Export limit exceeded: 429927 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.

Search vulnerabilities

Results 413

Export CSV
CVE-2026-88041

Apache Tomcat: HTTP/2 trailer header cross-contamination

Incomplete cleanup vulnerability in Apache Tomcat allowed an trailer information from a previous request to leak into a subsequent request. This issue affects Apache Tomcat: from 11.0.0-M23 through 11.0.26, from 10.1.27 through 10.1.60, from 9.0.92 through 9.0.122. Users are recommended to upgrade to version 11.0.27, 10.1.61 or 9.0.123, which fix the issue.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed
Products
CVE-2026-98957

wifi: mt76: mt7915: disable rx napi when removing device

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7915: disable rx napi when removing device Unloading the mt7915e module with a MT7916 triggers multiples WARN in __netif_napi_del_locked() and in page_pool_disable_direct_recycling() because the driver does not disable the napi before destroying it. This is troublesome since on MT7916 it is required to unload the module and reinsert it with a different enable_6ghz parameter to change the frequency. The system generally becomes unstable after reinserting the module. Fix it by disabling rx napi inside mt7915e itself, even through napi rx is enabled in the mt76 generic code. Disabling it in the mt76 generic code was previously attempted and reverted because napi was disabled too late and rx handlers could access freed structures. Note that the tx side is enabled and disabled by the mt76 generic code. It is disabled in mt7915_stop_hardware() since, unlike mt7915_unregister_device(), is it also called in the probe path if an error happens after rx napi is enabled.

CVSS 3.1 · 4.4 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-114049

vLLM before 0.31.0 Stale allowed_token_ids Mask via InputBatch.condense

vLLM before 0.31.0 contains a cross-request mask leak in InputBatch.condense() that allows remote attackers to constrain other clients' outputs by leaving stale allowed_token_ids rows. Attackers can submit concurrent constrained generate requests, including via unauthenticated /invocations, so recycled batch slots apply their token allowlist to victims' unrestricted requests.

CVSS 4.0 · 6.3 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-98909

net: cpsw_new: unregister devlink on port registration failure

In the Linux kernel, the following vulnerability has been resolved: net: cpsw_new: unregister devlink on port registration failure cpsw_probe() registers devlink before registering the CPSW ports. If cpsw_register_ports() fails, the error path only unregisters the notifiers and then releases the lower level resources. It does not undo the successful cpsw_register_devlink() call, leaving the devlink instance and its parameters registered after probe has failed. Add a devlink cleanup label for the path where devlink registration has already succeeded, and use it when port registration fails.

CVSS 3.1 · 1.9 Low EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-98910

drm/amdkfd: Unwind debug trap enable on copy_to_user failure

In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Unwind debug trap enable on copy_to_user failure If kfd_dbg_trap_enable() fails while copying runtime_info to userspace, it had already activated the trap, set debug_trap_enabled, taken an extra process reference, and opened the debug event file. Return -EFAULT without unwinding that state, leaving inconsistent trap state and a refcount imbalance that could break later DISABLE/ENABLE. On copy_to_user failure, deactivate the trap and undo the rest of the enable setup before returning.

CVSS 3.1 · 3.3 Low EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-77205

Denial of Service via sending bogus X.509 certificates

Libreswan in FIPS mode has a vulnerability where badly formed received certificates are rejected, but not deleted from the NSS cache. As a result, any real certificates with the same serial number are rejected as well. This can be abused to lock out legitimate peers from connecting. The add_decoded_cert() function missed a call to CERT_DestroyCertificate() due to an incorrect fix for CVE-2026-14957. Sending bogus certificates with new serial numbers could prevent the real certificates with those serial numbers from connecting until the service has restarted.

CVSS 3.1 · 3.7 Low EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-63859

net: airoha: Add missing bits in airoha_qdma_cleanup_tx_queue()

In the Linux kernel, the following vulnerability has been resolved: net: airoha: Add missing bits in airoha_qdma_cleanup_tx_queue() Similar to airoha_qdma_cleanup_rx_queue(), reset DMA TX descriptors in airoha_qdma_cleanup_tx_queue routine. Moreover, reset TX_DMA_IDX to TX_CPU_IDX to notify the NIC the QDMA TX ring is empty.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-72714

Rocq Prover through 9.2.0 Universe Checking State Desynchronised After Module Close

Rocq Prover does not restore the universe graph's copy of the universe checking flag when a module that locally disabled the check is closed. Local Unset Universe Checking inside a module is expected to last only until the module ends, and the global flag is restored, but the universe graph keeps its own copy which is left disabled. The two views then disagree: Test Universe Checking reports the check as enabled while the kernel continues to accept universe-inconsistent terms. With the constraint between two universes no longer enforced, Hurkens' paradox applies and yields a proof of False, from which any proposition follows. The proof uses no axioms, plugins or unsafe features once the module has closed, and Print Assumptions reports it as closed under the global context, so neither the assumption audit nor the flag query reflects the actual kernel state. No fix is available.

CVSS 4.0 · 6.8 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-73565

@hono/node-server: Unauthenticated memory-leak DoS via aborted WebSocket handshake

@hono/node-server allows running the Hono application on Node.js. From 2.0.0 until 2.0.10, a WebSocket upgrade request to an upgradeWebSocket route with a missing or malformed Sec-WebSocket-Key header causes src/websocket.ts to retain the request's IncomingMessage in waiterMap and leave waitForWebSocket pending because ws.handleUpgrade emits no connection event. The aborted handshake therefore has no cleanup path, allowing an unauthenticated attacker to flood a public route, cause unbounded memory growth, and eventually make the service unavailable. This issue is fixed in version 2.0.10.

CVSS 3.1 · 5.3 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-98471

KVM: SEV: Do cache maintenance on the source VM during intra-host migration

In the Linux kernel, the following vulnerability has been resolved: KVM: SEV: Do cache maintenance on the source VM during intra-host migration Manually perform cache maintenance on the source VM during intra-host migration to ensure no stale data is left in CPU caches after the VM is destroyed. Because the source VM is "converted" to a non-SEV VM, KVM's memory reclaim flows won't trigger cache maintenance, e.g. when all guest memory is reclaimed in response to detaching from the mmu_notifier. Note, relying on the destination VM to do cache maintenance isn't an option as KVM doesn't require identical guest memory configurations, i.e. the source VM may have access to memory that the destination VM does not. Enforcing equivalent memory configurations is infeasible, as it would require a *deep* comparison of memslots, e.g. to verify that not only are the memslot identical, but what the memslots point at is also identical.

CVSS 3.1 · 7.1 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-17525

My Control System 26.5 – Disk space exhaustion due to incorrect temporary file cleanup after XML conversion

Incomplete cleanup vulnerability in ABB My Control System. This issue affects My Control System: 26.4 and 26.5.

CVSS 4.0 · 5.1 Medium EPSS < 1% KEV · Not listed
Vendors
Abb
CVE-2026-113658

ApostropheCMS: Unauthenticated CSV import requests leave rejected uploads in the system temporary directory

ApostropheCMS is an open-source Node.js content management system. Prior to 4.33.0, the unauthenticated Rich Text CSV conversion route writes a multipart upload to the system temporary directory before checking its extension and does not remove the staged file when that validation rejects it. Repeated large rejected uploads, using the normal public CSRF cookie, can persistently consume temporary-disk capacity and may disrupt ApostropheCMS and other services that depend on the same partition. This issue is fixed in version 4.33.0.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-98615

eth: fbnic: Set AW_FLUSH_MODE alongside AW_FLUSH when flushing the mailbox

In the Linux kernel, the following vulnerability has been resolved: eth: fbnic: Set AW_FLUSH_MODE alongside AW_FLUSH when flushing the mailbox When tearing down the FW mailbox Rx ring, fbnic_mbx_reset_desc_ring() writes AW_CFG with FLUSH set and everything else, BME included, cleared. Clearing BME halts the device's writes to the host but leaves the staged requests parked in the PUL write pipeline rather than draining them, so on the write path FLUSH alone never terminates the outstanding requests and the flush the firmware waits on never completes. Add the FLUSH_MODE definition and set both bits so the staged writes drain out of the pipeline on their own. BME stays cleared, so nothing lands on the host; it is restored later in fbnic_mbx_init_desc_ring() when the ring is rebuilt, once the outstanding writes are gone. The read path is unaffected. AR_CFG has no equivalent mode bit and AR_FLUSH terminates the outstanding reads by itself, so it is left as is. Both writes remain plain stores rather than read-modify-writes. That is deliberate: the matching write in fbnic_mbx_init_desc_ring() restores BME and the TLP attributes, and clears both flush bits as a side effect.

CVSS 3.1 · 4.4 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-98691

thunderbolt: Tear down inactive DP tunnels when the domain is stopped

In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Tear down inactive DP tunnels when the domain is stopped tb_stop() only tears down DMA tunnels so a DP tunnel that is still waiting for dprx_work to complete keeps that work queued while the routers are removed and the control channel is stopped. The work only stops once the DPRX timeout has passed and because it requeues itself until then the flush_workqueue() in tb_domain_remove() won't wait for its final run. The callback then runs against a domain that is already torn down. A reference to that domain is kept so the completion waiting for that domain to disappear in unbind will block until the timeout is eventually reached. Tear down DP tunnels that are not active yet as well which also cancels that work. Tunnels for displays that are already alive are untouched and keep working.

CVSS 3.1 · 1.9 Low EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-67442

FUXA Business Logic Flaw: Role Deletion Without User Assignment Cleanup

FUXA is a web-based Process Visualization (SCADA/HMI/Dashboard) software. Prior to 1.3.3, DELETE /api/roles removes role definitions through server/runtime/users/usrstorage.js but does not remove the deleted role identifier from each user's info.roles array or the runtime usersMap cache. If a permission configuration still references that identifier, an affected user can retain authorization rights that an administrator intended to revoke, causing residual privilege, inconsistent access-control state, and misleading audit results. This issue is fixed in version 1.3.3.

CVSS 3.1 · 2 Low EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-110008

@fastify/oauth2 vulnerable to Login CSRF via OAuth state cookie not cleared after callback

@fastify/oauth2 is a Fastify wrapper for OAuth2 login flows. In versions 7.2.0 through 8.3.1, the state and code-verifier cookies are set without a Path attribute at a login route with two or more path segments, while the clearing step at the OAuth callback writes them with a root path, so the original cookies survive the callback and the documented single-use guarantee for the state value does not hold. A state value an attacker learns stays valid for the rest of the browser session, letting the attacker drive their own authorization flow in the victim's browser and sign the victim in to the attacker's account (login CSRF). The issue is fixed in @fastify/oauth2 8.3.2, and users should upgrade to 8.3.2 or later. As a workaround, set an explicit cookie path so the set and the clear name the same cookie.

CVSS 3.1 · 4.2 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-97997

virtio_ring: fix stale descriptor flags after a failed packed add

In the Linux kernel, the following vulnerability has been resolved: virtio_ring: fix stale descriptor flags after a failed packed add In a packed ring the AVAIL and USED bits sit in the descriptor itself, so writing them makes that descriptor available. Those bit combinations flip meaning on every round of the ring, tracked by a wrap counter, so invalidating or validating a descriptor means inverting both bits. Commit 1ce9e6055fa0 ("virtio_ring: introduce packed ring support") has virtqueue_add_packed() make every descriptor of a chain available as it maps the chain, and write the head last. The device consumes the ring in order and stops at a head that is not available yet, so it never reaches the rest. When vring_map_one_sg() fails partway, unmap_release unmaps the segments and restores avail_used_flags, but the descriptors it wrote to in the ring stay marked with AVAIL and USED bits. The head is now the only entry that keeps the device from consuming these stale entries. For example, the ring would look like this now. Z - pre-previous command A - previous command B - aborted command C - current command [A1 DONE] [A2 DONE] <C1 EMPTY> [B2] [B3] [Z1 DONE] When the driver now attempts to issue the C command, the next add starts at the same head as B. If C spans less descriptors than B, there is no end marker because AVAIL and USED bits were still in place. And that means the device will start interpreting these stale entries (B2/B3) as another command entry, which then blocks the queue. This effect typically happens in swiotlb configurations under memory pressure, because vring_map_one_sg() can then fail with larger I/O requests which then leads to command abortions. There are broadly 2 ways to avoid leaving those flags behind: 1) Defer those flags too until the chain is complete. 2) Rewrite those flags for the previous wrap counter. Implement the second option in both packed add paths. The first option traverses the chain a second time on every successful add. The second option invalidates all added descriptors when any add fails. With this patch applied, a packed virtqueue keeps completing requests after a failed add.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-63998

ethtool: module: call ethnl_ops_complete() on module flash errors

In the Linux kernel, the following vulnerability has been resolved: ethtool: module: call ethnl_ops_complete() on module flash errors When validate() fails we are skipping over ethnl_ops_complete() even tho we already called ethnl_ops_begin().

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2024-57975

btrfs: do proper folio cleanup when run_delalloc_nocow() failed

In the Linux kernel, the following vulnerability has been resolved: btrfs: do proper folio cleanup when run_delalloc_nocow() failed [BUG] With CONFIG_DEBUG_VM set, test case generic/476 has some chance to crash with the following VM_BUG_ON_FOLIO(): BTRFS error (device dm-3): cow_file_range failed, start 1146880 end 1253375 len 106496 ret -28 BTRFS error (device dm-3): run_delalloc_nocow failed, start 1146880 end 1253375 len 106496 ret -28 page: refcount:4 mapcount:0 mapping:00000000592787cc index:0x12 pfn:0x10664 aops:btrfs_aops [btrfs] ino:101 dentry name(?):"f1774" flags: 0x2fffff80004028(uptodate|lru|private|node=0|zone=2|lastcpupid=0xfffff) page dumped because: VM_BUG_ON_FOLIO(!folio_test_locked(folio)) ------------[ cut here ]------------ kernel BUG at mm/page-writeback.c:2992! Internal error: Oops - BUG: 00000000f2000800 [#1] SMP CPU: 2 UID: 0 PID: 3943513 Comm: kworker/u24:15 Tainted: G OE 6.12.0-rc7-custom+ #87 Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: QEMU KVM Virtual Machine, BIOS unknown 2/2/2022 Workqueue: events_unbound btrfs_async_reclaim_data_space [btrfs] pc : folio_clear_dirty_for_io+0x128/0x258 lr : folio_clear_dirty_for_io+0x128/0x258 Call trace: folio_clear_dirty_for_io+0x128/0x258 btrfs_folio_clamp_clear_dirty+0x80/0xd0 [btrfs] __process_folios_contig+0x154/0x268 [btrfs] extent_clear_unlock_delalloc+0x5c/0x80 [btrfs] run_delalloc_nocow+0x5f8/0x760 [btrfs] btrfs_run_delalloc_range+0xa8/0x220 [btrfs] writepage_delalloc+0x230/0x4c8 [btrfs] extent_writepage+0xb8/0x358 [btrfs] extent_write_cache_pages+0x21c/0x4e8 [btrfs] btrfs_writepages+0x94/0x150 [btrfs] do_writepages+0x74/0x190 filemap_fdatawrite_wbc+0x88/0xc8 start_delalloc_inodes+0x178/0x3a8 [btrfs] btrfs_start_delalloc_roots+0x174/0x280 [btrfs] shrink_delalloc+0x114/0x280 [btrfs] flush_space+0x250/0x2f8 [btrfs] btrfs_async_reclaim_data_space+0x180/0x228 [btrfs] process_one_work+0x164/0x408 worker_thread+0x25c/0x388 kthread+0x100/0x118 ret_from_fork+0x10/0x20 Code: 910a8021 a90363f7 a9046bf9 94012379 (d4210000) ---[ end trace 0000000000000000 ]--- [CAUSE] The first two lines of extra debug messages show the problem is caused by the error handling of run_delalloc_nocow(). E.g. we have the following dirtied range (4K blocksize 4K page size): 0 16K 32K |//////////////////////////////////////| | Pre-allocated | And the range [0, 16K) has a preallocated extent. - Enter run_delalloc_nocow() for range [0, 16K) Which found range [0, 16K) is preallocated, can do the proper NOCOW write. - Enter fallback_to_fow() for range [16K, 32K) Since the range [16K, 32K) is not backed by preallocated extent, we have to go COW. - cow_file_range() failed for range [16K, 32K) So cow_file_range() will do the clean up by clearing folio dirty, unlock the folios. Now the folios in range [16K, 32K) is unlocked. - Enter extent_clear_unlock_delalloc() from run_delalloc_nocow() Which is called with PAGE_START_WRITEBACK to start page writeback. But folios can only be marked writeback when it's properly locked, thus this triggered the VM_BUG_ON_FOLIO(). Furthermore there is another hidden but common bug that run_delalloc_nocow() is not clearing the folio dirty flags in its error handling path. This is the common bug shared between run_delalloc_nocow() and cow_file_range(). [FIX] - Clear folio dirty for range [@start, @cur_offset) Introduce a helper, cleanup_dirty_folios(), which will find and lock the folio in the range, clear the dirty flag and start/end the writeback, with the extra handling for the @locked_folio. - Introduce a helper to clear folio dirty, start and end writeback - Introduce a helper to record the last failed COW range end This is to trace which range we should skip, to avoid double unlocking. - Skip the failed COW range for the e ---truncated---

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Products