Search vulnerabilities

Results 429,358

Export CSV
CVE-2026-99504

ASoC: audio-graph-card2: Fix use-after-free in audio_graph2_link_c2c()

In the Linux kernel, the following vulnerability has been resolved: ASoC: audio-graph-card2: Fix use-after-free in audio_graph2_link_c2c() of_graph_get_next_port() consumes the reference of its prev argument. port0 is only borrowed from the caller's iterator, so the call drops a reference the function does not own, and port0 is dereferenced again afterwards. Pass an extra reference, as graph_count_c2c() does, so the reference the callee consumes is the one taken here.

CVSS n/a EPSS n/a KEV · Not listed
Vendors
Products
CVE-2026-99503

ata: sata_fsl: Fix use-after-free of host_priv on probe() failure

In the Linux kernel, the following vulnerability has been resolved: ata: sata_fsl: Fix use-after-free of host_priv on probe() failure sata_fsl_host_stop() releases hcr_base and host_priv: static void sata_fsl_host_stop(struct ata_host *host) { struct sata_fsl_host_priv *host_priv = host->private_data; iounmap(host_priv->hcr_base); kfree(host_priv); } ->host_stop() is called by the driver core through the ata_host_stop() devres action which ata_host_start() registers, so it is called both when the device is unbound and when probe() fails after the host has been started. The error_exit_with_cleanup label of sata_fsl_probe() releases hcr_base and host_priv as well, and it is reachable from the two device_create_file() calls which are done after the host has been activated. In that case sata_fsl_host_stop() runs on an already freed host_priv, resulting in a use-after-free and a double iounmap()/kfree(). Add a separate error label for the failures happening after the host has been activated, which only detaches the host and leaves hcr_base and host_priv to sata_fsl_host_stop(). Note that ata_host_detach() is dropped from error_exit_with_cleanup, as that label is now only reachable while host is still NULL.

CVSS n/a EPSS n/a KEV · Not listed
Vendors
Products
CVE-2026-99502

s390/pci: Fix double-free and NULL deref in zpci MSI domain cleanup

In the Linux kernel, the following vulnerability has been resolved: s390/pci: Fix double-free and NULL deref in zpci MSI domain cleanup zpci_remove_parent_msi_domain() dereferences zbus->msi_parent_domain unconditionally and does not clear it afterwards. zpci_bus_create_pci_bus() removes the domain when pci_create_root_bus() fails, then zpci_bus_release() removes it again on the last kref_put(), reading ->fwnode from the freed irq_domain and freeing it twice. If zpci_alloc_domain() or zpci_create_parent_msi_domain() fails, no domain is created at all; zbus is kzalloc'd, so the same release path dereferences NULL. Return early when there is no domain, and clear the pointer after removing one.

CVSS n/a EPSS n/a KEV · Not listed
Vendors
Products
CVE-2026-99501

s390/pci: Fix MSI directed-mode teardown IRQ bit count

In the Linux kernel, the following vulnerability has been resolved: s390/pci: Fix MSI directed-mode teardown IRQ bit count On s390 with directed interrupts enabled, zpci_msi_teardown_directed() frees the platform's maximum number of MSI bits (zdev->max_msi) instead of the actual allocated count (zdev->msi_nr_irqs). This corrupts the shared IRQ bitmap used by all PCI functions, causing lost interrupts and heap corruption. Fix zpci_msi_teardown_directed() to only free the actual allocated IRQ bit count.

CVSS n/a EPSS n/a KEV · Not listed
Vendors
Products
CVE-2026-99500

s390/pci: Fix resource leak in zpci MSI setup

In the Linux kernel, the following vulnerability has been resolved: s390/pci: Fix resource leak in zpci MSI setup If airq_iv_create() fails in __alloc_airq(), the zpci_sbv bit allocated by airq_iv_alloc_bit() is never freed. This permanently leaks one of the ZPCI_NR_DEVICES summary bits, reducing system capacity with each failed device hotplug. In systems with repeated device insertion failures or under memory pressure, all summary bits can be exhausted, preventing new PCI devices from being added until reboot. Add proper error handling to free the zpci_sbv bit and reset zdev->aisb if the AIBV creation fails.

CVSS n/a EPSS n/a KEV · Not listed
Vendors
Products
CVE-2026-99499

s390/pci: Fix use-after-free race in zpci floating interrupt cleanup

In the Linux kernel, the following vulnerability has been resolved: s390/pci: Fix use-after-free race in zpci floating interrupt cleanup zpci_clear_irq() stops the adapter from raising new interrupts for the function, but a zpci_floating_irq_handler() already running on another CPU can still be scanning zdev->aibv when zpci_msi_teardown_floating() releases it. Clear the zpci_ibv[] entry so no further handler picks the vector up, then wait for a grace period before releasing it. The handler runs inside the rcu_read_lock() section that do_airq_interrupt() holds across airq->handler(), so synchronize_rcu() drains any handler still in flight. Release the vector and free the summary bit only after the grace period, so neither can be reused while a reader still holds the old pointer. zpci_ibv served both delivery modes, indexed by function under FLOATING and by cpu under DIRECTED. Only the floating vectors are published to and torn down under the interrupt handler, so split the directed vectors out into zpci_dibv and annotate zpci_ibv __rcu, which lets sparse check the accessors above.

CVSS n/a EPSS n/a KEV · Not listed
Vendors
Products
CVE-2026-99498

s390/kprobes: Prevent kprobes on instructions with exception table entry

In the Linux kernel, the following vulnerability has been resolved: s390/kprobes: Prevent kprobes on instructions with exception table entry The mvcos exception handler ex_handler_ua_mvcos() decodes the faulting instruction, assuming it is an mvcos instruction. In case the instruction is kprobed the decoded instruction is a breakpoint instruction instead, which leads to incorrect instruction decoding and potential register corruption. Fix this by simply preventing to set a kprobe on such instructions, similar like arm64 is doing it.

CVSS n/a EPSS n/a KEV · Not listed
Vendors
Products
CVE-2026-99497

s390/probes: Fix wrong opcode for cgrb fixup

In the Linux kernel, the following vulnerability has been resolved: s390/probes: Fix wrong opcode for cgrb fixup The last byte of the cgrb instruction is 0xe4, however the probes code compares against 0xe6. Fix it.

CVSS n/a EPSS n/a KEV · Not listed
Vendors
Products
CVE-2026-129481

Use-after-free after interrupted session shutdown

Use-after-free after interrupted session shutdown. The session extension records the filename of the executing script when a session starts. If a fatal error occurs in an application callback while the session variables are destroyed at shutdown, such as stream_close() of a user-defined stream wrapper, the pointer is retained after the request memory is freed, and a later request handled by the same worker can free the stale string. An attacker who can trigger such a failing cleanup may crash the worker or corrupt memory; code execution has not been demonstrated. This requires the filename to be allocated in request memory, for example when the script is not cached by OPcache. This issue affects PHP versions 8.3.* before 8.3.37, 8.4.* before 8.4.28 and 8.5.* before 8.5.13.

CVSS 4.0 · 9.2 Critical EPSS n/a KEV · Not listed
Vendors
Php
Products
Php
CVE-2026-99496

s390/vmcp: Initialize full session info to zero

In the Linux kernel, the following vulnerability has been resolved: s390/vmcp: Initialize full session info to zero The cma_alloc bit as well as the response can contain old data. cma_release will not free the kmalloced memory in that case and the response code might leak kernel stack data to CAP_SYS_ADMIN users.

CVSS n/a EPSS n/a KEV · Not listed
Vendors
Products
CVE-2026-99495

s390/zcrypt: Fix and improve zcrypt reply message verification checks

In the Linux kernel, the following vulnerability has been resolved: s390/zcrypt: Fix and improve zcrypt reply message verification checks Add or improve checks related to buffer sizes and reply sizes to the handling of replies from the crypto cards for CCA, EP11 (AP message type 6) and ICA (AP type 50) messages. The verification code related to reply field length was not designed well and thus firmware deficiencies could lead to unexpected behavior in the zcrypt device driver. Thus improve the code to more closely inspect especially length fields at message replies. Add length validation before accessing reply message structures in zcrypt_msgtype6_receive(), zcrypt_msgtype6_receive_ep11(), and zcrypt_msgtype50_receive() to prevent out-of-bounds reads and potential kernel memory disclosure. Also rework these three functions to validate reply lengths more carefully before copying data back into the request buffer. Use size_t for length calculations, reject inconsistent reply sizes, and add defensive handling for short invalid replies. For XCRB replies, validate both reply segments and derive the effective message length from the covered range instead of trusting only the second segment. Additionally improve some of the later invoked evaluation functions which further check the payload. Add comments about length assumptions and for the type50 processing rework the payload processing completely with removing a misplaced BUG_ON().

CVSS n/a EPSS n/a KEV · Not listed
Vendors
Products
CVE-2026-99494

s390/zcrypt: Fix out-of-bounds ptr advance in cca_query_crypto_facility()

In the Linux kernel, the following vulnerability has been resolved: s390/zcrypt: Fix out-of-bounds ptr advance in cca_query_crypto_facility() The FQ reply parser code blindly advanced the walk pointer by a length value read directly from the hardware reply payload without checking that the advance stayed within the allocated reply buffer. A corrupt or malicious device response could push ptr beyond the cprbmem region, causing an out-of-bounds dereference or kernel memory exposure via the subsequent memcpy(). Fix this by tracking the remaining reply buffer space in a variable and validating each device-supplied length field against it before advancing or dereferencing the pointer.

CVSS n/a EPSS n/a KEV · Not listed
Vendors
Products
CVE-2026-99493

s390/zcrypt: Guard domain index uses against speculative bypass

In the Linux kernel, the following vulnerability has been resolved: s390/zcrypt: Guard domain index uses against speculative bypass The previous array_index_nospec() placement only covered the admin permission check, leaving ap_test_config_usage_domain() and ap_test_config_ctrl_domain() in the CCA path exposed to speculative execution. Move the sanitization to before all permission and config checks in both the CCA and EP11 paths. Hold the sanitized domain value in another variable so that the later use can choose to use either the original value (subject to speculative execution) or the sanitized value (which may in case of AUTOSEL_DOM reflect the wrong value). Before that, check the domain value to be either AUTOSEL_DOM or in range 0...AP_DOMAINS-1 and return with -EINVAL in case this check does not pass.

CVSS n/a EPSS n/a KEV · Not listed
Vendors
Products
CVE-2026-99492

HID: wacom: Advertise SW_MUTE_DEVICE capability prior to registration

In the Linux kernel, the following vulnerability has been resolved: HID: wacom: Advertise SW_MUTE_DEVICE capability prior to registration Input subsystem guidelines require that device capabilities are advertised before the input device is registered. The Wacom driver was violating this by advertising the SW_MUTE_DEVICE capability post-registration in wacom_set_shared_values() (and duplicating it in device-specific setup cases). Resolve this by moving the SW_MUTE_DEVICE capability setup to wacom_setup_touch_input_capabilities() for all touch devices that support it. For generic touch devices whose capabilities depend on mute switch usages parsed from a sibling Pen/Pad interface, defer registration with -EPROBE_DEFER until the sibling has parsed its descriptors and initialized shared capabilities.

CVSS n/a EPSS n/a KEV · Not listed
Vendors
Products
CVE-2026-99491

HID: wacom: Fix Use-After-Free in wacom_intuos_pad

In the Linux kernel, the following vulnerability has been resolved: HID: wacom: Fix Use-After-Free in wacom_intuos_pad wacom_intuos_pad() accesses wacom->shared->touch_input locklessly inside the interrupt handler context. If the Touch sibling device is disconnected, wacom_remove_shared_data() clears 'touch_input' outside any lock, creating a Time-of-Check to Time-of-Use (TOCTOU) race condition where a preempted reader in interrupt context dereferences the freed pointer, leading to a Use-After-Free. Resolve this by introducing RCU protection for the touch_input pointer: - Annotate 'touch_input' in wacom_shared struct with __rcu - Wrap all lockless readers in wacom_wac.c with guard(rcu)() and rcu_dereference() using a unified wacom_report_touch_mute() helper - Update writers in wacom_sys.c using rcu_assign_pointer() - Call synchronize_rcu() in wacom_remove_shared_data() to ensure all active RCU readers have finished before the input device is freed Also wrap wacom_set_shared_values() and touch/pen assignments in wacom_add_shared_data() inside the wacom_udev_list_lock to serialize concurrent probe assignments, and verify that 'shared->touch == hdev' before setting touch_input to prevent concurrent sibling probe state desynchronization.

CVSS n/a EPSS n/a KEV · Not listed
Vendors
Products
CVE-2026-99490

HID: wacom: Fix Use-After-Free in wacom_bamboo_pad

In the Linux kernel, the following vulnerability has been resolved: HID: wacom: Fix Use-After-Free in wacom_bamboo_pad wacom_bamboo_pad_pen_event() accesses wacom->shared->pen locklessly relative to wacom_remove_shared_data() which nullifies it. This can lead to a Use-After-Free if the sibling device is removed while events are being processed. Resolve this by introducing RCU protection for pen and touch pointers: - Annotate 'pen' and 'touch' in wacom_shared struct with __rcu. - Wrap lockless readers in wacom_bamboo_pad_pen_event() with rcu_read_lock() and rcu_dereference(). - Update writers in wacom_sys.c using rcu_assign_pointer(). - Use rcu_dereference_protected for comparisons under wacom_udev_list_lock. - Also use rcu_access_pointer in wacom_sibling_pending() and wacom_mode_change_work() to avoid warnings (while lockless access in the latter remains a pre-existing issue).

CVSS n/a EPSS n/a KEV · Not listed
Vendors
Products
CVE-2026-99489

HID: wacom: Redesign shared sibling data lifecycle

In the Linux kernel, the following vulnerability has been resolved: HID: wacom: Redesign shared sibling data lifecycle The Wacom driver coordinates state between sibling interfaces of the same physical device using a shared structure 'wacom_shared' inside 'wacom_hdev_data'. The driver kept a volatile representative pointer 'data->dev' pointing to a sibling 'hid_device' for physical path comparisons during sibling matching. This pointer management is fragile. When the representative device is disconnected, wacom_remove_shared_data() failed to clear/update 'data->dev', leading to a Use-After-Free vulnerability when subsequent sibling probes dereference the dangling 'data->dev' pointer. Resolve this issue by redesigning the sibling data lifecycle: - Eliminate the volatile 'data->dev' representative pointer completely - Redesign 'wacom_hdev_data' to store stable static copies of the required attributes upon first allocation: 'phys' path string, 'vendor', 'product' IDs and the sibling's 'device_type' - Use these static attributes for stable sibling matching in wacom_are_sibling() and wacom_get_hdev_data() This ensures sibling matching remains safe and stable even if individual siblings are dynamically added or removed. To secure the lifecycle against concurrent probe/disconnect races: - Switch kref_put() to kref_put_mutex() in wacom_remove_shared_data() to serialize refcount drops with list traversal and lookup - Modify wacom_release_shared_data() to assume the list lock is already held Also, do not accumulate the 'device_type' capability flag during subsequent sibling probes. Keeping only the first probed sibling's device_type exactly preserves the original sibling matching behavior without introducing side effects.

CVSS n/a EPSS n/a KEV · Not listed
Vendors
Products
CVE-2026-99488

klist: avoid accesses after waking klist_remove()

In the Linux kernel, the following vulnerability has been resolved: klist: avoid accesses after waking klist_remove() klist_remove() waits until a node is unreferenced so that its caller can free the containing object. klist_release() currently publishes waiter->woken and wakes the waiter before its final accesses to the waiter and node. klist_remove() can then return, allowing its stack waiter and the containing object to be freed or reused while klist_release() is still running. In particular, bus_remove_driver() can free drv->p while __device_attach() walks the same bus klist with bus_for_each_drv(). On an arm64 Cortex-A72 system, an unpatched 7.2.0-rc3 kernel with CONFIG_PREEMPT_RT=y and CONFIG_KASAN=y reproduced the bug through the in-tree I2C/at24 path. KASAN reported a use-after-free in klist_dec_and_del() reached from klist_next()/bus_for_each_drv() while at24 was being unregistered. Clear n_klist and take a task reference before publishing woken. Use release/acquire accesses for that publication and wake the referenced task. The task reference keeps the waiter task alive if it returns and exits before wake_up_process().

CVSS n/a EPSS n/a KEV · Not listed
Vendors
Products
CVE-2026-99487

rust: bug: pass TAINT_WARN to warn_slowpath_fmt() on UML

In the Linux kernel, the following vulnerability has been resolved: rust: bug: pass TAINT_WARN to warn_slowpath_fmt() on UML On UML, `warn_flags!` calls `warn_slowpath_fmt()` directly. Its third argument is a taint number, but `warn_on!` passes its bug flags there. As a result, `add_taint()` gets 2304 instead of 9 (`TAINT_WARN`). The warning is not recorded: `/proc/sys/kernel/tainted` stays 0 after `warn_on!` fires, where it should be 512. It also causes an out-of-bounds write in `add_taint()`. Pass `TAINT_WARN` directly, as C does on UML.

CVSS n/a EPSS n/a KEV · Not listed
Vendors
Products
CVE-2026-99486

rust: configfs: fix data offset calculation for subsystem callbacks

In the Linux kernel, the following vulnerability has been resolved: rust: configfs: fix data offset calculation for subsystem callbacks `get_group_data()` chooses between `Group::<Parent>::container_of()` and `Subsystem::<Parent>::container_of()` based on whether `this` represents the root group of a configfs subsystem. It detects this by checking `(*this).cg_subsys.is_null()`, but `link_group()` in `fs/configfs/dir.c` unconditionally sets `cg_subsys` for every `config_group` attached anywhere in a registered subsystem, including the subsystem's own `su_group`. The only `config_group` with a NULL `cg_subsys` is the configfs root, on which userspace cannot trigger callbacks. The check is therefore always false at runtime, and the `Subsystem` branch is dead. Subsystem-level callbacks reach the `Group` branch and may read `data` at the wrong offset. Thus change the `is_root` check to correctly identify whether a group is a root group by comparing `this` to `subsys.su_group`. [ Andreas: Fix clippy warning on 1.85.0 by moving safety comment. ]

CVSS n/a EPSS n/a KEV · Not listed
Vendors
Products