Search vulnerabilities

Results 6,868

Export CSV
CVE-2026-70640

llama.cpp b1886–b7445 Race Condition Use-After-Free via llama-android.cpp

llama.cpp builds b1886 through b7445 contain a race condition use-after-free vulnerability in the LLaMA-Android JNI wrapper where bench_1model() and free_1context() lack synchronization, allowing Thread A to operate on freed memory while Thread B concurrently frees the llama_context. Attackers can exploit this by performing heap spray with attacker-controlled data containing a fake vtable to hijack the vtable pointer at offset +0x30, causing llama_batch_allocr::clear() to dereference arbitrary memory and achieve remote code execution.

CVSS 4.0 · 7.3 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-45341

BACnet Stack: NULL pointer dereference in bacnet_device_object_reference_decode() when WriteProperty updates Structured View subordinate-list

BACnet Stack is a BACnet open source protocol stack C library for embedded systems. From versions 1.4.0 to before 1.4.4, and 1.5.0 to before 1.5.1, a NULL pointer dereference can be triggered in bacnet_device_object_reference_decode() when a WriteProperty request updates OBJECT_STRUCTURED_VIEW / PROP_SUBORDINATE_LIST. This issue has been patched in versions 1.4.4 and 1.5.1.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-127100

Sssd: sssd: local denial of service through unchecked oauth2 json code type in pam responder

A flaw was found in SSSD's PAM responder on builds with the JSON PAM extension enabled. A local attacker can submit a crafted authentication request containing a non-string OAuth2 code value. Missing JSON type validation leads to a NULL pointer dereference, terminating the PAM responder and disrupting SSSD-backed authentication.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
CVE-2026-121293

Security Advisory 0210

On affected EOS-based platforms, an attacker who controls a Border Gateway Protocol (BGP) peer can send a crafted BGP message over an established session with the Dynamic Path Selection (DPS) address family negotiated. This can cause the BGP process to terminate unexpectedly, resetting all BGP sessions and disrupting routing services until the process restarts.

CVSS 4.0 · 6.9 Medium EPSS < 1% KEV · Not listed
Vendors
Products
Eos
CVE-2026-121286

Security Advisory 0213

On affected platforms running Arista EOS in multi-agent routing model with BGP Segment Routing Traffic Engineering (SR-TE) address family configured, a BGP peer can send crafted BGP packets to cause the BGP process to restart, disrupting all BGP sessions on the device.

CVSS 4.0 · 6 Medium EPSS < 1% KEV · Not listed
Vendors
Products
Eos
CVE-2026-113549

Audition | NULL Pointer Dereference (CWE-476)

Audition is affected by a NULL Pointer Dereference vulnerability that could result in an application denial-of-service. An attacker could exploit this vulnerability to crash the application, leading to a denial-of-service condition. Exploitation of this issue requires user interaction in that a victim must open a malicious file.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
CVE-2026-113521

After Effects | NULL Pointer Dereference (CWE-476)

After Effects is affected by a NULL Pointer Dereference vulnerability that could result in an application denial-of-service. An attacker could exploit this vulnerability to crash the application, leading to a denial-of-service condition. Exploitation of this issue requires user interaction in that a victim must open a malicious file.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-126246

A null pointer dereference vulnerability in Fortinet FortiAuthenticator 8.0.0 through 8.0.3, FortiAuthenticator 6.6.0 through 6.6.10 may allow an unauthenticated attacker to perform a denial of service attack via http requests.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed
Vendors
CVE-2026-112318

Krb5: mit krb5 kadmind authenticated dos exploiting dereference of null policy name pointers

The policy RPC stubs in kadmin/server/server_stubs.c in MIT Kerberos 5 (aka krb5) 1.5.3 and later do not reject a NULL policy name decoded by xdr_nullstring(), which allows remote authenticated users to cause a denial of service (kadmind crash via NULL pointer dereference) by sending a policy request with an empty policy name that reaches authorization checks or logging code.

CVSS 3.1 · 6.5 Medium EPSS < 1% KEV · Not listed
Vendors
CVE-2026-64511

ACPI: NFIT: core: Fix possible NULL pointer dereference

In the Linux kernel, the following vulnerability has been resolved: ACPI: NFIT: core: Fix possible NULL pointer dereference After commit 9b311b7313d6 ("ACPI: NFIT: Install Notify() handler before getting NFIT table"), acpi_nfit_probe() installs an ACPI notify handler for the NFIT device before checking the presence of the NFIT table. If that table is not there, 0 is returned without allocating the acpi_desc object and setting the driver data pointer of the NFIT device. If the platform firmware triggers an NFIT_NOTIFY_UC_MEMORY_ERROR notification on the NFIT device at that point, acpi_nfit_uc_error_notify() will dereference a NULL pointer. Prevent that from occurring by adding an acpi_desc check against NULL to acpi_nfit_uc_error_notify().

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-90587

NULL pointer dereference in the Zephyr USB host stack when a device reports zero configurations

usbh_device_init() in subsys/usb/host/usbh_device.c rejects a device whose device descriptor advertises bNumConfigurations == 0, but it only logs the error and jumps to the cleanup label without setting the return code. At that point the local err is still 0 from the preceding successful descriptor read, so the function returns success while having skipped usbh_device_set_configuration() — the only place udev->cfg_desc is allocated. The device structure is zero-initialised by usbh_device_alloc(), so udev->cfg_desc remains NULL. usbh_device_connect() treats the zero return as a successful enumeration and calls usbh_class_probe_device(), which starts its descriptor walk from udev->cfg_desc. usbh_desc_get_next_function() passes that NULL pointer to usbh_desc_is_valid(), whose only guard compares the caller-supplied size, so head->bLength is read through a NULL pointer. The condition is triggered entirely by the attached peripheral: attaching a USB device (or any USB gadget emulating one) that reports bNumConfigurations = 0 reaches the defect directly from the UHC_EVT_DEV_CONNECTED_FS/_HS event handler in subsys/usb/host/usbh_core.c, with no authentication and no user interaction beyond the physical attachment. On targets where page zero is unmapped or CONFIG_NULL_POINTER_EXCEPTION_DETECTION is enabled this raises a fatal exception in the USB host thread, denying service to the host. Where address zero is readable, the descriptor walker instead parses low memory as a descriptor chain and can dispatch a class probe() with attacker-influenced values, causing further out-of-bounds reads through the still-NULL udev->cfg_desc in usbh_desc_get_iface(). No attacker-controlled write was identified, so the impact is availability plus a bounded out-of-bounds read. Note that CONFIG_USB_HOST_STACK is marked experimental.

CVSS 3.1 · 4.6 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-64457

virtio_pci: fix vq info pointer lookup via wrong index

In the Linux kernel, the following vulnerability has been resolved: virtio_pci: fix vq info pointer lookup via wrong index Unbinding a virtio balloon device: echo virtio0 > /sys/bus/virtio/drivers/virtio_balloon/unbind triggers a NULL pointer dereference. The dmesg says: BUG: kernel NULL pointer dereference, address: 0000000000000008 [...] RIP: 0010:__list_del_entry_valid_or_report+0x5/0xf0 Call Trace: <TASK> vp_del_vqs+0x121/0x230 remove_common+0x135/0x150 virtballoon_remove+0xee/0x100 virtio_dev_remove+0x3b/0x80 device_release_driver_internal+0x187/0x2c0 unbind_store+0xb9/0xe0 kernfs_fop_write_iter.llvm.11660790530567441834+0xf6/0x180 vfs_write+0x2a9/0x3b0 ksys_write+0x5c/0xd0 do_syscall_64+0x54/0x230 entry_SYSCALL_64_after_hwframe+0x29/0x31 [...] </TASK> The virtio_balloon device registers 5 queues (inflate, deflate, stats, free_page, reporting) but only the first two are unconditional. The stats, free_page and reporting queues are each conditional on their respective feature bits. When any of these features are absent, the corresponding vqs_info entry has name == NULL, creating holes in the array. The root cause is an indexing mismatch introduced when vq info storage was changed to be passed as an argument. vp_find_vqs_msix() and vp_find_vqs_intx() store the info pointer at vp_dev->vqs[i], where 'i' is the caller's sparse array index. However, the virtqueue itself gets vq->index assigned from queue_idx, a dense index that skips NULL entries. When holes exist, 'i' and queue_idx diverge. Later, vp_del_vqs() looks up info via vp_dev->vqs[vq->index] using the dense index into the sparsely-populated array, and hits NULL. Fix this by storing info at vp_dev->vqs[queue_idx] instead of vp_dev->vqs[i], so the store index matches the lookup index (vq->index). Apply the fix to both the MSIX and INTX paths.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-64480

ALSA: ice1712: check snd_ctl_new1() return value

In the Linux kernel, the following vulnerability has been resolved: ALSA: ice1712: check snd_ctl_new1() return value snd_ctl_new1() can return NULL when memory allocation fails. The ice1712 driver calls snd_ctl_new1() without checking the return value before dereferencing the pointer in multiple places (ice1712.c, ice1724.c, aureon.c), which can lead to NULL pointer dereferences. Add NULL checks after snd_ctl_new1() calls and return -ENOMEM if any fails.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-63977

dpll: zl3073x: use __dpll_device_change_ntf() and remove change_work

In the Linux kernel, the following vulnerability has been resolved: dpll: zl3073x: use __dpll_device_change_ntf() and remove change_work The change_work was introduced to send device change notifications from DPLL device callbacks without deadlocking on dpll_lock, since the callbacks are already invoked under that lock. Now that __dpll_device_change_ntf() is exported for callers that already hold dpll_lock, use it directly and remove the change_work infrastructure entirely. This eliminates a race condition where change_work could be re-scheduled after cancel_work_sync() during device teardown, potentially causing the handler to dereference a freed or NULL dpll_dev pointer.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-63882

drm/amdkfd: fix NULL pointer bug in svm_range_set_attr

In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: fix NULL pointer bug in svm_range_set_attr The process_info could be NULL if user doesn't call kfd_ioctl_acquire_vm before calling kfd_ioctl_svm. (cherry picked from commit 83a26c812e0529eb040d31a76f73e33e637243d4)

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-123507

Vikunja 0.24.0 before 2.7.1 Denial of Service via Nil Bucket Filter

Vikunja from 0.24.0 before 2.7.1 contains a nil pointer dereference vulnerability that allows project admins to break project views by saving a filter-mode bucket configuration with a null filter. Because validateProjectViewFilters skips nil entries, every subsequent read of the view panics in kanban and task collection code, returning HTTP 500 to all project members.

CVSS 4.0 · 5.1 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-118198

Photoshop Desktop | NULL Pointer Dereference (CWE-476)

Photoshop Desktop is affected by a NULL Pointer Dereference vulnerability that could result in an application denial-of-service. An attacker could exploit this vulnerability to crash the application, leading to a denial-of-service condition. Exploitation of this issue requires user interaction in that a victim must open a malicious file.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products