Search vulnerabilities

Results 413

Export CSV
CVE-2026-113351

libexpat 2.7.2 through 2.9.0 Denial of Service via XML_ParserReset

libexpat 2.7.2 through 2.9.0 contains a denial of service vulnerability because XML_ParserReset zeroes the direct byte count but never offsets tracked heap allocations. Attackers can submit a large XML document so later documents on the same reset parser fail with XML_ERROR_NO_MEMORY until it is recreated.

CVSS 4.0 · 8.2 High EPSS < 1% KEV · Not listed
Products
CVE-2026-98595

udp: remove a disconnected socket from the 4-tuple hash table

In the Linux kernel, the following vulnerability has been resolved: udp: remove a disconnected socket from the 4-tuple hash table A UDP socket bound to a specific address and port keeps its entry in the 4-tuple hash table after it is disconnected: sk binds to 127.0.0.1:21001 sk connects to 127.0.0.2:20001 // filed in the 4-tuple table sk disconnects, connect(AF_UNSPEC) // still filed, peer now 0.0.0.0:0 __udp_disconnect() takes a socket out of that table only as a side effect of ->rehash() or ->unhash(), and it skips ->rehash() when SOCK_BINDADDR_LOCK is set and ->unhash() when SOCK_BINDPORT_LOCK is set. commit 6996a2d2d0a6 ("udp: Unhash auto-bound connected sk from 4-tuple hash table when disconnected.") fixed the same end state for a wildcard-bound socket, by a path this one does not take. The entry is counted whether or not anything hits it. hash4_cnt on the hash2 slot stays raised for as long as the socket lives, so udp_has_hash4() keeps sending every packet for that address and port through the 4-tuple lookup first. On IPv6 it can also be hit. __udp_disconnect() does not clear sk_v6_daddr, so udp_v6_rehash() files the entry under the peer the socket was connected to with a zero dport, and inet6_match() compares that same field: a datagram from the former peer with a zero source port matches, and source port zero is accepted on receive. On IPv4 the peer is cleared, so a match would need a zero source address as well, which the routing layer rejects as martian. The stale sk_v6_daddr is a separate defect, not addressed here; removing the entry closes this path either way. The entry can also be relocated. __udp_disconnect() clears sk_bound_dev_if, so a subsequent SO_BINDTODEVICE calls ->rehash(), and because the receive address is still specific udp_lib_rehash() moves the entry instead of removing it, into the bucket that (rcv_saddr, num, 0, 0) hashes to -- a pure function of the address and port, so every socket reaching this state on one address and port collects in one bucket. The bucket cannot be chosen from outside, as udp_ehashfn() is seeded with a per-boot secret. This last one became reachable only with commit 644f9108f3a5 ("udp: Make rehash4 independent in udp_lib_rehash()"), which moved the hash4 handling out of a branch a disconnected socket does not take; the stale entry itself dates from the commit in Fixes. Take the socket out of the table before __udp_disconnect() runs, while it still matches how it was filed. This also reaches the wildcard case ahead of udp_lib_rehash()'s udp_unhash4() branch, leaving that branch unreachable from udp_disconnect(); removing it belongs in net-next. udp_disconnect() and udp_abort() are the only UDP entries into __udp_disconnect(), which is shared with raw, ping and l2tp sockets that are not struct udp_sock: ping_prot.obj_size is sizeof(struct inet_sock), so udp_hashed4() on one would read past the allocation.

CVSS 3.1 · 3.3 Low EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-68091

HID: wacom: stop hardware after post-start probe failures

In the Linux kernel, the following vulnerability has been resolved: HID: wacom: stop hardware after post-start probe failures wacom_parse_and_register() starts HID hardware before registering inputs and initializing pad LEDs/remotes. Those later steps can fail, but their error paths currently release Wacom resources without stopping the HID hardware. Route post-hid_hw_start() failures through hid_hw_stop() before releasing driver resources. This issue was identified during our ongoing static-analysis research while reviewing kernel code.

CVSS 3.1 · 8.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-109869

undici vulnerable to Denial of Service via unhandled error on excessive content-encodings

undici is an HTTP client library for Node.js. In versions 6.23.0 through 6.29.0, 7.18.0 through 7.30.0, and 8.0.0 through 8.12.1, its fetch() implementation crashes the Node.js process when a malicious server returns a response with more than five content codings and closes the connection before sending the body. undici rejects such responses because of a content-encoding limit, but it created the internal response stream before that check and returned without attaching an error listener or aborting the request, so the early close surfaces a content-length mismatch on the orphaned stream, which Node.js treats as an unhandled error and terminates the process. A remote, unauthenticated server can trigger this with a single response, even when the application correctly catches the fetch() rejection, resulting in a denial of service. The issue is fixed in undici 6.29.1, 7.30.1, and 8.12.2, and users should upgrade to one of those versions or later. There is no workaround.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-31668

seg6: separate dst_cache for input and output paths in seg6 lwtunnel

In the Linux kernel, the following vulnerability has been resolved: seg6: separate dst_cache for input and output paths in seg6 lwtunnel The seg6 lwtunnel uses a single dst_cache per encap route, shared between seg6_input_core() and seg6_output_core(). These two paths can perform the post-encap SID lookup in different routing contexts (e.g., ip rules matching on the ingress interface, or VRF table separation). Whichever path runs first populates the cache, and the other reuses it blindly, bypassing its own lookup. Fix this by splitting the cache into cache_input and cache_output, so each path maintains its own cached dst independently.

CVSS 3.1 · 9.8 Critical EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-23445

igc: fix page fault in XDP TX timestamps handling

In the Linux kernel, the following vulnerability has been resolved: igc: fix page fault in XDP TX timestamps handling If an XDP application that requested TX timestamping is shutting down while the link of the interface in use is still up the following kernel splat is reported: [ 883.803618] [ T1554] BUG: unable to handle page fault for address: ffffcfb6200fd008 ... [ 883.803650] [ T1554] Call Trace: [ 883.803652] [ T1554] <TASK> [ 883.803654] [ T1554] igc_ptp_tx_tstamp_event+0xdf/0x160 [igc] [ 883.803660] [ T1554] igc_tsync_interrupt+0x2d5/0x300 [igc] ... During shutdown of the TX ring the xsk_meta pointers are left behind, so that the IRQ handler is trying to touch them. This issue is now being fixed by cleaning up the stale xsk meta data on TX shutdown. TX timestamps on other queues remain unaffected.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-112180

MISP Incomplete Event Deletion Leaves Orphaned Sensitive Records

MISP contains a data integrity flaw in its event deletion logic. When a user deletes an event, several associated records are not removed from the database, leaving them as orphaned entries. The affected record types include event report tags, event graph entries, proposal (shadow attribute) correlations, fuzzy ssdeep correlation chunks, and attachment scan results. These orphaned records may contain sensitive threat intelligence data such as correlation mappings, scan results, and report metadata that should have been removed along with the parent event. Their persistence beyond the intended deletion lifecycle creates a risk of unintended data retention and potential information exposure if the records are reachable through other application queries or administrative interfaces. Preconditions: - An authenticated user with sufficient privileges to delete events in MISP. - The event must have associated reports, graphs, correlations, ssdeep chunks, or attachment scan results. Impact: - Residual sensitive data persists in the database after the parent event is deleted. - Accumulation of orphaned records over time may contribute to storage bloat. - Orphaned records may be inadvertently exposed through other data-access paths that do not validate the existence of the parent event. Affected versions: <2.5.48

CVSS 4.0 · 5.1 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-98774

rust_binder: cancel deferred work items in thread exit

In the Linux kernel, the following vulnerability has been resolved: rust_binder: cancel deferred work items in thread exit If there are deferred work items on the thread todo list, then they are not cleaned up in the Thread::release() method. Thus, update the code to clean up the work items even if they are deferred. This can happen if the thread dies while it has an active outgoing transaction.

CVSS 3.1 · 3.3 Low EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-98558

net: flush skb_defer_nodes in dev_cpu_dead()

In the Linux kernel, the following vulnerability has been resolved: net: flush skb_defer_nodes in dev_cpu_dead() When a CPU goes offline, dev_cpu_dead() drains its softnet queues (completion_queue, output_queue, poll_list, process_queue, and input_pkt_queue), but leaves net_hotdata.skb_defer_nodes untouched. If oldcpu goes offline while holding pending skbs in its skb_defer_nodes lists (e.g. below the sysctl_skb_defer_max >> 1 IPI threshold, or if the IPI races with CPU teardown), those skbs remain stranded until oldcpu is brought back online. If any of these skbs hold page_pool fragments, page_pool_destroy() will stall indefinitely waiting for inflight pages to be returned when a netdev or driver is torn down while oldcpu is offline. Additionally, if smp_call_function_single_async() fails in kick_defer_list_purge() because the target CPU went offline, reset defer_ipi_scheduled to 0 so future IPI kicks are not blocked when the CPU comes back online. Also, if oldcpu was the last online CPU on its NUMA node, drain that node's slot across all CPUs so no skbs deferred from that node remain stranded on idle remote CPUs (or if the node itself is subsequently offlined). Finally, in skb_attempt_defer_free(), re-check cpu_online(cpu) and whether the caller migrated CPUs after llist_add(), flushing the node list if so, to close the preemption TOCTOU race against CPU/node teardown.

CVSS 3.1 · 4.1 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-109276

ImageMagick before 6.9.13-57 and 7.x before 7.1.2-32 Temporary File Leak in JNG Decoder

ImageMagick before 6.9.13-57 and 7.x before 7.1.2-32 contains an incomplete cleanup flaw in the JNG decoder that fails to remove temporary files when processing crafted input. Attackers can submit crafted JNG files for processing to repeatedly leak temporary files, consuming disk space and degrading availability.

CVSS 4.0 · 6.9 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-102030

Junos OS and Junos OS Evolved: An attacker causes routing-daemon denial of service when BGP MVPN inter-region tunneling is used

An Incomplete Cleanup vulnerability in the rpd process of Juniper Networks Junos OS and Junos OS Evolved allows a configured MVPN neighbor to cause a denial of service via a BGP MVPN update when an inter‑region segmented VRF with 'protocols mvpn inter-region-template' is configured.

CVSS 4.0 · 8.7 High EPSS < 1% KEV · Not listed
CVE-2026-19740

Bluetooth LE Controller: retained RX node leak and reachable assertion in the PHY Update procedure

The Link Layer Control Procedure (LLCP) implementation of the Zephyr software Bluetooth LE Controller retains the receive node that carried an accepted LL_PHY_UPDATE_IND so that it can later be reused for the host notification when the update instant is reached (llcp_rx_node_retain() in subsys/bluetooth/controller/ll_sw/ull_llcp.c, and the node is deliberately not recycled while marked NODE_RX_TYPE_RETAIN). The invalid-PDU arms of llcp_lp_pu_rx() and llcp_rp_pu_rx() in subsys/bluetooth/controller/ll_sw/ull_llcp_phy.c completed the procedure via llcp_lr_complete() / llcp_rr_complete() without first releasing that retained node, so the procedure context — the only remaining reference to the node — was freed while the node was still held out of the receive pool. A peer device on an established LE connection can drive this deterministically and without pairing or encryption. Against a peripheral it sends LL_PHY_REQ, receives LL_PHY_RSP, sends a valid LL_PHY_UPDATE_IND with an instant a few connection events in the future (so the node becomes retained), and then, before the instant is reached, sends any other LL Control PDU such as LL_LENGTH_REQ; ull_cp_rx() routes it to the active remote PHY Update procedure, which takes the invalid-PDU path. The mirror case applies to a locally initiated PHY Update followed by an LL_REJECT_IND. In the default configuration (CONFIG_BT_ASSERT and CONFIG_BT_CTLR_ASSERT_DEBUG both default y) the violated invariant in llcp_lr_check_done() / llcp_rr_check_done() triggers a controller assertion, ending in k_oops() (or k_panic()) — a single crafted PDU sequence from radio range faults the device. With those assertions compiled out, each attempt silently leaks one receive PDU node and its memq link; because the controller receive pool is small (PDU_RX_CNT, driven by CONFIG_BT_CTLR_RX_BUFFERS, which defaults to 1) and each attempt costs the attacker only a reconnect, a few repetitions exhaust the pool and leave Bluetooth inoperable until reboot. On releases v3.4.0 through v3.7.x the assertion is never reached, whatever the configuration, so every attempt leaks silently. The impact is limited to availability: the orphaned node leaves no dangling pointer that is later dereferenced and is never delivered to the host, so there is no memory corruption or information disclosure. The same pull request applies the identical release to the Connection Update and CIS-create procedures, whose invalid-PDU arms had the same omission.

CVSS 3.1 · 6.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-19739

Bluetooth LE controller leaks a retained RX node when an unexpected LL Control PDU arrives during a Connection Update

The Bluetooth Link Layer control procedure code in subsys/bluetooth/controller/ll_sw/ull_llcp_conn_upd.c retains the received RX node while a Connection Update / Connection Parameter procedure waits for its instant, so the node can later carry the host notification (llcp_rx_node_retain(), which marks it NODE_RX_TYPE_RETAIN and thereby suppresses the normal recycling in ull.c). The default: arm of llcp_rp_cu_rx() and llcp_lp_cu_rx() — the "invalid PDU, terminate the connection" path — completed the procedure without releasing that retained node. llcp_rr_check_done() then dequeued and freed the procedure context with ctx->node_ref.rx still pointing at the retained node, dropping the last reference to it. A peer device in radio range can reach this without pairing, bonding, or encryption. Against a peripheral, the peer sends a well-formed LL_CONNECTION_UPDATE_IND with an instant a few connection events in the future (the node is retained and the procedure enters RP_CU_STATE_WAIT_INSTANT), then, before the instant is reached, sends any other LL Control PDU such as LL_LENGTH_REQ. ull_cp_rx() routes that PDU into the active remote Connection Update procedure, which takes the invalid-PDU path. The central role is reachable symmetrically after accepting an LL_CONNECTION_PARAM_REQ, and the local-procedure variant is reachable with LL_REJECT_IND. With CONFIG_BT_CTLR_ASSERT_DEBUG enabled (its default), the resulting state violates the invariant asserted in llcp_rr_check_done(), so the two-PDU sequence produces an immediate fatal error in the controller. With those asserts disabled, each occurrence permanently loses one node from the controller's small fixed RX pool (sized from CONFIG_BT_CTLR_RX_BUFFERS, which defaults to 1); repeating the sequence across reconnections exhausts the pool, after which the link-layer receive path operates on a NULL node. The impact is an unauthenticated, remotely triggerable denial of service persisting until reboot; there is no memory-disclosure or memory-corruption consequence, since the leaked node simply becomes unreachable.

CVSS 3.1 · 6.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2025-21924

net: hns3: make sure ptp clock is unregister and freed if hclge_ptp_get_cycle returns an error

In the Linux kernel, the following vulnerability has been resolved: net: hns3: make sure ptp clock is unregister and freed if hclge_ptp_get_cycle returns an error During the initialization of ptp, hclge_ptp_get_cycle might return an error and returned directly without unregister clock and free it. To avoid that, call hclge_ptp_destroy_clock to unregist and free clock if hclge_ptp_get_cycle failed.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-98410

watchdog: da9063: fix suspend/resume handling of HW_RUNNING watchdog

In the Linux kernel, the following vulnerability has been resolved: watchdog: da9063: fix suspend/resume handling of HW_RUNNING watchdog da9063_wdt_suspend() and da9063_wdt_resume() only check watchdog_active(), when the watchdog is left running by the driver sets WDOG_HW_RUNNING in da9063_wdt_probe() but userspace never opens the device, so WDOG_ACTIVE remains cleared, the wdt_disable() will not be executed in da9063_wdt_suspend. In this case, the suspend callback is a no-op and the watchdog keeps counting during system suspend, leading to an unexpected system reset. Check WDOG_HW_RUNNING and wdd,can fix this issue.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-49484

Code for IBM i: Temporary files are visible to all users

Code for IBM i is a Visual Studio Code extension for maintaining and compiling ILE languages on the IBMi platform. Prior to 3.0.1, src/ui/views/objectBrowser.ts stores Object Browser downloads and the edit-save flow content in the shared /tmp directory without reliable cleanup. On systems where /tmp is accessible to other local accounts, file contents remain readable after download or editing operations. This issue is fixed in version 3.0.1.

CVSS 4.0 · 5.1 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-108982

VeraCrypt FUSE-T Auxiliary Service Leak Exposes Decrypted Data

VeraCrypt 1.26.29 (FUSE-T build) on macOS sometimes allows unintended access to decrypted data. It does not terminate the FUSE-T auxiliary service (go-nfsv4) and its associated VeraCrypt core-service helper processes when a volume is dismounted. After VeraCrypt reports the volume as dismounted, the auxiliary mount continues to serve the decrypted volume image (volume.dmg) over a loopback SMB session, and the leaked processes retain an open handle to the underlying raw device. A local user or process can therefore remount and access the decrypted volume without the passphrase, e.g., by reopening a previously accessed path (such as through a macOS Open Recent menu) or by attaching volume.dmg from the stale auxiliary mount. (The macFUSE build of VeraCrypt is not affected.)

CVSS 4.0 · 7.2 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-43502

net/rds: handle zerocopy send cleanup before the message is queued

In the Linux kernel, the following vulnerability has been resolved: net/rds: handle zerocopy send cleanup before the message is queued A zerocopy send can fail after user pages have been pinned but before the message is attached to the sending socket. The purge path currently infers zerocopy state from rm->m_rs, so an unqueued message can be cleaned up as if it owned normal payload pages. However, zerocopy ownership is really determined by the presence of op_mmp_znotifier, regardless of whether the message has reached the socket queue. Capture op_mmp_znotifier up front in rds_message_purge() and use it as the cleanup discriminator. If the message is already associated with a socket, keep the existing completion path. Otherwise, drop the pinned page accounting directly and release the notifier before putting the payload pages. This keeps early send failure cleanup consistent with the zerocopy lifetime rules without changing the normal queued completion path.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2024-53164

net: sched: fix ordering of qlen adjustment

In the Linux kernel, the following vulnerability has been resolved: net: sched: fix ordering of qlen adjustment Changes to sch->q.qlen around qdisc_tree_reduce_backlog() need to happen _before_ a call to said function because otherwise it may fail to notify parent qdiscs when the child is about to become empty.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
CVE-2024-26835

netfilter: nf_tables: set dormant flag on hook register failure

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: set dormant flag on hook register failure We need to set the dormant flag again if we fail to register the hooks. During memory pressure hook registration can fail and we end up with a table marked as active but no registered hooks. On table/base chain deletion, nf_tables will attempt to unregister the hook again which yields a warn splat from the nftables core.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors