Search vulnerabilities

Results 1,920

Export CSV
CVE-2026-74351

ocfs2: rebase copied fsdlm LVB pointers in locking_state

In the Linux kernel, the following vulnerability has been resolved: ocfs2: rebase copied fsdlm LVB pointers in locking_state The locking_state debugfs iterator snapshots struct ocfs2_lock_res by value under ocfs2_dlm_tracking_lock and later formats that copy in ocfs2_dlm_seq_show(). That is fine for the inline fields, but the userspace fsdlm stack stores the LVB through lksb_fsdlm.sb_lvbptr. Once the iterator drops the tracking lock, a copied non-NULL sb_lvbptr still points into the original lockres owner, so teardown can free that container before the debugfs dump walks the raw LVB bytes. Rebase the copied sb_lvbptr to the copied l_lksb before dumping the raw LVB. The seq snapshot already carries the inline LVB storage reserved in struct ocfs2_dlm_lksb, so the debugfs reader can dump the copied bytes without borrowing the original lockres lifetime. The buggy scenario involves two paths, with each column showing the order within that path: locking_state reader: lockres teardown: 1. ocfs2_dlm_seq_start()/next() 1. file release or another owner copies struct ocfs2_lock_res teardown reaches 2. ocfs2_dlm_seq_show() formats ocfs2_lock_res_free() the copied row 2. the lockres is removed from the 3. ocfs2_dlm_lvb() follows the tracking list copied sb_lvbptr 3. the owner frees the original lockres container Validation reproduced this kernel report: KASAN slab-use-after-free in ocfs2_dlm_seq_show+0x1bd/0x430 RIP: 0033:0x7f8ec4b1e29d The buggy address belongs to the object at ffff88810a1e0800 which belongs to the cache kmalloc-1k of size 1024 The buggy address is located 368 bytes inside of freed 1024-byte region [ffff88810a1e0800, ffff88810a1e0c00) Read of size 1 Call trace: dump_stack_lvl+0x66/0xa0 print_report+0xce/0x630 ocfs2_dlm_seq_show+0x1bd/0x430 (fs/ocfs2/dlmglue.c:3137) srso_alias_return_thunk+0x5/0xfbef5 __virt_addr_valid+0x19f/0x330 kasan_report+0xe0/0x110 seq_read_iter+0x29d/0x790 seq_read+0x20a/0x280 find_held_lock+0x2b/0x80 rcu_read_unlock+0x18/0x70 full_proxy_read+0x9e/0xd0 vfs_read+0x12c/0x590 ksys_read+0xd2/0x170 do_user_addr_fault+0x65a/0x890 do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87) entry_SYSCALL_64_after_hwframe+0x77/0x7f Allocated by task stack: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 __kasan_kmalloc+0xaa/0xb0 ocfs2_file_open+0x13e/0x300 do_dentry_open+0x233/0x7f0 vfs_open+0x5a/0x1b0 path_openat+0x66d/0x1540 do_file_open+0x186/0x2b0 do_sys_openat2+0xce/0x150 __x64_sys_openat+0xd0/0x140 do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87) entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task stack: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x5f/0x80 kfree+0x313/0x590 ocfs2_file_release+0x138/0x260 __fput+0x1df/0x4b0 fput_close_sync+0xd2/0x170 __x64_sys_close+0x55/0x90 do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87) entry_SYSCALL_64_after_hwframe+0x77/0x7f

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-74348

ocfs2/dlm: require a ref for locking_state debugfs open

In the Linux kernel, the following vulnerability has been resolved: ocfs2/dlm: require a ref for locking_state debugfs open debug_lockres_open() copies inode->i_private into struct debug_lockres and debug_lockres_release() later drops that pointer with dlm_put(). That only works if open successfully pins the struct dlm_ctxt. Today open calls dlm_grab(dlm) but ignores its return value. Once the last domain unregister has removed the context from dlm_domains, dlm_grab() returns NULL, yet open still stores the raw pointer and returns success. The later release path is outside the debugfs removal barrier, so it can call dlm_put() after dlm_free_ctxt_mem() has freed the context. KASAN reports this as a slab-use-after-free in dlm_put() called from debug_lockres_release(). Fail the open when dlm_grab() cannot acquire the reference and unwind the seq_file private state before returning. That keeps locking_state from handing out a file descriptor whose release path does not own the dlm_ctxt. The buggy scenario involves two paths, with each column showing the order within that path: locking_state debugfs open: last domain unregister: 1. debug_lockres_open() reads 1. dlm_unregister_domain() calls inode->i_private. dlm_complete_dlm_shutdown(). 2. debug_lockres_open() calls 2. shutdown removes the dlm_ctxt from dlm_grab(dlm) and gets NULL. dlm_domains. 3. open still stores the raw dlm 3. final teardown reaches pointer in dl->dl_ctxt and dlm_free_ctxt_mem() and frees it. returns success. 4. debug_lockres_release() later calls dlm_put(dl->dl_ctxt). Validation reproduced this kernel report: KASAN slab-use-after-free in dlm_put+0x82/0x200 RIP: 0033:0x7f4d349bc9e0 The buggy address belongs to the object at ffff888103a3c000 which belongs to the cache kmalloc-2k of size 2048 The buggy address is located 816 bytes inside of freed 2048-byte region [ffff888103a3c000, ffff888103a3c800) Write of size 4 Call trace: dump_stack_lvl+0x66/0xa0 (?:?) print_report+0xd0/0x630 (?:?) dlm_put+0x82/0x200 (?:?) srso_alias_return_thunk+0x5/0xfbef5 (?:?) __virt_addr_valid+0x188/0x2f0 (?:?) kasan_report+0xe4/0x120 (?:?) kasan_check_range+0x105/0x1b0 (?:?) debug_lockres_release+0x53/0x80 (fs/ocfs2/dlm/dlmdebug.c:587) dlm_put+0x9/0x200 (?:?) debug_lockres_release+0x5c/0x80 (fs/ocfs2/dlm/dlmdebug.c:587) full_proxy_release+0x67/0x90 (?:?) __fput+0x1df/0x4b0 (?:?) do_raw_spin_lock+0x10f/0x1b0 (?:?) fput_close_sync+0xd2/0x170 (?:?) __x64_sys_close+0x55/0x90 (?:?) do_syscall_64+0x10c/0x640 (arch/x86/entry/syscall_64.c:87) irqentry_exit+0xac/0x6e0 (?:?) entry_SYSCALL_64_after_hwframe+0x77/0x7f (?:?) Freed by task stack: kasan_save_stack+0x33/0x60 (?:?) kasan_save_track+0x14/0x30 (?:?) kasan_save_free_info+0x3b/0x60 (?:?) __kasan_slab_free+0x5f/0x80 (?:?) kfree+0x30f/0x580 (?:?) dlm_put+0x1ce/0x200 (?:?) dlm_unregister_domain+0xf6/0xb30 (?:?) o2cb_cluster_disconnect+0x6b/0x90 (?:?) ocfs2_cluster_disconnect+0x41/0x70 (?:?) ocfs2_dlm_shutdown+0x1c4/0x220 (?:?) ocfs2_dismount_volume+0x38a/0x550 (?:?) generic_shutdown_super+0xc3/0x220 (?:?) kill_block_super+0x29/0x60 (?:?) deactivate_locked_super+0x66/0xe0 (?:?) cleanup_mnt+0x13d/0x210 (?:?) task_work_run+0xfa/0x170 (?:?) exit_to_user_mode_loop+0xd6/0x430 (?:?) do_syscall_64+0x3cb/0x640 (arch/x86/entry/syscall_64.c:87) entry_SYSCALL_64_after_hwframe+0x77/0x7f (?:?)

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-74329

watchdog: unregister PM notifier on watchdog unregister

In the Linux kernel, the following vulnerability has been resolved: watchdog: unregister PM notifier on watchdog unregister watchdog_register_device() registers wdd->pm_nb when WDOG_NO_PING_ON_SUSPEND is set, but watchdog_unregister_device() does not remove it. This leaves an embedded notifier block on the PM notifier chain after the watchdog device has been unregistered. A later suspend/resume notification can then call watchdog_pm_notifier() with a stale watchdog_device pointer, or at minimum after wdd->wd_data has been cleared by watchdog_dev_unregister(). Unregister the PM notifier before tearing down the watchdog device.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-72073

mmc: vub300: fix use-after-free on probe failure

In the Linux kernel, the following vulnerability has been resolved: mmc: vub300: fix use-after-free on probe failure The vub300 driver lifetime-manages its controller state using vub300->kref, with vub300_delete() freeing the mmc host when the last reference is dropped. The probe error path after the inactivity timer has been armed still bypasses that lifetime rule, however, and falls through to mmc_free_host() directly if mmc_add_host() fails. The race window is between arming the inactivity timer and reaching the probe error unwind after mmc_add_host() fails: probe thread timer/workqueue ------------ --------------- kref_init(&vub300->kref) ref = 1 kref_get(&vub300->kref) ref = 2, timer ref add_timer(inactivity_timer) fires after one second | | race window |<----------------------------------------------------> | mmc_add_host(mmc) inactivity timer fires vub300_queue_dead_work() kref_get() ref = 3 queue_work(deadwork) mmc_add_host() fails timer_delete_sync() mmc_free_host(mmc) frees vub300 deadwork runs use-after-free The inactivity timeout is one second, so this would require mmc_add_host() to both fail and take more than one second to do so. This is unlikely to happen in practice, but the error path is still wrong. timer_delete_sync() only waits for the timer callback itself. It does not flush deadwork that the callback may already have queued. As a result, queued deadwork can still hold a kref while the probe error path directly frees the backing mmc host, including the vub300 storage. Fix this by using the same lifetime mechanism as disconnect. Clear vub300->interface so that the timer callback and any queued deadwork return early and drop their references, then drop the initial probe reference and return without falling through to err_free_host.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-72070

wifi: libertas_tf: fix use-after-free in lbtf_free_adapter()

In the Linux kernel, the following vulnerability has been resolved: wifi: libertas_tf: fix use-after-free in lbtf_free_adapter() lbtf_free_adapter() calls timer_delete(&priv->command_timer), which does not wait for a running command_timer_fn() callback. lbtf_free_adapter() runs on the teardown path right before ieee80211_free_hw() frees priv, both in lbtf_remove_card() and in the probe error path. command_timer is armed by mod_timer() in lbtf_cmd() whenever a firmware command is sent. command_timer_fn() dereferences priv. If a command times out as the device is removed, command_timer_fn() runs concurrently with teardown and dereferences priv after it has been freed. This is the same use-after-free that commit 03cc8f90d053 ("wifi: libertas: fix use-after-free in lbs_free_adapter()") fixed in the sibling libertas driver. The libertas_tf variant has the identical pattern and was left unchanged. Use timer_delete_sync() so any in-flight callback completes before priv is freed.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-68428

KVM: x86/mmu: Fix use-after-free on vendor module reload

In the Linux kernel, the following vulnerability has been resolved: KVM: x86/mmu: Fix use-after-free on vendor module reload mmu_destroy_caches() destroys pte_list_desc_cache and mmu_page_header_cache, but leaves both pointers unchanged. The pointers live in kvm.ko, and therefore survive when a vendor module is unloaded while kvm.ko remains loaded. If creation of pte_list_desc_cache fails during a subsequent vendor module load, its assignment sets pte_list_desc_cache to NULL and the error path calls mmu_destroy_caches(). mmu_page_header_cache still points to the cache destroyed during the preceding vendor module unload. Passing that stale pointer to kmem_cache_destroy() causes a slab use-after-free. Reproduce the issue on a v7.1.3 kernel with CONFIG_KASAN=y, CONFIG_KASAN_GENERIC=y, CONFIG_KVM=m, and CONFIG_KVM_INTEL=m. A one-shot test hook forces pte_list_desc_cache to NULL on the second invocation of kvm_mmu_vendor_module_init(): 1. Load kvm.ko and kvm-intel.ko, creating both caches. 2. Unload only kvm_intel, leaving kvm.ko loaded. 3. Reload kvm_intel and force initialization through the -ENOMEM path. KASAN reports: BUG: KASAN: slab-use-after-free in kvm_mmu_vendor_module_init+0x5b/0x170 [kvm] ... kmem_cache_destroy+0x21/0x1d0 kvm_mmu_vendor_module_init+0x5b/0x170 [kvm] ... Allocated by task 16817: __kmem_cache_create_args+0x12c/0x3b0 __kmem_cache_create.constprop.0+0xb6/0xf0 [kvm] kvm_mmu_vendor_module_init+0x13b/0x170 [kvm] ... Freed by task 16820: kmem_cache_destroy+0x117/0x1d0 kvm_mmu_vendor_module_exit+0x21/0x30 [kvm] Clear both pointers immediately after destroying their caches so that the stored state reflects the caches' lifetime and repeated cleanup is safe. With the fix applied, the same injected vendor module reload fails with -ENOMEM as expected and produces no KASAN report.

CVSS 3.1 · 4.1 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-68363

wifi: ath9k: hif_usb: don't dereference hif_dev after re-arming firmware request

In the Linux kernel, the following vulnerability has been resolved: wifi: ath9k: hif_usb: don't dereference hif_dev after re-arming firmware request ath9k_hif_request_firmware() re-arms an asynchronous firmware load via request_firmware_nowait(), passing hif_dev as the completion context, and then still dereferences hif_dev: dev_info(&hif_dev->udev->dev, "ath9k_htc: Firmware %s requested\n", hif_dev->fw_name); The re-armed callback ath9k_hif_usb_firmware_cb() runs on the "events" workqueue and, when the firmware is missing, walks the retry chain into ath9k_hif_usb_firmware_fail() -> complete_all(&hif_dev->fw_done). That releases the wait_for_completion(&hif_dev->fw_done) in a concurrent ath9k_hif_usb_disconnect(), which then kfree()s hif_dev. The trailing dev_info() in the frame that re-armed the request can therefore read freed memory (hif_dev->udev, the first field of struct hif_device_usb): BUG: KASAN: slab-use-after-free in ath9k_hif_request_firmware Read of size 8 ... by task kworker/... ath9k_hif_request_firmware ath9k_hif_usb_firmware_cb drivers/net/wireless/ath/ath9k/hif_usb.c:1247 request_firmware_work_func Allocated by ...: ath9k_hif_usb_probe drivers/net/wireless/ath/ath9k/hif_usb.c Freed by ...: ath9k_hif_usb_disconnect -> kfree drivers/net/wireless/ath/ath9k/hif_usb.c The fw_done barrier only makes disconnect wait for the firmware chain to *terminate*; it does not protect the outer ath9k_hif_request_firmware() frame that re-armed the request and keeps touching hif_dev afterwards. Drop the post-request dev_info(): it is the only use of hif_dev after the async request is armed, and it is purely informational (the dev_err() on the failure path runs only when request_firmware_nowait() did not arm a callback, so hif_dev is still alive there). This was first reported by syzbot as a single, non-reproduced crash that was later auto-obsoleted, and was independently rediscovered by the reFuzz fuzzer, which produced a C reproducer (USB-gadget connect/disconnect of an ath9k_htc device whose firmware download fails). The vulnerable code is unchanged and still present in v7.1-rc6, where the slab-use-after-free reproduces under KASAN once the (sub-microsecond) race window is widened.

CVSS 3.1 · 4.4 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-64579

xfrm: policy: preallocate inexact bins before xfrm_hash_rebuild reinsert

In the Linux kernel, the following vulnerability has been resolved: xfrm: policy: preallocate inexact bins before xfrm_hash_rebuild reinsert xfrm_hash_rebuild()'s first loop preallocates the bins/chains the reinsert loop needs, so the reinsert (after hlist_del_rcu()) cannot allocate or fail. But its guard is inverted: it skips policies with prefixlen < threshold and preallocates for the rest. prefixlen < threshold is exactly when policy_hash_bysel() returns NULL and the reinsert takes the allocating xfrm_policy_inexact_insert() path. So the loop preallocates for the exact policies (which never allocate) and skips the inexact ones, whose bin/node is then allocated GFP_ATOMIC during reinsert. On failure the error path only WARN_ONCE()s and continues, leaving a poisoned bydst node; the next rebuild's hlist_del_rcu() dereferences LIST_POISON2 and takes a GPF. Reachable under memory pressure, deterministic via failslab. Invert the guard so preallocation covers exactly the reinserted policies; the reinsert then allocates nothing and cannot fail. Crash: Oops: general protection fault, probably for non-canonical address 0xfbd59c0000000024: 0000 [#1] SMP KASAN NOPTI KASAN: maybe wild-memory-access in range [0xdead...] ... Workqueue: events xfrm_hash_rebuild RIP: 0010:xfrm_hash_rebuild+0x5b3/0x1190 RAX: dead000000000122 (LIST_POISON2 + offset) ... Call Trace: hlist_del_rcu (include/linux/rculist.h:599) xfrm_hash_rebuild (net/xfrm/xfrm_policy.c:1365) process_one_work (kernel/workqueue.c:3322) worker_thread (kernel/workqueue.c:3486) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) ... Kernel panic - not syncing: Fatal exception in interrupt

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-64572

ipv4: fib: free fib_alias with kfree_rcu() on insert error path

In the Linux kernel, the following vulnerability has been resolved: ipv4: fib: free fib_alias with kfree_rcu() on insert error path fib_table_insert() publishes new_fa into the leaf's fa_list with fib_insert_alias() before calling the fib entry notifiers. When a notifier fails, the error path removes new_fa with fib_remove_alias() (hlist_del_rcu) and frees it right away with kmem_cache_free(). fib_table_lookup() walks that list under rcu_read_lock() only, so a concurrent lookup that already reached new_fa keeps reading it after the free: BUG: KASAN: slab-use-after-free in fib_table_lookup (net/ipv4/fib_trie.c:1601) Read of size 1 at addr ffff88810676d4eb by task exploit/297 Call Trace: fib_table_lookup (net/ipv4/fib_trie.c:1601) ip_route_output_key_hash_rcu (net/ipv4/route.c:2814) ip_route_output_key_hash (net/ipv4/route.c:2705) __ip4_datagram_connect (net/ipv4/datagram.c:49) udp_connect (net/ipv4/udp.c:2144) __sys_connect (net/socket.c:2167) __x64_sys_connect (net/socket.c:2173) do_syscall_64 entry_SYSCALL_64_after_hwframe which belongs to the cache ip_fib_alias of size 56 Triggering the error path needs CAP_NET_ADMIN and a registered fib notifier that can reject a route; a netdevsim device whose IPv4 FIB resource is exhausted is enough. Free new_fa with alias_free_mem_rcu(), as fib_table_delete() already does for a fib_alias removed from the trie.

CVSS 3.1 · 7.0 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-64424

netpoll: fix a use-after-free on shutdown path

In the Linux kernel, the following vulnerability has been resolved: netpoll: fix a use-after-free on shutdown path There is a use-after-free error on netpoll, which is clearly detected by KASAN. BUG: KASAN: slab-use-after-free in _raw_spin_lock_irqsave+0x3b/0x80 Read of size 1 at addr ... by task kworker/9:1 Workqueue: events queue_process Call Trace: skb_dequeue+0x1e/0xb0 queue_process+0x2c/0x600 process_scheduled_works+0x4b6/0x850 worker_thread+0x414/0x5a0 Allocated by task 242: __netpoll_setup+0x201/0x4a0 netpoll_setup+0x249/0x550 enabled_store+0x32f/0x380 Freed by task 0: kfree+0x1b7/0x540 rcu_core+0x3f8/0x7a0 The problem happens when there is a pending TX worker running in parallel with the cleanup path. This is what happens on netpoll shutdown path: 1) __netpoll_cleanup() is called 2) set dev->npinfo to NULL 3) call_rcu() with rcu_cleanup_netpoll_info() 3.1) rcu_cleanup_netpoll_info() tries to cancel all workers with cancel_delayed_work(), but doesn't wait for the worker to finish 4) and kfree(npinfo); Because 3.1) doesn't really cancel the work, as the comment says "we can't call cancel_delayed_work_sync here, as we are in softirq", the TX worker can run after 4). Tl;DR: queue_process() is not an RCU reader, it reaches npinfo through the work item via container_of(). Use disable_delayed_work_sync() to ensure the worker is completely stopped and prevent any future re-arming attempts. Once npinfo is set to NULL, senders will bail out and not queue new work. The disable flag ensures any in-flight re-arming attempts also fail silently. In the future, we can do the cleanup inline here without needing the npinfo->rcu rcu_head, but that is net-next material.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-64365

HID: letsketch: fix UAF on inrange_timer at driver unbind

In the Linux kernel, the following vulnerability has been resolved: HID: letsketch: fix UAF on inrange_timer at driver unbind letsketch_driver does not provide a .remove callback, but letsketch_probe() arms a per-device timer: timer_setup(&data->inrange_timer, letsketch_inrange_timeout, 0); The timer is re-armed from letsketch_raw_event() with a 100 ms timeout on every pen-in-range report, and its callback dereferences data->input_tablet to deliver a synthetic BTN_TOOL_PEN release. letsketch_data is allocated with devm_kzalloc(), and its input_dev fields are devm-allocated via letsketch_setup_input_tablet(). On device unbind (USB unplug or rmmod), the HID core runs its default teardown and devm cleanup frees both letsketch_data and the input devices. Because no .remove callback exists, nothing drains the timer first: if raw_event armed it within ~100 ms of the unbind, the pending timer fires on freed memory. This is a UAF read of data and of data->input_tablet, followed by input_report_key() / input_sync() into the freed input_dev. The same problem can occur on the probe error path: if hid_hw_start() enabled I/O on an always-poll-quirk device and then failed, raw_event may have armed the timer before devm releases data. Fix by adding a .remove callback that calls hid_hw_stop() first. hid_hw_stop() synchronously kills the URBs that deliver raw_event(), so once it returns no path can re-arm the timer. timer_shutdown_sync() then drains any in-flight callback and permanently disables further mod_timer() calls. Apply the same timer_shutdown_sync() in the probe error path so the timer is guaranteed not to outlive data.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-64362

HID: lg-g15: cancel pending work on remove to fix a use-after-free

In the Linux kernel, the following vulnerability has been resolved: HID: lg-g15: cancel pending work on remove to fix a use-after-free lg_g15_data is allocated with devm and holds a work item. The report handlers schedule that work straight from device input. lg_g15_event() and lg_g15_v2_event() do it on the backlight cycle key, and lg_g510_leds_event() does it too. The worker dereferences the lg_g15_data back through container_of. The driver had no remove callback and never cancelled the work. So if a report scheduled the work and the keyboard was then unplugged, devres freed lg_g15_data while the work was still pending or running, and the worker touched freed memory. This is a use-after-free. It is reachable as a race on device unplug. Add a remove callback that cancels the work before devres frees the state. g15->work is only initialized for the models that schedule it (G15, G15 v2, G510). The G13 and Z-10 leave it zeroed, so guard the cancel on g15->work.func to avoid cancelling a work that was never set up. The g15 NULL test mirrors the one already in lg_g15_raw_event().

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-64343

USB: ldusb: fix use-after-free on disconnect race

In the Linux kernel, the following vulnerability has been resolved: USB: ldusb: fix use-after-free on disconnect race mutex_unlock() may access the mutex structure after releasing the lock and therefore cannot be used to manage lifetime of objects directly (unlike spinlocks and refcounts). [1][2] Use a kref to release the driver data to avoid use-after-free in mutex_unlock() when release() races with disconnect(). [1] a51749ab34d9 ("locking/mutex: Document that mutex_unlock() is non-atomic") [2] 2b9d9e0a9ba0 ("locking/mutex: Clarify that mutex_unlock(), and most other sleeping locks, can still use the lock object after it's unlocked")

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-64342

USB: iowarrior: fix use-after-free on disconnect

In the Linux kernel, the following vulnerability has been resolved: USB: iowarrior: fix use-after-free on disconnect Submitted write URBs are not stopped on close() and therefore need to be stopped unconditionally on disconnect() to avoid use-after-free in the completion handler.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-64341

USB: iowarrior: fix use-after-free on disconnect race

In the Linux kernel, the following vulnerability has been resolved: USB: iowarrior: fix use-after-free on disconnect race mutex_unlock() may access the mutex structure after releasing the lock and therefore cannot be used to manage lifetime of objects directly (unlike spinlocks and refcounts). [1][2] Use a kref to release the driver data to avoid use-after-free in mutex_unlock() when release() races with disconnect(). [1] a51749ab34d9 ("locking/mutex: Document that mutex_unlock() is non-atomic") [2] 2b9d9e0a9ba0 ("locking/mutex: Clarify that mutex_unlock(), and most other sleeping locks, can still use the lock object after it's unlocked")

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-64245

fbdev: modedb: fix a possible UAF in fb_find_mode()

In the Linux kernel, the following vulnerability has been resolved: fbdev: modedb: fix a possible UAF in fb_find_mode() If mode_option is NULL, it is assigned from mode_option_buf: if (!mode_option) { fb_get_options(NULL, &mode_option_buf); mode_option = mode_option_buf; } Later, name is assigned from mode_option: const char *name = mode_option; However, mode_option_buf is freed before name is no longer used: kfree(mode_option_buf); while name is still accessed by: if ((name_matches(db[i], name, namelen) || Since name aliases mode_option_buf, this may result in a use-after-free. Fix this by extending the lifetime of mode_option_buf until the end of the function by using scope-based resource management for cleanup.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-64170

spi: qup: fix error pointer deref after DMA setup failure

In the Linux kernel, the following vulnerability has been resolved: spi: qup: fix error pointer deref after DMA setup failure The driver falls back to PIO mode if DMA setup fails during probe. Make sure to the clear the DMA channel pointers on setup failure to avoid dereferencing an error pointer (or attempting to release a channel a second time) on later probe errors or driver unbind. This issue was flagged by Sashiko when reviewing a devres allocation conversion patch.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-64103

scsi: isci: Fix use-after-free in device removal path

In the Linux kernel, the following vulnerability has been resolved: scsi: isci: Fix use-after-free in device removal path The ISCI completion tasklet is initialized in isci_host_alloc() (drivers/scsi/isci/init.c:496) and scheduled from both MSI-X and legacy interrupt handlers (drivers/scsi/isci/host.c:223,613). isci_host_deinit() stops the controller and waits for stop completion, but it never kills completion_tasklet before teardown continues. A top-of-function tasklet_kill() is not sufficient here: interrupts are only disabled when isci_host_stop_complete() runs, so until wait_for_stop() returns the IRQ handlers can still requeue the tasklet. The tasklet callback also re-enables interrupts after draining completions, so killing the tasklet before the source is quiesced leaves the same race open. Once wait_for_stop() returns, no further IRQ-driven scheduling can occur. Kill completion_tasklet there so teardown cannot race a queued tasklet running on a dead ihost. On remove or unload, the stale callback can otherwise dereference ihost and touch ihost->smu_registers after the host lifetime ends. A UML + KASAN analogue reproduced the failure class both with no tasklet_kill() and with tasklet_kill() placed before source quiesce, and stayed clean once the kill happened after quiescing the scheduling source. This mirrors commit f6ab594672d4 ("scsi: aic94xx: fix use-after-free in device removal path"), but ISCI needs the kill after wait_for_stop().

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-63804

gfs2: fix use-after-free in gfs2_qd_dealloc

In the Linux kernel, the following vulnerability has been resolved: gfs2: fix use-after-free in gfs2_qd_dealloc gfs2_qd_dealloc(), called as an RCU callback from gfs2_qd_dispose(), accesses the superblock object sdp through qd->qd_sbd after freeing qd. It does so to decrement sd_quota_count and wake up sd_kill_wait. However, by the time the RCU callback runs, gfs2_put_super() may have already freed sdp via free_sbd(). This can happen when gfs2_quota_cleanup() is called during unmount: it disposes of quota objects via call_rcu() and then waits on sd_kill_wait with a 60-second timeout. If the timeout expires, or if gfs2_gl_hash_clear() triggers additional qd_put() calls that schedule more RCU callbacks after the wait completes, gfs2_put_super() will proceed to free the superblock while RCU callbacks referencing it are still pending. Add an rcu_barrier() before free_sbd() in gfs2_put_super() to ensure all pending RCU callbacks (including gfs2_qd_dealloc) have completed before the superblock is freed.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-53349

netfilter: nf_conntrack: destroy stale expectfn expectations on unregister

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack: destroy stale expectfn expectations on unregister NAT helpers such as nf_nat_h323 store a raw pointer to module text in exp->expectfn (e.g. ip_nat_q931_expect). nf_ct_helper_expectfn_unregister() only unlinks the callback descriptor and never walks the expectation table, so an expectation pending at module removal survives with a dangling exp->expectfn into freed module text. When the expected connection arrives, init_conntrack() invokes exp->expectfn(), now a stale pointer into the unloaded module. Reproduced on a KASAN build by loading the H.323 helpers, creating a Q.931 expectation, unloading nf_nat_h323, then connecting to the expected port: Oops: int3: 0000 [#1] SMP KASAN NOPTI RIP: 0010:0xffffffffa06102d1 init_conntrack.isra.0 (net/netfilter/nf_conntrack_core.c:1862) nf_conntrack_in (net/netfilter/nf_conntrack_core.c:2049) ipv4_conntrack_local (net/netfilter/nf_conntrack_proto.c:223) nf_hook_slow (net/netfilter/core.c:619) __ip_local_out (net/ipv4/ip_output.c:120) __tcp_transmit_skb (net/ipv4/tcp_output.c:1715) tcp_connect (net/ipv4/tcp_output.c:4374) tcp_v4_connect (net/ipv4/tcp_ipv4.c:345) __sys_connect (net/socket.c:2167) Modules linked in: nf_conntrack_h323 [last unloaded: nf_nat_h323] Reaching the dangling state requires CAP_SYS_MODULE in the initial user namespace to remove a NAT helper that still has live expectations, so this is a robustness fix; leaving an expectation pointing at freed text is wrong regardless. Add nf_ct_helper_expectfn_destroy(), which walks the expectation table and drops every expectation whose ->expectfn matches the descriptor being torn down. Call it from each NAT helper's exit path after the existing RCU grace period, so no expectation outlives the code it points at and no extra synchronize_rcu() is introduced. With the fix, the same reproducer runs to completion without the Oops.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products