Export limit exceeded: 428556 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.

Export limit exceeded: 428556 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.

Search vulnerabilities

Results 12,116

Export CSV
CVE-2026-64527

drm/hyperv: validate VMBus packet size in receive callback

In the Linux kernel, the following vulnerability has been resolved: drm/hyperv: validate VMBus packet size in receive callback hyperv_receive_sub() reads msg->vid_hdr.type and dispatches into one of four message-type branches without knowing how many bytes the host wrote into hv->recv_buf. The completion path then runs memcpy(hv->init_buf, msg, VMBUS_MAX_PACKET_SIZE), so the consumer that wakes on wait_for_completion_timeout() can read up to 16 KiB of residue from a prior message as if it were the response payload. Pass bytes_recvd into hyperv_receive_sub() and reject any packet that does not cover the pipe + synthvid header. A single switch on msg->vid_hdr.type then computes the type-specific payload size: the three completion-driving types (SYNTHVID_VERSION_RESPONSE, SYNTHVID_RESOLUTION_RESPONSE, SYNTHVID_VRAM_LOCATION_ACK) fall through to a shared exit that requires that size before memcpy/complete, while SYNTHVID_FEATURE_CHANGE validates its own payload and returns before reading is_dirt_needed. Unknown types are dropped. SYNTHVID_RESOLUTION_RESPONSE is variable length: the host fills resolution_count entries, not the full SYNTHVID_MAX_RESOLUTION_COUNT array. Validate the fixed prefix first so resolution_count can be read, bound it against the array, then require only the count-sized array, so the shorter responses the host actually sends are accepted. Only run the sub-handler when vmbus_recvpacket() returned success. The memcpy length is bytes_recvd, which is bounded by VMBUS_MAX_PACKET_SIZE only on a successful receive; on -ENOBUFS vmbus_recvpacket() instead reports the required length, which can exceed hv->recv_buf, so copying bytes_recvd would read and write past the 16 KiB buffers. Gating on the success return keeps the copy bounded. The nonzero-return path is itself a malformed-message case and is now logged rather than silently skipped; channel recovery is not attempted. Rejected packets are reported via drm_err_ratelimited() rather than silently dropped, matching the CoCo-hardened pattern in hv_kvp_onchannelcallback().

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-106428

Out-of-bounds read in SCRAM response parsing in MongoDB C Driver

An out-of-bounds read in SCRAM authentication response parsing in the MongoDB C Driver can read one byte beyond a fixed-size buffer when processing a malformed server-final message. A server or network intermediary able to provide this message before server-signature verification can cause the application using the driver to terminate. The extra byte is not returned through the protocol.

CVSS 4.0 · 6.3 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-64550

net: qualcomm: rmnet: validate MAP frame length before ingress parsing

In the Linux kernel, the following vulnerability has been resolved: net: qualcomm: rmnet: validate MAP frame length before ingress parsing When ingress deaggregation is disabled, rmnet_map_ingress_handler() passes the skb straight to __rmnet_map_ingress_handler(), skipping the length validation that rmnet_map_deaggregate() performs on the aggregated path. The parser then dereferences the MAP header and csum header/trailer based on the on-wire pkt_len without checking skb->len, so a short frame is read out of bounds: BUG: KASAN: slab-out-of-bounds in rmnet_map_checksum_downlink_packet Read of size 1 at addr ffff88801118ed00 by task exploit/147 Call Trace: ... rmnet_map_checksum_downlink_packet (drivers/net/ethernet/qualcomm/rmnet/rmnet_map_data.c:413) __rmnet_map_ingress_handler (drivers/net/ethernet/qualcomm/rmnet/rmnet_handlers.c:96) rmnet_rx_handler (drivers/net/ethernet/qualcomm/rmnet/rmnet_handlers.c:129) __netif_receive_skb_core.constprop.0 (net/core/dev.c:6089) netif_receive_skb (net/core/dev.c:6460) tun_get_user (drivers/net/tun.c:1955) tun_chr_write_iter (drivers/net/tun.c:2001) vfs_write (fs/read_write.c:688) ksys_write (fs/read_write.c:740) do_syscall_64 (arch/x86/entry/syscall_64.c:94) ... Factor that validation out of rmnet_map_deaggregate() into rmnet_map_validate_packet_len() and run it on the no-aggregation path too. The MAP header is bounds-checked first, since this path can receive a frame shorter than the header.

CVSS 3.1 · 7.3 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-64549

Bluetooth: bpa10x: avoid OOB read of revision string in bpa10x_setup()

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: bpa10x: avoid OOB read of revision string in bpa10x_setup() bpa10x_setup() sends the vendor command 0xfc0e and passes the response to bt_dev_info() and hci_set_fw_info() as a "%s" string starting at skb->data + 1, without checking the length: bt_dev_info(hdev, "%s", (char *)(skb->data + 1)); hci_set_fw_info(hdev, "%s", skb->data + 1); A device that returns a one-byte response (status only) leaves skb->data + 1 past the end of the data, and the %s walk reads adjacent slab memory until it meets a NUL. The same happens when the payload is not NUL-terminated within skb->len. The out-of-bounds bytes end up in the kernel log and the firmware-info debugfs file. Print the revision string with a bounded "%.*s" limited to skb->len - 1 instead. This keeps the string readable for well-behaved devices while never reading past the received data, and does not fail setup, so a device returning a short or unterminated response keeps working.

CVSS 3.1 · 7.1 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-93671

Out-of-bounds read logging a mismatched Sec-WebSocket-Accept header in the Zephyr websocket client

The websocket client's HTTP header callback on_header_value() in subsys/net/lib/websocket/websocket.c receives the Sec-WebSocket-Accept header value as a pointer/length pair from the HTTP parser. The referenced bytes live inside the application-supplied receive buffer and are not NUL terminated. When the received value did not match the expected accept key, the pointer was passed directly to a %s conversion in a NET_DBG() call, so the logging code measured the string with strlen() and read on past the end of the header value looking for a terminator. The value is supplied by the peer during the WebSocket handshake, before any application-level authentication, so a malicious or man-in-the-middle server reached over a ws:// (or otherwise attacker-terminated) connection can trigger the mismatch branch at will simply by answering with a wrong accept key. By sizing the response so the header value ends at the tail of the buffer passed to websocket_connect() as wreq->tmp_buf, the peer can make the scan run off the end of that buffer and into adjacent memory. The defective log statement is compiled in only when websocket debug logging is enabled (CONFIG_NET_WEBSOCKET_LOG_LEVEL_DBG=y, or CONFIG_LOG_DEFAULT_LEVEL=4); it is absent from a default build, which bounds exposure to diagnostic configurations. The consequence is an out-of-bounds read whose contents are emitted to the log stream: memory adjacent to the receive buffer is disclosed wherever the device's logs are collected or displayed. On targets where the memory following the buffer is not mapped, the scan can instead fault and terminate the connection or thread. No out-of-bounds write occurs, so there is no integrity impact. The fix copies at most sizeof(got) - 1 bytes of the parser-provided slice into a bounded stack buffer, NUL terminates the copy, and logs that instead, so the formatter never reads beyond the bytes the parser actually offered.

CVSS 3.1 · 3.7 Low EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-107901

Out‑of‑Bounds Read in TELLUS Allows Information Exposure or Remote Code Execution

TELLUS and TELLUS Lite provided by FUJI ELECTRIC CO., LTD. contain an out-of-bounds read vulnerability. Opening a specially crafted V9 file may lead to information exposure or arbitrary code execution on the affected product.

CVSS 4.0 · 6.8 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-101933

Out-of-bounds write when loading protected Basic libraries

LibreOffice documents can contain Basic macro libraries. A library protected by a password is stored in the document in a compiled form, which may be read when the document is loaded. An out-of-bounds write existed when the compiled form was read, because the positions of its strings were not checked against the size of the data they refer to, and a type found by name was not checked to be of the right kind. In fixed versions these positions are checked, a library that fails the check is not loaded, and a type of the wrong kind is ignored.

CVSS 4.0 · 5.4 Medium EPSS < 1% KEV · Not listed
Products
CVE-2024-21963

An out-of-bounds read vulnerability in the IOMMU could allow a malicious guest to corrupt hypervisor (HV) pages and potentially cause a host crash leading to loss of availability.

CVSS 4.0 · 6 Medium EPSS < 1% KEV · Not listed
Vendors
—
Products
—
CVE-2026-64571

wifi: p54: validate RX frame length in p54_rx_eeprom_readback()

In the Linux kernel, the following vulnerability has been resolved: wifi: p54: validate RX frame length in p54_rx_eeprom_readback() p54_rx_eeprom_readback() copies the requested EEPROM slice out of a device-supplied readback frame without checking that the skb actually holds that many bytes. Commit da1b9a55ff11 ("wifi: p54: prevent buffer-overflow in p54_rx_eeprom_readback()") closed the destination overflow by copying a fixed priv->eeprom_slice_size (and rejecting a mismatched advertised len), but the source side is still unbounded: nothing verifies the frame is long enough to supply that many bytes. A malicious USB device can send a short frame whose advertised len matches priv->eeprom_slice_size while the payload is truncated. The equality check passes and memcpy() reads past the end of the skb, leaking adjacent heap: BUG: KASAN: slab-out-of-bounds in p54_rx (drivers/net/wireless/intersil/p54/txrx.c:507) Read of size 1016 at addr ffff88800f077114 by task swapper/0/0 Call Trace: <IRQ> ... __asan_memcpy (mm/kasan/shadow.c:105) p54_rx (drivers/net/wireless/intersil/p54/txrx.c:507) p54u_rx_cb (drivers/net/wireless/intersil/p54/p54usb.c:163) __usb_hcd_giveback_urb (drivers/usb/core/hcd.c:1657) dummy_timer (drivers/usb/gadget/udc/dummy_hcd.c:2005) ... </IRQ> The buggy address belongs to the object at ffff88800f0770c0 which belongs to the cache skbuff_small_head of size 704 The buggy address is located 84 bytes inside of allocated 704-byte region [ffff88800f0770c0, ffff88800f077380) Check that the slice fits in the skb before copying.

CVSS 3.1 · 7.1 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-124023

Apache Axis2/C: Out-of-bounds read in the Guththila XML reader wrapper

Out-of-bounds Read vulnerability in the Guththila XML parser wrapper of Apache Axis2/C. On some malformed XML input the Guththila parser returned a raw input byte in place of an event code, and the AXIOM reader wrapper used that value as an index into a ten-entry lookup table without checking its range, reading heap memory past the end of the table. An unauthenticated client could trigger this by sending a crafted XML request to a server built with Guththila, the default parser, causing the request to be parsed incorrectly or, in some cases, the process to crash. The memory read is not returned to the client. This issue affects Apache Axis2/C: through 2.0.0. The fix is available in commits 23110287924e79d05a5b4712298c355d1f05c606 and f01683ec10e8fddb87279ec9351b3239021223e6 and will be included in the next release.

CVSS 3.1 · 9.1 Critical EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-126913

chromium-browser: chromium-browser: information disclosure via out-of-bounds read in compositing

Out of bounds read in Compositing in Google Chrome prior to 157.0.8103.78 allowed a remote attacker who had compromised the renderer process to read memory outside the sandbox via a crafted HTML page. (Chromium security severity: High)

CVSS 3.1 · 3.4 Low EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-98100

Out-of-bounds read in HWP picture import

LibreOffice can import documents in the HWP format, including pictures that link to an external file. An out-of-bounds read existed when the link target of a crafted picture was read, so memory past the picture data could end up in the converted document. In fixed versions the link target is taken only from the picture data.

CVSS 4.0 · 5.4 Medium EPSS < 1% KEV · Not listed
Products
CVE-2026-97894

Out-of-bounds read in UTF-16 text and DIF spreadsheet import

LibreOffice Calc can open spreadsheets in the DIF format, and text files such as CSV in the UTF-16 encoding. Both are read one line at a time. An out-of-bounds read existed when a line of a crafted file was read, because the length of the line could be miscalculated, so memory beyond the line could be copied into the imported document. In fixed versions each line is read up to its limit and no further.

CVSS 4.0 · 5.4 Medium EPSS < 1% KEV · Not listed
Products
CVE-2026-18566

Out-of-bounds read in EMF, EMF+ and WMF image import

LibreOffice can import EMF, EMF+ and WMF images, which may be embedded in documents. Several out-of-bounds reads existed in the readers for these formats, because sizes, counts and offsets taken from a crafted image were not checked against the data the image actually holds. In fixed versions these values are checked against the size of each record and the data that remains, and a record that fails the checks is not used.

CVSS 4.0 · 5.4 Medium EPSS < 1% KEV · Not listed
Products
CVE-2026-116312

PostgreSQL MERGE can place the wrong row in a trigger transition table

Inconsistent transition-capture state in PostgreSQL MERGE allows a table data modifier to make an AFTER trigger process the wrong new row, via a partitioned table MERGE that performs an INSERT before an UPDATE. Within major versions 15-18, minor versions before PostgreSQL 18.7, 17.12, 16.16, and 15.20 are affected. Versions before PostgreSQL 15 are unaffected.

CVSS 3.1 · 5.4 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-126841

chromium-browser: chromium-browser: Information disclosure via out-of-bounds read in Skia

Out of bounds read in Skia in Google Chrome prior to 157.0.8103.78 allowed a remote attacker who had compromised the renderer process to read memory outside the sandbox via a crafted HTML page. (Chromium security severity: High)

CVSS 3.1 · 3.1 Low EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-127916

MCUboot image hash span is not bounded against the slot, allowing a read past the flash area during image validation

bootutil_img_hash() computes the image digest over ih_hdr_size + ih_img_size + ih_protect_tlv_size bytes, all three taken from the candidate image's header, and reads that span out of the slot without checking that it fits in the flash area. The three sizes are also summed without an overflow check. Nothing earlier on the validation path bounds the whole span either: bootutil_img_validate() compares the image size against bootutil_max_image_size() only after the hash has been computed. The callers bound part of the span, or none of it: On the swap and overwrite upgrade path, boot_validate_slot() first runs the image header check (boot_is_header_valid(), later boot_check_header_valid()). Before MCUboot 2.2.0 that check covered only ih_hdr_size + ih_img_size, so for every image the protected-TLV area (ih_protect_tlv_size, a uint16_t, up to 65535 bytes) was hashed without being bounded. From 2.2.0 the check includes ih_protect_tlv_size, except for a compressed image in the secondary slot when MCUBOOT_DECOMPRESS_IMAGES (CONFIG_BOOT_DECOMPRESSION) is enabled, which leaves the same gap of up to 64 KB. Zephyr's single-slot and firmware loaders (boot/zephyr/single_loader.c, boot/zephyr/firmware_loader.c) read the header with boot_image_load_header(), which bounds ih_hdr_size + ih_img_size against the flash area. Before MCUboot 2.4.0 that bound did not include ih_protect_tlv_size, which leaves the same gap of up to 64 KB. From 2.4.0 these loaders bound the whole span. The serial recovery image-list and image-state handlers (bs_list() and bs_set() in boot/boot_serial/src/boot_serial.c) call bootutil_img_validate() with no header check at all, so on those paths ih_img_size is unbounded as well. The image is hashed before its signature is checked, so anyone who can place an image in a slot (an OTA or SMP update delivered through the application, or serial recovery) reaches this read before authentication. Whether a malformed header produces an actual read beyond the area depends on the flash backend: Backends whose flash_area_read() bounds-checks the request (Zephyr, Espressif, NuttX, Mbed) return an error once the chunked read crosses the end of the area. Validation fails and the image is rejected, with no over-read. With MCUBOOT_HASH_STORAGE_DIRECTLY (Zephyr CONFIG_BOOT_IMG_HASH_DIRECTLY_ON_STORAGE, available from 2.2.0, not enabled by default) the span is hashed through a single direct pointer into memory-mapped flash, with no bounds check. The Cypress PSoC6 port's flash_area_read() (boot/cypress/cy_flash_pal/cy_flash_map.c, from 1.6.0) does not bound the read: its assert()s compare against the area's absolute offset rather than its size, and it copies with memcpy(). The bytes read past the area feed only the digest, which is compared internally and never returned, so nothing is disclosed. The realistic effect is a read fault during image validation: up to 64 KB past the slot on the upgrade path and, before 2.4.0, on the Zephyr loaders, and potentially much further on the serial recovery handlers, which skip the header check. Where validation is repeated at every boot (a pending upgrade, or, before 2.4.0, the single-slot loader checking its image), the fault can recur on each reset and keep the device from booting. The fix makes bootutil_img_hash() add the three sizes with boot_u32_safe_add() and reject an image whose span, including the sector offset used in swap-using-offset mode, does not fit in the flash area, before any of it is hashed. Because the bound is applied where the bytes are read, it covers every caller.

CVSS 3.1 · 2.9 Low EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-127915

TLV iterator does not bound each entry against the declared TLV area in MCUboot bootutil

The MCUboot TLV iterator bootutil_tlv_iter_next() in boot/bootutil/src/tlv.c walks image trailer TLVs with a single loop guard (it->tlv_off < it->tlv_end) and advances by sizeof(struct image_tlv) + tlv.it_len using the attacker-controlled it_len field, without validating that the entry's header or payload stays within it->tlv_end. As a result the 4-byte header read can extend up to 3 bytes past the declared TLV area, and the returned (off, len) can describe a payload that runs past it. The path is pre-authentication: TLVs are parsed during bootutil_img_validate() before the signature is verified, and a crafted image can be presented through DFU / serial-recovery / OTA. However the impact is contained by surrounding guards: bootutil_img_validate() first rejects a TLV area larger than bootutil_max_image_size(), the default LOAD_IMAGE_DATA sink is flash_area_read() which bounds-checks against the flash partition and fails an out-of-partition read, and every payload consumer (EXPECTED_HASH_TLV, EXPECTED_KEY_TLV, EXPECTED_SIG_TLV, IMAGE_TLV_SEC_CNT) clamps len against a fixed buffer before copying. The residual effect in a default flash build is therefore an out-of-region read confined to the attacker's own slot partition whose result is never observable, yielding at worst a clean validation failure rather than memory corruption or information disclosure. A genuine (though still bounded) out-of-bounds read remains under the non-default MCUBOOT_RAM_LOAD configuration, where LOAD_IMAGE_DATA is an unchecked memcpy. The fix is to validate each entry's header and payload against it->tlv_end inside the iterator.

CVSS 3.1 · 2 Low EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-114469

Out-of-bounds Read in Git

Out-of-bounds read can crash git-apply(1) when binary patch inflates to very large size

CVSS 3.1 · 4.4 Medium EPSS < 1% KEV · Not listed
Vendors
Git
Products
Git
CVE-2026-19086

IBM i is Affected By Multiple Vulnerabilities in PASE [, ]

IBM i 7.6, 7.5, 7.4, and 7.3 could allow a denial of service as a result of a buffer overflow in a PASE process. An authenticated attacker could leverage this to terminate their own process.

CVSS 3.1 · 3.3 Low EPSS < 1% KEV · Not listed
Vendors
Ibm
Products
I