Search vulnerabilities

Results 365

Export CSV
CVE-2026-89808

drm/amdkfd: Fix the case that vm range is hole at svm_migrate_copy_to_vram

In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Fix the case that vm range is hole at svm_migrate_copy_to_vram When migration vm range is hole at cpu side(MIGRATE_PFN_MIGRATE set + MIGRATE_PFN_VALID unset) driver still allocates device pages. There is no dma map of src pages and migration. j is 0 and svm_migrate_copy_memory_gart() will return an uninitialized r. That can trigger out_free_vram_pages to drop all VRAM just set up. Initialize r and only call the last svm_migrate_copy_memory_gart if j > 0. Current code postponed the last page to the final copy. This patch flushes on the last page when reach to the end of current drm_buddy_block; avoids another svm_migrate_copy_memory_gart.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-112898

Pillow: Image.quantize() with empty palette leaks uninitialized stack memory

Pillow is a Python imaging library. From 9.1.0 until 13.0.0, Pillow can disclose uninitialized stack memory when Image.quantize() uses an empty palette. ImagingPaletteCacheUpdate() leaves a local cache array uninitialized when the palette has zero entries, and the conversion path emits those bytes as output pixel indices. An attacker who controls the palette image can obtain stack contents from a returned PNG or GIF. This can disclose addresses and stack-canary data without an out-of-bounds access, memory corruption, or process crash. This issue is fixed in version 13.0.0.

CVSS 4.0 · 6.9 Medium EPSS < 1% KEV · Not listed
Products
CVE-2026-112893

Pillow: Invalid free in FreeType glyph rendering when a stroker is active

Pillow is a Python imaging library. From 10.0.0 until 13.0.0, Pillow can free an invalid glyph pointer during FreeType rendering with an active stroker. If FT_Load_Glyph fails, cleanup may call FT_Done_Glyph on an uninitialized or stale glyph variable. An attacker can supply a malformed font as untrusted bytes to an application that draws text with a nonzero stroke width, forcing the glyph-load failure path. This can corrupt memory or crash the process. This issue is fixed in version 13.0.0.

CVSS 4.0 · 8.2 High EPSS < 1% KEV · Not listed
Products
CVE-2026-98929

macsec: initialize SecY before registering the netdevice

In the Linux kernel, the following vulnerability has been resolved: macsec: initialize SecY before registering the netdevice Creating a MACsec device with MAC offload over an LRO-capable lower device triggers a warning in rtmsg_ifinfo_build_skb() when IPv4 forwarding is enabled by default. register_netdevice() invokes inetdev_init(), which disables LRO and emits a NETDEV_FEAT_CHANGE notification. This reaches macsec_fill_info() before macsec_add_dev() initializes the SecY. key_len is still zero, so macsec_fill_info() returns -EMSGSIZE and trips the WARN_ON in rtmsg_ifinfo_build_skb(), even though the skb has enough space. Even without the warning, notifications during registration can report uninitialized SecY attributes, including the SCI. This ordering has existed since the driver was introduced. Initialize the SecY and apply the new-link attributes before registration. Move MAC address inheritance into macsec_newlink() so the SCI can also be initialized before registration-time notifications report it. Move the per-CPU statistics and metadata destination allocation into ndo_init(), and release partial allocations on failure.

CVSS 3.1 · 3.0 Low EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-92449

Binary resource loader: unbounded map_id from a theme file causes a heap out-of-bounds write in the GUIX-allocated arena

`_gx_binres_pixelmap_table_load()` in the GUIX binary resource (theme) loader indexes the pixelmap table with a value read verbatim from the resource file and never bounds it against the table size. A crafted theme drives a write of up to roughly 256 KB past the end of the table. The overflowed buffer is allocated by GUIX itself, through `_gx_system_memory_allocator`, rather than supplied by the caller, so the loader corrupts its own arena. The public API `gx_binres_theme_load()` takes no size parameter, so no amount of caller diligence prevents this. Reproduces in the shipped default configuration; `GX_BINARY_RESOURCE_SUPPORT` is enabled by default.

CVSS 4.0 · 6.8 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-98743

ASoC: codecs: rt1017-sdca-sdw: fix uninitialized stream_config->type

In the Linux kernel, the following vulnerability has been resolved: ASoC: codecs: rt1017-sdca-sdw: fix uninitialized stream_config->type stream_config is not initialized before being passed to sdw_stream_add_slave(). The type field may contain garbage and is later copied to stream->type by sdw_config_stream(). Zero-initialize stream_config so type defaults to SDW_STREAM_PCM. While at it, use snd_sdw_params_to_config() helper instead of open-coding the same logic.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-72501

RDMA/bnxt_re: Initialize dpi variable to zero

In the Linux kernel, the following vulnerability has been resolved: RDMA/bnxt_re: Initialize dpi variable to zero dpi is initialized only for BNXT_RE_ALLOC_WC_PAGE, but copied for all the cases. So initialize the dpi to 0.

CVSS n/a EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-94018

NetX Duo Web HTTP server releases an uninitialized packet pointer on the PUT Content-Length underflow path

The Web add-on's HTTP server dereferences and releases an uninitialized pointer when it detects a `Content-Length` underflow while processing a `PUT` request. The condition is reachable by an unauthenticated remote client with a single malformed request.

CVSS 4.0 · 8.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-113400

Uninitialized memory in the Audio/Video: cubeb component

Uninitialized memory in the Audio/Video: cubeb component. This vulnerability was fixed in Firefox 158.0.1 and Thunderbird 158.0.1.

CVSS 3.1 · 5.4 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-53374

drm/amdgpu: zero-initialize GART table on allocation

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: zero-initialize GART table on allocation GART TLB is flushed after unmapping but not after mapping. Since amdgpu_bo_create_kernel() does not zero-initialize the buffer, when a single PTE is written the TLB may speculatively load other uninitialized entries from the same cacheline. Those garbage entries can appear valid, and a subsequent write to another PTE in the same cacheline may cause the GPU to use a stale garbage PTE from the TLB. Fix this by calling memset_io() to zero-initialize the GART table with gart_pte_flags immediately after allocation. Using AMDGPU_GEM_CREATE_VRAM_CLEARED, SDMA-based clear will not work since SDMA needs GART to be initialized to work. (cherry picked from commit d9af8263b82b6eaa60c5718e0c6631c5037e4b24)

CVSS 3.1 · 8.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-52931

batman-adv: tp_meter: avoid use of uninit sender vars

In the Linux kernel, the following vulnerability has been resolved: batman-adv: tp_meter: avoid use of uninit sender vars batadv_tp_recv_ack() and batadv_tp_stop() are only valid for tp_vars in the BATADV_TP_SENDER role. When called with a BATADV_TP_RECEIVER role, it proceeds to read sender-only members that were never initialized, leading to undefined behavior. This can be triggered when a node that is currently acting as a receiver in an ongoing tp_meter session receives a malicious ACK packet. Guard against this by checking tp_vars->role immediately after the lookup and bailing out if it is not BATADV_TP_SENDER, before any of those members are accessed.

CVSS 3.1 · 9.8 Critical EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-84564

Uninitialized Memory Disclosure Through Malicious Image Processing

An uninitialized memory issue was addressed with improved memory initialization. This issue is fixed in iOS 26.7 and iPadOS 26.7, iOS 27 and iPadOS 27, macOS Golden Gate 27, macOS Sequoia 15.8, macOS Tahoe 26.7, tvOS 27, visionOS 27, watchOS 27. Processing a maliciously crafted image may result in disclosure of process memory.

CVSS 3.1 · 4.3 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-72020

ipvs: reset full ip_vs_seq structs in ip_vs_conn_new

In the Linux kernel, the following vulnerability has been resolved: ipvs: reset full ip_vs_seq structs in ip_vs_conn_new Commit 9a05475cebdd ("ipvs: avoid kmem_cache_zalloc in ip_vs_conn_new") changed ip_vs_conn_new() to allocate an ip_vs_conn object with kmem_cache_alloc(). The function then initializes many fields explicitly, but only resets in_seq.delta and out_seq.delta in the two struct ip_vs_seq members. That leaves init_seq and previous_delta uninitialized. This is normally harmless while the corresponding IP_VS_CONN_F_IN_SEQ or IP_VS_CONN_F_OUT_SEQ flag is clear. For connections learned from a sync message, however, ip_vs_proc_conn() preserves those flags from IP_VS_CONN_F_BACKUP_MASK and passes opt=NULL when the message omits IPVS_OPT_SEQ_DATA. In that case the new connection can be hashed with SEQ flags set but with the rest of in_seq/out_seq still containing stale slab data. When a packet for such a connection is later handled by an IPVS application helper, vs_fix_seq() and vs_fix_ack_seq() use previous_delta and init_seq to rewrite TCP sequence numbers. A malformed sync message can therefore make forwarded packets carry stale slab bytes in their TCP seq/ack numbers, and can also corrupt the forwarded TCP flow. Reset both struct ip_vs_seq members completely before publishing the connection. This matches the existing "reset struct ip_vs_seq" comment and keeps the sequence-adjustment gates inactive unless valid sequence data is installed later.

CVSS 3.1 · 9.8 Critical EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-64576

nexthop: initialize extack in nh_res_bucket_migrate()

In the Linux kernel, the following vulnerability has been resolved: nexthop: initialize extack in nh_res_bucket_migrate() nh_res_bucket_migrate() passes an uninitialized netlink_ext_ack to call_nexthop_res_bucket_notifiers(). When nh_notifier_res_bucket_info_init() fails (e.g. the kzalloc returns -ENOMEM), the error is propagated back before any notifier sets extack._msg, and the error path formats the stale pointer with pr_err_ratelimited("%s\n", extack._msg). With CONFIG_INIT_STACK_NONE this dereferences uninitialized stack memory: Oops: general protection fault, probably for non-canonical address ... KASAN: maybe wild-memory-access in range [...] RIP: 0010:string (lib/vsprintf.c:730) vsnprintf (lib/vsprintf.c:2945) _printk (kernel/printk/printk.c:2504) nh_res_bucket_migrate (net/ipv4/nexthop.c:1816) nh_res_table_upkeep (net/ipv4/nexthop.c:1866) rtm_new_nexthop (net/ipv4/nexthop.c:3323) rtnetlink_rcv_msg (net/core/rtnetlink.c:7076) netlink_sendmsg (net/netlink/af_netlink.c:1900) Kernel panic - not syncing: Fatal exception Zero-initialize extack so _msg is NULL on error paths that never set it.

CVSS 3.1 · 7.1 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-64413

netfilter: ebtables: zero chainstack array

In the Linux kernel, the following vulnerability has been resolved: netfilter: ebtables: zero chainstack array sashiko reports: looking at ebtables table translation, could a sparse cpu_possible_mask lead to an uninitialized pointer free? If cpu_possible_mask is sparse (for example, CPU 0 and CPU 2 are possible, but CPU 1 is not), the allocation loop skips CPU 1. If vmalloc_node() fails at CPU 2, the cleanup loop will blindly decrement and call vfree() on newinfo->chainstack[1]. Not a real-world bug, such allocation isn't expected to fail in the first place.

CVSS 3.1 · 7 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-43408

ceph: add a bunch of missing ceph_path_info initializers

In the Linux kernel, the following vulnerability has been resolved: ceph: add a bunch of missing ceph_path_info initializers ceph_mdsc_build_path() must be called with a zero-initialized ceph_path_info parameter, or else the following ceph_mdsc_free_path_info() may crash. Example crash (on Linux 6.18.12): virt_to_cache: Object is not a Slab page! WARNING: CPU: 184 PID: 2871736 at mm/slub.c:6732 kmem_cache_free+0x316/0x400 [...] Call Trace: [...] ceph_open+0x13d/0x3e0 do_dentry_open+0x134/0x480 vfs_open+0x2a/0xe0 path_openat+0x9a3/0x1160 [...] cache_from_obj: Wrong slab cache. names_cache but object is from ceph_inode_info WARNING: CPU: 184 PID: 2871736 at mm/slub.c:6746 kmem_cache_free+0x2dd/0x400 [...] kernel BUG at mm/slub.c:634! Oops: invalid opcode: 0000 [#1] SMP NOPTI RIP: 0010:__slab_free+0x1a4/0x350 Some of the ceph_mdsc_build_path() callers had initializers, but others had not, even though they were all added by commit 15f519e9f883 ("ceph: fix race condition validating r_parent before applying state"). The ones without initializer are suspectible to random crashes. (I can imagine it could even be possible to exploit this bug to elevate privileges.) Unfortunately, these Ceph functions are undocumented and its semantics can only be derived from the code. I see that ceph_mdsc_build_path() initializes the structure only on success, but not on error. Calling ceph_mdsc_free_path_info() after a failed ceph_mdsc_build_path() call does not even make sense, but that's what all callers do, and for it to be safe, the structure must be zero-initialized. The least intrusive approach to fix this is therefore to add initializers everywhere.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-43303

mm/page_alloc: clear page->private in free_pages_prepare()

In the Linux kernel, the following vulnerability has been resolved: mm/page_alloc: clear page->private in free_pages_prepare() Several subsystems (slub, shmem, ttm, etc.) use page->private but don't clear it before freeing pages. When these pages are later allocated as high-order pages and split via split_page(), tail pages retain stale page->private values. This causes a use-after-free in the swap subsystem. The swap code uses page->private to track swap count continuations, assuming freshly allocated pages have page->private == 0. When stale values are present, swap_count_continued() incorrectly assumes the continuation list is valid and iterates over uninitialized page->lru containing LIST_POISON values, causing a crash: KASAN: maybe wild-memory-access in range [0xdead000000000100-0xdead000000000107] RIP: 0010:__do_sys_swapoff+0x1151/0x1860 Fix this by clearing page->private in free_pages_prepare(), ensuring all freed pages have clean state regardless of previous use.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-43139

xfrm6: fix uninitialized saddr in xfrm6_get_saddr()

In the Linux kernel, the following vulnerability has been resolved: xfrm6: fix uninitialized saddr in xfrm6_get_saddr() xfrm6_get_saddr() does not check the return value of ipv6_dev_get_saddr(). When ipv6_dev_get_saddr() fails to find a suitable source address (returns -EADDRNOTAVAIL), saddr->in6 is left uninitialized, but xfrm6_get_saddr() still returns 0 (success). This causes the caller xfrm_tmpl_resolve_one() to use the uninitialized address in xfrm_state_find(), triggering KMSAN warning: ===================================================== BUG: KMSAN: uninit-value in xfrm_state_find+0x2424/0xa940 xfrm_state_find+0x2424/0xa940 xfrm_resolve_and_create_bundle+0x906/0x5a20 xfrm_lookup_with_ifid+0xcc0/0x3770 xfrm_lookup_route+0x63/0x2b0 ip_route_output_flow+0x1ce/0x270 udp_sendmsg+0x2ce1/0x3400 inet_sendmsg+0x1ef/0x2a0 __sock_sendmsg+0x278/0x3d0 __sys_sendto+0x593/0x720 __x64_sys_sendto+0x130/0x200 x64_sys_call+0x332b/0x3e70 do_syscall_64+0xd3/0xf80 entry_SYSCALL_64_after_hwframe+0x77/0x7f Local variable tmp.i.i created at: xfrm_resolve_and_create_bundle+0x3e3/0x5a20 xfrm_lookup_with_ifid+0xcc0/0x3770 ===================================================== Fix by checking the return value of ipv6_dev_get_saddr() and propagating the error.

CVSS 3.1 · 8.6 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-43055

scsi: target: file: Use kzalloc_flex for aio_cmd

In the Linux kernel, the following vulnerability has been resolved: scsi: target: file: Use kzalloc_flex for aio_cmd The target_core_file doesn't initialize the aio_cmd->iocb for the ki_write_stream. When a write command fd_execute_rw_aio() is executed, we may get a bogus ki_write_stream value, causing unintended write failure status when checking iocb->ki_write_stream > max_write_streams in the block device. Let's just use kzalloc_flex when allocating the aio_cmd and let ki_write_stream=0 to fix this issue.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-31435

netfs: Fix read abandonment during retry

In the Linux kernel, the following vulnerability has been resolved: netfs: Fix read abandonment during retry Under certain circumstances, all the remaining subrequests from a read request will get abandoned during retry. The abandonment process expects the 'subreq' variable to be set to the place to start abandonment from, but it doesn't always have a useful value (it will be uninitialised on the first pass through the loop and it may point to a deleted subrequest on later passes). Fix the first jump to "abandon:" to set subreq to the start of the first subrequest expected to need retry (which, in this abandonment case, turned out unexpectedly to no longer have NEED_RETRY set). Also clear the subreq pointer after discarding superfluous retryable subrequests to cause an oops if we do try to access it.

CVSS 3.1 · 8.8 High EPSS < 1% KEV · Not listed
Vendors
Products