Remote Code Execution via Service Message Injection in JetBrains TeamCity Build Agent
In JetBrains TeamCity before 2026.2 remote code execution on build agents was possible via service message injection in build configuration names
In JetBrains TeamCity before 2026.2 remote code execution on build agents was possible via service message injection in build configuration names
In JetBrains TeamCity before 2026.2, 2026.1.4 stored XSS in the JVM update warning on the Agent Summary page was possible
In JetBrains TeamCity before 2026.2 stored XSS on the Duplicates report tab was possible
In JetBrains TeamCity before 2026.2, 2026.1.4, 2025.11.8 stored XSS in build statistics charts was possible
In JetBrains TeamCity before 2026.2, 2026.1.4, 2025.11.8 stored XSS on the build Issues tab was possible
In JetBrains TeamCity before 2026.2, 2026.1.4 stored XSS in the Xcode runner configuration selection was possible
In JetBrains TeamCity before 2026.2, 2026.1.4, 2025.11.8 stored XSS in the Finish Build Trigger editor was possible
In JetBrains TeamCity before 2026.2, 2026.1.5 stored XSS on the external Kotlin DSL editor status page was possible
In JetBrains TeamCity before 2026.2, 2026.1.4, 2025.11.8 stored XSS in the Promote build dialog for dependent builds was possible
In JetBrains TeamCity before 2026.2, 2026.1.4, 2025.11.8 stored XSS in the Agent Statistics tooltip was possible
In JetBrains TeamCity before 2026.2, 2026.1.4, 2025.11.8 stored XSS in the checkout rules editor was possible
In JetBrains TeamCity before 2026.2, 2026.1.4, 2025.11.8 stored XSS in the build Report Tab dialog was possible
In JetBrains TeamCity before 2026.2, 2026.1.4, 2025.11.8 stored XSS in the project Report Tab dialog was possible
In the Linux kernel, the following vulnerability has been resolved: NFSv4/pnfs: bound the CB_NOTIFY_DEVICEID array count before allocating decode_devicenotify_args() hands the server's notification count straight to kmalloc_objs() as the array length, without checking it against the message that carried it. Bound it the way nfs4xdr.c bounds an attribute length, against xdr_stream_remaining().
In the Linux kernel, the following vulnerability has been resolved: pnfs/blocklayout: Complete a device upcall when the pipe is closed Once blkmapd has read a whole upcall, rpc_pipe_read() unlinks the message from every pipe list, so the purges in rpc_pipe_release() and rpc_close_pipes() no longer reach it. bl_upcall_ops supplies no .release_pipe callback, and bl_pipe_destroy_msg() returns without completing the upcall because a downcall is expected to follow. A daemon that exits between the read and the write therefore strands its waiter: bl_resolve_deviceid() sleeps in wait_for_completion() and never returns, and it holds nn->bl_mutex across that wait, so every later device resolution in the net namespace blocks behind it. Add a .release_pipe that completes an upcall blkmapd has consumed and left unanswered. Completing an upcall retires it, so a message the framework has already purged is no longer in flight and is not completed a second time here.
In the Linux kernel, the following vulnerability has been resolved: smb: client: validate SMB1 EA list bounds before parsing CIFSSMBQAllEAs() checks the server-provided EA list length by adding it to the response pointer. On 32-bit systems, a positive length can wrap the pointer and pass the comparison. The parser then walks outside the received response while reading the next FEA header. A response with a list length of 0x40000000 reproduces this as a native i386 page fault and kernel panic from listxattr() against an SMB1 server. Check that the EA list starts within the SMB byte area before reading its header. Keep its length unsigned and compare it with the bytes left in the response without pointer addition. SMB1 is not negotiated by default and requires an explicit vers=1.0 mount.
In the Linux kernel, the following vulnerability has been resolved: smb: client: validate NT transaction response layout and offsets validate_ntransact() assumes that the response uses the fixed 18-word NT transaction layout. A different WordCount makes get_bcc() locate the byte count at a different offset from pSMBr->ByteCount, allowing the subsequent bounds checks to use inconsistent response boundaries. The function also turns the 32-bit ParameterOffset and DataOffset fields into pointers before checking their bounds. On a 32-bit client, a large offset can wrap the pointer below end_of_smb and pass the one-sided pointer comparison. The caller then dereferences the parameter pointer or copies from the data pointer. Require the expected WordCount before reading the byte count. Check each offset and count against the received SMB length as integers before forming either pointer. Use subtraction after validating the offset so that the range checks cannot overflow.
In the Linux kernel, the following vulnerability has been resolved: smb: client: reject short or out-of-range FIND response parameters CIFSFindFirst() and CIFSFindNext() read the SearchHandle, SearchCount, EndofSearch and LastNameOffset of a TRANS2_FIND_FIRST2 or TRANS2_FIND_NEXT2 response at ParameterOffset. validate_t2() bounds the offset at 1024 and ParameterCount below 512, and nothing compares them with the number of bytes SendReceive() copied into the buffer or with the size of the response parameters. smb_init() places the request and the response in the same cifs_request allocation and cifs_buf_get() clears only the start of it, so a short response with a ParameterOffset past its end has the search handle, the entry count, the end-of-search flag and the last-entry offset read out of the request that was just sent, or out of whatever the allocation held before, and a ParameterCount smaller than the parameters has them read past the end of the parameter block. The reads stay inside the allocation, but what they return is not part of the response, and CIFSFindFirst() then hands back a search handle the server never sent. That handle is sent back to the server in the next FIND_NEXT2 or FIND_CLOSE2, so two bytes of the buffer leak at an offset the server picks. SMB1 is not negotiated by default; reaching this code requires an explicit vers=1.0 mount. Reject a response whose parameter area is smaller than the response parameters or extends past the received length, returning smb_EIO2() with a new smb_eio_traces value for each of the two responses, like the other response checks this file gained since v6.19. Backports to trees before v6.19 need smb_EIO2() replaced with -EINVAL and the trace.h hunk dropped. A conforming server is not affected. The parameter block of a transaction response is part of the SMB, so ParameterOffset + ParameterCount cannot exceed the smbCalcSize() bytes that SendReceive() copies, and the response parameters are 10 bytes for FIND_FIRST2 and 8 bytes for FIND_NEXT2, which is what T2_FFIRST_RSP_PARMS and T2_FNEXT_RSP_PARMS hold. This patch depends on "smb: client: reject FIND data areas that run past the received response", whose declarations it extends.
In the Linux kernel, the following vulnerability has been resolved: smb: client: reject FIND data areas that run past the received response CIFSFindFirst() and CIFSFindNext() take the directory entries of a TRANS2_FIND_FIRST2 or TRANS2_FIND_NEXT2 response from DataOffset for DataCount bytes. validate_t2() bounds DataOffset at 1024 and ParameterCount + DataCount by the byte count, and nothing compares DataOffset + DataCount with the number of bytes SendReceive() copied into the buffer. smb_init() places the request and the response in the same cifs_request allocation and cifs_buf_get() clears only the start of it, so a short response whose data area extends past its end has srch_entries_start point at bytes of the request that was just sent, or at whatever the allocation held before, and those bytes are parsed as directory entries. cifs_readdir() and find_cifs_entry() walk the entries with nxt_dir_entry(), which checks every entry but the first of a response against the end of the SMB; cifs_query_path_info() and cifs_backup_query_path_info() read the first entry with no check at all. Those reads stay inside the allocation, but what they return is not part of the response. The last entry, which LastNameOffset locates relative to the data area, is bounded against the received response by an earlier patch of this series, as is every entry that cifs_fill_dirent() parses; the walk itself and the two query functions are not. SMB1 is not negotiated by default; reaching this code requires an explicit vers=1.0 mount. Reject a response whose data area extends past the received length, with the -EINVAL that validate_t2() returns for the other malformed transaction responses. cifs_query_path_info() and cifs_backup_query_path_info() still read a whole entry from a data area that may be smaller than one; that is not changed here. A conforming server is not affected. The data block of a transaction response is part of the SMB, so DataOffset + DataCount cannot exceed the smbCalcSize() bytes that SendReceive() copies; coalesce_t2() appends each secondary response to the data area and adds its length to both DataCount and the byte count, which keeps that relation.
In the Linux kernel, the following vulnerability has been resolved: smb: client: reclaim credits for decrypted reads with no matching mid When a decrypted SMB2 READ response carries a MessageId that matches no outstanding request, both the inline receive_encrypted_read() and the offloaded smb2_decrypt_offload() paths drop the frame without accounting the credits the server granted in it. The plaintext unknown-frame path in cifs_demultiplex_thread() already reclaims them with smb2_add_credits_from_hdr(), so encrypted reads leak credits that the plaintext path would not. This also happens for legitimate frames - e.g. a reply that arrives after the client has timed out and dropped the mid - so over a long-lived connection the client's credit count drifts down and can eventually starve it of the ability to issue requests. The frame is AEAD-authenticated, so the granted credits in the decrypted header come from the real server and are safe to apply. Reclaim the credits from the decrypted header before dropping the frame, and export smb2_add_credits_from_hdr() so the SMB2 receive paths can use it.