Search vulnerabilities

Results 11,873

Export CSV
CVE-2026-89083

HP Advance – Potential Elevation of Privilege, Remote Code Execution & Arbitrary File Write

HP has identified potential security vulnerabilities in the HP Advance software that may enable elevation of privilege, remote code execution, or arbitrary file write under certain conditions, impacting the HP Advance server hosting the software.

CVSS 4.0 · 9.3 Critical EPSS < 1% KEV · Not listed
Vendors
CVE-2026-89084

HP Advance – Potential Elevation of Privilege, Remote Code Execution & Arbitrary File Write

HP has identified potential security vulnerabilities in the HP Advance software that may enable elevation of privilege, remote code execution, or arbitrary file write under certain conditions, impacting the HP Advance server hosting the software.

CVSS 4.0 · 8.8 High EPSS < 1% KEV · Not listed
Vendors
CVE-2026-54504

MCP Documentation Server: Web UI API binds to all interfaces without authentication by default

MCP Documentation Server is a local-first document management and semantic search server for AI coding agents. From 1.13.0 until 1.13.1, the automatically started Web UI in src/server.ts calls startWebServer in src/web-server.ts with START_WEB_UI enabled by default and WEB_PORT set to 3080. startWebServer uses app.listen(PORT) without a host, which binds the unauthenticated document-management API to all interfaces rather than localhost. A network-reachable client can invoke GET /api/documents, GET /api/documents/:id, POST /api/documents, POST /api/search-all, DELETE /api/documents/:id, and GET /api/config without credentials to enumerate and read documents, search the corpus, insert or delete documents, and tamper with the MCP assistant's knowledge base. The service must be reachable from the attacker's LAN, VM network, container bridge, VPN, or another routed network, and the issue does not provide remote code execution. This issue is fixed in 1.13.1.

CVSS 3.1 · 8.8 High EPSS < 1% KEV · Not listed
Vendors
CVE-2026-72764

n8n before 1.123.67 Module Cache Poisoning via Code Node

n8n's JavaScript task runner shared a single module cache across all users' Code-node executions. In affected versions (before 1.123.67, 2.31.5, and 2.32.1), a user able to run a Code node could poison a cached module and thereby alter other users' Code-node executions on the same runner, affecting their confidentiality, integrity, or availability. This is a cross-user isolation break within a single n8n instance and does not constitute a sandbox escape or remote code execution. Only multi-user instances running the JS task runner with built-in or external modules enabled are affected.

CVSS 4.0 · 5.8 Medium EPSS < 1% KEV · Not listed
Vendors
N8n
Products
N8n
CVE-2026-72767

n8n before 1.123.67 Remote Code Execution via Git node

n8n before 1.123.67, 2.x before 2.31.5, and 2.32.x before 2.32.1 contain a remote code execution vulnerability in the Git node. Authenticated users with rights to create and execute workflows can stage a crafted local repository that causes git to run hooks under default git security settings, executing arbitrary commands as the n8n process user. Both self-hosted and cloud instances are affected.

CVSS 4.0 · 8.7 High EPSS < 1% KEV · Not listed
Vendors
N8n
Products
N8n
CVE-2026-86426

LibreNMS before 26.8.0 Authentication Bypass via API Token Type Confusion

LibreNMS before 26.8.0 contains an authentication bypass vulnerability in the REST API that allows unauthenticated attackers to access protected endpoints by sending numeric values instead of string tokens. Attackers can exploit MySQL type coercion by sending small integers like 0 through 9 to match token hashes, gaining access to API functionality including device credentials and administrative features that enable remote code execution through alert templates.

CVSS 4.0 · 9.2 Critical EPSS 4.4% KEV · Not listed
Vendors
Products
CVE-2026-90770

Spug through 3.4.0 Remote Code Execution via ping_check

Spug through 3.4.0 contains a remote code execution vulnerability in the ping_check function that interpolates user-supplied monitor addresses directly into shell commands without validation. Authenticated users with monitor permissions can inject shell metacharacters via the /monitor/run_test/ endpoint to execute arbitrary commands as the Spug process user.

CVSS 4.0 · 8.7 High EPSS 1.3% KEV · Not listed
Vendors
Products
CVE-2026-86124

AutoAgent Unauthenticated Remote Code Execution via the Sandbox TCP Command Server

AutoAgent contains an unauthenticated remote code execution vulnerability in the TCP server that binds to all interfaces and executes attacker-supplied commands as root. Attackers can connect to the exposed communication port and execute arbitrary bash commands within the container, gaining access to bind-mounted host workspace directories.

CVSS 4.0 · 9.3 Critical EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2025-59953

LMdeploy has Remote Code Execution by Pickle Deserialization via zmq_rpc.call_and_response() in InterLM/lmdeploy

LMDeploy is a toolkit for compressing, deploying, and serving large language models. Starting in version 0.9.1 and prior to version 0.10.2, the LMdeploy implements an rpc server (AsyncRPCServer in zmq_rpc.py) for supporting the RPC communications. In its core functionality call_and_response(), I found it will directly use the pickles.loads() to deserialize the received messages without any sanitization, hence resulting in a remote code execution vulnerability by this RPC server. Version 0.10.2 contains a patch.

CVSS 3.1 · 9.8 Critical EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-85169

n8n before 1.123.73 Remote Code Execution via $fromAI Prototype Leak

n8n versions before 1.123.73, 2.35.4, and 2.36.2 contain an expression sandbox escape in the $fromAI handler. $fromAI resolved a caller-supplied placeholder name without requiring it to be an own property and admitted reserved keys; against a primitive input value it returned a live host-prototype reference. An attacker with workflow-build privilege can walk the prototype chain to the Function constructor and compile/execute arbitrary code in the main n8n process, leading to remote code execution.

CVSS 4.0 · 8.7 High EPSS < 1% KEV · Not listed
Vendors
N8n
Products
N8n
CVE-2026-28326

SolarWinds Access Rights Manager Unauthenticated Remote Code Execution Vulnerability

SolarWinds Access Rights Manager was reported to be affected by an unauthenticated remote code execution vulnerability. The issue stems from a hardcoded static key.

CVSS 3.1 · 8.8 High EPSS < 1% KEV · Not listed
Vendors
CVE-2026-92137

Remote Code Execution via Unchecked File Writes in Jenkins Robot Framework Plugin

Jenkins Robot Framework Plugin 6.2.2 and earlier does not check that the archive directory configured for Robot Framework report files is contained within the build directory on the Jenkins controller, allowing attackers with Item/Configure permission to create or replace arbitrary files on the Jenkins controller file system with attacker-specified content, which can lead to remote code execution.

CVSS 3.1 · 8.8 High EPSS < 1% KEV · Not listed
Vendors
CVE-2026-84858

Scada-LTS Authenticated Remote Code Execution via Scripting Sandbox Bypass

ScadaLTS 2.8.1-release-candidate build 0 is affected by an Authenticated Remote Code Execution via Scripting Sandbox Bypass The DWR "DataSourceEditDwr" class exposes the "validateScript" method that compiles and executes attacker-supplied JavaScript via the Rhino scripting engine. There are no authorization checks on this method and so it is possible for an attacker with access to a low privilege user to abuse this flaw by leveraging the DWR routing bypass.

CVSS 3.1 · 8.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-92946

vm2 before 3.11.7 Remote Code Execution via require.external

vm2 before 3.11.7 contains a remote code execution vulnerability when require.external is enabled without an explicit require.root that excludes node_modules. Sandboxed code can require vm2's own package, instantiate an unrestricted NodeVM instance, and execute arbitrary host OS commands via child_process.

CVSS 4.0 · 10 Critical EPSS < 1% KEV · Not listed
Vendors
Products
Vm2
CVE-2026-92934

vm2 before 3.11.8 Sandbox Escape RCE via AggregateError

vm2 before 3.11.8 contains an incomplete fix for Error.cause sanitization that allows sandbox escape when revisited host-wrapped AggregateError objects are caught within a single exception handler traversal. Attackers can exploit cycle detection bypass in handleException to access unsanitized host proxies embedded in the errors array, enabling full remote code execution and process information disclosure from the sandbox.

CVSS 4.0 · 9.5 Critical EPSS < 1% KEV · Not listed
Vendors
Products
Vm2
CVE-2026-50006

Anyquery: Arbitrary File Write (AFW) which could lead to Remote Code Execution (RCE) via Unrestricted ATTACH DATABASE in Server Mode

Anyquery is an SQL query engine built on top of SQLite. Prior to 0.4.5, anyquery server forwards unauthenticated SQL from its MySQL-compatible server port to SQLite without restricting ATTACH DATABASE filesystem targets. A remote attacker can select any path writable by the Anyquery server process, cause SQLite to create a database file there, and place attacker-controlled table content in that file. This permits arbitrary file creation or overwrite, causing filesystem integrity loss and denial of service; remote code execution is possible only when another service interprets the written file or the process has a suitably privileged writable target. This issue is fixed in version 0.4.5.

CVSS 3.1 · 9.1 Critical EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-46495

OpenDJ Pre-Auth RCE via Java Deserialization in JMX RMI

OpenDJ is an LDAPv3 compliant directory service. Prior to 5.1.1, the JMX RMI connector in opendj-server-legacy/src/main/java/org/opends/server/protocols/jmx/RmiConnector.java processes attacker-controlled credential objects before authentication without a restrictive jmx.remote.rmi.server.credentials.filter.pattern, and RmiAuthenticator.authenticate in opendj-server-legacy/src/main/java/org/opends/server/protocols/jmx/RmiAuthenticator.java accepts an unconstrained Object array rather than a two-element String[]. When the JMX Connection Handler is enabled and its TCP listener is reachable, an unauthenticated remote attacker can submit a crafted serialized Java object and achieve code execution in the OpenDJ server process. The handler is disabled by default, and successful exploitation depends on the runtime classpath and Java version; remote code execution was demonstrated against OpenDJ 4.4.15 on JDK 11 with Jackson 2.12.6.1. This issue is fixed in 5.1.1.

CVSS 4.0 · 9.2 Critical EPSS 1.1% KEV · Not listed
Products
CVE-2026-19773

libwebsockets HTTP/2 HPACK Path Header Parsing Out-Of-Bounds Write Remote Code Execution Vulnerability

libwebsockets HTTP/2 HPACK Path Header Parsing Out-Of-Bounds Write Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of libwebsockets. Authentication is not required to exploit this vulnerability. The specific flaw exists within the parsing of HTTP/2 HPACK path header. The issue results from the lack of proper validation of user-supplied data, which can result in a write past the end of an allocated buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-31036.

CVSS 3.0 · 9.8 Critical EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2025-71338

Flowise through 2.2.7 - Arbitrary File Write to Remote Code Execution via document-store API

Flowise through 2.2.7 fails to sanitize path segments in the document-store loader endpoint, allowing unauthenticated attackers to write files outside the storage directory. Attackers can use parent-directory sequences to escape the storage directory and overwrite application files loaded at boot for remote code execution.

CVSS 4.0 · 10 Critical EPSS 1.2% KEV · Not listed
Vendors
Products
CVE-2026-91931

Flowise before 3.1.4 Remote Code Execution via Custom MCP npx

Flowise before 3.1.4 contains a remote code execution vulnerability in the Custom MCP node that allows authenticated attackers to execute arbitrary code by supplying npx package names in the mcpServerConfig parameter. Attackers can invoke npx with attacker-controlled npm packages to execute code on the Flowise server.

CVSS 4.0 · 9 Critical EPSS < 1% KEV · Not listed
Vendors
Products