Search vulnerabilities

Results 222

Export CSV
CVE-2021-48019

Vyper before 0.2.9 Incorrect RETURNDATASIZE in create_forwarder_to Proxies

Vyper before 0.2.9 deploys forwarder proxies through the built-in create_forwarder_to function that report a fixed 4096-byte RETURNDATASIZE rather than the actual return data size. Calls through these proxies can yield corrupted data when a function returns more than 4096 bytes without return data sanitation, and fail strict return-size checks such as SafeERC20.safeTransfer.

CVSS 4.0 · 6.3 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-98906

net: lan966x: restore RX state on reload failure

In the Linux kernel, the following vulnerability has been resolved: net: lan966x: restore RX state on reload failure lan966x_fdma_reload() backs up rx->page_pool and rx->fdma before reallocating the RX resources for the new MTU. If the allocation fails, the restore path puts these fields back before restarting RX. However, the reload path also updates rx->page_order and rx->max_mtu before calling lan966x_fdma_rx_alloc(). These fields are not restored on failure, so RX can be restarted with the old pages, old FDMA state and old page pool, but with the page geometry from the failed new MTU. This can make the XDP path advertise a frame size derived from the new page_order while the actual RX pages still come from the old allocation. For example, after a failed reload to a jumbo MTU, xdp_init_buff() may be called with a frame size larger than the restored RX pages. lan966x_fdma_rx_alloc_page_pool() also registers the newly allocated page pool with each port's XDP RXQ before fdma_alloc_coherent() is called. If fdma_alloc_coherent() fails, the new page pool is destroyed, but the rollback path does not restore the per-port XDP RXQ mem model registration either. Save and restore rx->page_order and rx->max_mtu, and restore the old page pool registration for each port's XDP RXQ before RX is started again. This keeps the restored RX state consistent after a failed reload.

CVSS 3.1 · 4.1 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-20011

Multiple Cisco Products Snort 3 SMTP MIME Denial of Service Vulnerability

Multiple Cisco products are affected by a vulnerability in the Snort 3 SMTP MIME Decoder that could allow an unauthenticated, remote attacker to cause the Snort 3 Detection Engine to restart. This vulnerability is due to a lack of error checking when the MIME fields of the SMTP header are parsed. An attacker could exploit this vulnerability by sending crafted SMTP packets through an established connection to be parsed by Snort 3. A successful exploit could allow the attacker to cause a denial of service (DoS) condition when the Snort 3 Detection Engine unexpectedly restarts.

CVSS 3.1 · 5.8 Medium EPSS < 1% KEV · Not listed
Vendors
CVE-2026-53205

accel/ivpu: Add bounds checks for firmware log indices

In the Linux kernel, the following vulnerability has been resolved: accel/ivpu: Add bounds checks for firmware log indices Add validation that read and write indices in the firmware log buffer are within valid bounds (< data_size) before using them. If out-of-bounds indices are encountered (from firmware), clamp them to safe values instead of proceeding with invalid offsets. This prevents potential out-of-bounds buffer access when firmware supplies invalid log indices.

CVSS 3.1 · 7.1 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-92159

F´: TlmPacketizer copies oversized telemetry past configured channel slots and emits corrupted packetized telemetry

F´ (F Prime) is a framework that enables development and deployment of spaceflight and other embedded software applications. Prior to 4.3.0, Svc::TlmPacketizer TlmRecv_handler fixed-slot copy TlmRecv_handler copies val.getSize bytes into entry.channelSize storage without confirming that the runtime value fits. When a telemetry update for a configured channel carries a serialized value larger than that channel fixed slot, the copy overwrites adjacent channel fields and causes corrupted packetized telemetry to be emitted. This issue is fixed in version 4.3.0.

CVSS 3.1 · 6.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2025-58774

UEFI OOB Write and Buffer Overflow Vulnerabilities

AMI APTIOV contains vulnerabilities in BIOS where users may cause “Buffer Access with Incorrect Length Value” by local access. Successful exploitation of this vulnerability could lead to buffer overflows, memory corruption, and arbitrary code execution, and also impact Confidentiality, Integrity, and Availability.

CVSS 4.0 · 8.3 High EPSS < 1% KEV · Not listed
Vendors
Ami
Products
CVE-2026-63886

scsi: target: iscsi: Validate CHAP_R length before base64 decode

In the Linux kernel, the following vulnerability has been resolved: scsi: target: iscsi: Validate CHAP_R length before base64 decode chap_server_compute_hash() allocates client_digest as kzalloc(chap->digest_size) and then, for BASE64-encoded responses, passes chap_r directly to chap_base64_decode() without checking whether the input length could produce more than digest_size bytes of output. chap_base64_decode() writes to the destination unconditionally as long as there is input to consume. With MAX_RESPONSE_LENGTH set to 128 and the "0b" prefix stripped by extract_param(), up to 127 base64 characters can reach the decoder. 127 characters decode to 95 bytes. For SHA-256 (digest_size=32) this overflows client_digest by 63 bytes; for MD5 (digest_size=16) the overflow is 79 bytes. The length check at line 344 fires after the write has already happened. The HEX branch in the same switch statement already validates the length up front. Apply the same approach to the BASE64 branch: strip trailing base64 padding characters, then reject any input whose data length exceeds DIV_ROUND_UP(digest_size * 4, 3) before calling the decoder. Stripping trailing '=' before the comparison handles both padded and unpadded encodings. chap_base64_decode() already returns early on '=', so the full original string is still passed to the decoder unchanged. The mutual CHAP path decodes CHAP_C into initiatorchg_binhex, which is kzalloc(CHAP_CHALLENGE_STR_LEN). extract_param() caps initiatorchg at CHAP_CHALLENGE_STR_LEN characters, so at most CHAP_CHALLENGE_STR_LEN-1 base64 characters reach the decoder. The maximum decoded size, DIV_ROUND_UP((CHAP_CHALLENGE_STR_LEN-1) * 3, 4), is less than CHAP_CHALLENGE_STR_LEN, so no overflow is possible there. A comment is added at the call site to document this.

CVSS 3.1 · 9.8 Critical EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-74752

sctp: validate cookie AUTH state before use

In the Linux kernel, the following vulnerability has been resolved: sctp: validate cookie AUTH state before use When cookie authentication is disabled, COOKIE_ECHO restores fixed-size AUTH fields directly from peer-controlled cookie bytes. A forged RANDOM length, HMAC list, or CHUNKS list can then reach association consumers with lengths or identifiers that were never validated against the local backing arrays. A forged RANDOM length can cause out-of-bounds reads during key-vector construction. A forged HMAC identifier also caused a 32-byte write past a zero-length AUTH chunk, providing a primitive for a local privilege escalation chain. Validate the cookie's RANDOM, HMACS, and CHUNKS parameters at the cookie trust boundary before copying them into the association. Reject invalid types, malformed lengths, unsupported HMAC identifiers, HMAC lists without SHA1, and forbidden chunk ids.

CVSS 3.1 · 9.8 Critical EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-74697

bnxt_en: Disable EOP for TPA on all chips to prevent data corruption

In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Disable EOP for TPA on all chips to prevent data corruption EOP (End of frame padding) on the AGG ring may cause overlapping of zero padding at the end of one segment with the next segment's data. If Relaxed Ordering (RO) is enabled, the zero padding may overwrite valid data in the next segment and corrupt the data. Older chips (P5 and older) do not automatically disable RO when EOP is enabled. On some ARM systems, data corruption was reported on 57508 (P5) chips with RO enabled. Always disable EOP on all chips on the AGG rings when TPA is enabled to fix the data corruption.

CVSS 3.1 · 8.2 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-72497

RDMA/bnxt_re: Add a max slot check for SQ

In the Linux kernel, the following vulnerability has been resolved: RDMA/bnxt_re: Add a max slot check for SQ The variable WQE mode must be validated against the maximum slots supported by HW. The max supported value is 64K. Adding a max and min check and fail if user supplied value is more than the max supported and zero.

CVSS 3.1 · 8.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-64159

netfs: Fix zeropoint update where i_size > remote_i_size

In the Linux kernel, the following vulnerability has been resolved: netfs: Fix zeropoint update where i_size > remote_i_size Fix the update of the zero point[*] by netfs_release_folio() when there is uncommitted data in the pagecache beyond the folio being released but the on-server EOF is in this folio (ie. i_size > remote_i_size). The update needs to limit zero_point to remote_i_size, not i_size as i_size is a local phenomenon reflecting updates made locally to the pagecache, not stuff written to the server. remote_i_size tracks the server's i_size. [*] The zero point is the file position from which we can assume that the server will just return zeros, so we can avoid generating reads. Note that netfs_invalidate_folio() probably doesn't need fixing as zero_point should be updated by setattr after truncation or fallocate. Found with: fsx -q -N 1000000 -p 10000 -o 128000 -l 600000 \ /xfstest.test/junk --replay-ops=junk.fsxops using the following as junk.fsxops: truncate 0x0 0x1bbae 0x82864 write 0x3ef2e 0xf9c8 0x1bbae write 0x67e05 0xcb5a 0x4e8f6 mapread 0x57781 0x85b6 0x7495f copy_range 0x5d3d 0x10329 0x54fac 0x7495f write 0x64710 0x1c2b 0x7495f mapread 0x64000 0x1000 0x7495f on cifs with the default cache option. It shows read-gaps on folio 0x64 failing with a short read (ie. it hits EOF) if the FMODE_READ check is commented out in netfs_perform_write(): if (//(file->f_mode & FMODE_READ) || netfs_is_cache_enabled(ctx)) { and no fscache. This was initially found with the generic/522 xfstest.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-72041

espintcp: use sk_msg_free_partial to fix partial send

In the Linux kernel, the following vulnerability has been resolved: espintcp: use sk_msg_free_partial to fix partial send sk_msg_free_partial() ensures consistency of the skmsg at every iteration, without having to manually handle uncharges and offsets. This simplifies the code, and fixes some bugs in skmsg accounting when we don't send the full contents.

CVSS 3.1 · 9.8 Critical EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-72003

wifi: brcmfmac: cyw: fix heap overflow on a short auth frame

In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: cyw: fix heap overflow on a short auth frame brcmf_notify_auth_frame_rx() takes the frame length from the firmware event and copies the frame body with the management header offset subtracted: u32 mgmt_frame_len = e->datalen - sizeof(struct brcmf_rx_mgmt_data); ... memcpy(&mgmt_frame->u, frame, mgmt_frame_len - offsetof(struct ieee80211_mgmt, u)); The only length check is e->datalen >= sizeof(*rxframe), so mgmt_frame_len can be anything from 0 up. offsetof(struct ieee80211_mgmt, u) is 24. When mgmt_frame_len is below that, the subtraction wraps as an unsigned value to a huge length. The memcpy then runs far past the kzalloc'd buffer. A malicious or malfunctioning AP can make the frame short during the external SAE auth exchange, so this is a remotely triggered heap overflow. Reject frames shorter than the management header offset before the copy.

CVSS 3.1 · 8.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-68479

Bluetooth: btrtl: validate firmware patch bounds

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btrtl: validate firmware patch bounds rtlbt_parse_firmware() copies patch_length - 4 bytes before appending the firmware version. A malformed firmware patch shorter than the version field can make this subtraction underflow and turn the copy into an oversized read and write during Bluetooth setup. The existing patch_offset + patch_length check can also wrap on 32-bit architectures. Validate the patch length and range without arithmetic overflow before allocating or copying the patch.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-68451

s390/zcrypt: Validate length for CCA ECC private key requests

In the Linux kernel, the following vulnerability has been resolved: s390/zcrypt: Validate length for CCA ECC private key requests cca_ecc2protkey() derives the copy length for the CPRB parameter block directly from the length field in the key token. Reject the request early if the token length exceeds the available space in the parameter block.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-68446

drm/vmwgfx: Validate vmw_surface_metadata::array_size

In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: Validate vmw_surface_metadata::array_size This field comes from userspace and should be validated against specific limits depending on which Shader Model (SM) is available.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-68352

wifi: ath6kl: fix OOB read from firmware IE lengths in connect event

In the Linux kernel, the following vulnerability has been resolved: wifi: ath6kl: fix OOB read from firmware IE lengths in connect event The firmware-controlled beacon_ie_len, assoc_req_len, and assoc_resp_len fields in ath6kl_wmi_connect_event_rx() are not validated against the buffer length. Their sum (up to 765) can exceed the actual WMI event data, causing out-of-bounds reads during IE parsing and state corruption of wmi->is_wmm_enabled. Add a check that the total IE length fits within the buffer.

CVSS 3.1 · 8.3 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-68343

smb: client: validate DFS referral PathConsumed

In the Linux kernel, the following vulnerability has been resolved: smb: client: validate DFS referral PathConsumed parse_dfs_referrals() validates that the response contains the fixed referral entry array and, on for-next, the per-referral string offsets. However, the response also contains a PathConsumed value that is later used for DFS path parsing. If a malformed response provides a PathConsumed value larger than the search name, later DFS parsing can advance beyond the end of the path. Validate PathConsumed against the search name length before storing it in the parsed referral.

CVSS 3.1 · 9.1 Critical EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-64559

s390/pkey: Check length in PKEY_VERIFYPROTK ioctl

In the Linux kernel, the following vulnerability has been resolved: s390/pkey: Check length in PKEY_VERIFYPROTK ioctl Explicitly check the buffer length request structure provided by user-space and fail, if it exceeds the buffer size.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-64403

Bluetooth: L2CAP: validate option length before reading conf opt value

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: validate option length before reading conf opt value l2cap_get_conf_opt() derives the option length from the attacker-controlled opt->len field and immediately dereferences opt->val (as u8, get_unaligned_le16() or get_unaligned_le32(), or a raw pointer for the default case) before any caller has confirmed that opt->len bytes are present in the buffer. The callers (l2cap_parse_conf_req(), l2cap_parse_conf_rsp() and l2cap_conf_rfc_get()) only detect a malformed option afterwards, once the running length has gone negative, by which point the out-of-bounds read has already executed. An existing post-hoc length check keeps the garbage value from being consumed, so this is not a data leak in the current control flow. It is still a validate-after-use ordering bug: up to 4 bytes are read past the end of the buffer before it is known to contain them, and it is fragile to future changes in the callers. Fix it at the source. Pass the end of the buffer into l2cap_get_conf_opt() and refuse to touch opt->val unless the full option (header + value) fits. Each caller computes an end pointer once before the loop and checks the return value directly instead of inferring the error from a negative length.

CVSS 3.1 · 7.1 High EPSS < 1% KEV · Not listed
Vendors
Products