Search vulnerabilities

Results 2,023

Export CSV
CVE-2026-71456

Hard‑coded Cryptographic Key Enables Padding Oracle Attack in Kantech Entrapass

Use of hard-coded cryptographic key vulnerability in Johnson Controls Kantech Entrapass allows Padding Oracle Crypto Attack. This issue affects Kantech Entrapass: before 9.20.

CVSS 4.0 · 8.5 High EPSS < 1% KEV · Not listed
Vendors
CVE-2026-109140

Krill login-session tokens reuse their encryption nonce across restarts, so any user who can log in can forge an "admin" token

The vulnerability is that Krill encrypts every login-session token with a nonce built from a counter that is reset to 0 on every Krill restart, so the same (key, nonce) pair is used again after each restart.

CVSS 3.1 · 8.4 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2021-2351

Vulnerability in the Advanced Networking Option component of Oracle Database Server. Supported versions that are affected are 12.1.0.2, 12.2.0.1 and 19c. Difficult to exploit vulnerability allows unauthenticated attacker with network access via Oracle Net to compromise Advanced Networking Option. Successful attacks require human interaction from a person other than the attacker and while the vulnerability is in Advanced Networking Option, attacks may significantly impact additional products. Successful attacks of this vulnerability can result in takeover of Advanced Networking Option. Note: The July 2021 Critical Patch Update introduces a number of Native Network Encryption changes to deal with vulnerability CVE-2021-2351 and prevent the use of weaker ciphers. Customers should review: "Changes in Native Network Encryption with the July 2021 Critical Patch Update" (Doc ID 2791571.1). CVSS 3.1 Base Score 8.3 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:R/S:C/C:H/I:H/A:H).

CVSS 3.1 · 8.3 High EPSS 2.4% KEV · Not listed
Vendors
CVE-2019-1543

ChaCha20-Poly1305 with long nonces

ChaCha20-Poly1305 is an AEAD cipher, and requires a unique nonce input for every encryption operation. RFC 7539 specifies that the nonce value (IV) should be 96 bits (12 bytes). OpenSSL allows a variable nonce length and front pads the nonce with 0 bytes if it is less than 12 bytes. However it also incorrectly allows a nonce to be set of up to 16 bytes. In this case only the last 12 bytes are significant and any additional leading bytes are ignored. It is a requirement of using this cipher that nonce values are unique. Messages encrypted using a reused nonce value are susceptible to serious confidentiality and integrity attacks. If an application changes the default nonce length to be longer than 12 bytes and then makes a change to the leading bytes of the nonce expecting the new value to be a new unique nonce then such an application could inadvertently encrypt messages with a reused nonce. Additionally the ignored bytes in a long nonce are not covered by the integrity guarantee of this cipher. Any application that relies on the integrity of these ignored leading bytes of a long nonce may be further affected. Any OpenSSL internal use of this cipher, including in SSL/TLS, is safe because no such use sets such a long nonce value. However user applications that use this cipher directly and set a non-default nonce length to be longer than 12 bytes may be vulnerable. OpenSSL versions 1.1.1 and 1.1.0 are affected by this issue. Due to the limited scope of affected deployments this has been assessed as low severity and therefore we are not creating new releases at this time. Fixed in OpenSSL 1.1.1c (Affected 1.1.1-1.1.1b). Fixed in OpenSSL 1.1.0k (Affected 1.1.0-1.1.0j).

CVSS 3.0 · 7.4 High EPSS 5.7% KEV · Not listed
Vendors
CVE-2026-110474

Hardcoded API Key Vulnerability in CreditNirvana Agentic AI Call Centre application

This vulnerability exists in the CreditNirvana Agentic AI Call Centre application due to hardcoded static API Key in the client side JavaScript bundle. An unauthenticated remote attacker could exploit this vulnerability by downloading client side JavaScript files and extracting API key, which could lead to make arbitrary API calls to retrieve call transcripts and recordings through the application API of the targeted system.

CVSS 4.0 · 8.7 High EPSS < 1% KEV · Not listed
Vendors
CVE-2026-120209

AJ-Report through 1.7.1 Authentication Bypass leading to RCE via Share-Token

AJ-Report through 1.7.1 signs share tokens with a hard-coded JWT secret, allowing attackers to forge valid Share-Tokens offline. Attackers can mint a token with reportCode 'dataSet' to access the testTransform endpoint, which passes scripts to GroovyClassLoader for unauthenticated remote code execution.

CVSS 4.0 · 9.3 Critical EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-112345

TTLock Android App < 9.8.260718 Hardcoded BLE Pairing Key Exposure

TTLock Android application before v9.8.260718 and associated smart-lock firmware contain a hardcoded static AES key vulnerability that allows an attacker within Bluetooth range to decrypt the per-pairing session key transmitted during BLE pairing. Attackers can observe the pairing exchange, recover the persistent session key using the embedded defaultKey, and forge authenticated BLE requests to unlock the device, add fingerprints or access codes, and perform administrative actions without authentication or user interaction.

CVSS 4.0 · 8.6 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-61737

ng-antd-admin: Hardcoded JWT Secret allows Authentication Bypass in ng-antd-admin

ng-antd-admin is an Angular and NestJS administration system template. Prior to 22.0, a hardcoded default `JWT` secret permits token forgery when a deployment has not replaced the default secret, without a startup warning. An attacker can bypass authentication and authorization, impersonate any user including administrators, and access protected API endpoints, leading to account takeover, data leakage and unauthorized operations. Version 22.0 rejects the shipped secret in production but permits it with a warning in non-production environments.

CVSS 3.1 · 9.8 Critical EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2025-62839

Hard-coded Cryptographic Key #1

An use of hard-coded cryptographic key vulnerability has been reported to affect HBS 3 Hybrid Backup Sync and Hybrid Backup Sync. If exploited, the vulnerability could allow remote attackers to compromise the security of the system. We have already fixed the vulnerability in the following version: HBS 3 Hybrid Backup Sync 26.4.0.521 and later Hybrid Backup Sync 26.4.0.521 and later Hybrid Backup Sync 26.4.1.563 and later

CVSS 4.0 · 8.7 High EPSS < 1% KEV · Not listed
CVE-2025-62841

Hard-coded Cryptographic Key #2

An use of hard-coded cryptographic key vulnerability has been reported to affect HBS 3 Hybrid Backup Sync and Hybrid Backup Sync. If exploited, the vulnerability could allow remote attackers to compromise the security of the system. We have already fixed the vulnerability in the following version: HBS 3 Hybrid Backup Sync 26.4.0.521 and later Hybrid Backup Sync 26.4.0.521 and later Hybrid Backup Sync 26.4.1.563 and later

CVSS 4.0 · 8.7 High EPSS < 1% KEV · Not listed
CVE-2026-114616

Authlib accepts an empty HMAC key, allowing JWS/JWT signature forgery (HS256/HS384/HS512)

Authlib is a Python library which builds OAuth and OpenID Connect servers. Prior to 1.9.1, Authlib's OctKey.import_key() and HMAC signing and verification path accept zero-length key material. If an application's secret lookup can return an empty string or empty bytes, a remote attacker can compute the deterministic HS256, HS384, or HS512 signature for arbitrary token claims and have Authlib treat the token as authentic. This issue is fixed in version 1.9.1.

CVSS 3.1 · 7.4 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-94423

Net::LibSSH versions before 0.004 for Perl authenticate to an unverified server because connect never checks the host key against known_hosts

Net::LibSSH versions before 0.004 for Perl authenticate to an unverified server because connect never checks the host key against known_hosts. connect reports success as soon as ssh_connect returns SSH_OK. libssh leaves the known-hosts check to the application, and this binding never makes it, so the strict_hostkeycheck and knownhosts options are set on the session and then decide nothing. Password, agent and public-key authentication, channel and SFTP operations all run on a session whose peer was never identified, so an attacker who can redirect the connection receives the password when password authentication is used, and commands and data sent over the session.

CVSS 3.1 · 9.1 Critical EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-89052

Hardcoded AES encryption key in Archer C6

A hardcoded cryptographic key management vulnerability exists in Archer C6 due to the use of a universal cryptographic key shared across devices. An attacker who obtains an encrypted configuration file or other protected credential data can recover plaintext credentials.  Successful exploitation may allow unauthorized disclosure of sensitive information, including administrative credentials.

CVSS 4.0 · 5.9 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-94140

Rex versions through 1.16.1 for Perl accept an unknown SSH host key for remote rsync transfers because sync hardcodes StrictHostKeyChecking=no

Rex versions through 1.16.1 for Perl accept an unknown SSH host key for remote rsync transfers because sync hardcodes StrictHostKeyChecking=no. Every remote branch of sync builds its ssh command with that option, for password authentication, for private-key authentication and for the fallback. The ssh options a caller sets through set_openssh_opt reach the OpenSSH transport but not this command, so there is no configuration that restores host key checking for the transfer. An attacker who can redirect the connection before the real host key is known presents their own and the transfer proceeds: under password authentication sync sends the connection password to that server, an upload writes the selected local files to it, and a download writes what it returns to the local destination.

CVSS 3.1 · 9.1 Critical EPSS < 1% KEV · Not listed
Vendors
—
Products
—
CVE-2026-76298

Use of Hard-coded Cryptographic Key in the PostgreSQL Sidecar Service in Splunk Enterprise

In Splunk Enterprise versions below 10.4.4 and 10.2.8, a user who does not hold the "admin" or "power" Splunk roles could derive the PostgreSQL sidecar database superuser password and run arbitrary operating system commands as the user account running Splunk Enterprise on search head cluster members. The vulnerability is possible because the PostgreSQL sidecar service derives a privileged database password from the search head cluster identifier that appears in search job logs. For more information see About configuring role-based user access (https://help.splunk.com/en/splunk-enterprise/administer/manage-users-and-security/10.2/manage-splunk-platform-users-and-roles/about-configuring-role-based-user-access), server.conf (https://help.splunk.com/en/splunk-enterprise/administer/admin-manual/10.2/configuration-file-reference/10.2.0-configuration-file-reference/server.conf), and Sidecar configuration settings (https://help.splunk.com/en/splunk-enterprise/administer/admin-manual/10.4/splunk-sidecars/sidecar-configuration-settings) in the Splunk documentation.

CVSS 3.1 · 8.8 High EPSS < 1% KEV · Not listed
Vendors
CVE-2026-98805

tipc: prevent GCM nonce reuse on peer key changes

In the Linux kernel, the following vulnerability has been resolved: tipc: prevent GCM nonce reuse on peer key changes TIPC can encrypt traffic between nodes using a different transmit key for each node. In this mode, the AES-GCM nonce for a packet sent to a known peer consists of a 32-bit prefix (a per-key salt XOR the peer's address) followed by a 64-bit counter. That counter is stored in the peer's RX crypto object. When the peer reports a change in which key it uses to receive packets, TIPC resets this counter. The sender can still be using the same TX key and salt, so subsequent packets reuse earlier nonces. This nonce reuse breaks confidentiality and exposes GCM's authentication key. This makes forgeries trivial: an attacker can exploit CTR malleability to alter captured ciphertexts and use the recovered authentication key to compute a valid tag for the modified ciphertext, under the same key and nonce. Use the TX key's existing aead->seqno counter instead. All encryptions using that key object share the same atomic counter, so concurrent encryptions get distinct nonce counter values. The counter survives key activation and peer reconnection, and peer key-status reports cannot reset it. This prevents those transitions from causing nonce reuse while the same TX key remains installed. The nonce format is unchanged, and receivers do not require consecutive counter values, so sharing the counter across peers remains compatible with existing receivers. A pre-existing check still invokes key revocation in the unlikely event that the counter wraps to zero.

CVSS 3.1 · 7.4 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-116054

SH3 Módulo de Gestão/Módulo de Arrecadação weak password hash

A security vulnerability has been detected in SH3. This affects an unknown function of the component Módulo de Gestão/Módulo de Arrecadação. The manipulation leads to password hash with insufficient computational effort. The attack is possible to be carried out remotely. A high degree of complexity is needed for the attack. The exploitability is reported as difficult. The exploit has been disclosed publicly and may be used. Upgrading to version 2026.0.2.0 mitigates this issue. Upgrading the affected component is recommended.

CVSS 4.0 · 2.1 Low EPSS < 1% KEV · Not listed
Vendors
Sh3
Products
Sh3
CVE-2026-100413

SeaweedFS: Hard-coded SSH host key can be presented by certain standalone SFTP Helm deployments

SeaweedFS is a distributed storage system for files and blobs. From 4.0.388 until 4.41, the SFTP Helm chart embedded one unencrypted Ed25519 private host key in k8s/charts/seaweedfs/templates/sftp/sftp-secret.yaml as stringData.seaweedfs_sftp_ssh_private_key. A standalone deployment presented that public key when sftp.enabled and sftp.enableAuth were true, sftp.existingConfigSecret was not supplied, the legacy sftp.sshPrivateKey path remained selected, a valid config-ssh Secret allowed startup, and hostKeysFolder did not provide a later Ed25519 signer. An attacker able to redirect or intercept client traffic could impersonate that SFTP endpoint to clients that trusted the published host identity, exposing password credentials or data sent to the rogue endpoint. Default all-in-one and non-authenticated standalone paths did not load the key. This issue is fixed in version 4.41.

CVSS 4.0 · 7 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-86384

Use of Hard‑coded Cryptographic Key Leading to Credential Exposure

Dell PowerProtect Data Domain, Feature Release versions 7.7.1.0 through 8.8, LTS2024 release versions 7.13.1.0 through 7.13.1.80, LTS2025 release versions 8.3.1.0 through 8.3.1.40, LTS2026 release versions 8.6.1.0 through 8.6.1.20, contain an Use of Hard-coded Cryptographic Key vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to credential exposure. The credentials may be used to access the system with privileges of the compromised user.

CVSS 3.1 · 9.8 Critical EPSS < 1% KEV · Not listed
Vendors
CVE-2026-117564

nest-admin before 1.0.1 Authentication Bypass via Hardcoded JWT Secret

nest-admin before 1.0.1 contains an authentication bypass vulnerability that allows unauthenticated attackers to forge administrator tokens by using a hardcoded JWT_SECRET committed in .env.production. Attackers can sign tokens with the known secret that JwtStrategy and RbacGuard trust, impersonating any user ID or claiming the admin role for full administrative access.

CVSS 4.0 · 9.3 Critical EPSS < 1% KEV · Not listed
Vendors
Products