Search vulnerabilities

Results 1,647

Export CSV
CVE-2026-99789

block: restore the iterator when rejecting a misaligned bio

In the Linux kernel, the following vulnerability has been resolved: block: restore the iterator when rejecting a misaligned bio bio_iov_iter_get_pages() can extract some iovecs before encountering a misaligned one. It releases the pages and rejects the entire bio, but leaves the supplied iterator advanced. An iomap direct-I/O caller may subsequently reexpand the iterator's byte count and fall back to buffered I/O. The reexpanded count then includes bytes before the iterator's current segment, potentially causing iterate_iovec() to read beyond the imported iovec array. In a reproducer using an initial empty iovec followed by 10-byte and 1015-byte segments, writev() returned 1015 instead of 1025 and KASAN reported an 8-byte read beyond the nine-element iovec allocation. Saving and restoring the iterator on the rejected-bio path makes writev() return 1025 and eliminates the KASAN report. Restore the entire iterator rather than reverting a byte count: advancing past an empty segment changes its position without consuming any bytes. Leave successful and partially accepted bio paths unchanged.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99784

9p/xen: fix refcount leak in p9_xen_response() on wrong tag

In the Linux kernel, the following vulnerability has been resolved: 9p/xen: fix refcount leak in p9_xen_response() on wrong tag p9_xen_response() looks up the request for an incoming reply with p9_tag_lookup(), which takes a reference on the returned p9_req_t. When the tag does not resolve to a request in REQ_STATUS_SENT, the function warns and continues the loop without dropping that reference, permanently leaking the p9_req_t and its msize buffers. The reply header, including the tag, is supplied by the backend, so a malicious or buggy 9P backend can leak kernel memory on every crafted response. Drop the reference before continuing.

CVSS 3.1 · 4.0 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99769

drm/vc4: Drop the BO reservations outside of job_lock

In the Linux kernel, the following vulnerability has been resolved: drm/vc4: Drop the BO reservations outside of job_lock vc4_queue_submit() calls drm_exec_fini() with job_lock held and interrupts disabled. Besides unlocking the reservations, drm_exec_fini() frees the object array with kvfree(), which asks for preemptible task context or a non-NMI interrupt, and may reach might_sleep() through vfree(). Considering that an array that exceeds a page can take the vmalloc fallback, call drm_exec_fini() once job_lock is dropped. The reservations are then held across the job kick, which is harmless as nothing in the completion path takes a BO reservation. Note that vc4_attach_fences() has to stay inside the critical section, as it walks exec, which the job done worker is free to release as soon as job_lock is dropped.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99753

drm/loongson: Fix double free on BO initialization failure

In the Linux kernel, the following vulnerability has been resolved: drm/loongson: Fix double free on BO initialization failure If ttm_bo_init_validate() fails, it drops the buffer object's reference and cleans it up through the supplied destroy callback. lsdc_bo_destroy() releases the GEM object and frees the enclosing lsdc_bo, so freeing it again in lsdc_bo_create() causes a double free on a synchronous failure path. Let TTM own the cleanup after initialization has started and return the error directly. Keep the explicit free on drm_gem_object_init() failure, which occurs before ownership is passed to TTM. Tested on LS7A2000 by making drm_vma_offset_add() return -ENOSPC for one selected dumb-buffer creation. The error reached userspace, the destroy callback ran once, and no handle was published or tracked BO retained. Normal buffer creation, zeroing, mapping, readback and release passed. AI assistance was used for the ownership analysis, fix, fault-injection tools, build and test execution.

CVSS 3.1 · 4.7 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99728

mm/huge_memory: fix list corruption when deferred_split_scan() races with deferred_split_folio()

In the Linux kernel, the following vulnerability has been resolved: mm/huge_memory: fix list corruption when deferred_split_scan() races with deferred_split_folio() Since the deferred split queue became a list_lru, the isolate callback moves the folios it took a reference on to an on-stack list, linked through folio->_deferred_list, and deferred_split_scan() takes them off that list with list_del_init() without holding the list_lru lock. deferred_split_folio() does not know about the on-stack list. It only holds the list_lru lock when it looks at the same list_head, and it can run for such a folio: a THP is queued when it is mapped, as a candidate for the underused check, and is queued "again" when a part of it gets unmapped: CPU0 deferred_split_scan() CPU1 deferred_split_folio() list_del_init(&folio->_deferred_list) next->prev = prev prev->next = next entry->next = entry list_lru_lock_irqsave() folio_set_partially_mapped() __list_lru_add() list_empty(item) -> true list_add_tail(item, &l->list) item->next = &l->list item->prev = tail entry->prev = entry The folio now sits on the list_lru with ->prev pointing to itself. The next removal leaves the neighbours pointing to it, and they still do so after the folio has been freed. With CONFIG_DEBUG_LIST: list_del corruption. prev->next should be ffd4000000270090, but was ffd4000000278090. (prev=ffd4000000270090) Fix it by grabbing the lock around list_del_init() so deferred_split_folio() cannot race with it.

CVSS 3.1 · 4.7 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99723

vhost-vdpa: fix pinned page leak in vhost_vdpa_pa_map() error path

In the Linux kernel, the following vulnerability has been resolved: vhost-vdpa: fix pinned page leak in vhost_vdpa_pa_map() error path When pin_user_pages() or vhost_vdpa_map() fails, vhost_vdpa_pa_map() is supposed to unpin the pages pinned after the last successfully mapped chunk, i.e. the range [map_pfn, last_pfn]. The unpin is guarded by nchunks, but nchunks is reset to 0 every time a chunk is mapped from inside the current page list, so a failure after any such boundary leaves that pending range pinned forever. With physically scattered memory nearly every page list contains a boundary, so the leak happens on practically every failed IOTLB update. The pending range is non-empty exactly when a page has been pinned, which last_pfn already tells us, so drop nchunks and test last_pfn.

CVSS 3.1 · 3.3 Low EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99694

ocfs2: do not index before the entry array when dividing an empty bucket

In the Linux kernel, the following vulnerability has been resolved: ocfs2: do not index before the entry array when dividing an empty bucket ocfs2_divide_xattr_bucket() appends an empty bucket carrying a sentinel hash when the source bucket has no divide position, taking that hash from xh_entries[start - 1]. ocfs2_xattr_find_divide_pos() returns count when every entry shares one hash, and its loop does not run at all for count < 2, so an empty bucket comes back with start == count == 0 and the read is xh_entries[-1]. That is outside the __counted_by_le(xh_count) bounds of xh_entries[] and lands on the header, so the value picked up is xh_count | xh_free_start << 16. One above it is written into the new bucket's xh_entries[0] and committed, which leaves a bucket whose first hash does not follow the bucket before it. ocfs2_xattr_bucket_find() binary searches on xh_entries[0], so the broken key hides the range the sentinel was meant to cover: getxattr() answers -ENODATA for an attribute that is stored, and an insert can go to the wrong bucket and leave two copies of a name. The cross cluster divide hands the same value back as a tree record's e_cpos, which then claims a hash range it does not cover. Read xh_entries[0] instead. The branch is only reached when every entry shares one hash, so for a non-empty bucket it holds the same value, and for an empty one it is the slot that carries the bucket key. An empty bucket reaches the divide from ocfs2_check_xattr_bucket_collision(), which reports no collision for one, through ocfs2_add_new_xattr_bucket() and ocfs2_extend_xattr_bucket(). It does not take a failed set to get there: a divide that finds no position is itself what leaves an empty sentinel bucket behind, and a later extend can pick it as the target.

CVSS 3.1 · 4.4 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-133491

Konstanty libmodplug ABC File load_abc.cpp abc_add_drum out-of-bounds

A flaw has been found in Konstanty libmodplug up to 0.8.9.1. The affected element is the function abc_add_drum of the file src/load_abc.cpp of the component ABC File Handler. Executing a manipulation can lead to out-of-bounds read. The attack may be performed from remote. Upgrading to version 0.8.9.2 is sufficient to fix this issue. This patch is called 540f0b8ec3d7979e17a8d6a55e31b8a7b734d463. It is recommended to upgrade the affected component.

CVSS 4.0 · 5.3 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-133490

declare-lab tango Model Loading tango.py Tango.__init__ input validation

A vulnerability was detected in declare-lab tango up to 34ecd38898508017ca937508a047b42817d2b070. Impacted is the function Tango.__init__ of the file tango.py of the component Model Loading. Performing a manipulation of the argument scheduler_name results in improper input validation. The attack is possible to be carried out remotely. The exploit is now public and may be used. This product adopts a rolling release strategy to maintain continuous delivery. Therefore, version details for affected or updated releases cannot be specified. The project was informed of the problem early through an issue report but has not responded yet.

CVSS 4.0 · 5.3 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-130494

An improper firmware authenticity verification vulnerability exists in the affected Ethernet Switches products. An authenticated remote attacker with administrative privileges could exploit the lack of cryptographic signature verification to install unauthorized firmware, potentially leading to arbitrary code execution on the affected device.

CVSS 4.0 · 8.6 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-130493

A hard-coded cryptographic key vulnerability exists in affected Ethernet swiches. The use of a shared cryptographic key with insufficient key strength could allow an unauthenticated remote attacker, under certain conditions, to impersonate affected devices and potentially compromise the confidentiality and integrity of communications.

CVSS 4.0 · 7.7 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99795

cxl/features: Ensure that count is set before access to ent[] __counted_by()

In the Linux kernel, the following vulnerability has been resolved: cxl/features: Ensure that count is set before access to ent[] __counted_by() get_supported_features() assigns entries->num_features only after the memcpy() loop that fills entries->ent[] has already run. Since ent[] is __counted_by(num_features), the compiler's bounds instrumentation sees a 0-length array during that loop and FORTIFY_SOURCE trips on the memcpy. Set @num_features right after allocation, before any write into ent[], so the bound is correct for the whole lifetime of the array. This was found via a fortify panic: memcpy: detected buffer overflow: 384 byte write of buffer size 0 WARNING: lib/string_helpers.c:1035 at __fortify_report+0x54/0xa0 kernel BUG at lib/string_helpers.c:1043! Call trace: __fortify_panic+0x10/0x18 get_supported_features.isra.0+0x4a0/0x4d0 [cxl_core] devm_cxl_setup_features+0x84/0x120 [cxl_core] cxl_pci_probe+0x254/0x5e0 [cxl_pci] Same class of bug, same fix shape as commit 6c9d2e87df40 ("cxl/fwctl: Fix __fortify_panic"), which fixed the analogous issue in cxlctl_get_supported_features() but missed this one. [ dj: Fixed up title typo per Jonathan. ]

CVSS n/a EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99794

Bluetooth: L2CAP: Reject signalling responses in invalid states

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Reject signalling responses in invalid states A peer can send configuration messages while an incoming channel is in BT_CONNECT2, before the security or deferred accept gate has completed. A configuration response can then promote the channel to BT_CONNECTED. Configuration responses can also act on channels that are closing, and a late connection response can move a disconnecting channel back to BT_CONFIG. Accept connection responses only while waiting in BT_CONNECT. Answer configuration requests in BT_CONNECT2, but defer our own request until BT_CONFIG so configuration cannot complete before the gate. Ignore configuration responses outside BT_CONFIG and BT_CONNECTED, and only complete configuration in BT_CONFIG.

CVSS n/a EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99792

smb/server: prevent file publication after tree disconnect

In the Linux kernel, the following vulnerability has been resolved: smb/server: prevent file publication after tree disconnect TREE_DISCONNECT closes the tree's published file handles before marking and removing the tree connection. A concurrent CREATE that already holds a tree reference can therefore publish its file after the close pass. When CREATE drops its reference, the tree can be freed while the published file still points to it. Mark and remove the tree connection before closing its files, and serialize both new-open and durable-reconnect volatile ID publication with that state transition. An opener is then either published in time for the close pass or rejected after disconnect with STATUS_NETWORK_NAME_DELETED. Keep a tree reference while a file carries its tree pointer. This protects asynchronous users that can defer the file's final destruction past tree disconnect. The close pass can race the successful FP_NEW to FP_INITED transition. Take the opening request's file reference atomically with that transition. This keeps the file alive until request completion even if teardown removes the ID immediately. BUG: KASAN: slab-use-after-free in proc_show_files (fs/smb/server/vfs_cache.c:126) Read of size 4 at addr ff11000101540f80 by task poc/153 Call Trace: proc_show_files (fs/smb/server/vfs_cache.c:126) seq_read_iter (fs/seq_file.c:231) proc_reg_read_iter (fs/proc/inode.c:299) vfs_read (fs/read_write.c:574) ksys_read (fs/read_write.c:716) do_syscall_64 (arch/x86/entry/syscall_64.c:84) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) Allocated by: ksmbd_tree_conn_connect (fs/smb/server/mgmt/tree_connect.c:35) smb2_tree_connect (fs/smb/server/smb2pdu.c:2819) handle_ksmbd_work (fs/smb/server/server.c:368) Freed by: kfree (mm/slub.c:6801) handle_ksmbd_work (fs/smb/server/server.c:332)

CVSS n/a EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99778

net/9p/usbg: fix out_req buffer leak in disable_usb9pfs

In the Linux kernel, the following vulnerability has been resolved: net/9p/usbg: fix out_req buffer leak in disable_usb9pfs usb9pfs->out_req is allocated with alloc_ep_req(), which also allocates the request's data buffer (req->buf). disable_usb9pfs() frees it with plain usb_ep_free_request(), which only frees the usb_request structure itself and leaks req->buf on every close. Use free_ep_req() instead, matching the allocator, as documented by its own comment ("Requests allocated via alloc_ep_req() *must* be freed by free_ep_req()").

CVSS n/a EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99761

batman-adv: stop originator purge worker before freeing TT

In the Linux kernel, the following vulnerability has been resolved: batman-adv: stop originator purge worker before freeing TT batadv_mesh_free() releases the translation tables via batadv_tt_free() before batadv_originator_free() stops orig_work. The purge worker can therefore still run while the TT is torn down. When an originator times out, batadv_purge_orig_ref() calls batadv_tt_global_del_orig(), which loads tt.global_hash and walks all buckets while taking their locks: CPU0 CPU1 batadv_tt_free() batadv_purge_orig() batadv_tt_global_del_orig() hash = ...tt.global_hash; batadv_tt_global_table_free() batadv_hash_destroy(hash); spin_lock_bh(&hash->list_locks[i]); Disable orig_work at the beginning of batadv_mesh_free(), directly after the mesh was marked as deactivating. The second disable_delayed_work_sync() in batadv_originator_free() is harmless because it is free'd anyway.

CVSS n/a EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99749

ksmbd: enforce the read-only share flag when creating a stream

In the Linux kernel, the following vulnerability has been resolved: ksmbd: enforce the read-only share flag when creating a stream When a share is read-only, smb2_open() rejects opens that would create or truncate a file. Creating a named stream on an existing file with streams_xattr sets neither O_CREAT nor O_TRUNC, so it passes this check, and smb2_set_stream_name_xattr() then creates the stream. On a Time Machine share, opening a missing AFP_AfpInfo stream also writes one. A user who can write a file at the filesystem level can therefore add streams to it through a read-only share. Do not create a stream or synthesize AFP_AfpInfo when the share is not writable. Existing streams still open normally, and a missing stream opened with FILE_OPEN still returns STATUS_OBJECT_NAME_NOT_FOUND.

CVSS n/a EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99748

ksmbd: revert fsids on durable reconnect and replay failure

In the Linux kernel, the following vulnerability has been resolved: ksmbd: revert fsids on durable reconnect and replay failure On a durable handle reconnect or a request replay, smb2_open() switches to the SMB user's fsids before calling ksmbd_vfs_getattr(). If that call fails, the code jumps to err_out2 and skips ksmbd_revert_fsids() at err_out1. The user's credentials then stay installed on the shared ksmbd worker. Later work on that worker, including other users' requests, runs with the first user's fsuid, fsgid and supplementary groups. ksmbd_free_work_struct() also warns, because work->saved_cred is still set. Jump to err_out1 instead. No path is held at this point, so skipping the path_put() at err_out is correct.

CVSS n/a EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99747

ksmbd: fix NULL pointer dereference in session_user_name() and session_account_type()

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix NULL pointer dereference in session_user_name() and session_account_type() session_user_name() and session_account_type() dereference session->user without checking for NULL. A session can be published and exposed via the procfs session interface before authentication completes, during which session->user is NULL: show_proc_session() -> session_user_name(sess) -> user_guest(session->user) -> NULL->flags -> oops Guard both functions by treating a NULL session->user as an explicit not-yet-authenticated state rather than dereferencing it.

CVSS n/a EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99736

mm/shmem: fix accounting of swapin-error markers

In the Linux kernel, the following vulnerability has been resolved: mm/shmem: fix accounting of swapin-error markers A failed swap read replaces the swap entry with a swapin-error marker in the page-cache and subtracts its pages from "alloced" and "swapped"; however, it leaves their block charge in place. Removing the marker during truncate then subtracts from "swapped" again. This can underflow the counters or make swapped reach zero while other pages remain swapped out, causing swapoff to loop without finding them. When installing the marker, subtract only from "swapped" and let shmem_recalc_inode() reduce "alloced" and release the block charge. Make shmem_free_swap() report successful removal separately from the number of swap pages freed, so removing a swapin-error marker does not subtract from "swapped" again. It's a bit confusing, but replacing a swapped out page by a swapin-error marker in shmem_set_folio_swapin_error() behaves as follows: Initially: alloced=1, swapped=1, nrpages=0 Calling shmem_recalc_inode(inode, 0, -1) -> swapped = 0 -> freed = 1 - 0 - 0 = 1 -> alloced -= freed -> alloced=0, swapped=0, block charge released

CVSS n/a EPSS < 1% KEV · Not listed
Vendors
Products