Search vulnerabilities

Results 1,388

Export CSV
CVE-2026-90585

Renesas RA SCI UART driver: unacknowledged receive-error interrupt causes a permanent interrupt storm and CPU lockup

The Renesas RA SCI UART driver's receive-error ISR, uart_ra_sci_eri_isr() in drivers/serial/uart_renesas_ra_sci.c, acknowledged the error condition only when a Zephyr interrupt-driven callback had already been registered. With CONFIG_UART_INTERRUPT_DRIVEN=y and CONFIG_UART_ASYNC_API=n, if data->user_cb is NULL the ISR body is empty: the SCI error flags (SSR.ORER, SSR.FER, SSR.PER) are left set and the ICU event flag R_ICU->IELSR_b[eri_irq].IR is never cleared, so the interrupt re-pends immediately and the ISR is re-entered without end. The error interrupt is masked at boot by uart_ra_sci_init(), but FSP's R_SCI_UART_Open() unconditionally re-enables it, and uart_ra_sci_configure() - the back end of the public uart_configure() API, enabled by default via CONFIG_UART_USE_RUNTIME_CONFIGURE - performs a Close()/Open() pair without re-masking it. Any runtime uart_configure() therefore leaves the error interrupt live regardless of whether a callback has been set, as does calling uart_irq_err_enable() on its own. An instance used with the polling API, or the window between uart_configure() and uart_irq_callback_user_data_set(), thus runs with the error interrupt unmasked and no callback registered. The trigger is an ordinary receive line error - overrun, framing, parity, or a break condition - which is fully determined by the device attached to the serial link. A peer able to assert a break or transmit at a mismatched baud rate produces such an error at will, so a single frame is enough to enter the state. The impact is availability only: the CPU is captured in the re-entering ISR and never returns to thread context, hanging the entire system until an external reset or hardware watchdog fires. There is no memory corruption or information disclosure. Builds using the asynchronous UART API are unaffected, because the fall-through to FSP's sci_uart_eri_isr() clears both the error flags and the pending IRQ.

CVSS 3.1 · 4.6 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-63983

net/sched: fix packet loop on netem when duplicate is on

In the Linux kernel, the following vulnerability has been resolved: net/sched: fix packet loop on netem when duplicate is on When netem duplicates a packet it re-enqueues the copy at the root qdisc. If another netem sits in the tree the copy can be duplicated again, recursing until the stack or memory is exhausted. The original duplication guard temporarily zeroed q->duplicate around the re-enqueue, but that does not cover all cases because it is per-qdisc state shared across all concurrent enqueue paths and is not safe without additional locking. Use the skb tc_depth field introduced in an earlier patch: - increment it on the duplicate before re-enqueue - skip duplication for any skb whose tc_depth is already non-zero. This marks the packet itself rather than mutating qdisc state, therefore it is safe regardless of tree topology or concurrency.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-63982

net/sched: Fix ethx:ingress -> ethy:egress -> ethx:ingress mirred loop

In the Linux kernel, the following vulnerability has been resolved: net/sched: Fix ethx:ingress -> ethy:egress -> ethx:ingress mirred loop When mirred redirects to ingress (from either ingress or egress) the loop state from sched_mirred_dev array dev is lost because of 1) the packet deferral into the backlog and 2) the fact the sched_mirred_dev array is cleared. In such cases, if there was a loop we won't discover it. Here's a simple test to reproduce: ip a add dev port0 10.10.10.11/24 tc qdisc add dev port0 clsact tc filter add dev port0 egress protocol ip \ prio 10 matchall action mirred ingress redirect dev port1 tc qdisc add dev port1 clsact tc filter add dev port1 ingress protocol ip \ prio 10 matchall action mirred egress redirect dev port0 ping -c 1 -W0.01 10.10.10.10

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-63969

ipv6: fix possible infinite loop in rt6_fill_node()

In the Linux kernel, the following vulnerability has been resolved: ipv6: fix possible infinite loop in rt6_fill_node() Sashiko reported this issue [1]. Apply the same fix as commit f8d8ce1b515a ("ipv6: fix possible infinite loop in fib6_info_uses_dev()"). Writers holding tb6_lock can list_del_rcu(&rt->fib6_siblings) without waiting for RCU readers; rt->fib6_siblings.next then still points into the old ring and this softirq-side walker never reaches &rt->fib6_siblings, causing a CPU stall. fib6_del_route() always WRITE_ONCE()s rt->fib6_nsiblings to 0 before list_del_rcu(), so an inside-loop check is a reliable detach signal. [1] https://sashiko.dev/#/patchset/20260526020227.4857-1-jiayuan.chen%40linux.dev

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-118037

Uncontrolled Resource Consumption in Telerik Document Processing Libraries RadSpreadProcessing and RadSpreadStreamProcessing

In Progress® Telerik® Document Processing Libraries prior to version 2026.3.1027, uncontrolled recursion, infinite loop, unchecked loop condition and inefficient regular expression vulnerabilities in RadSpreadProcessing and RadSpreadStreamProcessing allow an unauthenticated attacker to terminate or hang the host process via a crafted XLSX or XLS workbook or formula.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed
Vendors
CVE-2026-118036

Uncontrolled Resource Consumption in Telerik Document Processing Libraries RadPdfProcessing and AI Document Summarization and Question Answering

In Progress® Telerik® Document Processing Libraries prior to version 2026.3.1027, uncontrolled recursion, infinite loop, inefficient algorithmic complexity and resource allocation vulnerabilities in RadPdfProcessing and AI document summarization and question answering allow an unauthenticated attacker to terminate or hang the host process via a crafted PDF document or document text submitted for summarization or question answering.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed
Vendors
CVE-2026-118035

Uncontrolled Resource Consumption in Telerik Document Processing Libraries RadWordsProcessing

In Progress® Telerik® Document Processing Libraries prior to version 2026.3.1027, uncontrolled recursion, inefficient algorithmic complexity and infinite loop vulnerabilities in RadWordsProcessing allow an unauthenticated attacker to terminate or hang the host process via a crafted DOCX, DOC, RTF or HTML document.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed
Vendors
CVE-2026-123604

Hickory DNS 0.26.0-beta.1 before 0.26.2 Resource Exhaustion DoS via NameServerPool::try_send TC-Retry Loop

Hickory DNS hickory-resolver 0.26.0-beta.1 before 0.26.2 contains an unbounded retry loop in NameServerPool::try_send, which re-queues truncated (TC) responses without checking the answering transport or counting iterations. A malicious authoritative server returning TC=1 on every transport keeps the resolver spinning on a persistent TCP connection until the 5-second request deadline expires, causing resource exhaustion.

CVSS 4.0 · 8.7 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-109832

Gnome-remote-desktop: busy-wait dos in vnc tls i/o handlers (gnutls_e_again / gnutls_e_interrupted)

A flaw was found in gnome-remote-desktop as shipped in Red Hat Enterprise Linux. In the VNC TLS I/O handlers, retryable GnuTLS results (GNUTLS_E_AGAIN and GNUTLS_E_INTERRUPTED) are handled with an unbounded busy loop instead of yielding to the event loop. A remote attacker who can reach an enabled VNC TLS listener can cause the event-loop thread to spin at high CPU with no forward progress, resulting in denial of service.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed
Vendors
CVE-2026-54886

SSH SFTP server denial of service via extended channel data infinite loop

Loop with Unreachable Exit Condition ('Infinite Loop') vulnerability in Erlang OTP ssh (ssh_sftpd module) allows an authenticated SFTP user to render an SFTP channel permanently unresponsive. The handle_data/4 function in ssh_sftpd contains a catch-all clause that accepts channel data of any type. When channel data with a non-zero type code (SSH_MSG_CHANNEL_EXTENDED_DATA) arrives with an empty pending buffer and a payload at or below the SFTP packet size limit, the clause tail-calls itself with identical arguments, creating an infinite loop. The SFTP protocol operates exclusively on normal channel data (type 0). Extended data (non-zero type) is meaningless for SFTP and is never sent by conforming clients. However, the SSH protocol permits any channel participant to send extended data on an open channel, so an authenticated SFTP client can trigger the loop by sending SSH_MSG_CHANNEL_EXTENDED_DATA with any data_type_code and any non-empty payload at or below the size limit. The targeted ssh_sftpd process enters an infinite tail-recursive loop. It never processes another message, its message queue grows without bound, and it can only be stopped by killing the process. BEAM's reduction-based scheduler preemption continues to function, so other processes on the node are not starved, but each stuck channel process consumes its full CPU time share continuously and accumulates unbounded message queue memory. Opening many channels amplifies the CPU and memory impact. Erlang/OTP SSH configurations using the default max_channels setting (infinity) allow an authenticated user to open unlimited channels per connection, amplifying the attack without requiring multiple TCP connections or authentications. No file contents, credentials, or write access are obtainable through this issue. The impact is limited to denial of service on targeted SFTP channels, with secondary CPU degradation and memory growth. This vulnerability is associated with program file lib/ssh/src/ssh_sftpd.erl and program routine ssh_sftpd:handle_data/4. This issue affects OTP from OTP 17.0 before OTP 27.3.4.14, OTP 28.5.0.3, and OTP 29.0.3, corresponding to ssh from 3.0.1 before 5.2.11.9, 5.5.2.2, and 6.0.2. Whether OTP before OTP 17.0, corresponding to ssh before 3.0.1, is affected is unknown.

CVSS 4.0 · 5.3 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-50324

Windows Active Directory Federation Services Denial of Service Vulnerability

Loop with unreachable exit condition ('infinite loop') in Active Directory Federation Services (AD FS) allows an unauthorized attacker to deny service over a network.

CVSS 3.1 · 5.9 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-50647

Active Directory Federation Server Denial of Service Vulnerability

Loop with unreachable exit condition ('infinite loop') in Active Directory Federation Services (AD FS) allows an unauthorized attacker to deny service over a network.

CVSS 3.1 · 7.5 High EPSS 1.2% KEV · Not listed
Vendors
Products
CVE-2026-20154

Cisco Secure Firewall Adaptive Security Appliance Software and Secure Firewall Threat Defense Software Logging Denial of Service

A vulnerability in the system rate-limiting process for syslog message 419002 of Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Cisco Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause high CPU utilization on an affected device, resulting in a denial of service (DoS) condition. This vulnerability is due to improper rate limiting for syslog message 419002. An attacker could exploit this vulnerability by sending a flood of TCP synchronization (SYN) packets to an affected device. A successful exploit could allow the attacker to cause high CPU utilization, resulting in performance degradation.&nbsp;

CVE-2026-109794

Denial of Service vulnerability in SAP NetWeaver Application Server ABAP, ABAP Platform and SAP Web Dispatcher

SAP NetWeaver Application Server ABAP, ABAP Platform, and SAP Web Dispatcher do not sufficiently handle resource consumption when processing certain requests. An unauthenticated attacker could send specially crafted requests to the affected component, causing excessive resource utilization and service disruption. This results in a high impact on availability. There is no impact on confidentiality and integrity.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed
Vendors
—
Products
—
CVE-2026-125073

FFmpeg through 9.0.2 Infinite Loop Denial of Service via IMC/IAC Decoder

FFmpeg through 9.0.2 contains an infinite loop vulnerability in bit_allocation() in libavcodec/imc.c that allows attackers to hang decoding by supplying audio blocks with a negative bit budget. Attackers can craft IMC or IAC audio files that drive freebits negative, causing the reduction loop to never terminate and consuming 100% CPU.

CVSS 4.0 · 6.8 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-123964

OpenBMB Internet of Agents Collaboration Layer communication_layer.py launch_goal infinite loop

A vulnerability was detected in OpenBMB Internet of Agents up to 9d78e88e47160eb42ee1ee8538c05e1c2c47877a. This affects the function launch_goal of the file im_client/communication/communication_layer.py of the component Collaboration Layer. Performing a manipulation of the argument max_turns results in infinite loop. The attack may be initiated remotely. The exploit is now public and may be used. This product uses a rolling release model to deliver continuous updates. As a result, specific version information for affected or updated releases is not available. The project was informed of the problem early through an issue report but has not responded yet.

CVSS 4.0 · 5.3 Medium EPSS < 1% KEV · Not listed
Vendors
CVE-2026-118781

Forge: Denial of Service via infinite loop in BigInteger.modInverse() with negative input (incomplete fix of CVE-2026-33891)

Forge (also called node-forge) is a native implementation of Transport Layer Security in JavaScript. Prior to 1.4.1, the affected implementation used BigInteger.prototype.modInverse(), bnModInverse(), lib/jsbn.js, RSA public exponent e to process the relevant input or security decision. node-forge's bundled jsbn implementation entered an infinite loop when BigInteger.prototype.modInverse() received a negative value or modulus. An attacker who could control the RSA public exponent passed to key generation, or a direct modInverse() operand, could block the Node.js event loop at full CPU. Parsed DER, PEM, JWK, PKCS#12, X.509, and TLS values are unsigned and cannot trigger this issue. This issue is fixed in version 1.4.1.

CVSS 3.1 · 2.9 Low EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-32777

libexpat: libexpat: Denial of Service via infinite loop in DTD content parsing

libexpat before 2.7.5 allows an infinite loop while parsing DTD content.

CVSS 3.1 · 4 Medium EPSS < 1% KEV · Not listed
Products
CVE-2026-15308

Incremental HTMLParser feed() allows CPU-exhaustion DoS via repeated unterminated markup declarations

The incremental HTML parser (html.parser.HTMLParser) allows for CPU denial-of-service through repeated unterminated markup declarations when processing uncontrolled data.

CVSS 4.0 · 8.7 High EPSS < 1% KEV · Not listed
Vendors
Products