Search vulnerabilities

Results 24,720

Export CSV
CVE-2026-18413

Out-of-bounds write in the NXP MCUX LPADC ADC driver due to missing adc_sequence buffer size validation

The ADC API requires each driver to reject a sampling sequence whose destination buffer is too small: the buffer_size field of struct adc_sequence in include/zephyr/drivers/adc.h documents that "the driver must ensure that samples are not written beyond the limit and it must return an error if the buffer turns out to be not large enough". The NXP MCUX LPADC driver did not honour that contract. mcux_lpadc_start_read() in drivers/adc/adc_mcux_lpadc.c performed no buffer-size check at all before assigning data->buffer = sequence->buffer. Each completed conversion then stores one 16-bit sample per enabled channel per sampling round through an unbounded *data->buffer++: in mcux_lpadc_isr() for interrupt-driven builds, and in mcux_lpadc_dma_callback() for DMA-driven builds on releases that have the DMA path. A sequence selecting two channels with a two-byte buffer, for example, has its second sample written past the end of the buffer. On a build with CONFIG_USERSPACE, adc_read() and adc_read_async() are system calls. The handler in drivers/adc/adc_handlers.c copies the sequence in from user memory, verifies only that [buffer, buffer + buffer_size) is writable by the calling thread, and rejects a user-supplied options->callback; it deliberately leaves the size arithmetic to the driver. A user-mode thread that has been granted access to an LPADC device object therefore fully controls channels, buffer, buffer_size and options->extra_samplings, and can request far more samples than its buffer can hold: up to channels * 65536 samples into a two-byte buffer, since the sample pointer is only rewound on a repeat sampling, never on the extra samplings of a sequence. The resulting stores are performed by the driver in kernel mode (in the ADC interrupt handler or the DMA completion callback), where the MPU does not restrict the thread's memory domain, so the write walks linearly out of the user partition and into adjacent memory such as other partitions, kernel data or thread stacks. The impact is kernel-memory corruption of attacker-chosen length at an attacker-chosen offset, a plausible privilege-escalation and denial-of-service primitive from an unprivileged user-mode thread. Builds without CONFIG_USERSPACE are affected only as a caller-side robustness defect, since the application itself supplies the buffer. The fix calls the new shared helper adc_sequence_validate_buffer() in drivers/adc/adc_common.c from mcux_lpadc_start_read(). The helper computes active_channels sizeof(uint16_t) (1 + extra_samplings) and returns -ENOMEM before any sampling is started.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-18414

Out-of-bounds write in the ADI MAX32 ADC driver due to incorrect adc_sequence buffer size validation

The ADC API requires each driver to reject a sampling sequence whose destination buffer is too small: the buffer_size field of struct adc_sequence in include/zephyr/drivers/adc.h documents that "the driver must ensure that samples are not written beyond the limit and it must return an error if the buffer turns out to be not large enough". The ADI MAX32 driver did not honour that contract. start_read() in drivers/adc/adc_max32.c compared buffer_size, a byte count, against a sample count ((1 + extra_samplings) channels), ignoring sizeof(uint16_t), so it accepted a buffer half the required size. The samples are then stored through the uint16_t data->buffer by Wrap_MXC_ADC_GetData(), which writes two bytes per sample and advances the pointer by one uint16_t: in adc_max32_start_channel() for synchronous reads, and in adc_max32_isr() for asynchronous ones. A sequence selecting two channels with a two-byte buffer, for example, passes the check and has its second sample written past the end of the buffer. On a build with CONFIG_USERSPACE, adc_read() and adc_read_async() are system calls. The handler in drivers/adc/adc_handlers.c copies the sequence in from user memory, verifies only that [buffer, buffer + buffer_size) is writable by the calling thread, and rejects a user-supplied options->callback; it deliberately leaves the size arithmetic to the driver. A user-mode thread that has been granted access to a MAX32 ADC device object therefore fully controls channels, buffer, buffer_size and options->extra_samplings, and can make the driver write twice as many bytes as its buffer holds. Because the check scales with extra_samplings, the overrun equals the length of the buffer itself, up to channels * 65536 bytes past its end, since the sample pointer is only rewound on a repeat sampling, never on the extra samplings of a sequence. The resulting stores are performed by the driver in kernel mode (in the system call itself, the ADC context timer, or the ADC interrupt handler for asynchronous reads), where the MPU does not restrict the thread's memory domain, so the write walks linearly out of the user partition and into adjacent memory such as other partitions, kernel data or thread stacks. The impact is kernel-memory corruption of attacker-chosen length at an attacker-chosen offset, a plausible privilege-escalation and denial-of-service primitive from an unprivileged user-mode thread. Builds without CONFIG_USERSPACE are affected only as a caller-side robustness defect, since the application itself supplies the buffer. The fix replaces that check in start_read() with a call to the new shared helper adc_sequence_validate_buffer() in drivers/adc/adc_common.c, passing sizeof(uint16_t) as the sample size. The helper computes active_channels sizeof(uint16_t) (1 + extra_samplings) and returns -ENOMEM before any sampling is started.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-18415

Out-of-bounds write in the IEEE 802.15.4 L2 transmit path for oversized non-6LoWPAN frames

ieee802154_send() in subsys/net/l2/ieee802154/ieee802154.c copies the outgoing packet into a single fixed 125-byte transmit buffer (tx_frame_buf_pool, sized IEEE802154_MTU). In builds with CONFIG_NET_L2_IEEE802154_FRAGMENT enabled (the default whenever CONFIG_NET_6LO is set), the branch taken when 6LoWPAN fragmentation is not required performed an unchecked net_buf_add_mem(frame_buf, pkt_buf->data, pkt_buf->len). The only guard was __ASSERT_NO_MSG() inside net_buf_simple_add(), which is compiled out without CONFIG_ASSERT, so an oversized packet silently overran the frame buffer. The defect is not reachable from the radio: for NET_AF_INET6 packets ieee802154_6lo_encode_pkt() compares the whole packet length against IEEE802154_MTU and takes the fragmentation path when it does not fit, so every buffer copied on the unfragmented branch is within bounds. It is reachable through NET_AF_PACKET sockets bound to an 802.15.4 interface: for NET_SOCK_RAW the 6LoWPAN block is skipped entirely and for NET_SOCK_DGRAM it returns early on the address-family test, leaving no length validation anywhere on the transmit path (net_context_sendto() and net_if_tx() apply none, and pkt_buffer_length() does not clamp the allocation for this L2). An application — or, in a CONFIG_USERSPACE build, an unprivileged application thread using the zsock_socket()/zsock_sendto() syscalls — can therefore drive a supervisor-mode out-of-bounds write of chosen bytes past the 125-byte pool buffer. With the default CONFIG_NET_BUF_FIXED_DATA_SIZE of 128 bytes the overrun is bounded to roughly ll_hdr_len + 3 bytes; with CONFIG_NET_BUF_VARIABLE_DATA_SIZE a single storage buffer can be as large as CONFIG_NET_PKT_BUF_TX_DATA_POOL_SIZE, making the overrun far larger. The consequence is corruption of memory adjacent to the pool, with a crash or further compromise of kernel state as the practical impact. The fix validates ll_hdr_len + net_pkt_get_len(pkt) + authtag_len against IEEE802154_MTU before any copy and adds a tailroom-checking copy_pkt_to_frame() helper that returns -EMSGSIZE instead of overrunning the buffer. The same change also linearizes the whole net_buf chain into one MAC frame, so packet storage boundaries no longer become frame boundaries on the wire.

CVSS 3.1 · 6.3 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-112900

Pillow: Argument Injection in Ghostscript call, potentially leading into RCE

Pillow is a Python imaging library. From 2.6.0 until 13.0.0, Pillow is vulnerable to argument injection when invoking Ghostscript for EPS input. EpsImagePlugin.Ghostscript passes a caller-controlled input filename after -f without converting it to a safe absolute path, so a name beginning with a hyphen can be interpreted as a Ghostscript option. An attacker who controls the filename can inject Ghostscript arguments. Arbitrary command execution specifically requires a leading @ argument-file filename and control of the referenced text file containing additional Ghostscript arguments; the reported chain reproduces with the default -dSAFER invocation. This issue is fixed in version 13.0.0.

CVSS 4.0 · 9.2 Critical EPSS 1.3% KEV · Not listed
Products
CVE-2026-99064

cipso: adjust cached option offsets when removing CIPSO

In the Linux kernel, the following vulnerability has been resolved: cipso: adjust cached option offsets when removing CIPSO cipso_v4_skbuff_delattr() removes the CIPSO bytes but does not adjust cached offsets for options that follow them. For example, with a valid 10-byte CIPSO option followed by a seven-byte RR option, parsing records rr at offset 30. Removing CIPSO moves RR to offset 20, while the cached offset remains 30. Consumers such as ip_forward_options() and __ip_options_echo() then access the wrong bytes; the latter may interpret packet data as the option length and copy it into fixed-size option storage. Mirror cipso_v4_delopt() and subtract cipso_len from the srr, rr, ts and router_alert offsets when they follow CIPSO. cipso_len is the distance the first memmove() shifts those options. The later header move and network-header reset relocate the bytes and their offset base together.

CVSS 3.1 · 8.1 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-63923

octeontx2-af: validate body pcifunc in rvu_mbox_handler_rep_event_notify

In the Linux kernel, the following vulnerability has been resolved: octeontx2-af: validate body pcifunc in rvu_mbox_handler_rep_event_notify rvu_mbox_handler_rep_event_notify() in drivers/net/ethernet/marvell/ octeontx2/af/rvu_rep.c queues a sender-controlled REP_EVENT_NOTIFY request body verbatim, and rvu_rep_up_notify() then forwards event->pcifunc (the nested body field, distinct from the AF-normalised header pcifunc) into rvu_get_pfvf(), rvu_get_pf() and the AF->PF mailbox device index without any bounds check. A VF attached to a PF that has been put into switchdev representor mode reaches this path: the VF mailbox handler otx2_pfvf_mbox_handler() forwards every message id including MBOX_MSG_REP_EVENT_NOTIFY to AF without an allowlist, and the AF dispatcher rewrites only msg->pcifunc, leaving struct rep_event::pcifunc attacker-controlled. The sibling rvu_mbox_handler_esw_cfg() refuses requests whose header pcifunc is not rvu->rep_pcifunc; this handler has no equivalent gate. An out-of-range body pcifunc selects an &rvu->pf[]/&rvu->hwvf[] element past the allocated array and, for RVU_EVENT_MAC_ADDR_CHANGE, turns into a six-byte attacker-chosen OOB ether_addr_copy() target inside the queued worker; KASAN reports a slab-out-of-bounds write in rvu_rep_wq_handler. Reject malformed requests at the handler entry by gating on is_pf_func_valid(), which is already the canonical PF/VF range check in this driver; expose it via rvu.h so callers in rvu_rep.c can use it instead of open-coding the same range arithmetic.

CVSS 3.1 · 8.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-75145

FFmpeg Integer Narrowing Conversion OOB Memory Access in AV1 RTP Packetizer

FFmpeg before commit b4c199c contains an incorrect integer narrowing conversion in the AV1 RTP packetizer (libavformat/rtpenc_av1.c). The OBU size is cast to long before comparison against the remaining frame size. On targets where long is 32 bits, including 64-bit Windows, sufficiently large OBU size values are sign-flipped by the narrowing cast, producing a negative value that passes the payload size check. This allows an oversized OBU to bypass the safety bound on affected platforms, leading to out-of-bounds memory access when the oversized value is subsequently used as a copy length.

CVSS 4.0 · 5.8 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-98882

media: chips-media: wave5: Add range checks for dec_output_info

In the Linux kernel, the following vulnerability has been resolved: media: chips-media: wave5: Add range checks for dec_output_info If the driver's dec_output_info contains invalid data the driver can write in invalid memory. Add a range check for that. This fixes this smatch error: drivers/media/platform/chips-media/wave5/wave5-vpuapi.c:588 wave5_vpu_dec_get_output_info() error: buffer overflow 'inst->frame_buf' 64 <= 127

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-86950

An out-of-bounds write issue was addressed with improved bounds checking. This issue is fixed in iOS 18.7.11 and iPadOS 18.7.11, iOS 26.7.1 and iPadOS 26.7.1, macOS Sequoia 15.8.1, macOS Tahoe 26.7.1. Processing a maliciously crafted file may lead to arbitrary code execution. Apple is aware of a report that this issue may have been exploited in an extremely sophisticated attack against specific targeted individuals on versions of iOS before iOS 27.

CVSS 3.1 · 8.8 High EPSS 27.4% KEV · Listed
Vendors
Products
CVE-2019-25654

Core FTP/SFTP Server 1.2 Denial of Service via Buffer Overflow

Core FTP/SFTP Server 1.2 contains a buffer overflow vulnerability that allows attackers to crash the service by supplying an excessively long string in the User domain field. Attackers can paste a malicious payload containing 7000 bytes of data into the domain configuration to trigger an application crash and deny service.

CVSS 4.0 · 8.7 High EPSS < 1% KEV · Not listed
Vendors
CVE-2018-25254

NICO-FTP 3.0.1.19 Buffer Overflow SEH

NICO-FTP 3.0.1.19 contains a structured exception handler buffer overflow vulnerability that allows remote attackers to execute arbitrary code by sending crafted FTP commands. Attackers can connect to the FTP service and send oversized data in response handlers to overwrite SEH pointers and redirect execution to injected shellcode.

CVSS 4.0 · 9.3 Critical EPSS 1.1% KEV · Not listed
Products
CVE-2026-89092

Stack overflow in nscd due to unbounded alloca use

The nscd service in the GNU C Library 2.3.4 onwards may crash due to a stack overflow when a malicious DNS server returns too large a response for a DNS query, resulting in degraded DNS resolution for the system. Exploitation of this bug needs a system that has nscd enabled and using an untrusted DNS server for name resolution, with the compromised DNS server being capable of processing records large enough to result in a stack overflow in an nscd thread stack.  During experimentation, bind 9 was unable to handle large records, but that could change in future or with a different name server.  In typical installations, nscd is executed in an isolated context as its own user without a shell, due to which any compromise of that service is isolated. There is a remote possibility of nscd cache corruption if an attacker manages to get the stack pointer into a desired point in the heap, potentially resulting in other caches in nscd being overwritten with corrupt data through the stack overflow, until the buggy code path eventually results in a crash. Finally, a crash in nscd may result in performance degradation when resolving names, but it does not result in a denial of service.

CVSS 3.1 · 4.2 Medium EPSS < 1% KEV · Not listed
Products
CVE-2026-52356

OS Command Injection via /htdocs/web/diagnostic.php in D-Link DAP1160L A1 Firmware

An OS command injection vulnerability in the /htdocs/web/diagnostic.php endpoint of D-Link DAP1160L A1_FW101WWb04 allows attackers to execute arbitrary commands via injecting arbitrary shell metacharacters.

CVSS 3.1 · 8.8 High EPSS 2.5% KEV · Not listed
Vendors
Products
CVE-2026-103967

Adobe Framemaker | Out-of-bounds Write (CWE-787)

Adobe Framemaker is affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
CVE-2026-53563

Persistent Command Execution

Vulnerability in Citrix UniconOS leading to Persistent Command Execution This issue affects UniconOS: before 2607.2 CR and before 2603 LTSR CU2.

CVSS 4.0 · 6.9 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-86573

Out-of-bounds Write Vulnerability in Hitachi Disk Array Driver for AIX, Hitachi Disk Array Driver for Virtual I/O Server

Out-of-bounds write vulnerability in Hitachi Disk Array Driver for AIX and Hitachi Disk Array Driver for Virtual I/O Server. This issue affects Hitachi Disk Array Driver for AIX: from 01-00 before 01-23-/A; Hitachi Disk Array Driver for Virtual I/O Server: from 01-04 before 01-23-/A.

CVSS 3.1 · 5.1 Medium EPSS < 1% KEV · Not listed
Vendors
CVE-2026-73792

HPE NonStop Java JToolkit - Command Injection and buffer overflow vulnerability

A security vulnerability in HPE NonStop Java JToolkit can allow command Injection and buffer overflow.

CVSS 3.1 · 3.8 Low EPSS < 1% KEV · Not listed
Vendors
Hpe
CVE-2026-16741

OS Command in TR7 Cyber ​​Defense's TR7 ASP

Improper neutralization of special elements used in an OS command ('OS command injection') vulnerability in TR7 Cyber ​​Defense Inc. TR7 ASP on virtual appliance and TR7 Cyber ​​Defense Inc. TR7 ASP on physical appliance allows OS Command Injection. This issue affects TR7 ASP: from 1.0.40.236 before 1.0.1554.2331; TR7 ASP: from 1.6.42.239 before 1.6.1554.2331.

CVSS 3.1 · 9.8 Critical EPSS 1.7% KEV · Not listed
Products