Search vulnerabilities

Results 12,136

Export CSV
CVE-2026-74399

evm: terminate and bound the evm_xattrs read buffer

In the Linux kernel, the following vulnerability has been resolved: evm: terminate and bound the evm_xattrs read buffer evm_read_xattrs() allocates size + 1 bytes, fills them from the list of enabled xattrs, and then passes strlen(temp) to simple_read_from_buffer(). When no configured xattrs are enabled, the fill loop stores nothing and temp[0] remains uninitialized, so strlen() reads beyond initialized memory. Explicitly terminate the buffer after allocation, use snprintf() for each formatted line, and pass the accumulated length, without risk of truncation, to simple_read_from_buffer().

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-74346

RDMA/irdma: Fix OOB read during CQ MR registration

In the Linux kernel, the following vulnerability has been resolved: RDMA/irdma: Fix OOB read during CQ MR registration Sashiko pointed out an unrelated bug during a previous patch: https://sashiko.dev/#/patchset/20260512183852.614045-1-jmoroni%40google.com This change fixes the bug by eliminating the cqmr->split field which was not being set properly and instead just checks the CQ resize feature flag directly. The cqmr->split field essentially tracks whether IRDMA_FEATURE_CQ_RESIZE is set, but it was not being set until CQ creation time, which is _after_ CQ memory registration (the only other place where it is referenced). As a result, it would always be false during MR registration and would therefore cause irdma_handle_q_mem to populate cqmr->shadow even for GEN_2 HW and beyond: cqmr->shadow = (dma_addr_t)arr[req->cq_pages]; The issue is that for GEN_2 and beyond, req->cq_pages may be exactly equal to iwmr->page_cnt and therefore equal to the size of arr, which would cause an OOB read by one.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-72396

hwmon: adm1275: Prevent reading uninitialized stack

In the Linux kernel, the following vulnerability has been resolved: hwmon: adm1275: Prevent reading uninitialized stack While adding support for the ROHM BD127X0 hot-swap controllers, sashiko reported an error in device-name comparison, which can lead to reading uninitialized stack memory. Quoting Sashiko: This is a pre-existing issue, but I noticed that just before this block in adm1275_probe(), there might be an out-of-bounds stack read: ret = i2c_smbus_read_block_data(client, PMBUS_MFR_MODEL, block_buffer); if (ret < 0) { ... } for (mid = adm1275_id; mid->name[0]; mid++) { if (!strncasecmp(mid->name, block_buffer, strlen(mid->name))) break; } Since i2c_smbus_read_block_data() reads up to 32 bytes into the uninitialized stack array block_buffer without appending a null terminator, strncasecmp() could read past the valid bytes returned in ret. For example, if the device returns a shorter string like "adm12", checking it against "adm1275" up to the length of "adm1275" will continue reading into uninitialized stack bounds. Prevent reading uninitialized memory by zeroing the stack array.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-72241

leds: uleds: Fix potential buffer overread

In the Linux kernel, the following vulnerability has been resolved: leds: uleds: Fix potential buffer overread The name string supplied by userspace is not guaranteed to be null-terminated, so using strchr() on it might result in a buffer overread. The same thing will happen when said string is used by the LED class device. Fix this by using strnchr() instead and explicitly check that the name string is properly null-terminated.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-68368

usb: gadget: f_ncm: validate datagram bounds in ncm_unwrap_ntb()

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_ncm: validate datagram bounds in ncm_unwrap_ntb() When unpacking host-supplied NTBs, ncm_unwrap_ntb() checks datagram length against frame_max but does not verify that the datagram fits within the declared block length. Additionally, when decoding multiple NTBs from a single socket buffer, subsequent block lengths are not checked against the actual remaining buffer data. With these checks missing, a malicious USB host can specify datagram offsets and lengths that point beyond the block, or supply secondary NTB headers declaring lengths larger than the buffer. skb_put_data() then copies adjacent kernel memory from skb_shared_info into the network skb. Fix this by verifying that sufficient buffer space remains for the NTB header before parsing, handling zero-length block declarations, ensuring that block lengths never exceed the remaining buffer space, and verifying that each datagram payload stays strictly within the block boundary.

CVSS 3.1 · 5.7 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-68351

wifi: carl9170: bound memcpy length in cmd callback to prevent OOB read

In the Linux kernel, the following vulnerability has been resolved: wifi: carl9170: bound memcpy length in cmd callback to prevent OOB read When the firmware sends a command response with a length mismatch, carl9170_cmd_callback() logs the mismatch and calls carl9170_restart() but then falls through to memcpy(ar->readbuf, buffer + 4, len - 4). Since len comes from the firmware and can exceed ar->readlen, this copies more data than the readbuf was allocated for. Bound the memcpy to min(len - 4, ar->readlen) so that the response is still completed -- avoiding repeated restarts from queued garbage -- while preventing an overread past the response buffer.

CVSS 3.1 · 5.4 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-68350

wifi: carl9170: fix OOB read from off-by-two in TX status handler

In the Linux kernel, the following vulnerability has been resolved: wifi: carl9170: fix OOB read from off-by-two in TX status handler The bounds check in carl9170_tx_process_status() uses `i > ((cmd->hdr.len / 2) + 1)` which is off by two, allowing 2 extra iterations past valid _tx_status entries when the firmware- controlled hdr.ext exceeds hdr.len/2. Fix by using the correct comparison `i >= (cmd->hdr.len / 2)`.

CVSS 3.1 · 5.9 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-68279

drm/dp/mst: fix OOB reads in remote DPCD/I2C sideband reply parsers

In the Linux kernel, the following vulnerability has been resolved: drm/dp/mst: fix OOB reads in remote DPCD/I2C sideband reply parsers drm_dp_sideband_parse_remote_dpcd_read() reads num_bytes from the raw message and then unconditionally does: memcpy(bytes, &raw->msg[idx], num_bytes); without checking that idx + num_bytes <= raw->curlen. raw->msg[] is 256 bytes; if a malicious or misbehaving MST hub sets num_bytes larger than the remaining payload, the memcpy reads past the received data into whatever follows in raw->msg[]. drm_dp_sideband_parse_remote_i2c_read_ack() has the same flaw (noted with a /* TODO check */ comment since the code was introduced). Fix both functions by using a single combined check (idx + num_bytes > curlen) before each memcpy. Since num_bytes is u8, it is always >= 0, so this strictly subsumes the simpler idx > curlen form and no separate step is needed. [added missing fixes tag]

CVSS 3.1 · 5.0 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-68277

drm/dp/mst: fix OOB reads on 2-byte fields in sideband reply parsers

In the Linux kernel, the following vulnerability has been resolved: drm/dp/mst: fix OOB reads on 2-byte fields in sideband reply parsers Three sideband reply parsers read 16-bit fields as: val = (raw->msg[idx] << 8) | (raw->msg[idx+1]); and check bounds only after the fact. When idx == raw->curlen, raw->msg[idx+1] reads one byte past the received message data into the following struct fields (curchunk_len, curchunk_idx, curlen). Affected functions: - drm_dp_sideband_parse_enum_path_resources_ack() full_payload_bw_number and avail_payload_bw_number fields - drm_dp_sideband_parse_allocate_payload_ack() allocated_pbn field - drm_dp_sideband_parse_query_payload_ack() allocated_pbn field Fix by using a single combined check (idx + 2 > curlen) before each 2-byte read. Since the check is strictly tighter than idx > curlen, no separate step is needed. [added fixes tag]

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-68190

staging: rtl8723bs: fix OOB reads in rtw_get_wps_ie()

In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix OOB reads in rtw_get_wps_ie() rtw_get_wps_ie() iterates over IE data from network frames without validating that the IE header and payload fit within the remaining buffer before reading them. Specifically: - in_ie[cnt + 1] is read without checking cnt + 1 < in_len - memcmp(&in_ie[cnt + 2], ...) accesses cnt + 2 without bounds check - in_ie[cnt + 1] is used as length without verifying payload fits Add bounds checks at the top of the loop body to break early if fewer than 2 bytes remain for the IE header, or if the declared payload extends past the end of the buffer. Also require at least 4 bytes of payload before comparing the WPS OUI.

CVSS 3.1 · 5.9 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-68187

exec: fix unsigned loop counter wrap in transfer_args_to_stack()

In the Linux kernel, the following vulnerability has been resolved: exec: fix unsigned loop counter wrap in transfer_args_to_stack() The stop value is derived from bprm->p >> PAGE_SHIFT. The index variable is an unsigned long. If bprm->p drops below PAGE_SIZE and stop becomes zero the loop condition index >= stop is always true. After the index == 0 iteration the decrement wraps to ULONG_MAX and bprm->page[ULONG_MAX] reads sizeof(void *) bytes in front of the array. The pointer has wrapped to -1. That garbage pointer is then passed to kmap_local_page() and PAGE_SIZE bytes are copied from wherever that lands into the stack of the process being created. And the loop doesn't terminate either... Getting there only requires bprm->p < PAGE_SIZE. On !MMU bprm_set_stack_limit() and bprm_hit_stack_limit() are empty. So the only constraint on how far bprm->p is pushed down is valid_arg_len(), i.e. that each individual string still fits in what is left. bprm->p starts at PAGE_SIZE * MAX_ARG_PAGES - sizeof(void *) so a single argument or environment string of a little over 31 pages leaves it in the first page: Oops - load access fault [#1] CPU: 0 UID: 0 PID: 1 Comm: victim Not tainted 7.2.0-rc4 #1 epc : __memcpy+0xd4/0xf8 ra : transfer_args_to_stack+0xaa/0xae s4 : ffffffffffffffff s2 : 0000000000000000 a1 : ffffffdc98000000 a2 : 0000000000001000 status: 0000000a00001880 badaddr: ffffffdc98000000 cause: 0000000000000005 [<801a5324>] __memcpy+0xd4/0xf8 [<800d5f6a>] load_flat_binary+0x43a/0x65e [<800a2de4>] bprm_execve+0x1d4/0x316 [<800a351a>] do_execveat_common+0x12e/0x138 [<800a3d44>] __riscv_sys_execve+0x38/0x4e Kernel panic - not syncing: Fatal exception in interrupt This is an arcane bug but we should still fix it. Count down from MAX_ARG_PAGES so the loop ends when index reaches stop, stop == 0 included. The iterations performed are unchanged for every other value of stop. Only CONFIG_MMU=n builds are affected, transfer_args_to_stack() is used by binfmt_flat and binfmt_elf_fdpic on nommu only. The loop predates git history. commit 7e7ec6a93434 ("elf_fdpic_transfer_args_to_stack(): make it generic") only moved it from binfmt_elf_fdpic.c into fs/exec.c and narrowed the copy to the used part of the first page. The condition and the decrement are unchanged from 2.6.12-rc2.

CVSS 3.1 · 4.7 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-68184

cdrom: fix stack out-of-bounds read in CDROMVOLCTRL

In the Linux kernel, the following vulnerability has been resolved: cdrom: fix stack out-of-bounds read in CDROMVOLCTRL mmc_ioctl_cdrom_volume() first reads the audio control mode page into a 32-byte stack buffer with cgc->buflen set to 24. If the device reports a block descriptor, the function increases cgc->buflen to include that descriptor and reads the page again. For CDROMVOLCTRL, the function then builds a MODE SELECT parameter list by moving cgc->buffer forward by offset - 8 bytes. This drops the block descriptor from the outgoing payload and leaves a new 8-byte mode parameter header in front of the audio control page. However, cgc->buflen is left unchanged. With a standard 8-byte block descriptor, cgc->buffer points at buffer + 8 but cgc->buflen remains 32. cdrom_mode_select() therefore asks the low level packet path to write 32 bytes from that adjusted pointer, reading 8 bytes past the end of the 32-byte stack buffer. This is not hit by CDROMVOLREAD, and CDROMVOLCTRL only triggers it on drives that return a non-zero block descriptor length, which helps explain why it has gone unnoticed. The overread is also sent to the device as extra MODE SELECT payload, so it may not produce an obvious local failure. Reduce cgc->buflen by the same amount as the buffer pointer adjustment so the MODE SELECT transfer covers only the intended parameter list.

CVSS 3.1 · 4.7 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-64351

net: usb: kalmia: bound RX frame length in kalmia_rx_fixup()

In the Linux kernel, the following vulnerability has been resolved: net: usb: kalmia: bound RX frame length in kalmia_rx_fixup() kalmia_rx_fixup() computes usb_packet_length = skb->len - (2 * KALMIA_HEADER_LENGTH) as a u16, guarded only by a pre-loop check that skb->len is at least KALMIA_HEADER_LENGTH, which is 6. A device can deliver a short bulk-IN frame with skb->len in the 6 to 11 range, or leave a short trailing remainder on a later loop iteration. Either case underflows usb_packet_length to about 65530. That bypasses the usb_packet_length < ether_packet_length truncation path. The device-supplied ether_packet_length, a le16 up to 65535 read from header_start[2], then drives a memcmp() and the following skb_trim() and skb_pull() past the end of the rx buffer. The rx buffer is hard_mtu * 10, which is 14000 bytes. That is an out of bounds read. Require both the start and end framing headers to be present before subtracting them, on every loop iteration.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-64347

usb: gadget: composite: fix dead empty check in the USB_DT_OTG handler

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: composite: fix dead empty check in the USB_DT_OTG handler The OTG branch of composite_setup() falls back to the first configuration when none is selected: if (cdev->config) config = cdev->config; else config = list_first_entry(&cdev->configs, struct usb_configuration, list); if (!config) goto done; ... memcpy(req->buf, config->descriptors[0], value); list_first_entry() never returns NULL. On an empty list it returns container_of() of the list head. So the "if (!config)" check is dead. When cdev->configs is empty, config points at the head inside struct usb_composite_dev. config->descriptors[0] reads whatever sits at that offset. The memcpy copies up to w_length bytes of it into the response buffer. cdev->configs can be empty in two cases. One is a teardown race on gadget unbind with a control transfer in flight. The other is a driver that sets is_otg before it adds a config. A reproducer that holds cdev->configs empty triggers a KASAN fault in this branch. Use list_first_entry_or_null() so the existing check does its job.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-64330

usb: typec: tcpm: Validate SVID index in svdm_consume_modes()

In the Linux kernel, the following vulnerability has been resolved: usb: typec: tcpm: Validate SVID index in svdm_consume_modes() In svdm_consume_modes(), the SVID value is read from pmdata->svids using pmdata->svid_index as an array index without bounds validation: paltmode->svid = pmdata->svids[pmdata->svid_index]; If pmdata->svid_index is driven beyond SVID_DISCOVERY_MAX (16), it results in an out-of-bounds read of the pmdata->svids array. Because pd_mode_data is embedded inside struct tcpm_port, indexing past svids reads into adjacent fields. In particular: - At index 16, it reads the altmodes count. - At index 18 and beyond, it reads into altmode_desc[], which contains partner-supplied SVDM Discovery Modes VDOs. By injecting a chosen SVID into altmode_desc[0].vdo and driving svid_index to 20, the partner can force paltmode->svid to be loaded with an arbitrary, partner- chosen SVID, which is then registered via typec_partner_register_altmode(). Fix this by validating that pmdata->svid_index is non-negative and strictly less than pmdata->nsvids before accessing the pmdata->svids array inside svdm_consume_modes().

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-64272

Input: mms114 - fix touch indexing for MMS134S and MMS136

In the Linux kernel, the following vulnerability has been resolved: Input: mms114 - fix touch indexing for MMS134S and MMS136 The MMS134S and MMS136 touch controllers have an event size of 6 bytes rather than 8 bytes. When __mms114_read_reg() reads the touch data packet from the device into the touch buffer, the events are packed tightly at 6-byte intervals. However, the driver iterates through the events using standard C array indexing (touch[index]), where each element is sizeof(struct mms114_touch) (8 bytes) apart. As a result, any touch events beyond the first one are read from incorrect offsets and parsed improperly. Fix this by explicitly calculating the byte offset for each touch event based on the device's specific event size.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-64237

Input: elan_i2c - validate firmware size before use

In the Linux kernel, the following vulnerability has been resolved: Input: elan_i2c - validate firmware size before use Ensure that the firmware file is large enough to contain the expected number of pages and the signature (which resides at the end of the firmware blob) before accessing them to prevent potential out-of-bounds reads.

CVSS 3.1 · 7.1 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-64225

octeontx2-af: CGX: add bounds check to cgx_speed_mbps index

In the Linux kernel, the following vulnerability has been resolved: octeontx2-af: CGX: add bounds check to cgx_speed_mbps index cgx_speed_mbps has 13 elements but RESP_LINKSTAT_SPEED can yield values 0-15. If it returns a value >= 13, this causes an out-of-bounds array access. Add a bounds check and default to speed 0 if the index is out of range.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-64186

iommu/amd: Remove latent out-of-bounds access in IOMMU debugfs

In the Linux kernel, the following vulnerability has been resolved: iommu/amd: Remove latent out-of-bounds access in IOMMU debugfs In iommu_mmio_write() and iommu_capability_write(), the variables dbg_mmio_offset and dbg_cap_offset are declared as int. However, they are populated using kstrtou32_from_user(). If a user provides a sufficiently large value, it can become a negative integer. Prior to this patch, the AMD IOMMU debugfs implementation was already protected by different mechanisms. 1. #define OFS_IN_SZ 8 ensures the user string <= 8 bytes, so e.g. 0xffffffff isn't a valid input. if (cnt > OFS_IN_SZ) return -EINVAL; 2. Implicit type promotion in iommu_mmio_write(), dbg_mmio_offset is int and iommu->mmio_phys_end is u64 if (dbg_mmio_offset > iommu->mmio_phys_end - sizeof(u64)) return -EINVAL; 3. The show handlers would currently catch the negative number and refuse to perform the read. Replace kstrtou32_from_user() with kstrtos32_from_user() to parse the input, and check for negative values to explicitly prevent out-of-bounds memory accesses directly in iommu_mmio_write() and iommu_capability_write().

CVSS 3.1 · 7.1 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-64121

net: ifb: report ethtool stats over num_tx_queues

In the Linux kernel, the following vulnerability has been resolved: net: ifb: report ethtool stats over num_tx_queues ifb_dev_init() allocates dp->tx_private to dev->num_tx_queues entries via kzalloc_objs(*txp, dev->num_tx_queues). Both IFB per-queue RX and TX stats live in those entries: ifb_xmit() updates txp->rx_stats using the skb queue mapping, ifb_ri_tasklet() updates txp->tx_stats, and ifb_stats64() aggregates both over dev->num_tx_queues. The ethtool stats callbacks instead size and walk the per-queue stats with dev->real_num_rx_queues and dev->real_num_tx_queues. With an asymmetric device where the RX queue count exceeds the TX queue count, for example: ip link add name ifb10 numtxqueues 1 numrxqueues 8 type ifb ethtool -S ifb10 ifb_get_ethtool_stats() indexes past the tx_private allocation and copies adjacent slab data through ETHTOOL_GSTATS. Use dev->num_tx_queues consistently for the stats strings, the stats count, and the stats data walks. This reports one RX stats group and one TX stats group for each backing ifb_q_private entry, which is the queue set IFB can actually populate. Reproduced under UML+KASAN at v7.1-rc2: BUG: KASAN: slab-out-of-bounds in ifb_fill_stats_data+0x3c/0xae Read of size 8 at addr 0000000062dbd228 by task ethtool/36 ifb_fill_stats_data+0x3c/0xae ifb_get_ethtool_stats+0xc0/0x129 __dev_ethtool+0x1ca5/0x363c dev_ethtool+0x123/0x1b3 dev_ioctl+0x56c/0x744 sock_do_ioctl+0x15f/0x1b2 sock_ioctl+0x4d5/0x50a sys_ioctl+0xd8b/0xde9 With the patch applied, the same UML+KASAN repro is silent and ethtool -S ifb10 reports only the stats backed by the single allocated tx_private entry.

CVSS 3.1 · 7.1 High EPSS < 1% KEV · Not listed
Vendors
Products