Software installed and run as a non-privileged user may conduct improper GPU system calls to the execution of an error path that triggers an OOB read & write. An error can be triggered which causes the index of the array element to be cleaned up by the error path would be outside of the array bounds.
Search vulnerabilities
Memory overflow in HTTP/2 handling can lead to unpredictable or erroneous behavior or Denial of Service in Citrix NetScaler ADC and Citrix NetScaler Gateway
Memory overflow in HTTP/2 handling can lead to unpredictable or erroneous behavior or Denial of Service in Citrix NetScaler ADC and Citrix NetScaler Gateway.
Memory overflow / improper handling in BGP dynamic routing can lead to unpredictable or erroneous behavior or Denial of Service in Citrix NetScaler ADC and Citrix NetScaler Gateway
Memory overflow / improper handling in BGP dynamic routing can lead to unpredictable or erroneous behavior or Denial of Service in Citrix NetScaler ADC and Citrix NetScaler Gateway.
Heap buffer overflow in embedded database migration
LibreOffice Base documents can hold an embedded HSQLDB database. When the experimental features option is enabled, LibreOffice offers to migrate such a database to the embedded Firebird engine when the document is opened. A heap buffer overflow existed when binary values were copied during the migration, because a value could be longer than the space set aside for its column. In fixed versions that space is enlarged whenever a value is longer than its column.
Out-of-bounds write in the DesignWare I3C driver when the device address table is full
The Synopsys DesignWare I3C controller driver (drivers/i3c/i3c_dw.c) tracks free Device Address Table (DAT) slots with get_free_pos(), which signals an exhausted table by returning -1. The helper declared its return type as uint8_t, so the sentinel was truncated to 255, and both consumers (dw_i3c_attach_device() and dw_i3c_i2c_attach_device()) also stored it in a uint8_t before testing if (pos < 0) — a comparison that is never true for an unsigned value. The exhaustion guard was therefore inert in every build. With the guard defeated, an attach attempted on a full DAT proceeds with pos == 255: it writes data->dw_i3c_i2c_priv_data[255].id, more than 200 bytes past the end of the 32-element dw_i3c_i2c_priv_data array and past the end of struct dw_i3c_data; it stores the resulting out-of-bounds address in desc->controller_priv, from which later detach, reattach and IBI operations read the slot index back; and it performs a 32-bit MMIO store 1020 bytes beyond the hardware DAT base, outside the table the controller reports. The attach still returns success, so the upper layer believes the device is bound. The DAT is smaller than the software array (its depth is read from DEVICE_ADDR_TABLE_POINTER, commonly 8 or 16 entries), so exhaustion is reachable. In a dual-role build (CONFIG_I3C_DUAL_ROLE with CONFIG_I3C_USE_IBI) acting as a secondary controller, the attach count is supplied by the bus's active controller: i3c_sec_handoffed() attaches one device per entry of the received DEFTGTS list, so a hostile or malfunctioning controller on the local I3C bus that declares more targets than the local DAT depth triggers the condition once per surplus entry. Exhaustion can also be reached from a devicetree that declares more devices than the table holds, or by repeated i3c attach shell commands. Impact is bounded: the out-of-bounds store is a single byte of fixed value at a fixed displacement, with no attacker-chosen data or offset, so the realistic outcomes are corruption of neighbouring static driver state, writes into reserved controller registers, and inconsistent driver bookkeeping (a crash or a wedged I3C bus) rather than a controllable memory-write primitive. The attack vector is the local chip-to-chip I3C bus; there is no network-reachable path.
Out-of-bounds write in PDF import of masked images
LibreOffice can open PDF files in Draw, where the PDF import converts each page into drawing objects that can be edited. Images in the PDF, including images with a transparency mask, are converted along the way. An out-of-bounds write existed when an image with a transparency mask was converted, because positions taken from a crafted image were not checked against the size of the image buffer. In fixed versions the image size is limited, and the position of each mask pixel is checked before it is written.
Memory overflow / improper handling in GSLB and geolocation (MEP, static-proximity, config-sync) can lead to unpredictable or erroneous behavior or Denial of Service in Citrix NetScaler
Memory overflow / improper handling in GSLB and geolocation (MEP, static-proximity, config-sync) can lead to unpredictable or erroneous behavior or Denial of Service in Citrix NetScaler
Out-of-bounds stack write in MCUboot split-image validation with SHA-384/SHA-512 builds
split_image_check() in boot/bootutil/src/loader.c declares a fixed uint8_t loader_hash[32] buffer and passes it as the out_hash out-parameter to bootutil_img_validate(). That routine copies IMAGE_HASH_SIZE bytes into out_hash (memcpy(out_hash, hash, IMAGE_HASH_SIZE) in boot/bootutil/src/image_validate.c), where IMAGE_HASH_SIZE is a compile-time constant of 64 for MCUBOOT_SHA512 or 48 for MCUBOOT_SIGN_EC384/SHA-384 (boot/bootutil/include/bootutil/crypto/sha.h). The buffer tracks SHA-256 (32 bytes) while the copy length tracks the configured algorithm, so the write overruns the buffer by 16 or 32 bytes. The overflow is only present in a non-default configuration: the legacy Mynewt split-image feature must be compiled (split_go()/split_image_check(), i.e. neither MCUBOOT_DIRECT_XIP nor MCUBOOT_RAM_LOAD), the digest must be larger than 32 bytes (MCUBOOT_SHA512 or MCUBOOT_SIGN_EC384), and MCUBOOT_SIGN_PURE must be off. split_go() is a public API with no caller inside MCUboot; it is invoked from a Mynewt application. In the default SHA-256 build there is no overflow. The over-written bytes are the one-way digest of the loader image and the overflow length is fixed at build time, so the contents are not meaningfully attacker-controlled and the size is not attacker-chosen. The realistic impact is bounded, uncontrolled corruption of the bootloader's stack on the split-boot path, manifesting as instability or failed boot in the affected configuration rather than reliable code execution. The fix is to size loader_hash to IMAGE_HASH_SIZE and pass IMAGE_HASH_SIZE as the matching seed length.
msgpack-c through 7.0.2 Heap Buffer Overflow via msgpack_vrefbuffer_migrate
msgpack-c through 7.0.2 contains a heap buffer overflow vulnerability in msgpack_vrefbuffer_migrate() in src/vrefbuffer.c that checks capacity against the source array's end pointer. When migrating between vrefbuffers of unequal size, the realloc is skipped and memcpy() writes iovec entries past the destination array, corrupting adjacent heap memory or crashing the application.
Heap overflow via oversized RSA signature in GCP KMS signing callback
A memory-safety flaw in the key-management request-building component of the library can lead to an out-of-bounds write on the heap. A fixed-size output buffer is used under an assumption about cryptographic key size that is never validated, so when the library is embedded by a caller that supplies its own cryptographic callback implementation, data larger than the buffer can be written past its end. Exploitation requires the ability to control the embedding application's in-process key-management provider configuration, a high-privilege position. The demonstrated impact is memory corruption resulting in abnormal termination of the client process.
Out-of-bounds Write in Git
Out-of-bounds write possible in Git when git-merge(1) used on tag with more than two GPG signatures
One-byte buffer overflow in wide scanf %s and %[ conversions
Calling the wide scanf family of functions (swscanf, fwscanf, wscanf, vswscanf, vfwscanf and vwscanf) with a %s or %[ conversion without the 'l' length modifier in the GNU C Library version 2.2 to version 2.44 writes an extra null byte one past the end of the destination array when the converted multibyte string and its terminating null byte exactly fill that array. These conversions store each wide input character into the caller's char array as a multibyte sequence. The conversion ends with the sequence that returns to the initial shift state, which also stores the terminating null byte, and the functions then append a second null byte. A destination sized for the converted string and one terminator, as the C standard requires the caller to provide, is therefore written one byte past its end. The out-of-bounds byte is always a null byte, which may corrupt adjacent data or crash the process. An attacker who supplies the input can trigger the overflow with a string whose converted length exactly fills the destination. The narrow scanf functions, the %ls and %l[ conversions into a wchar_t array, and the 'a' and 'm' allocation modifiers are not affected, and storing a wide scanf conversion into a narrow char array is uncommon. This issue affects all architectures and ABIs supported by the GNU C Library.
IBM i is Affected By Multiple Vulnerabilities in PASE [, ]
IBM i 7.6, 7.5, 7.4, and 7.3 could allow a denial of service as a result of a buffer overflow in a PASE process. An authenticated attacker could leverage this to terminate their own process.
usb: xhci: Fix bounce buffer overflow
In the Linux kernel, the following vulnerability has been resolved: usb: xhci: Fix bounce buffer overflow High-speed devices with out of spec 1024 byte bulk endpoints exist and are allowed by USB core, but xhci-hcd always sets packet size to 512. The exact nature of these devices isn't documented, commit fb5ee84ea72c ("USB: Accept bulk endpoints with 1024-byte maxpacket") only states that they "don't work with xHCI host controllers", whatever it means. But somebody (or a malicious device) can try, and then the driver will allocate a 512 byte bounce buffer for this endpoint and may write up to 1024 bytes into it if particular scatter-gather URBs are used, because xhci_align_td() obtains packet size from the descriptor. Fix this. As a side effect, TRBs will be aligned to the packet size chosen by the driver on all endpoints of all speeds. Alignment serves the xHC, not device, so this is fine. Only out of spec devices are affected anyway.
virglrenderer: virglrenderer: guest-triggerable out-of-bounds write
An out-of-bounds write flaw was found in virglrenderer, the host-side 3D renderer used by virtual machines with virtio-gpu OpenGL acceleration enabled. A malicious guest VM can send a crafted pair of linked shaders that triggers an out-of-bounds memory write on the host during shader translation, before any GL call is made. This can crash the host renderer process and may allow further impact.
Memory overflow in SSL/TLS/DTLS can lead to unpredictable or erroneous behavior or Denial of Service in Citrix NetScaler ADC and Citrix NetScaler Gateway
Memory overflow in SSL/TLS/DTLS can lead to unpredictable or erroneous behavior or Denial of Service in Citrix NetScaler ADC and Citrix NetScaler Gateway.
Node.js is vulnerable to a heap buffer overflow in HTTP/2 session.altsvc() via a long origin
A one-byte heap buffer overflow in Node.js HTTP/2 Alt-Svc handling lets a remote, unauthenticated attacker corrupt process memory. When an application passes an attacker-controlled value such as a request's :authority header to Http2Session.altsvc(), the AltSvc implementation in src/node_http2.cc allocates a buffer sized to the origin length and then writes it with a null terminator, placing one byte past the end of the allocation. A single request carrying a long but syntactically valid :authority triggers the out-of-bounds write, which aborts the process and serves as a remote heap-corruption primitive. This vulnerability affects Node.js 26.x and 24.x.
FortiMail Remote Out‑of‑Bounds Write Leading to Denial of Service
A out-of-bounds write vulnerability in Fortinet FortiMail 8.0.0 through 8.0.1, FortiMail 7.6.0 through 7.6.6, FortiMail 7.4.0 through 7.4.8, FortiMail 7.2 all versions may allow a remote unauthenticated attacker to cause a denial of service via a specially crafted HTTP request.
BACnet Stack: malicious ReadPropertyMultiple-ACK with excessive properties causes global-buffer-overflow in ProcessRPMData()
BACnet Stack is a BACnet open source protocol stack C library for embedded systems. Prior to versions 1.4.5, 1.5.1, and 1.6.0, in the official apps/epics client tool on v1.6.0-rc1 (not in the generic BACnet RPM ACK decoder alone) a malicious BACnet/IP endpoint can reply to the EPICS tool’s legitimate ReadPropertyMultiple request with a syntactically valid ReadPropertyMultiple-ACK that contains more heading properties than the tool’s fixed local storage can hold. The response is decoded successfully and later consumed by ProcessRPMData(), which writes property values into a fixed global array using an unbounded linear index. This results in a reproducible global-buffer-overflow in apps/epics/main.c. This is a network-reachable memory corruption in the official epics tool’s response-processing path. The root cause is that apps/epics treats a remotely supplied variable-length RPM property list as if it were a trusted, fixed-size local heading-property set. This issue has been patched in versions 1.4.5, 1.5.1, and 1.6.0.
BACnet Stack: Stack-based buffer overflow in Notification Class AddListElement recipient-list decoding
BACnet Stack is a BACnet open source protocol stack C library for embedded systems. Prior to versions 1.4.4, 1.5.1, and 1.6.0, a stack-based out-of-bounds write exists in the Notification Class object implementation when handling AddListElement for the recipient-list property. This issue has been patched in versions 1.4.4, 1.5.1, and 1.6.0.