Search vulnerabilities

Results 1,395

Export CSV
CVE-2026-102726

Unbounded PPP IPCP Option Parsing Causes a Worker Stall and Out-of-bounds Read

In Eclipse ThreadX NetX Duo versions 6.0 through 6.5.2.202603a, the PPP IPCP code parses a peer's Configure-Nak without validating each option's length. A malicious PPP peer can stall the PPP thread indefinitely with a zero-length option, taking the link down, and can read back up to four bytes of packet-buffer memory per exchange with a short address option.

CVSS 4.0 · 7.1 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-12629

PL011 UART error interrupts never cleared, enabling an external-peer interrupt-storm denial of service

The ARM PL011 UART driver in drivers/serial/uart_pl011.c fails to acknowledge receive error interrupts. On the PL011, the framing, parity, break, and overrun error interrupts (PL011_IMSC_ERROR_MASK) are cleared only by writing the interrupt-clear register UARTICR; reading the data register clears the RX interrupt and the per-byte RSR status but not the error interrupt status in MIS. The interrupt service routine pl011_isr() acknowledged only the CTS modem-status interrupt and never wrote icr for the error bits, so an asserted error interrupt remains pending after the ISR returns. When an application enables error-interrupt reporting via the public uart_irq_err_enable() API, an attacker who controls the serial peer can deterministically assert these error bits by injecting line errors on the RX line — a baud/stop-bit mismatch or mid-character break (framing/break error), a flipped parity bit (parity error), or FIFO flooding (overrun error). Because the error interrupt is never cleared, the interrupt line stays asserted and the CPU re-enters pl011_isr() immediately and indefinitely, producing an interrupt-storm livelock from which the core makes no forward progress. The impact is an availability-only denial of service (permanent hang), reachable from an external or removable UART peer. Exploitation is gated by configuration: the error interrupt is off by default and no in-tree subsystem enables it, so only applications that explicitly call uart_irq_err_enable() on a PL011-based, interrupt-driven port are affected. The fix makes pl011_isr() acknowledge the pending error bits via uart->icr, breaking the loop, and additionally clears the latched RSR status in pl011_err_check().

CVSS 3.1 · 4.6 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-10686

Missing hop-limit decrement on IPv6 forwarding path allows unbounded packet looping (DoS) in Zephyr routers

Zephyr's IPv6 forwarding path re-sent routed unicast packets without ever decrementing the IPv6 hop limit. Both routing branches of ipv6_route_packet() (subsys/net/ip) were affected: the explicit-route path (net_route_packet()) and the on-link cross-interface path (net_route_packet_if()). Each set the packet forwarding flag and called net_send_data() with the hop limit untouched and no expiry check. Per RFC 8200 the hop-limit decrement is the mechanism that bounds packet lifetime and terminates routing loops; without it, a device acting as an IPv6 router relays looping packets indefinitely. An on-path attacker who can induce or exploit a transient L3 loop turns it into a permanent forwarding storm, causing CPU/bandwidth resource exhaustion (availability DoS) on the forwarder and adjacent links; path-discovery and loop diagnostics that rely on hop-limit expiry are also defeated. Affected configurations. In every affected release the forwarding path is reached via CONFIG_NET_ROUTE (enabled by default when CONFIG_NET_IPV6_NBR_CACHE is set), together with CONFIG_NET_ROUTING for cross-interface routing. Note that CONFIG_NET_IPV6_FORWARDING and CONFIG_NET_IPV4_FORWARDING — which appear in the fix and in this advisory's evidence notes — were introduced after v4.4.0, when the routing options were split and renamed; they do not exist in any affected release. When auditing a v4.4.1-or-earlier configuration, look for CONFIG_NET_ROUTE and CONFIG_NET_ROUTING. IPv4 is not affected in any release. The IPv4 forwarding path (net_route_ipv4_packet() in route_ipv4.c) was added after v4.4.0 and has never shipped in a release. Its TTL decrement and IPv4 header-checksum recomputation landed on main as part of the same fix, so the evidence notes below discuss it, but no released version is reachable by way of IPv4. Affected releases are v1.8.0 through v4.4.1: v1.8.0 introduced net_route_packet() and v2.2.0 added net_route_packet_if(), and neither decremented the hop limit. v4.3.1 carries the explicit-route fix but not the on-link one, so it is affected as well. Fixed on main by 7d8f1afa7345 (explicit-route path) and 589eadc74efa (on-link path).

CVSS 3.1 · 5.8 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-10642

Unbounded TX busy-loop DoS in Zephyr PL011 UART driver under CTS hardware flow control

The Zephyr PL011 UART driver (drivers/serial/uart_pl011.c) contains an unbounded software loop in pl011_irq_tx_enable() that repeatedly invokes the interrupt-driven application callback while the TX interrupt mask bit (PL011_IMSC_TXIM) is set, to work around the controller's level-transition TX-interrupt behavior. When CTS hardware flow control is enabled (devicetree hw-flow-control or runtime UART_CFG_FLOW_CTRL_RTS_CTS) and the wired serial peer de-asserts CTS, the controller stops draining the TX FIFO; pl011_fifo_fill() then returns 0 on every call while the application still has pending data and therefore never disables the TX interrupt. The loop condition never clears, so the thread that called uart_irq_tx_enable() (e.g. h4_send() in the Bluetooth HCI H4 driver) spins indefinitely, hanging the executing context and stalling the transport — a denial of service (CWE-835). An attacker controlling the device attached to the UART's CTS line can trigger the hang by withholding CTS during transmission. Because that peer is the device wired to the UART — which may be a removable or external module (e.g. an off-board Bluetooth controller on the HCI H4 link) rather than a permanently-bonded on-PCB part — the attack vector is scored Adjacent (AV:A) rather than Physical; the security subcommittee should confirm the vector against the specific deployment. Impact is availability only; there is no memory-safety, confidentiality, or integrity consequence. The vulnerable loop was introduced in commit b783bc8448ef (Feb 2025) and shipped in releases v4.1.0 through v4.4.0. The fix breaks out of the loop when CTS is blocking and arms the CTS modem-status interrupt to resume transmission when CTS re-asserts.

CVSS 3.1 · 6.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-63475

isomorphic-git: Circular symbolic references cause non-terminating resolution (DoS)

isomorphic-git is a pure JavaScript implementation of Git for Node.js and browsers. Prior to 1.38.6, isomorphic-git persists server-supplied circular symref= capabilities through updateRemoteRefs, and GitRefManager.resolve() follows the resulting loose symbolic references without a default depth limit or cycle detection. After a clone from a malicious or man-in-the-middle-controlled remote, operations such as log, status, checkout, and branch that resolve refs/remotes/origin/a or refs/remotes/origin/b do not terminate. The circular references remain on disk, leaving the repository unusable for the application and causing a persistent denial of service. This issue is fixed in version 1.38.6.

CVSS 3.1 · 4.3 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-121404

FreeRDP before 3.32.2 Shadow Server CPU Exhaustion via Zero-Length DVC DATA

FreeRDP before 3.32.2 contains a denial of service vulnerability in the shadow server that allows authenticated RDP clients to spin server threads by sending zero-length drdynvc DATA PDUs. Attackers can send empty DATA messages on opened audin or rdpgfx channels, so that FreeRDP_WTSVirtualChannelRead never consumes them, consuming full CPU cores until disconnect.

CVSS 4.0 · 7.1 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-121400

FreeRDP before 3.32.2 CPU Exhaustion via RDG Control Packet

FreeRDP before 3.32.2 contains a denial-of-service vulnerability in rdg_process_control_packet that allows a malicious RD Gateway to exhaust client CPU by sending an incomplete keepalive control packet. Attackers completing the RDG tunnel-open exchange then send an eight-byte header with packetLength 0xFFFF and withhold the body, causing an unbounded no-progress read loop that spins one client thread at full CPU.

CVSS 4.0 · 7.1 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-120596

CVE-2026-120596

A remotely exploitable denial-of-service vulnerability exists in the TCP options parser of the Nut/Net TCP/IP stack included in Nut/OS, developed by Ethernut/Egnite. Nut/OS releases up to version 5.1 are affected. An unauthenticated attacker can send a single TCP segment containing an unknown TCP option with a length byte of zero to any open TCP port on a vulnerable device. When processed, this malformed option triggers an infinite loop in the function NutTcpInputOptions, permanently blocking the TCP processing thread and rendering all TCP-based services unresponsive until the device is rebooted.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-120689

Uncontrolled Recursion in HDF5 H5B__iterate_helper() via Crafted File

HDF5 through 2.2.0 contains an uncontrolled recursion vulnerability in H5B__iterate_helper() in src/H5B.c. When iterating a version 1 B-tree, the function does not verify that a child node’s level matches the expected level. That check is performed only in H5B__cache_deserialize() when a node is first loaded into the metadata cache. A crafted HDF5 file whose B-tree child pointer refers back to a node already in the cache, such as a node that points to itself, bypasses the check and causes unbounded recursion, leading to stack exhaustion and a crash. This can be triggered by calling H5Gget_info() or H5Gget_num_objs() on a group in the crafted file, which reaches H5B_iterate() through H5G__obj_info() and H5G__stab_count(). An attacker who can get a user or application to open a malicious file can cause a denial of service.

CVSS 4.0 · 4.3 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-116671

Infinite loop in Xpdf due to missing validation in JPEG 2000 decoder

Infinite loop in Xpdf 4.06 and earlier, due to incorrect validation of progression order field in JPEG 2000 image.

CVSS 4.0 · 2.1 Low EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-62250

LibreDWG: unbounded allocation in pre-R13 DWG entity decoding

LibreDWG is a free C library to read and write DWG files. Prior to 0.14.8413, a crafted pre-R13 DWG can make `decode_preR13_entities()` in `src/decode.c` enter a nonterminating loop that allocates a new object each iteration. `decode_preR13` in `src/decode_r11.c` computes `size` from the raw file-controlled `entities_start` and `entities_end` header bounds; the callee clamps `end` to `dat->size` but never recalculates `size`. At `end` of input, `bit_read_RC` and `bit_read_RS` stop advancing `dat->byte`, the overflow guard fails because `end` equals `dat->size`, and the no-advance check compares against `oldpos` saved before the loop instead of the previous iteration. This leaves repeated allocation of `dwg->object` entries until allocation fails or the process is OOM-killed, not merely a constant-memory CPU hang. The defect remains after the clamping and no-progress changes associated with the earlier issue 1131. Applications and tools calling `dwg_read_file()` on untrusted files, including `dwg2dxf`, `dwgread` and `dwg2svg`, can suffer denial of service when a user or automated pipeline opens a malformed file; no attacker credentials are required. This issue is fixed in repository nightly version 0.14.8413.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-113794

pypdf: Possible infinite loop when hitting EOF in standard xref table

pypdf is a free and open-source pure-python PDF library. Prior to 6.20.0, an attacker can craft an incomplete PDF that ends inside a standard cross-reference table, causing pypdf to mishandle the unexpected end of file and enter an infinite loop. This issue is fixed in version 6.20.0.

CVSS 4.0 · 6 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2023-46250

pypdf possible Infinite Loop when PdfWriter(clone_from) is used with a PDF

pypdf is a free and open-source pure-python PDF library. An attacker who uses a vulnerability present in versions 3.7.0 through 3.16.4 can craft a PDF which leads to an infinite loop. This infinite loop blocks the current process and can utilize a single core of the CPU by 100%. It does not affect memory usage. That is, for example, the case when the pypdf-user manipulates an incoming malicious PDF e.g. by merging it with another PDF or by adding annotations. The issue was fixed in version 3.17.0. As a workaround, apply the patch manually by modifying `pypdf/generic/_data_structures.py`.

CVSS 3.1 · 5.1 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-59936

pypdf: Possible infinite loop for not terminated inline images

pypdf is a free and open-source pure-python PDF library. Prior to 6.14.1, an attacker can craft a PDF with a page content stream containing a not terminated inline image, causing an infinite loop during inline image end marker detection such as when extracting page text. This issue is fixed in version 6.14.1.

CVSS 4.0 · 8.7 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-59935

pypdf: Possible infinite loop for not terminated inline images (ASCII85 and ASCIIHex filter)

pypdf is a free and open-source pure-python PDF library. Prior to 6.14.2, an attacker can craft a PDF with a page content stream containing a not terminated inline image that uses the ASCII85 or ASCIIHex filters, causing an infinite loop during parsing such as when extracting page text. This issue is fixed in version 6.14.2.

CVSS 4.0 · 8.7 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-84309

pypdf: Possible infinite loop for TreeObject.insert_child

pypdf is a free and open-source pure-python PDF library. Prior to 6.16.0, an attacker can craft a PDF whose cyclic tree structure causes pypdf/generic/_data_structures.py TreeObject.insert_child to follow /Next links indefinitely when a writing code path inserts a child, producing an infinite loop. This issue is fixed in version 6.16.0.

CVSS 4.0 · 6.9 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-33699

pypdf: Possible infinite loop during recovery attempts in DictionaryObject.read_from_stream

pypdf is a free and open-source pure-python PDF library. Versions prior to 6.9.2 have a vulnerability in which an attacker can craft a PDF which leads to an infinite loop. This requires reading a file in non-strict mode. This has been fixed in pypdf 6.9.2. If users cannot upgrade yet, consider applying the changes from the patch manually.

CVSS 4.0 · 4.6 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2023-36464

Infinite Loop when a comment isn't followed by a character in pypdf

pypdf is an open source, pure-python PDF library. In affected versions an attacker may craft a PDF which leads to an infinite loop if `__parse_content_stream` is executed. That is, for example, the case if the user extracted text from such a PDF. This issue was introduced in pull request #969 and resolved in pull request #1828. Users are advised to upgrade. Users unable to upgrade may modify the line `while peek not in (b"\r", b"\n")` in `pypdf/generic/_data_structures.py` to `while peek not in (b"\r", b"\n", b"")`.

CVSS 3.1 · 6.2 Medium EPSS < 1% KEV · Not listed
Products
CVE-2026-27024

pypdf has a possible infinite loop when processing TreeObject

pypdf is a free and open-source pure-python PDF library. Prior to 6.7.1, an attacker who uses this vulnerability can craft a PDF which leads to an infinite loop. This requires accessing the children of a TreeObject, for example as part of outlines. This vulnerability is fixed in 6.7.1.

CVSS 4.0 · 6.9 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-119203

pypdf: Possible infinite loop when hitting EOF in standard xref table during trailer search

pypdf is a free and open-source pure-python PDF library. Prior to 6.21.4, pypdf can enter an infinite loop while opening a crafted incomplete PDF whose standard cross-reference table reaches the end of the file without a trailer. The trailer search can repeatedly rewind to the same stream position instead of terminating when parsing makes no progress, blocking the processing thread. This issue is fixed in version 6.21.4.

CVSS 4.0 · 7.1 High EPSS < 1% KEV · Not listed
Vendors
Products