds it again. When the namespace goes away it's leaked and points to a freed struct mnt_namespace that may_change_propagation() and anon_ns_root() read on the next propagation change or mount_setattr() through the file descriptor. - Make it shared and unmount a peer. trace_transfers() follows the flag from the peer into it and strips it from its peer group. - Let a propagated umount reach it. gather_candidates() marks it with T_UMOUNT_CANDIDATE but never puts it on the candidate list, so the mark is never cleared and every later propagated umount skips it. If it's the parent of a locked mount handle_locked() takes it as the cutoff and commits the locked child that should have stayed and disconnect_mount() leaves that child attached to it, unmounted under a mounted parent, which is what disconnect_mount() exists to prevent. When the namespace goes away umount_tree() visits the child a second time. And once __detach_mounts() has made it its own parent reparent() never finds the end of the chain of unmounted parents. A clone is a new mount that has never been unmounted. Add MNT_UMOUNT to MNT_INTERNAL_FLAGS so clone_mnt() never copies it. And warn when umount_tree() reaches a mount that already has it set.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-97530

scsi: qla2xxx: Fix soft lockup polling continuation IOCB signature

In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Fix soft lockup polling continuation IOCB signature qla27xx_copy_multiple_pkt() and qla27xx_copy_fpin_pkt() poll rsp_q->ring_ptr->signature for RESPONSE_PROCESSED (0xDEADDEAD) to decide whether the next continuation IOCB has arrived, spinning on cpu_relax() without advancing the ring or decrementing the entry count while it has not. response_t::signature lives at byte offset 60, but a continuation IOCB (sts_cont_entry_t / struct sts_cont_entry_ext) carries raw FC frame payload at that offset (data[56..59]). A received frame whose payload bytes happen to equal 0xDEADDEAD is therefore misread as "not yet arrived", and the loop spins forever in interrupt/DPC context, causing a CPU soft lockup. The poll is also unnecessary: callers of qla27xx_copy_multiple_pkt() (PT_LS4_UNSOL and the NVMe purls path) already gate on qla_chk_cont_iocb_avail(), which guarantees all entry_count IOCBs are present before copying begins. The sibling helper __qla_copy_purex_to_buffer() already drops the signature poll and relies on the entry_type == STATUS_CONT_TYPE guard instead. Remove the signature busy-wait from both helpers, keeping the entry_type guard, and gate the FPIN path with qla_chk_cont_iocb_avail() so it defers and re-processes on the next interrupt once all continuation IOCBs have arrived, mirroring the ELS_AUTH_ELS and PT_LS4_UNSOL arms. With this the signature field is never read on a continuation IOCB, eliminating the payload-aliasing lockup.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products