Export limit exceeded: 430052 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.

Search vulnerabilities

Results 29,561

Export CSV
CVE-2026-99754

scsi: target: Verify the iSCSI ISID is null-terminated

In the Linux kernel, the following vulnerability has been resolved: scsi: target: Verify the iSCSI ISID is null-terminated iscsi_parse_pr_out_transport_id() returns the ISID of a FORMAT CODE 01b TransportID as a pointer into the PERSISTENT RESERVE OUT parameter list, lowercased in place and never null-terminated. spc4r37 Table 508 requires the field to be null-terminated, but a non-conforming initiator can omit the NULL; when the ISID ends at the end of the received buffer, the pointer is not a C string. The registration code still consumes it as one: strcmp() in __core_scsi3_locate_pr_reg() and in the REGISTER AND MOVE path, and snprintf("%s") in __core_scsi3_do_alloc_registration(), which also reads its first 8 bytes unconditionally with get_unaligned_be64() - a NUL check does not bound that read. When the parameter list spans more than one page, transport_kmap_data_sg() maps it with vmap(), and the over-read walks off the end of the mapping into the vmalloc() guard page and oopses. Reproduced with a PR OUT REGISTER + SPEC_I_PT parameter list of exactly 8192 bytes whose final TransportID carries a 12-byte ISID without a terminating NUL: BUG: unable to handle page fault for address: ffffc9000138c000 RIP: 0010:strcmp+0xc/0x30 Call Trace: __core_scsi3_locate_pr_reg+0xd3/0x120 [target_core_mod] core_scsi3_decode_spec_i_port+0x8fc/0x13a0 [target_core_mod] core_scsi3_emulate_pro_register+0x73c/0x900 [target_core_mod] ... iscsi_target_rx_thread+0xef/0x1d0 [iscsi_target_mod] With a single-page parameter list the buffer is a kmap() direct mapping, so the over-read continues into the physically adjacent page instead of faulting. snprintf("%s") then copies whatever follows the ISID in memory into pr_reg_isid, and PR IN READ FULL STATUS reports the registration back to any initiator, turning the over-read into an info leak of kernel heap contents. Reproduced with a 4096-byte parameter list whose last TransportID ends at the end of the buffer with a 4-byte ISID and no NUL, interleaved with I/O to populate adjacent pages: the READ FULL STATUS response returned the ISID as "0xleak" followed by raw bytes that were not part of the parameter list. The snprintf() into pr_reg_isid[PR_REG_ISID_LEN] caps the echoed ISID at 15 characters, so at most 11 bytes past the buffer are leaked per command, but the PR OUT command is not rate limited. Any initiator that can send PR OUT to an iSCSI-exported LUN can trigger either variant, including a guest via vhost-scsi. Require 8 bytes to remain after the ",i,0x" separator, and a NUL inside the rest of the descriptor, before the ISID pointer is returned. REGISTER AND MOVE fails with TCM_INVALID_PARAMETER_LIST; on SPEC_I_PT no target port claims the malformed TransportID, and the command fails the same way.

CVSS 3.1 · 7.1 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-76415

A vulnerability in the Yoda'a Crytper (yC) Portable Executable (PE) unpacker of ClamAV could allow an unauthenticated, remote attacker to cause a DoS condition on an affected device. . This vulnerability is due to lack of proper error checking for negative values when processing the PE file to be unpacked. An attacker could exploit this vulnerability by sending a PE file to be unpacked. A successful exploit could allow the attacker to cause the ClamAV scanning process to terminate, resulting in a DoS condition on the affected software.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-76421

A vulnerability in the LZX data algorithm for Microsoft Compiled HTML Help (CHM) file scanning in ClamAV could allow an unauthenticated, remote attacker to cause a DoS condition on an affected device. This vulnerability is due to improper boundary checks when applying the LZX data algorithm to CHM files during the decoder stage, which may result in buffer overflow. An attacker could exploit this vulnerability by sending a crafted CHM file for scanning. A successful exploit could allow the attacker to cause the ClamAV scanning process to terminate, resulting in a DoS condition on the affected software.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99427

smb: client: fix OOB last_entry pointer from unbounded LastNameOffset

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix OOB last_entry pointer from unbounded LastNameOffset CIFSFindFirst() and CIFSFindNext() locate the last entry of a TRANS2_FIND_FIRST2 or TRANS2_FIND_NEXT2 response by adding the LastNameOffset of the response parameters to the start of the data area, and store the result in psrch_inf->last_entry. MS-CIFS 2.2.6.2.2 defines that offset as the offset of the entry's file name; the client follows the reading of NT and Samba servers, which point it at the entry. LastNameOffset is only checked against CIFSMaxBufSize, which says nothing about the response actually received: validate_t2() lets the data area start up to 1024 bytes into the buffer, and SendReceive() copies at most CIFSMaxBufSize + MAX_CIFS_HDR_SIZE bytes of a response, 16468 by default, into a cifs_request allocation of CIFSMaxBufSize + MAX_SMB2_HDR_SIZE bytes, 16588 by default. The pointer itself can therefore be placed anywhere from the end of the received data to 820 bytes past the end of the allocation. The read through that pointer is far larger than its displacement. find_cifs_entry() hands last_entry to cifs_save_resume_key() after every FindNext and after the FindFirst of a search rewind, and cifs_fill_dirent() takes the length of the name from the entry itself: a __le32 FileNameLength for most levels, a __u8 for SMB_FIND_FILE_INFO_STANDARD, and for SMB_FIND_FILE_UNIX the result of a scan for the terminating NUL over up to PATH_MAX + 1 UTF-16 units. The name is recorded as the resume name of the search, and the next CIFSFindNext() rejects only a recorded length of PATH_MAX or more before copying the name into the ResumeFileName of its request and sending it with the resume key taken from the same entry: up to 4 KiB of memory from past the end of the allocation leaks to the server, and for SMB_FIND_FILE_UNIX the NUL scan runs about twice as far before the length is even known. The entry does not have to lie outside the response for that either: a maximal response ends about 120 bytes before the end of the allocation, so an entry in its last bytes with a name just under PATH_MAX has nearly all of that name copied from past the allocation. It needs nothing unusual from the client: a FindNext response that reports no entries and does not end the search makes find_cifs_entry() send the next FindNext at once, carrying whatever was parsed at LastNameOffset, and a search rewind can do the same after its FindFirst. SMB1 is not negotiated by default: this takes a malicious or compromised server, a mount of it with an explicit vers=1.0, which CONFIG_CIFS_ALLOW_INSECURE_LEGACY (default y) permits, and a directory listing on that mount. With KASAN enabled, a response that places the last entry past the buffer, with a large DataOffset and a LastNameOffset near the end of its range, gives: ================================================================== BUG: KASAN: slab-out-of-bounds in cifs_save_resume_key.isra.0+0x7aa/0x7f0 Read of size 4 at addr ffff88807b55c33b by task ls/83 CPU: 1 UID: 0 PID: 83 Comm: ls Not tainted 7.3.0-rc4-00457-gf14572c203d5 #69 PREEMPT(lazy) Call Trace: <TASK> kasan_report+0xdf/0x1a0 cifs_save_resume_key.isra.0+0x7aa/0x7f0 cifs_readdir+0x1ed6/0x29c0 iterate_dir+0x1c0/0x570 __x64_sys_getdents64+0x133/0x270 do_syscall_64+0x109/0x5d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> Allocated by task 83 on cpu 0 at 19.317556s: cifs_buf_get+0x36/0x90 smb_init+0x4f/0x110 CIFSFindNext+0xf7/0x14c0 cifs_readdir+0xf51/0x29c0 The buggy address belongs to the object at ffff88807b558000 which belongs to the cache cifs_request of size 16588 The buggy address is located 623 bytes to the right of allocated 16588-byte region [ffff88807b558000, ffff88807b55c0cc) ================================================================== The four bytes read there are the FileNameLength of the entry, which cifs_fill_dirent() tak ---truncated---

CVSS 3.1 · 5.9 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99442

nvmem: core: Fix OOB read for bit offsets of more than one byte

In the Linux kernel, the following vulnerability has been resolved: nvmem: core: Fix OOB read for bit offsets of more than one byte When the bit offset is BITS_PER_BYTE or larger the read position is advanced by `bytes_offset`. This is not taken into account in the per-byte read loop which still reads `cell->bytes` resulting in an out of bounds read of `bytes_offset` bytes. The information read OOB does not leak directly as the erroneously read bits are cleared. Detected by KASAN while looking for a use-after-free in simplefb.c.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99448

ufs: use u64 for directory size in ufs_last_byte

In the Linux kernel, the following vulnerability has been resolved: ufs: use u64 for directory size in ufs_last_byte ufs1_read_inode() and ufs2_read_inode() copy the untrusted 64-bit on-disk size into inode->i_size. ufs_last_byte() then truncates that value to an unsigned int before calculating the valid extent of a directory folio. A directory size of exactly 4 GiB is truncated to zero. In ufs_find_entry(), subtracting the requested record length from that zero forms an endpoint almost 4 GiB beyond the mapped folio. A crafted UFS2 image produces: BUG: KASAN: use-after-free in ufs_find_entry+0x583/0x6e0 [ufs] Read of size 1 ... ufs_find_entry ufs_inode_by_name ufs_lookup __lookup_slow path_lookupat The KASAN classification reflects that the adjacent physical page was free; the source-level operation is an out-of-folio read. A controlled UFS1 test with CONFIG_UFS_FS_WRITE enabled also made ufs_find_entry() return a directory entry from an adjacent anonymous page. unlink() then passed that pointer to ufs_delete_entry(), which cleared the adjacent page's 3 2-bit d_ino. This write result reproduced three out of three times. UFS normally requires a privileged mount path. A relevant boundary is a privileged automounter or image-processing service handling an attacker-supplied filesystem. The write primitive additionally requires UFS1 to be mounted read-write with CONFIG_UFS_FS_WRITE enabled; the read is reachable with read-only UFS2. Keep the intermediate size arithmetic at 64 bits so non-final pages are bounded at PAGE_SIZE. With this change, the same controlled tests reach the real on-disk directory entry and produce no adjacent-page write or KASAN report. A reproducer and full validation logs are available on request. The vulnerable helper is present in v7.2-rc3, v7.1, v6.18.38, v6.12.95, v6.6.111, and upstream master at 1229e2e57a5c. Runtime reproduction and fix validation were performed in an x86-64 QEMU guest running v7.2-rc3 with generic KASAN.

CVSS 3.1 · 6.7 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-132231

In JetBrains TeamCity before 2026.1.3, 2025.11.7 remote code execution was possible via best-fit character mapping in Perforce settings

CVSS 3.1 · 9.9 Critical EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-129538

PHP-CGI out-of-bounds read and write during PATH_INFO correction

PHP-CGI out-of-bounds read and write during PATH_INFO correction. The PHP CGI binary (php-cgi), in CGI and FastCGI mode with cgi.fix_pathinfo enabled (the default), can perform an out-of-bounds read and write when the path removed from SCRIPT_FILENAME or PATH_TRANSLATED is longer than the supplied PATH_INFO, or when PATH_INFO is empty. This requires a web server mapping that passes such inconsistent values, or a FastCGI listener reachable by untrusted clients. An unauthenticated remote attacker can crash the process, may obtain process memory if the application exposes PATH_INFO or PATH_TRANSLATED, and may corrupt memory. PHP-FPM and the Apache module are not affected. This issue affects PHP versions before 8.2.36, 8.3.* before 8.3.37, 8.4.* before 8.4.28 and 8.5.* before 8.5.13.

CVSS 4.0 · 6.9 Medium EPSS 12.8% KEV · Not listed
Vendors
Products
CVE-2026-99486

rust: configfs: fix data offset calculation for subsystem callbacks

In the Linux kernel, the following vulnerability has been resolved: rust: configfs: fix data offset calculation for subsystem callbacks `get_group_data()` chooses between `Group::<Parent>::container_of()` and `Subsystem::<Parent>::container_of()` based on whether `this` represents the root group of a configfs subsystem. It detects this by checking `(*this).cg_subsys.is_null()`, but `link_group()` in `fs/configfs/dir.c` unconditionally sets `cg_subsys` for every `config_group` attached anywhere in a registered subsystem, including the subsystem's own `su_group`. The only `config_group` with a NULL `cg_subsys` is the configfs root, on which userspace cannot trigger callbacks. The check is therefore always false at runtime, and the `Subsystem` branch is dead. Subsystem-level callbacks reach the `Group` branch and may read `data` at the wrong offset. Thus change the `is_root` check to correctly identify whether a group is a root group by comparing `this` to `subsys.su_group`. [ Andreas: Fix clippy warning on 1.85.0 by moving safety comment. ]

CVSS 3.1 · 6.1 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99493

s390/zcrypt: Guard domain index uses against speculative bypass

In the Linux kernel, the following vulnerability has been resolved: s390/zcrypt: Guard domain index uses against speculative bypass The previous array_index_nospec() placement only covered the admin permission check, leaving ap_test_config_usage_domain() and ap_test_config_ctrl_domain() in the CCA path exposed to speculative execution. Move the sanitization to before all permission and config checks in both the CCA and EP11 paths. Hold the sanitized domain value in another variable so that the later use can choose to use either the original value (subject to speculative execution) or the sanitized value (which may in case of AUTOSEL_DOM reflect the wrong value). Before that, check the domain value to be either AUTOSEL_DOM or in range 0...AP_DOMAINS-1 and return with -EINVAL in case this check does not pass.

CVSS 3.1 · 4.7 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99494

s390/zcrypt: Fix out-of-bounds ptr advance in cca_query_crypto_facility()

In the Linux kernel, the following vulnerability has been resolved: s390/zcrypt: Fix out-of-bounds ptr advance in cca_query_crypto_facility() The FQ reply parser code blindly advanced the walk pointer by a length value read directly from the hardware reply payload without checking that the advance stayed within the allocated reply buffer. A corrupt or malicious device response could push ptr beyond the cprbmem region, causing an out-of-bounds dereference or kernel memory exposure via the subsequent memcpy(). Fix this by tracking the remaining reply buffer space in a variable and validating each device-supplied length field against it before advancing or dereferencing the pointer.

CVSS 3.1 · 6.1 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99495

s390/zcrypt: Fix and improve zcrypt reply message verification checks

In the Linux kernel, the following vulnerability has been resolved: s390/zcrypt: Fix and improve zcrypt reply message verification checks Add or improve checks related to buffer sizes and reply sizes to the handling of replies from the crypto cards for CCA, EP11 (AP message type 6) and ICA (AP type 50) messages. The verification code related to reply field length was not designed well and thus firmware deficiencies could lead to unexpected behavior in the zcrypt device driver. Thus improve the code to more closely inspect especially length fields at message replies. Add length validation before accessing reply message structures in zcrypt_msgtype6_receive(), zcrypt_msgtype6_receive_ep11(), and zcrypt_msgtype50_receive() to prevent out-of-bounds reads and potential kernel memory disclosure. Also rework these three functions to validate reply lengths more carefully before copying data back into the request buffer. Use size_t for length calculations, reject inconsistent reply sizes, and add defensive handling for short invalid replies. For XCRB replies, validate both reply segments and derive the effective message length from the covered range instead of trusting only the second segment. Additionally improve some of the later invoked evaluation functions which further check the payload. Add comments about length assumptions and for the type50 processing rework the payload processing completely with removing a misplaced BUG_ON().

CVSS 3.1 · 6.3 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-15353

SOAP information disclosure through malformed array dimensions

SOAP information disclosure through malformed array dimensions. The SOAP extension reads an uninitialized array position when decoding an encoded array whose arraySize attribute is empty, whitespace-only or non-numeric, or when such dimensions come from a WSDL definition. Four bytes of unrelated heap data can then be used as an integer key in the decoded array. An unauthenticated remote client can trigger this with a crafted request to a SoapServer endpoint, and a malicious SOAP server with a response to SoapClient. Heap memory is disclosed only if the application returns or otherwise exposes the decoded array. This issue affects PHP versions before 8.2.36, 8.3.* before 8.3.37, 8.4.* before 8.4.28 and 8.5.* before 8.5.13.

CVSS 4.0 · 6.3 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99534

ksmbd: prevent stale data from being written by SMB2 WRITE requests

In the Linux kernel, the following vulnerability has been resolved: ksmbd: prevent stale data from being written by SMB2 WRITE requests Initialize the compatibility byte in request buffers without zeroing the entire allocation. Keep the one-byte compatibility exception for SMB2 messages so valid zero-length WRITE requests remain compatible, and validate the data range in the WRITE handlers against the current compound request before accessing it. This prevents stale request-buffer data from being written to files or sent to IPC pipes.

CVSS 3.1 · 4.3 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99541

ksmbd: fix OOB read and cross-share confusion in ksmbd_validate_name_reconnect()

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix OOB read and cross-share confusion in ksmbd_validate_name_reconnect() ksmbd_validate_name_reconnect() indexes ab_pathname[share->path_sz + 1] without checking that the path is longer than share->path_sz + 1 (d_path() fills the buffer from the end). A durable fp is not bound to its original share, so a client can preserve a file from a short-path share and reconnect it on a long-path share, making strcmp() read past the PATH_MAX buffer - with a long enough share path this oopses the kernel, and on a mapped page it also gives a byte-equality oracle on adjacent heap (the reconnect succeeds exactly when the out-of-bounds string equals the requested name). A same-share variant with the durable fp at the share root reads 1 byte past the buffer (strlen(ab_pathname) == share->path_sz). Check before comparing: the path must be longer than share->path_sz, it must start with share->path, and the next character must be '/'. The share root itself is accepted only for an empty name.

CVSS 3.1 · 7.1 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99565

ksmbd: wait for negotiation before receiving another PDU

In the Linux kernel, the following vulnerability has been resolved: ksmbd: wait for negotiation before receiving another PDU The receive thread queues a request and can read the next PDU before the negotiation worker finishes. While need_neg is set, the next PDU can cause ksmbd_init_smb_server() to replace conn->ops. A pipelined SMB2 request can therefore make the worker handle an earlier, shorter SMB1 request with SMB2 operations and read beyond its buffer. An SMB1 multi-protocol negotiate may be followed by an SMB2 NEGOTIATE that changes conn->ops again. Wait for work queued while the connection is new or needs negotiation to complete before reading another PDU. This keeps the operations stable for both stages of negotiation without changing when need_neg is cleared.

CVSS 3.1 · 8.2 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-63390

HTSlib: Heap buffer overflow in BCF reader due to improper validation of input.

HTSlib is a library for reading and writing bioinformatics file formats. Prior to 1.21.2, 1.22.3, 1.23.2, and 1.24, the BCF reader can experience an integer overflow in a record-length check that verifies whether a record contains enough bytes for the expected number and size of stored items. A crafted BCF record can bypass this check, causing reads beyond the stored data and, in some cases, writes beyond the heap buffer when the reader sets the least significant bit of accessed bytes. Opening such a file can crash the process, corrupt data or heap structures, and may permit arbitrary code execution. This issue is fixed in versions 1.21.2, 1.22.3, 1.23.2, and 1.24.

CVSS 4.0 · 8.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-62257

HTSlib: Heap read and write overflow in HTSlib CRAM 4.0 decoder

HTSlib is a library for reading and writing bioinformatics file formats. Prior to 1.21.2, 1.22.3, 1.23.2, and 1.24, the experimental CRAM v4 XPACK and XRLE decoders cache expanded block pointers at indexes beyond the 512-element slice->block_by_id array. An array index partially controlled by data in the input file first causes an out-of-bounds read to determine whether a block is cached; a null value then causes allocation of a block and an out-of-bounds pointer write to the same element. The invalid read may crash the process, while the write may corrupt heap state and could permit arbitrary code execution. This issue is fixed in versions 1.21.2, 1.22.3, 1.23.2, and 1.24.

CVSS 4.0 · 8.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-62259

HTSlib: Out-of-bounds read in HTSlib CRAM 4.0 reader due to improper validation of input

HTSlib is a library for reading and writing bioinformatics file formats. Prior to 1.21.2, 1.22.3, 1.23.2, and 1.24, the experimental CRAM v4 functions cram_xpack_decode_char and cram_xrle_decode_char do not validate that attacker-controlled decode sizes remain within their expanded input arrays. Crafted CRAM data can therefore make either decoder read beyond the supplied input buffer, potentially disclosing process-state information or crashing the process through invalid memory access. This issue is fixed in versions 1.21.2, 1.22.3, 1.23.2, and 1.24.

CVSS 4.0 · 6.9 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-62255

HTSlib: Heap write overflow in HTSlib CRAM index handling

HTSlib is a library for reading and writing bioinformatics file formats. Prior to 1.21.2, 1.22.3, 1.23.2, and 1.24, cram_index_load does not verify that the number of reference sequences in a CRAM .crai index does not exceed the CRAM header reference count. A malformed index can drive unbounded index-array allocation, and when the number of references in the index is within two of INT_MAX, the growth calculation can wrap, read beyond a heap buffer, and use the resulting value as a pointer for an unchecked memory write. Any region query can trigger the flaw, causing denial of service or memory corruption. This issue is fixed in versions 1.21.2, 1.22.3, 1.23.2, and 1.24.

CVSS 4.0 · 7.1 High EPSS < 1% KEV · Not listed
Vendors
Products