Search vulnerabilities

Results 1,973

Export CSV
CVE-2025-59107

Static Firmware Encryption Password in dormakaba access manager

Dormakaba provides the software FWServiceTool to update the firmware version of the Access Managers via the network. The firmware in some instances is provided in an encrypted ZIP file. Within this tool, the password used to decrypt the ZIP and extract the firmware is set statically and can be extracted. This password was valid for multiple observed firmware versions.

CVSS 4.0 · 8.5 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2025-59096

Weak Default Password in dormakaba Kaba exos 9300

The default password for the extended admin user mode in the application U9ExosAdmin.exe ("Kaba 9300 Administration") is hard-coded in multiple locations as well as documented in the locally stored user documentation.

CVSS 4.0 · 4.6 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2025-59095

Hard-coded Key for PIN Encryption in dormakaba Kaba exos 9300

The program libraries (DLL) and binaries used by exos 9300 contain multiple hard-coded secrets. One notable example is the function "EncryptAndDecrypt" in the library Kaba.EXOS.common.dll. This algorithm uses a simple XOR encryption technique combined with a cryptographic key (cryptoKey) to transform each character of the input string. However, it's important to note that this implementation does not provide strong encryption and should not be considered secure for sensitive data. It's more of a custom encryption approach rather than a common algorithm used in cryptographic applications. The key itself is static and based on the founder's name of the company. The functionality is for example used to encrypt the user PINs before storing them in the MSSQL database.

CVSS 4.0 · 6.8 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2025-59092

Unauthenticated RPC Service in dormakaba Kaba exos 9300

An RPC service, which is part of exos 9300, is reachable on port 4000, run by the process FSMobilePhoneInterface.exe. This service is used for interprocess communication between services and the Kaba exos 9300 GUI, containing status information about the Access Managers. Interacting with the service does not require any authentication. Therefore, it is possible to send arbitrary status information about door contacts etc. without prior authentication.

CVSS 4.0 · 8.7 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2025-59091

Hardcoded Legacy Accounts Allowing Control Over Access Managers in dormakaba Kaba exos 9300

Multiple hardcoded credentials have been identified, which are allowed to sign-in to the exos 9300 datapoint server running on port 1004 and 1005. This server is used for relaying status information from and to the Access Managers. This information, among other things, is used to graphically visualize open doors and alerts. However, controlling the Access Managers via this interface is also possible. To send and receive status information, authentication is necessary. The Kaba exos 9300 application contains hard-coded credentials for four different users, which are allowed to login to the datapoint server and receive as well as send information, including commands to open arbitrary doors.

CVSS 4.0 · 9.3 Critical EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2025-57602

Insufficient hardening of the proxyuser account in the AiKaan IoT management platform, combined with the use of a shared, hardcoded SSH private key, allows remote attackers to authenticate to the cloud controller, gain interactive shell access, and pivot into other connected IoT devices. This can lead to remote code execution, information disclosure, and privilege escalation across customer environments.

CVSS 3.1 · 9.8 Critical EPSS < 1% KEV · Not listed
Vendors
CVE-2025-57601

AiKaan Cloud Controller uses a single hardcoded SSH private key and the username `proxyuser` for remote terminal access to all managed IoT/edge devices. When an administrator initiates "Open Remote Terminal" from the AiKaan dashboard, the controller sends this same static private key to the target device. The device then uses it to establish a reverse SSH tunnel to a remote access server, enabling browser-based SSH access for the administrator. Because the same `proxyuser` account and SSH key are reused across all customer environments: - An attacker who obtains the key (e.g., by intercepting it in transit, extracting it from the remote access server, or from a compromised admin account) can impersonate any managed device. - They can establish unauthorized reverse SSH tunnels and interact with devices without the owner's consent. This is a design flaw in the authentication model: compromise of a single key compromises the trust boundary between the controller and devices.

CVSS 3.1 · 9.8 Critical EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2025-57578

An issue in H3C Magic M Device M2V100R006 allows a remote attacker to execute arbitrary code via the default password

CVSS 3.1 · 8 High EPSS < 1% KEV · Not listed
Vendors
H3c
Products
CVE-2025-57577

An issue in H3C Device R365V300R004 allows a remote attacker to execute arbitrary code via the default password. NOTE: the Supplier's position is that their "product lines enforce or clearly prompt users to change any initial credentials upon first use. At most, this would be a case of misconfiguration if an administrator deliberately ignored the prompts, which is outside the scope of CVE definitions."

CVSS 3.1 · 8 High EPSS < 1% KEV · Not listed
Vendors
H3c
Products
CVE-2025-53842

Use of hard-coded credentials issue exists in ZWX-2000CSW2-HN prior to 0.3.19 and ZWX-2000CS2-HN firmware all versions. If this vulnerability is exploited, an attacker may tamper with the settings of the device by obtaining the credentials. This vulnerability is caused by an insufficient fix for CVE-2024-39838.

CVSS 4.0 · 6.8 Medium EPSS < 1% KEV · Not listed
Vendors
—
Products
—
CVE-2025-5379

NuCom NC-WR744G Console Application hard-coded credentials

A vulnerability classified as critical was found in NuCom NC-WR744G 8.5.5 Build 20200530.307. This vulnerability affects unknown code of the component Console Application. The manipulation of the argument CMCCAdmin/useradmin/CUAdmin leads to hard-coded credentials. The attack can be initiated remotely. The vendor was contacted early about this disclosure but did not respond in any way.

CVSS 4.0 · 5.3 Medium EPSS < 1% KEV · Not listed
Vendors
—
Products
—
CVE-2025-41380

Injection vulnerability in Iridium Certus 700

Iridium Certus 700 version 1.0.1 has an embedded credentials vulnerability in the code. This vulnerability allows a local user to retrieve the SSH hash string.

CVSS 4.0 · 6.1 Medium EPSS < 1% KEV · Not listed
Vendors
—
Products
—
CVE-2023-26566

Sangoma FreePBX 1805 through 2203 on Linux contains hardcoded credentials for the Asterisk REST Interface (ARI), which allows remote attackers to reconfigure Asterisk and make external and internal calls via HTTP and WebSocket requests sent to the API.

CVSS 3.1 · 8.6 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2019-25322

Heatmiser Netmonitor 3.03 - Hardcoded Credentials

Heatmiser Netmonitor 3.03 contains a hardcoded credentials vulnerability in the networkSetup.htm page with predictable admin login credentials. Attackers can access the device by using the hard-coded username 'admin' and password 'admin' in the hidden form input fields.

CVSS 4.0 · 9.3 Critical EPSS < 1% KEV · Not listed
Vendors
CVE-2019-25291

INIM Electronics Smartliving SmartLAN/G/SI <=6.x Hard-coded Credentials Vulnerability

INIM Electronics Smartliving SmartLAN/G/SI <=6.x contains hard-coded credentials in its Linux distribution image that cannot be changed through normal device operations. Attackers can exploit these persistent credentials to log in and gain unauthorized system access across multiple SmartLiving device models.

CVSS 4.0 · 9.3 Critical EPSS < 1% KEV · Not listed
Vendors
CVE-2023-6198

Hard Coded Credential

Use of Hard-coded Credentials vulnerability in Baicells Snap Router BaiCE_BMI on EP3011 (User Passwords modules) allows unauthorized access to the device.

CVSS 3.1 · 9.3 Critical EPSS < 1% KEV · Not listed
Vendors
—
Products
—
CVE-2014-125115

Pandora FMS ≤ 5.0 SP2 Default Credential SQL Injection RCE

An unauthenticated SQL injection vulnerability exists in Pandora FMS version 5.0 SP2 and earlier. The mobile/index.php endpoint fails to properly sanitize user input in the loginhash_data parameter, allowing attackers to extract administrator credentials or active session tokens via crafted requests. This occurs because input is directly concatenated into an SQL query without adequate validation, enabling SQL injection. After authentication is bypassed, a second vulnerability in the File Manager component permits arbitrary PHP file uploads. The file upload functionality does not enforce MIME-type or file extension restrictions, allowing authenticated users to upload web shells into a publicly accessible directory and achieve remote code execution.

CVSS 4.0 · 10 Critical EPSS 2.6% KEV · Not listed
CVE-2014-125121

Array Networks vAPV and vxAG Default Credential Privilege Escalation

Array Networks vAPV (version 8.3.2.17) and vxAG (version 9.2.0.34) appliances are affected by a privilege escalation vulnerability caused by a combination of hardcoded SSH credentials (or SSH private key) and insecure permissions on a startup script. The devices ship with a default SSH login or a hardcoded DSA private key, allowing an attacker to authenticate remotely with limited privileges. Once authenticated, an attacker can overwrite the world-writable /ca/bin/monitor.sh script with arbitrary commands. Since this script is executed with elevated privileges through the backend binary, enabling the debug monitor via backend -c "debug monitor on" triggers execution of the attacker's payload as root. This allows full system compromise.

CVSS 4.0 · 10 Critical EPSS 1.5% KEV · Not listed
Vendors
Products
CVE-2024-2161

Use of Hard-coded Credentials in Kiloview NDI N series products API middleware

Use of Hard-coded Credentials in Kiloview NDI allows un-authenticated users to bypass authenticationThis issue affects Kiloview NDI N3, N3-s, N4, N20, N30, N40 and was fixed in Firmware version 2.02.0227 .

CVSS 3.1 · 9.8 Critical EPSS < 1% KEV · Not listed
Vendors
—
Products
—