Export limit exceeded: 430563 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.

Search vulnerabilities

Results 1,903

Export CSV
CVE-2024-47540

GHSL-2024-197: GStreamer uses uninitialized stack memory in Matroska/WebM demuxer

GStreamer is a library for constructing graphs of media-handling components. An uninitialized stack variable vulnerability has been identified in the gst_matroska_demux_add_wvpk_header function within matroska-demux.c. When size < 4, the program calls gst_buffer_unmap with an uninitialized map variable. Then, in the gst_memory_unmap function, the program will attempt to unmap the buffer using the uninitialized map variable, causing a function pointer hijack, as it will jump to mem->allocator->mem_unmap_full or mem->allocator->mem_unmap. This vulnerability could allow an attacker to hijack the execution flow, potentially leading to code execution. This vulnerability is fixed in 1.24.10.

CVSS 4.0 · 8.6 High EPSS 1.0% KEV · Not listed
Vendors
Products
CVE-2024-47613

GHSL-2024-118: GStreamer has a null pointer dereference in gst_gdk_pixbuf_dec_flush

GStreamer is a library for constructing graphs of media-handling components. A null pointer dereference vulnerability has been identified in `gst_gdk_pixbuf_dec_flush` within `gstgdkpixbufdec.c`. This function invokes `memcpy`, using `out_pix` as the destination address. `out_pix` is expected to point to the frame 0 from the frame structure, which is read from the input file. However, in certain situations, it can points to a NULL frame, causing the subsequent call to `memcpy` to attempt writing to the null address (0x00), leading to a null pointer dereference. This vulnerability can result in a Denial of Service (DoS) by triggering a segmentation fault (SEGV). This vulnerability is fixed in 1.24.10.

CVSS 4.0 · 8.6 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2024-9397

firefox: thunderbird: Potential directory upload bypass via clickjacking

A missing delay in directory upload UI could have made it possible for an attacker to trick a user into granting permission via clickjacking. This vulnerability affects Firefox < 131, Firefox ESR < 128.3, Thunderbird < 128.3, and Thunderbird < 131.

CVSS 3.1 · 6.1 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2024-3652

IKEv1 default AH/ESP responder can cause libreswan to abort and restart

The Libreswan Project was notified of an issue causing libreswan to restart when using IKEv1 without specifying an esp= line. When the peer requests AES-GMAC, libreswan's default proposal handler causes an assertion failure and crashes and restarts. IKEv2 connections are not affected.

CVSS 3.1 · 6.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2025-27516

Jinja sandbox breakout through attr filter selecting format method

Jinja is an extensible templating engine. Prior to 3.1.6, an oversight in how the Jinja sandboxed environment interacts with the |attr filter allows an attacker that controls the content of a template to execute arbitrary Python code. To exploit the vulnerability, an attacker needs to control the content of a template. Whether that is the case depends on the type of application using Jinja. This vulnerability impacts users of applications which execute untrusted templates. Jinja's sandbox does catch calls to str.format and ensures they don't escape the sandbox. However, it's possible to use the |attr filter to get a reference to a string's plain format method, bypassing the sandbox. After the fix, the |attr filter no longer bypasses the environment's attribute lookup. This vulnerability is fixed in 3.1.6.

CVSS 4.0 · 5.4 Medium EPSS < 1% KEV · Not listed
CVE-2025-24855

libxslt: Use-After-Free in libxslt numbers.c

numbers.c in libxslt before 1.1.43 has a use-after-free because, in nested XPath evaluations, an XPath context node can be modified but never restored. This is related to xsltNumberFormatGetValue, xsltEvalXPathPredicate, xsltEvalXPathStringNs, and xsltComputeSortResultInternal.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2025-24928

libxml2: Stack-based buffer overflow in xmlSnprintfElements of libxml2

libxml2 before 2.12.10 and 2.13.x before 2.13.6 has a stack-based buffer overflow in xmlSnprintfElements in valid.c. To exploit this, DTD validation must occur for an untrusted document or untrusted DTD. NOTE: this is similar to CVE-2017-9047.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
CVE-2023-42875

webkitgtk: Processing web content may lead to arbitrary code execution

Processing web content may lead to arbitrary code execution. This issue is fixed in iOS 17 and iPadOS 17, macOS Sonoma 14, watchOS 10, tvOS 17, Safari 17. The issue was addressed with improved memory handling.

CVSS 3.1 · 7.3 High EPSS < 1% KEV · Not listed
Vendors
Products
Ipados Iphone Os Macos and 9 more
CVE-2023-42970

webkitgtk: Processing web content may lead to arbitrary code execution

A use-after-free issue was addressed with improved memory management. This issue is fixed in iOS 17 and iPadOS 17, macOS Sonoma 14, watchOS 10, tvOS 17, Safari 17. Processing web content may lead to arbitrary code execution.

CVSS 3.1 · 8.8 High EPSS < 1% KEV · Not listed
Vendors
Products
Ipados Iphone Os Macos and 9 more
CVE-2025-21587

openjdk: Better TLS connection support (Oracle CPU 2025-04)

Vulnerability in the Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition product of Oracle Java SE (component: JSSE). Supported versions that are affected are Oracle Java SE:8u441, 8u441-perf, 11.0.26, 17.0.14, 21.0.6, 24; Oracle GraalVM for JDK:17.0.14, 21.0.6, 24; Oracle GraalVM Enterprise Edition:20.3.17 and 21.3.13. Difficult to exploit vulnerability allows unauthenticated attacker with network access via multiple protocols to compromise Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition. Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition accessible data as well as unauthorized access to critical data or complete access to all Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition accessible data. Note: This vulnerability can be exploited by using APIs in the specified Component, e.g., through a web service which supplies data to the APIs. This vulnerability also applies to Java deployments, typically in clients running sandboxed Java Web Start applications or sandboxed Java applets, that load and run untrusted code (e.g., code that comes from the internet) and rely on the Java sandbox for security. CVSS 3.1 Base Score 7.4 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:N).

CVSS 3.1 · 7.4 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2019-1125

Windows Kernel Information Disclosure Vulnerability

An information disclosure vulnerability exists when certain central processing units (CPU) speculatively access memory. An attacker who successfully exploited the vulnerability could read privileged data across trust boundaries. To exploit this vulnerability, an attacker would have to log on to an affected system and run a specially crafted application. The vulnerability would not allow an attacker to elevate user rights directly, but it could be used to obtain information that could be used to try to compromise the affected system further. On January 3, 2018, Microsoft released an advisory and security updates related to a newly-discovered class of hardware vulnerabilities (known as Spectre) involving speculative execution side channels that affect AMD, ARM, and Intel CPUs to varying degrees. This vulnerability, released on August 6, 2019, is a variant of the Spectre Variant 1 speculative execution side channel vulnerability and has been assigned CVE-2019-1125. Microsoft released a security update on July 9, 2019 that addresses the vulnerability through a software change that mitigates how the CPU speculatively accesses memory. Note that this vulnerability does not require a microcode update from your device OEM.

CVSS 3.1 · 5.6 Medium EPSS 4.5% KEV · Not listed
Vendors
CVE-2025-21605

Redis DoS Vulnerability due to unlimited growth of output buffers abused by unauthenticated client

Redis is an open source, in-memory database that persists on disk. In versions starting at 2.6 and prior to 7.4.3, An unauthenticated client can cause unlimited growth of output buffers, until the server runs out of memory or is killed. By default, the Redis configuration does not limit the output buffer of normal clients (see client-output-buffer-limit). Therefore, the output buffer can grow unlimitedly over time. As a result, the service is exhausted and the memory is unavailable. When password authentication is enabled on the Redis server, but no password is provided, the client can still cause the output buffer to grow from "NOAUTH" responses until the system will run out of memory. This issue has been patched in version 7.4.3. An additional workaround to mitigate this problem without patching the redis-server executable is to block access to prevent unauthenticated users from connecting to Redis. This can be done in different ways. Either using network access control tools like firewalls, iptables, security groups, etc, or enabling TLS and requiring users to authenticate using client side certificates.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed
Vendors
Debian Lfprojects Redhat and 1 more
Products
CVE-2022-31107

Grafana account takeover via OAuth vulnerability

Grafana is an open-source platform for monitoring and observability. In versions 5.3 until 9.0.3, 8.5.9, 8.4.10, and 8.3.10, it is possible for a malicious user who has authorization to log into a Grafana instance via a configured OAuth IdP which provides a login name to take over the account of another user in that Grafana instance. This can occur when the malicious user is authorized to log in to Grafana via OAuth, the malicious user's external user id is not already associated with an account in Grafana, the malicious user's email address is not already associated with an account in Grafana, and the malicious user knows the Grafana username of the target user. If these conditions are met, the malicious user can set their username in the OAuth provider to that of the target user, then go through the OAuth flow to log in to Grafana. Due to the way that external and internal user accounts are linked together during login, if the conditions above are all met then the malicious user will be able to log in to the target user's Grafana account. Versions 9.0.3, 8.5.9, 8.4.10, and 8.3.10 contain a patch for this issue. As a workaround, concerned users can disable OAuth login to their Grafana instance, or ensure that all users authorized to log in via OAuth have a corresponding user account in Grafana linked to their email address.

CVSS 3.1 · 7.1 High EPSS 2.9% KEV · Not listed
CVE-2018-14634

kernel: Integer overflow in Linux's create_elf_tables function

An integer overflow flaw was found in the Linux kernel's create_elf_tables() function. An unprivileged local user with access to SUID (or otherwise privileged) binary could use this flaw to escalate their privileges on the system. Kernel versions 2.6.x, 3.10.x and 4.14.x are believed to be vulnerable.

CVSS 3.0 · 7.8 High EPSS 14.7% KEV · Listed
Vendors
Canonical F5 Linux and 3 more
CVE-2023-40550

Shim: out-of-bound read in verify_buffer_sbat()

An out-of-bounds read flaw was found in Shim when it tried to validate the SBAT information. This issue may expose sensitive data during the system's boot phase.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Products
CVE-2023-1393

xorg-x11-server: X.Org Server Overlay Window Use-After-Free Local Privilege Escalation Vulnerability

A flaw was found in X.Org Server Overlay Window. A Use-After-Free may lead to local privilege escalation. If a client explicitly destroys the compositor overlay window (aka COW), the Xserver would leave a dangling pointer to that window in the CompScreen structure, which will trigger a use-after-free later.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Products
CVE-2020-10188

telnet-server: no bounds checks in nextitem() function allows to remotely execute arbitrary code

utility.c in telnetd in netkit telnet through 0.17 allows remote attackers to execute arbitrary code via short writes or urgent data, because of a buffer overflow involving the netclear and nextitem functions.

CVSS 3.1 · 9.8 Critical EPSS 74.3% KEV · Not listed
Vendors
Products
Eos Debian Linux Fedora and 7 more
CVE-2024-32004

Git vulnerable to Remote Code Execution while cloning special-crafted local repositories

Git is a revision control system. Prior to versions 2.45.1, 2.44.1, 2.43.4, 2.42.2, 2.41.1, 2.40.2, and 2.39.4, an attacker can prepare a local repository in such a way that, when cloned, will execute arbitrary code during the operation. The problem has been patched in versions 2.45.1, 2.44.1, 2.43.4, 2.42.2, 2.41.1, 2.40.2, and 2.39.4. As a workaround, avoid cloning repositories from untrusted sources.

CVSS 3.1 · 8.2 High EPSS 1.4% KEV · Not listed
Vendors
Debian Fedoraproject Git and 2 more
Products
Debian Linux Fedora Git and 6 more
CVE-2024-37891

Proxy-Authorization request header isn't stripped during cross-origin redirects in urllib3

urllib3 is a user-friendly HTTP client library for Python. When using urllib3's proxy support with `ProxyManager`, the `Proxy-Authorization` header is only sent to the configured proxy, as expected. However, when sending HTTP requests *without* using urllib3's proxy support, it's possible to accidentally configure the `Proxy-Authorization` header even though it won't have any effect as the request is not using a forwarding proxy or a tunneling proxy. In those cases, urllib3 doesn't treat the `Proxy-Authorization` HTTP header as one carrying authentication material and thus doesn't strip the header on cross-origin redirects. Because this is a highly unlikely scenario, we believe the severity of this vulnerability is low for almost all users. Out of an abundance of caution urllib3 will automatically strip the `Proxy-Authorization` header during cross-origin redirects to avoid the small chance that users are doing this on accident. Users should use urllib3's proxy support or disable automatic redirects to achieve safe processing of the `Proxy-Authorization` header, but we still decided to strip the header by default in order to further protect users who aren't using the correct approach. We believe the number of usages affected by this advisory is low. It requires all of the following to be true to be exploited: 1. Setting the `Proxy-Authorization` header without using urllib3's built-in proxy support. 2. Not disabling HTTP redirects. 3. Either not using an HTTPS origin server or for the proxy or target origin to redirect to a malicious origin. Users are advised to update to either version 1.26.19 or version 2.2.2. Users unable to upgrade may use the `Proxy-Authorization` header with urllib3's `ProxyManager`, disable HTTP redirects using `redirects=False` when sending requests, or not user the `Proxy-Authorization` header as mitigations.

CVSS 3.1 · 4.4 Medium EPSS 1.1% KEV · Not listed
Vendors
Debian Netapp Python and 1 more