Search vulnerabilities

Results 2,634

Export CSV
CVE-2026-116115

Yoosee GM8135S Camera WiFi Configuration wpa_supplicantX.conf initialization

A security vulnerability has been detected in Yoosee GM8135S Camera 21.00.01.36. This impacts an unknown function of the file wpa_supplicantX.conf of the component WiFi Configuration. Such manipulation leads to improper initialization. The attack can only be initiated within the local network. This attack is characterized by high complexity. The exploitability is said to be difficult. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

CVSS 4.0 · 2.3 Low EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-91788

Foxit PDF Editor/Reader Missing Authorization Information Disclosure Vulnerability

When implementing the JavaScript interface, Foxit PDF Editor/Reader did not perform the attribute authorization checks required by the specification. As a result, a trusted malicious PDF could potentially access sensitive content from other documents within the same process and transmit it externally.

CVSS 3.1 · 4.7 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-57144

PraisonAI SandlockSandbox falls back to unrestricted subprocess execution when Landlock is unavailable

PraisonAI is a multi-agent teams system. From version 4.5.110 to before version 4.6.61, praisonai.sandbox.SandlockSandbox is documented and implemented as the kernel-enforced sandbox backend for untrusted code. Its SandboxConfig.native() path lets callers configure allowed filesystem paths and network=False. On systems where the optional sandlock module imports but reports that Landlock is unavailable, SandlockSandbox.execute() and run_command() do not fail closed. They silently fall back to SubprocessSandbox(self.config). That fallback keeps the same high-level native policy object but does not enforce the native filesystem or network boundary during code execution. A sandboxed payload can read files outside the configured allowed path and open network connections despite network=False. This issue has been patched in version 4.6.61.

CVSS 3.1 · 8.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-103394

Session Smart Router: An incomplete operator causes the use of incorrect encryption keys during security policy updates.

An Improper Initialization vulnerability in the SSR software in Juniper Networks Session Smart Router allows an attacker to decrypt traffic or cause a denial of service via security policy assignment.

CVSS 3.1 · 3.7 Low EPSS < 1% KEV · Not listed
Vendors
CVE-2026-57446

libIEC61850: Server-side double free in MMS ObtainFile task reuse due to stale FILE* handle

libIEC61850 is an open-source implementation of IEC 61850 client and server protocols including MMS, GOOSE, Sampled Values, and R-Session. From 1.6.1 until 1.6.2, a successful MMS ObtainFile operation closes MmsObtainFileTask::fileHandle but leaves the stale non-NULL value in a task marked MMS_FILE_UPLOAD_STATE_NOT_USED. If a later ObtainFile request reuses that task and destination creation fails, MMS_FILE_UPLOAD_STATE_SEND_OBTAIN_FILE_ERROR_DESTINATION cleanup closes the stale FILE object again. Servers with the MMS file service and ObtainFile enabled can therefore be crashed remotely by the success-then-failure request sequence. This issue is fixed in version 1.6.2.

CVSS 3.1 · 5.3 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99186

x86/insn-eval: Fix shadowed segment index in get_seg_reg_override_idx()

In the Linux kernel, the following vulnerability has been resolved: x86/insn-eval: Fix shadowed segment index in get_seg_reg_override_idx() Commit 45e1dccc0653 ("x86/insn: Simplify for_each_insn_prefix()") made for_each_insn_prefix() declare its own loop counter named idx. get_seg_reg_override_idx() keeps its result in a local of the same name, so the assignments in the loop body now write the loop counter: - the function always returns INAT_SEG_REG_DEFAULT, so FS and GS overrides are ignored; - a CS override sets the counter to INAT_SEG_REG_CS (2), the increment makes it 3, and prefixes.bytes[3] holds the last prefix, 0x2e again, so the loop never terminates. The UMIP emulation reaches this from the #GP handler for user space: an SGDT, SIDT or SMSW with a memory operand and a CS prefix leaves the task spinning in the kernel, never returning to user space, with a SIGKILL that is never delivered. Any user can thus tie up CPUs until reboot. With an FS or GS prefix, the emulated result is written to the wrong address. Rename the internal macro iterator variable. [ Lukas' original patch renamed the use site, I changed it to rename the iterator in the macro instead, but left Lukas' commit message and authorship - Linus ]

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-114722

roundcubemail: Roundcube Webmail: Interface spoofing via CSS scoping bypass in HTML messages

Roundcube Webmail before 1.6.20 and 1.7.x before 1.7.5 is affected by a CSS scoping bypass in HTML messages. rcube_utils::mod_css_styles() did not treat an at-rule prologue such as @layer a; as a selector boundary, and did not handle selectors beginning with ::, so selectors following an at-rule were left unscoped and applied to the whole Roundcube interface instead of being confined to the message body. This allows an HTML message to restyle application chrome for UI redressing and spoofing. Upstream fixed this in the commit “Fix CSS scoping bypass in HTML messages using at-rules”.

CVSS 3.1 · 6.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-104073

NetBox 2.9.5 < 4.7.0 Session Hijacking via Custom Links

NetBox versions 2.9.5 before 4.7.0 contain a server-side template injection vulnerability that allows a low-privileged user with the "Can add custom links" permission to steal session cookies and API tokens of other users by exposing the raw Django HttpRequest object to the Jinja2 template context. Attackers can craft a custom link template embedding request.COOKIES['sessionid'] or a user's API token into an img src URL, which bypasses the clean_html sanitizer and auto-exfiltrates the victim's credentials to an attacker-controlled host when a privileged user views the object, enabling full account takeover.

CVSS 4.0 · 6.9 Medium EPSS < 1% KEV · Not listed
Products
CVE-2026-111445

Wheels 4.0.0 through 4.1.2 before 4.2.0 replaces incoming scope conditions with a primary-key condition in findByKey() and exists(key=). For exists(key=), production with error information disabled returns true for an out-of-scope key instead of throwing. Applications relying on scopes for ownership or tenant authorization can therefore load and subsequently modify or delete another user's or tenant's record when the key comes from a request. The 4.2.0 fix combines key conditions with incoming scope, query-builder or where conditions in findByKey(), exists(key=), updateByKey() and deleteByKey(). Other scope-aware finders, aggregates, updateAll() and deleteAll() are not affected.

CVSS 3.1 · 8.1 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-109774

Invalid pointer, undefined behavior in the DOM: Notifications component

Invalid pointer, undefined behavior in the DOM: Notifications component. This vulnerability was fixed in Firefox 158 and Thunderbird 158.

CVSS 3.1 · 9.8 Critical EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-63863

drm/gpusvm: Fix unbalanced unlock in drm_gpusvm_scan_mm()

In the Linux kernel, the following vulnerability has been resolved: drm/gpusvm: Fix unbalanced unlock in drm_gpusvm_scan_mm() There is a unbalanced lock/unlock to gpusvm notifier lock: [ 931.045868] ===================================== [ 931.046509] WARNING: bad unlock balance detected! [ 931.047149] 6.19.0-rc6+xe-**************** #9 Tainted: G U [ 931.048150] ------------------------------------- [ 931.048790] kworker/u5:0/51 is trying to release lock (&gpusvm->notifier_lock) at: [ 931.049801] [<ffffffffa090c0d8>] drm_gpusvm_scan_mm+0x188/0x460 [drm_gpusvm_helper] [ 931.050802] but there are no more locks to release! [ 931.051463] The drm_gpusvm_notifier_unlock() sits under err_free label and the first jump to err_free is just before calling the drm_gpusvm_notifier_lock() causing unbalanced unlock.

CVSS 3.1 · 8.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-63865

bpf: Drop task_to_inode and inet_conn_established from lsm sleepable hooks

In the Linux kernel, the following vulnerability has been resolved: bpf: Drop task_to_inode and inet_conn_established from lsm sleepable hooks bpf_lsm_task_to_inode() is called under rcu_read_lock() and bpf_lsm_inet_conn_established() is called from softirq context, so neither hook can be used by sleepable LSM programs.

CVSS 3.1 · 8.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-76300

Security Hardening in Splunk Enterprise - October 2026

As part of Cisco's ongoing commitment to proactive security and product quality, Cisco has conducted a comprehensive internal security review. This review resulted in a software hardening release that addresses multiple internally discovered vulnerabilities. The vulnerabilities tracked by CVE-2026-76300 are related to improper control of a resource through its lifetime and are grouped under the Common Weakness Enumeration (CWE) CWE-664.

CVSS 3.1 · 8.8 High EPSS < 1% KEV · Not listed
Vendors
CVE-2026-98906

net: lan966x: restore RX state on reload failure

In the Linux kernel, the following vulnerability has been resolved: net: lan966x: restore RX state on reload failure lan966x_fdma_reload() backs up rx->page_pool and rx->fdma before reallocating the RX resources for the new MTU. If the allocation fails, the restore path puts these fields back before restarting RX. However, the reload path also updates rx->page_order and rx->max_mtu before calling lan966x_fdma_rx_alloc(). These fields are not restored on failure, so RX can be restarted with the old pages, old FDMA state and old page pool, but with the page geometry from the failed new MTU. This can make the XDP path advertise a frame size derived from the new page_order while the actual RX pages still come from the old allocation. For example, after a failed reload to a jumbo MTU, xdp_init_buff() may be called with a frame size larger than the restored RX pages. lan966x_fdma_rx_alloc_page_pool() also registers the newly allocated page pool with each port's XDP RXQ before fdma_alloc_coherent() is called. If fdma_alloc_coherent() fails, the new page pool is destroyed, but the rollback path does not restore the per-port XDP RXQ mem model registration either. Save and restore rx->page_order and rx->max_mtu, and restore the old page pool registration for each port's XDP RXQ before RX is started again. This keeps the restored RX state consistent after a failed reload.

CVSS 3.1 · 4.1 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-25253

OpenClaw (aka clawdbot or Moltbot) before 2026.1.29 obtains a gatewayUrl value from a query string and automatically makes a WebSocket connection without prompting, sending a token value.

CVSS 3.1 · 8.8 High EPSS 32.4% KEV · Not listed
Vendors
Products
CVE-2026-98975

xfs: stop exchanging reflink flags when exchanging mappings

In the Linux kernel, the following vulnerability has been resolved: xfs: stop exchanging reflink flags when exchanging mappings When an exchange covers both files from offset 0 to i_disk_size, xmi_can_exchange_reflink_flags() assumes every mapping moved and hands the reflink flag over to the other file. That assumption is wrong. A file can still own shared blocks past i_disk_size, e.g. after EXCHANGE_RANGE_TO_EOF sets a smaller size without unmapping anything. The flag is cleared anyway, and the next write to such a block happens in place instead of CoW, corrupting the other file that shares it. Commit a23eca88448e ("xfs: fix exchange-range reflink flag clearing issue with INO1_WRITTEN") fixed one instance of this. Rather than add another special case, stop moving the flags. xfs_exchmaps_ensure_reflink() already sets the flag on both inodes before the exchange, so both just keep it. Nothing sets CLEAR_INO{1,2}_REFLINK anymore. Intents logged by older kernels may still carry them; recovery already masks them off, so they stay in the log format mask and are ignored. XFS_IOC_SWAPEXT has the same problem: it moves the reflink flag from one inode to the other along with the extents. Just removing that is not enough here: the exchange path flags both inodes up front in xfs_exchmaps_ensure_reflink(), but swapext has no such step, so the inode receiving the shared extents would be left without the flag. Set it on both inodes instead, and make sure both have a CoW fork, since an inode with the reflink flag is expected to have one. The flag now stays until FALLOC_FL_UNSHARE_RANGE, xfs_scrub, or a truncate to zero removes it.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-98959

btrfs: fix xattr replace when multiple xattrs are packed in the same item

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix xattr replace when multiple xattrs are packed in the same item If we have a btrfs_dir_item item that packs multiple xattrs and then we replace the value of one of them (with the setxattr(2) family of syscalls) with another value of a different size, we end up not having a fully initialized btrfs_dir_item, resulting in a corruption that the tree checker will detect at extent buffer writeback time. This is because in btrfs_setxattr() when we find a btrfs_dir_item with multiple xattrs (due to the crc32c hash of their name being the same) we delete one of the xattr items (btrfs_dir_item) and then insert a new one, but the deletion and insertion results in shifting existing data in the leaf and therefore when the new value of a xattr has a different size, the new btrfs_dir_item is placed in a leaf section that was not initialized and we only copy the value's data and set the value's length in the new btrfs_dir_item, without setting the name, the name's length, the key (which must be all zeroes for xattrs), flags (BTRFS_FT_XATTR) and transaction ID. The following script reproduces the issue: $ cat test.sh #!/bin/bash DEV=/dev/sdi MNT=/mnt/sdi mkfs.btrfs -f $DEV mount $DEV $MNT touch $MNT/testfile # Add two xattrs that, on btrfs, have the same hash (crc32c) for their # name and therefore are packed into the same btrfs_dir_item. setfattr -n user.foobar -v 123 $MNT/testfile setfattr -n user.WvG1c1Td -v qwerty $MNT/testfile # Verify the xattrs are present. echo "xattrs before:" getfattr --absolute-names --dump $MNT/testfile # Now replace the value of the foobar xattr with a significantly larger # value. setfattr -n user.foobar -v abcdefghijklmnopqrstuvwxyz $MNT/testfile # Check the xattrs have the expected values. echo "xattrs after:" getfattr --absolute-names --dump $MNT/testfile umount $MNT Running it: $ ./test.sh (...) xattrs before: # file: /mnt/sdi/testfile user.WvG1c1Td="qwerty" user.foobar="123" xattrs after: # file: /mnt/sdi/testfile user.WvG1c1Td="qwerty" So the "user.foobar" xattr is missing and there was a transaction abort when unmounting the fs with the following traces in dmesg: $ dmesg [869800.159271] BTRFS warning (device sdi): access to eb bytenr 30474240 len 16384 out of range start 16015 len 25964 [869800.159293] ------------[ cut here ]------------ [869800.159296] WARNING: fs/btrfs/extent_io.c:4408 at report_eb_range+0x44/0x60 [btrfs], CPU#8: getfattr/2605179 [869800.168961] Modules linked in: btrfs dm_thin_pool (...) [869800.190527] CPU: 8 UID: 0 PID: 2605179 Comm: getfattr Tainted: G W 7.3.0-rc3-btrfs-next-244+ #1 PREEMPT(full) [869800.193726] Tainted: [W]=WARN [869800.194502] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014 [869800.197576] RIP: 0010:report_eb_range+0x44/0x60 [btrfs] [869800.198985] Code: 48 8b 7b 18 (...) [869800.203531] RSP: 0018:ffffce4541937d58 EFLAGS: 00010246 [869800.204609] RAX: 0000000000000000 RBX: ffff8dde054b8738 RCX: 0000000000000000 [869800.206137] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffffffffc04c92a0 [869800.207645] RBP: 0000000000003e8f R08: 0000000000000000 R09: 3fffffffffefffff [869800.226175] R10: ffffce4541937a88 R11: 0000000000000003 R12: 000000000000656c [869800.227594] R13: ffff8dde14be800f R14: 000000000000656c R15: 0000000000000069 [869800.229097] FS: 00007f59023bb780(0000) GS:ffff8de5788ed000(0000) knlGS:0000000000000000 [869800.231137] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [869800.232321] CR2: 0000558dc45e6a78 CR3: 0000000765b16004 CR4: 0000000000370ef0 [869800.233783] Call Trace: [869800.234330] <TASK> [869800.234791] read_extent_buffer+0x4d/0x100 [btrfs] [869800.235898] btrfs_listxattr+0x199/0x240 [btrfs] [869800.236912] vfs_listxattr+0x51/0 ---truncated---

CVSS 3.1 · 9.8 Critical EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-98094

staging: fbtft: make dirty_lock IRQ-safe

In the Linux kernel, the following vulnerability has been resolved: staging: fbtft: make dirty_lock IRQ-safe fbtft_mkdirty() can be reached from the fbcon rendering path while processing printk() in hardirq context. Meanwhile, dirty_lock is also taken by fbtft_deferred_io() in workqueue context with local interrupts enabled. Lockdep reports a possible IRQ lock inversion involving dirty_lock and console_owner. A hardirq can interrupt a CPU holding dirty_lock and enter the console rendering path, which can attempt to acquire dirty_lock again. The following lockdep report was observed on an RK3566 system with CONFIG_PROVE_LOCKING enabled: WARNING: possible irq lock inversion dependency detected swapper/2/0 just changed the state of lock: (console_owner){-...}-{0:0} but this lock took another, HARDIRQ-unsafe lock in the past: (&par->dirty_lock){+.+.}-{2:2} CPU0 CPU1 ---- ---- lock(&par->dirty_lock); local_irq_disable(); lock(console_owner); lock(&par->dirty_lock); <Interrupt> lock(console_owner); *** DEADLOCK *** Use spin_lock_irqsave() for fbtft_mkdirty() and spin_lock_irq() for fbtft_deferred_io(). They only access the dirty line range, so the IRQ-off regions remain short.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-98929

macsec: initialize SecY before registering the netdevice

In the Linux kernel, the following vulnerability has been resolved: macsec: initialize SecY before registering the netdevice Creating a MACsec device with MAC offload over an LRO-capable lower device triggers a warning in rtmsg_ifinfo_build_skb() when IPv4 forwarding is enabled by default. register_netdevice() invokes inetdev_init(), which disables LRO and emits a NETDEV_FEAT_CHANGE notification. This reaches macsec_fill_info() before macsec_add_dev() initializes the SecY. key_len is still zero, so macsec_fill_info() returns -EMSGSIZE and trips the WARN_ON in rtmsg_ifinfo_build_skb(), even though the skb has enough space. Even without the warning, notifications during registration can report uninitialized SecY attributes, including the SCI. This ordering has existed since the driver was introduced. Initialize the SecY and apply the new-link attributes before registration. Move MAC address inheritance into macsec_newlink() so the SCI can also be initialized before registration-time notifications report it. Move the per-CPU statistics and metadata destination allocation into ndo_init(), and release partial allocations on failure.

CVSS 3.1 · 3.0 Low EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-98915

media: video-i2c: use vb2_video_unregister_device on driver removal

In the Linux kernel, the following vulnerability has been resolved: media: video-i2c: use vb2_video_unregister_device on driver removal The driver uses vb2_fop_release() as its file release operation, so vb2_video_unregister_device() should be used instead of video_unregister_device() during driver removal. This ensures that the vb2 queue is properly disconnected before the video device is unregistered.

CVSS n/a EPSS < 1% KEV · Not listed
Vendors
Products