Search vulnerabilities

Results 347

Export CSV
CVE-2025-69418

Unauthenticated/unencrypted trailing bytes with low-level OCB function calls

Issue summary: When using the low-level OCB API directly with AES-NI or<br>other hardware-accelerated code paths, inputs whose length is not a multiple<br>of 16 bytes can leave the final partial block unencrypted and unauthenticated.<br><br>Impact summary: The trailing 1-15 bytes of a message may be exposed in<br>cleartext on encryption and are not covered by the authentication tag,<br>allowing an attacker to read or tamper with those bytes without detection.<br><br>The low-level OCB encrypt and decrypt routines in the hardware-accelerated<br>stream path process full 16-byte blocks but do not advance the input/output<br>pointers. The subsequent tail-handling code then operates on the original<br>base pointers, effectively reprocessing the beginning of the buffer while<br>leaving the actual trailing bytes unprocessed. The authentication checksum<br>also excludes the true tail bytes.<br><br>However, typical OpenSSL consumers using EVP are not affected because the<br>higher-level EVP and provider OCB implementations split inputs so that full<br>blocks and trailing partial blocks are processed in separate calls, avoiding<br>the problematic code path. Additionally, TLS does not use OCB ciphersuites.<br>The vulnerability only affects applications that call the low-level<br>CRYPTO_ocb128_encrypt() or CRYPTO_ocb128_decrypt() functions directly with<br>non-block-aligned lengths in a single call on hardware-accelerated builds.<br>For these reasons the issue was assessed as Low severity.<br><br>The FIPS modules in 3.6, 3.5, 3.4, 3.3, 3.2, 3.1 and 3.0 are not affected<br>by this issue, as OCB mode is not a FIPS-approved algorithm.<br><br>OpenSSL 3.6, 3.5, 3.4, 3.3, 3.0 and 1.1.1 are vulnerable to this issue.<br><br>OpenSSL 1.0.2 is not affected by this issue.

CVSS 3.1 · 4 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2025-68160

Heap out-of-bounds write in BIO_f_linebuffer on short writes

Issue summary: Writing large, newline-free data into a BIO chain using the line-buffering filter where the next BIO performs short writes can trigger a heap-based out-of-bounds write. Impact summary: This out-of-bounds write can cause memory corruption which typically results in a crash, leading to Denial of Service for an application. The line-buffering BIO filter (BIO_f_linebuffer) is not used by default in TLS/SSL data paths. In OpenSSL command-line applications, it is typically only pushed onto stdout/stderr on VMS systems. Third-party applications that explicitly use this filter with a BIO chain that can short-write and that write large, newline-free data influenced by an attacker would be affected. However, the circumstances where this could happen are unlikely to be under attacker control, and BIO_f_linebuffer is unlikely to be handling non-curated data controlled by an attacker. For that reason the issue was assessed as Low severity. The FIPS modules in 3.6, 3.5, 3.4, 3.3 and 3.0 are not affected by this issue, as the BIO implementation is outside the OpenSSL FIPS module boundary. OpenSSL 3.6, 3.5, 3.4, 3.3, 3.0, 1.1.1 and 1.0.2 are vulnerable to this issue.

CVSS 3.1 · 4.7 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2024-0727

PKCS12 Decoding crashes

Issue summary: Processing a maliciously formatted PKCS12 file may lead OpenSSL to crash leading to a potential Denial of Service attack Impact summary: Applications loading files in the PKCS12 format from untrusted sources might terminate abruptly. A file in PKCS12 format can contain certificates and keys and may come from an untrusted source. The PKCS12 specification allows certain fields to be NULL, but OpenSSL does not correctly check for this case. This can lead to a NULL pointer dereference that results in OpenSSL crashing. If an application processes PKCS12 files from an untrusted source using the OpenSSL APIs then that application will be vulnerable to this issue. OpenSSL APIs that are vulnerable to this are: PKCS12_parse(), PKCS12_unpack_p7data(), PKCS12_unpack_p7encdata(), PKCS12_unpack_authsafes() and PKCS12_newpass(). We have also fixed a similar issue in SMIME_write_PKCS7(). However since this function is related to writing data we do not consider it security significant. The FIPS modules in 3.2, 3.1 and 3.0 are not affected by this issue.

CVSS 3.1 · 5.5 Medium EPSS 3.2% KEV · Not listed
Vendors
CVE-2023-6129

POLY1305 MAC implementation corrupts vector registers on PowerPC

Issue summary: The POLY1305 MAC (message authentication code) implementation contains a bug that might corrupt the internal state of applications running on PowerPC CPU based platforms if the CPU provides vector instructions. Impact summary: If an attacker can influence whether the POLY1305 MAC algorithm is used, the application state might be corrupted with various application dependent consequences. The POLY1305 MAC (message authentication code) implementation in OpenSSL for PowerPC CPUs restores the contents of vector registers in a different order than they are saved. Thus the contents of some of these vector registers are corrupted when returning to the caller. The vulnerable code is used only on newer PowerPC processors supporting the PowerISA 2.07 instructions. The consequences of this kind of internal application state corruption can be various - from no consequences, if the calling application does not depend on the contents of non-volatile XMM registers at all, to the worst consequences, where the attacker could get complete control of the application process. However unless the compiler uses the vector registers for storing pointers, the most likely consequence, if any, would be an incorrect result of some application dependent calculations or a crash leading to a denial of service. The POLY1305 MAC algorithm is most frequently used as part of the CHACHA20-POLY1305 AEAD (authenticated encryption with associated data) algorithm. The most common usage of this AEAD cipher is with TLS protocol versions 1.2 and 1.3. If this cipher is enabled on the server a malicious client can influence whether this AEAD cipher is used. This implies that TLS server applications using OpenSSL can be potentially impacted. However we are currently not aware of any concrete application that would be affected by this issue therefore we consider this a Low severity security issue.

CVSS 3.1 · 6.5 Medium EPSS 2.3% KEV · Not listed
Vendors
CVE-2023-5678

Excessive time spent in DH check / generation with large Q parameter value

Issue summary: Generating excessively long X9.42 DH keys or checking excessively long X9.42 DH keys or parameters may be very slow. Impact summary: Applications that use the functions DH_generate_key() to generate an X9.42 DH key may experience long delays. Likewise, applications that use DH_check_pub_key(), DH_check_pub_key_ex() or EVP_PKEY_public_check() to check an X9.42 DH key or X9.42 DH parameters may experience long delays. Where the key or parameters that are being checked have been obtained from an untrusted source this may lead to a Denial of Service. While DH_check() performs all the necessary checks (as of CVE-2023-3817), DH_check_pub_key() doesn't make any of these checks, and is therefore vulnerable for excessively large P and Q parameters. Likewise, while DH_generate_key() performs a check for an excessively large P, it doesn't check for an excessively large Q. An application that calls DH_generate_key() or DH_check_pub_key() and supplies a key or parameters obtained from an untrusted source could be vulnerable to a Denial of Service attack. DH_generate_key() and DH_check_pub_key() are also called by a number of other OpenSSL functions. An application calling any of those other functions may similarly be affected. The other functions affected by this are DH_check_pub_key_ex(), EVP_PKEY_public_check(), and EVP_PKEY_generate(). Also vulnerable are the OpenSSL pkey command line application when using the "-pubcheck" option, as well as the OpenSSL genpkey command line application. The OpenSSL SSL/TLS implementation is not affected by this issue. The OpenSSL 3.0 and 3.1 FIPS providers are not affected by this issue.

CVSS 3.1 · 5.3 Medium EPSS 5.1% KEV · Not listed
Vendors
CVE-2023-5363

Incorrect cipher key & IV length processing

Issue summary: A bug has been identified in the processing of key and initialisation vector (IV) lengths. This can lead to potential truncation or overruns during the initialisation of some symmetric ciphers. Impact summary: A truncation in the IV can result in non-uniqueness, which could result in loss of confidentiality for some cipher modes. When calling EVP_EncryptInit_ex2(), EVP_DecryptInit_ex2() or EVP_CipherInit_ex2() the provided OSSL_PARAM array is processed after the key and IV have been established. Any alterations to the key length, via the "keylen" parameter or the IV length, via the "ivlen" parameter, within the OSSL_PARAM array will not take effect as intended, potentially causing truncation or overreading of these values. The following ciphers and cipher modes are impacted: RC2, RC4, RC5, CCM, GCM and OCB. For the CCM, GCM and OCB cipher modes, truncation of the IV can result in loss of confidentiality. For example, when following NIST's SP 800-38D section 8.2.1 guidance for constructing a deterministic IV for AES in GCM mode, truncation of the counter portion could lead to IV reuse. Both truncations and overruns of the key and overruns of the IV will produce incorrect results and could, in some cases, trigger a memory exception. However, these issues are not currently assessed as security critical. Changing the key and/or IV lengths is not considered to be a common operation and the vulnerable API was recently introduced. Furthermore it is likely that application developers will have spotted this problem during testing since decryption would fail unless both peers in the communication were similarly vulnerable. For these reasons we expect the probability of an application being vulnerable to this to be quite low. However if an application is vulnerable then this issue is considered very serious. For these reasons we have assessed this issue as Moderate severity overall. The OpenSSL SSL/TLS implementation is not affected by this issue. The OpenSSL 3.0 and 3.1 FIPS providers are not affected by this because the issue lies outside of the FIPS provider boundary. OpenSSL 3.1 and 3.0 are vulnerable to this issue.

CVSS 3.1 · 7.5 High EPSS 3.9% KEV · Not listed
Vendors
Debian Netapp Openssl and 1 more
Products
CVE-2026-28386

Out-of-bounds Read in AES-CFB-128 on X86-64 with AVX-512 Support

Issue summary: Applications using AES-CFB128 encryption or decryption on systems with AVX-512 and VAES support can trigger an out-of-bounds read of up to 15 bytes when processing partial cipher blocks. Impact summary: This out-of-bounds read may trigger a crash which leads to Denial of Service for an application if the input buffer ends at a memory page boundary and the following page is unmapped. There is no information disclosure as the over-read bytes are not written to output. The vulnerable code path is only reached when processing partial blocks (when a previous call left an incomplete block and the current call provides fewer bytes than needed to complete it). Additionally, the input buffer must be positioned at a page boundary with the following page unmapped. CFB mode is not used in TLS/DTLS protocols, which use CBC, GCM, CCM, or ChaCha20-Poly1305 instead. For these reasons the issue was assessed as Low severity according to our Security Policy. Only x86-64 systems with AVX-512 and VAES instruction support are affected. Other architectures and systems without VAES support use different code paths that are not affected. OpenSSL FIPS module in 3.6 version is affected by this issue.

CVSS 3.1 · 9.1 Critical EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2007-4995

openssl dtls out of order vulnerabilitiy

Off-by-one error in the DTLS implementation in OpenSSL 0.9.8 before 0.9.8f allows remote attackers to execute arbitrary code via unspecified vectors.

CVSS 2.0 · 9.3 Critical EPSS 10.5% KEV · Not listed
Vendors
CVE-2007-3108

openssl: RSA side-channel attack

The BN_from_montgomery function in crypto/bn/bn_mont.c in OpenSSL 0.9.8e and earlier does not properly perform Montgomery multiplication, which might allow local users to conduct a side-channel attack and retrieve RSA private keys.

CVSS 2.0 · 1.2 Low EPSS < 1% KEV · Not listed
Vendors
CVE-2006-4343

openssl sslv2 client code

The get_server_hello function in the SSLv2 client code in OpenSSL 0.9.7 before 0.9.7l, 0.9.8 before 0.9.8d, and earlier versions allows remote servers to cause a denial of service (client crash) via unknown vectors that trigger a null pointer dereference.

CVSS 2.0 · 4.3 Medium EPSS 19.4% KEV · Not listed
Vendors
Canonical Debian Openssl and 1 more
Products
CVE-2009-4355

openssl significant memory leak in certain SSLv3 requests (DoS)

Memory leak in the zlib_stateful_finish function in crypto/comp/c_zlib.c in OpenSSL 0.9.8l and earlier and 1.0.0 Beta through Beta 4 allows remote attackers to cause a denial of service (memory consumption) via vectors that trigger incorrect calls to the CRYPTO_cleanup_all_ex_data function, as demonstrated by use of SSLv3 and PHP with the Apache HTTP Server, a related issue to CVE-2008-1678.

CVSS 2.0 · 5.0 Medium EPSS 9.2% KEV · Not listed
Vendors
CVE-2009-3767

OpenLDAP: Doesn't properly handle NULL character in subject Common Name

libraries/libldap/tls_o.c in OpenLDAP 2.2 and 2.4, and possibly other versions, when OpenSSL is used, does not properly handle a '\0' character in a domain name in the subject's Common Name (CN) field of an X.509 certificate, which allows man-in-the-middle attackers to spoof arbitrary SSL servers via a crafted certificate issued by a legitimate Certification Authority, a related issue to CVE-2009-2408.

CVSS 2.0 · 4.3 Medium EPSS 3.3% KEV · Not listed
Vendors
Products
Mac Os X Fedora Openldap and 3 more
CVE-2009-3766

mutt: missing host name vs. SSL certificate name checks

mutt_ssl.c in mutt 1.5.16 and other versions before 1.5.19, when OpenSSL is used, does not verify the domain name in the subject's Common Name (CN) field of an X.509 certificate, which allows man-in-the-middle attackers to spoof SSL servers via an arbitrary valid certificate.

CVSS 2.0 · 6.8 Medium EPSS 1.1% KEV · Not listed
Vendors
Products
CVE-2009-3765

mutt: Doesn't properly handle NULL character in subject Common Name

mutt_ssl.c in mutt 1.5.19 and 1.5.20, when OpenSSL is used, does not properly handle a '\0' character in a domain name in the subject's Common Name (CN) field of an X.509 certificate, which allows man-in-the-middle attackers to spoof arbitrary SSL servers via a crafted certificate issued by a legitimate Certification Authority, a related issue to CVE-2009-2408.

CVSS 2.0 · 6.8 Medium EPSS 1.1% KEV · Not listed
Vendors
Products
CVE-2006-3738

openssl get_shared_ciphers overflow

Buffer overflow in the SSL_get_shared_ciphers function in OpenSSL 0.9.7 before 0.9.7l, 0.9.8 before 0.9.8d, and earlier versions has unspecified impact and remote attack vectors involving a long list of ciphers.

CVSS 2.0 · 10.0 Critical EPSS 49.9% KEV · Not listed
Vendors
CVE-2006-2940

openssl public key DoS

OpenSSL 0.9.7 before 0.9.7l, 0.9.8 before 0.9.8d, and earlier versions allows attackers to cause a denial of service (CPU consumption) via parasitic public keys with large (1) "public exponent" or (2) "public modulus" values in X.509 certificates that require extra time to process when using RSA signature verification.

CVSS 2.0 · 7.8 High EPSS 5.1% KEV · Not listed
Vendors
CVE-2009-2409

deprecate MD2 in SSL cert validation (Kaminsky)

The Network Security Services (NSS) library before 3.12.3, as used in Firefox; GnuTLS before 2.6.4 and 2.7.4; OpenSSL 0.9.8 through 0.9.8k; and other products support MD2 with X.509 certificates, which might allow remote attackers to spoof certificates by using MD2 design flaws to generate a hash collision in less than brute-force time. NOTE: the scope of this issue is currently limited because the amount of computation required is still large.

CVSS 2.0 · 5.1 Medium EPSS 4.3% KEV · Not listed
Vendors
Gnu Mozilla Openssl and 1 more
CVE-2009-1390

Mutt 1.5.19 SSL chain verification flaw

Mutt 1.5.19, when linked against (1) OpenSSL (mutt_ssl.c) or (2) GnuTLS (mutt_ssl_gnutls.c), allows connections when only one TLS certificate in the chain is accepted instead of verifying the entire chain, which allows remote attackers to spoof trusted servers via a man-in-the-middle attack.

CVSS 2.0 · 6.8 Medium EPSS 1.7% KEV · Not listed
Vendors
Products
CVE-2006-2937

openssl ASN.1 DoS

OpenSSL 0.9.7 before 0.9.7l and 0.9.8 before 0.9.8d allows remote attackers to cause a denial of service (infinite loop and memory consumption) via malformed ASN.1 structures that trigger an improperly handled error condition.

CVSS 2.0 · 7.8 High EPSS 11.0% KEV · Not listed
Vendors
CVE-2009-1387

openssl: DTLS out-of-sequence message handling NULL deref DoS

The dtls1_retrieve_buffered_fragment function in ssl/d1_both.c in OpenSSL before 1.0.0 Beta 2 allows remote attackers to cause a denial of service (NULL pointer dereference and daemon crash) via an out-of-sequence DTLS handshake message, related to a "fragment bug."

CVSS 2.0 · 5.0 Medium EPSS 10.3% KEV · Not listed
Products