Search vulnerabilities

Results 1,648

Export CSV
CVE-2026-18273

Kenwood DNR1007XR USB Incorrect Default Permissions Local Privilege Escalation Vulnerability

Kenwood DNR1007XR USB Incorrect Default Permissions Local Privilege Escalation Vulnerability. This vulnerability allows physically present attackers to escalate privileges on affected installations of Kenwood DNR1007XR devices. An attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit this vulnerability. The specific flaw exists within the configuration of the mount point for the USB filesystem. The issue results from incorrect permissions on a directory used by the product. An attacker can leverage this vulnerability to escalate privileges and execute arbitrary code in the context of root. Was ZDI-CAN-29070.

CVSS 3.0 · 6.6 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-58564

Incorrect Default Permissions in Dell Command Update Allow Local Filesystem Access

Dell Command Update (DCU), versions prior to 5.7.1, contain an Incorrect Default Permissions vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Filesystem access for attacker.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
CVE-2026-19893

D-Link DIR-842 vsftpd vsftpd.conf default permission

A vulnerability was identified in D-Link DIR-842 2.01.B04. This impacts an unknown function of the file /etc/vsftpd.conf of the component vsftpd. Such manipulation leads to incorrect default permissions. It is possible to launch the attack remotely. A high complexity level is associated with this attack. The exploitability is said to be difficult.

CVSS 4.0 · 2.3 Low EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-4793

Local Permissions Misconfiguration Enabling Arbitrary File Read/Write and Installation Denial in Synology Assistant

An incorrect default permissions vulnerability in Synology Assistant before 7.0.7-50095 allows local users to read or write arbitrary files and conduct denial-of-service during installation.

CVSS 3.1 · 7.3 High EPSS < 1% KEV · Not listed
Products
CVE-2026-59119

PowerShell Elevation of Privilege Vulnerability

Incorrect default permissions in Microsoft PowerShell allows an authorized attacker to elevate privileges locally.

CVSS 3.1 · 7.3 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-19841

TRENDNET TEW-813DRU vsftpd vsftpd.conf default permission

A flaw has been found in TRENDNET TEW-813DRU 1.01b01. Impacted is an unknown function of the file /etc/vsftpd.conf of the component vsftpd. This manipulation causes incorrect default permissions. The attack is possible to be carried out remotely. A high degree of complexity is needed for the attack. The exploitability is considered difficult. This vulnerability only affects products that are no longer supported by the maintainer.

CVSS 4.0 · 2.3 Low EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2025-52640

HCL AION is affected by multiple security vulnerabilities.

HCL AION is affected by a vulnerability where the shared storage used by product components is architected without sufficient access separation. Processes sharing the storage may be able to access or modify files beyond their intended scope, potentially resulting in unintended behavior or security impact under certain conditions.

CVSS 3.1 · 4.7 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-63425

Improper Permissions in Lenovo Dock Manager Allowing Local Privilege Escalation

During an internal security assessment, a potential improper permissions vulnerability was discovered in Lenovo Dock Manager that could allow a local authenticated user to execute arbitrary code with elevated privileges.

CVSS 4.0 · 8.5 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2025-61970

Weak permissions in the Vitis™ Unified installation path on local Windows machines could allow a low-privileged user to create arbitrary code, potentially resulting in binary hijacking.

CVSS 4.0 · 7.3 High EPSS < 1% KEV · Not listed
Vendors
Amd
CVE-2025-48505

Weak permissions in the Vitis™ Unified installation path on local Windows machines could allow a low-privileged user to achieve privileged escalation, potentially resulting in arbitrary code execution.

CVSS 4.0 · 7.3 High EPSS < 1% KEV · Not listed
Vendors
Amd
CVE-2026-48790

turso-cli persists Turso platform JWT with world-readable (0o644) file permissions

Turso CLI is the command line interface (CLI) to the open-source database Turso. Versions prior to 1.0.26 persist the user's Turso platform JWT to `settings.json` using Viper's default `configPermissions` of `0o644`, leaving the credential file world-readable on standard Linux and macOS systems. Any other local UID on the host can read the file and recover the platform JWT, which grants full Turso platform access scoped to the user's organizations. Version 1.0.26 patches the issue.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2024-58356

SurrealDB before 2.1.4 Permission Bypass via DEFINE TABLE OVERWRITE

SurrealDB before 2.1.4 silently fails to overwrite table definitions when the DEFINE TABLE ... OVERWRITE clause is used on tables defined with TYPE RELATION. Because table definitions include the PERMISSIONS clause, an attempt to tighten a table's permissions via OVERWRITE does not take effect, and the administrator may incorrectly believe the change was applied. As a result, a client authorized to run queries may continue to access data in that table that the updated (but unapplied) permissions were intended to restrict.

CVSS 4.0 · 2.3 Low EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2019-1982

Cisco Firepower Threat Defense Software HTTP Filtering Bypass Vulnerability

A vulnerability in the HTTP traffic filtering component of Cisco Firepower Threat Defense Software, Cisco FirePOWER Services Software for ASA, and Cisco Firepower Management Center Software could allow an unauthenticated, remote attacker to bypass filtering protections. The vulnerability is due to improper handling of HTTP requests, including those communicated over a secure HTTPS connection, that contain maliciously crafted headers. An attacker could exploit this vulnerability by sending malicious requests to an affected device. An exploit could allow the attacker to bypass filtering and deliver malicious requests to protected systems, allowing attackers to deliver malicious content that would otherwise be blocked.

CVSS 3.1 · 5.3 Medium EPSS < 1% KEV · Not listed
Vendors
CVE-2026-21074

Incorrect Default Permissions in Samsung Bixby Allow Local Privilege Escalation

Incorrect default permissions in Bixby prior to version 4.0.86.0 allows local attackers to execute arbitrary commands with Bixby privilege.

CVSS 4.0 · 7.2 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2025-2782

WatchGuard Terminal Services Agent Local Privilege Escalation via Non-Standard Installation Directory

The WatchGuard Terminal Services Agent on Windows does not properly configure directory permissions when installed in a non-default directory. This could allow an authenticated local attacker to escalate to SYSTEM privileges on a vulnerable system.

CVSS 4.0 · 6.3 Medium EPSS < 1% KEV · Not listed
Vendors
CVE-2025-2781

WatchGuard Mobile VPN with SSL Local Privilege Escalation via Non-Standard Installation Directory

The WatchGuard Mobile VPN with SSL Client on Windows does not properly configure directory permissions when installed in a non-default directory. This could allow an authenticated local attacker to escalate to SYSTEM privileges on a vulnerable system.

CVSS 4.0 · 6.3 Medium EPSS < 1% KEV · Not listed
Vendors
CVE-2024-46695

selinux,smack: don't bypass permissions check in inode_setsecctx hook

In the Linux kernel, the following vulnerability has been resolved: selinux,smack: don't bypass permissions check in inode_setsecctx hook Marek Gresko reports that the root user on an NFS client is able to change the security labels on files on an NFS filesystem that is exported with root squashing enabled. The end of the kerneldoc comment for __vfs_setxattr_noperm() states: * This function requires the caller to lock the inode's i_mutex before it * is executed. It also assumes that the caller will make the appropriate * permission checks. nfsd_setattr() does do permissions checking via fh_verify() and nfsd_permission(), but those don't do all the same permissions checks that are done by security_inode_setxattr() and its related LSM hooks do. Since nfsd_setattr() is the only consumer of security_inode_setsecctx(), simplest solution appears to be to replace the call to __vfs_setxattr_noperm() with a call to __vfs_setxattr_locked(). This fixes the above issue and has the added benefit of causing nfsd to recall conflicting delegations on a file when a client tries to change its security label.

CVSS 3.1 · 9.8 Critical EPSS < 1% KEV · Not listed
Vendors
CVE-2026-39874

A permissions issue was addressed with additional restrictions. This issue is fixed in macOS Sequoia 15.7.8, macOS Sonoma 14.8.8, macOS Tahoe 26.6. A malicious app may be able to gain root privileges.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-57895

Incorrect Default Permissions in Fuji Electric Pupsman Allowing Arbitrary Code Execution

Incorrect default permissions issue exists in Pupsman versions prior to 3.9.0. An attacker can place a malicious executable in the installation folder, which results in arbitrary code execution with SYSTEM privilege

CVSS 4.0 · 8.5 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-40952

Privilge misconfiguration in Secure Access installers

CVE-2026-40952 is a privilege misconfiguration in the Secure Access installer for the Windows client and server prior to version 14.55. Attackers with local access to the client or server can use it to elevate privileges to Administrator when Secure Access is installed in a non-default location.

CVSS 4.0 · 8.5 High EPSS < 1% KEV · Not listed