Search vulnerabilities

Results 16,557

Export CSV
CVE-2026-85091

zlib 1.2.11 through 1.3.2 Heap Buffer Overflow via Stale gzwrite Pointer After Failed Write

zlib 1.2.11 through 1.3.2 contains a heap buffer overflow: after an underlying write() fails, gz_write() returns without resetting strm.next_in, leaving it pointed at the caller's buffer. A later gz* write call then derives a position from the stale pointer and writes past a heap allocation; any write() failure reaches it, including EPIPE on a blocking descriptor, and in versions before 1.3.1.2 the failed write must be followed by a gzclearerr() call.

CVSS 4.0 · 8.3 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-95520

Rpm: rpm: integer overflow in iterreadarchivenext() leads to heap-based buffer overflow when parsing untrusted rpm packages

A heap-based buffer overflow flaw was found in rpm. Parsing a symlink entry in an untrusted RPM package whose declared RPMTAG_LONGFILESIZES value is 0xFFFFFFFFFFFFFFFF causes an integer overflow in iterReadArchiveNext() that shrinks a buffer allocation to one byte, after which the payload's independently-controlled cpio filesize field is used to write attacker-controlled data past the end of that allocation. This is reachable via rpm2cpio, rpm2archive, and rpm -qlvp on an untrusted package.

CVSS 3.1 · 7.1 High EPSS < 1% KEV · Not listed
Vendors
CVE-2026-125262

FFmpeg through 9.0.2 Heap Buffer Overflow via LCEVC Enhancement Decoding

FFmpeg through 9.0.2 contains a heap buffer overflow vulnerability in libavcodec/lcevcdec.c because LCEVC output picture dimensions are not validated against the allocated frame. Attackers can embed crafted LCEVC enhancement data with differing global configurations in H.264 or HEVC streams to corrupt heap memory in decoding applications.

CVSS 4.0 · 8.5 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-125202

FFmpeg through 9.0.2 Heap Buffer Overflow via HEVC VAAPI Tile Arrays

FFmpeg through 9.0.2 contains a heap buffer overflow vulnerability in vaapi_hevc_start_frame() in libavcodec/vaapi_hevc.c that copies unbounded PPS tile counts into fixed-size arrays. Attackers can supply a crafted HEVC bitstream with a large picture and many tiles to write controlled 16-bit values past heap-allocated hwaccel data, corrupting memory in applications decoding with VAAPI.

CVSS 4.0 · 7.3 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-122056

Openscap: one-byte heap buffer overflow in sds-compose may lead to denial-of-service

A flaw was found in OpenSCAP. A heap-based buffer overflow can occur when processing a specially crafted Extensible Configuration Checklist Description Format (XCCDF) document using the sds-compose option. An attacker could exploit this vulnerability to corrupt memory, resulting in an application crash and a Denial of Service (DoS).

CVSS 3.1 · 5.9 Medium EPSS < 1% KEV · Not listed
CVE-2026-114690

Gcc: confirmed out-of-bounds read/write in libstdc++ parallel `std

A flaw was found in GCC. An out-of-bounds memory access vulnerability exists in the libstdc++ parallel search implementation due to an undersized internal buffer. A local attacker can exploit this flaw by providing crafted search data to an application compiled with parallel mode, causing the process to crash and leading to a Denial of Service (DoS).

CVSS 3.1 · 6.2 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-13732

Gdb: gdb: out-of-bounds write in stabs parser read_member_functions() via crafted elf

A flaw was found in GDB's STABS debug format parser. The read_member_functions() function in gdb/stabsread.c contains a linked list removal bug in the code that separates destructor and non-destructor member functions of C++ classes. The bug causes the destructor entries to remain in the main function list while the list length counter is decremented, resulting in an out-of-bounds write when the function list is copied to its final allocated array. An attacker can craft an ELF binary with malicious .stab and .stabstr sections that triggers this out-of-bounds write when a user opens the file in GDB and performs any symbol-inspection operation such as setting a breakpoint. The inferior process does not need to be executed. Under controlled conditions, this was demonstrated to achieve execution of arbitrary commands within the GDB process.

CVSS 3.1 · 7 High EPSS < 1% KEV · Not listed
Vendors
CVE-2026-82012

Premiere Pro | Out-of-bounds Write (CWE-787)

Premiere Pro is affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-130507

virglrenderer: virglrenderer: guest-triggerable OOB write/read in GBM direct-transfer path

A flaw was found in virglrenderer, the virtual OpenGL renderer used to provide 3D graphics acceleration to virtual machines. On the host-side buffer transfer path for GBM-backed resources, guest-supplied transfer parameters are not properly validated against the dimensions of the allocated buffer. A malicious guest with 3D acceleration enabled could use this flaw to perform an out-of-bounds write in the host renderer process, causing memory corruption, or an out-of-bounds read disclosing host memory to the guest. This could result in a denial of service of the renderer process or, potentially, a virtual machine escape. Only renderer configurations with GBM buffer allocation enabled are affected.

CVSS 3.1 · 8.8 High EPSS n/a KEV · Not listed
Vendors
—
Products
—
CVE-2026-123615

imgproxy before 4.0.17 Out-of-Bounds Write in ICO Loader

imgproxy 3.3.0 before 4.0.17 contains an out-of-bounds heap read and write in the ICO loader's BMP header reconstruction (vips_foreign_load_ico_header in vips/icoload.c) when an ICO entry declares a tiny data size, causing unvalidated header fields to be read and written past the allocated buffer. Unauthenticated remote attackers can supply a crafted ICO image to corrupt adjacent heap chunk metadata, triggering a glibc abort that crashes the worker.

CVSS 4.0 · 8.7 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-115455

Gcc: stack overflow in std::bitset on libstdc++

A flaw was found in GCC libstdc++. When an application extracts data into a bitset from a wide-character stream, internal stack memory allocation fails to properly account for character size and alignment. An attacker capable of supplying crafted input to an affected application could trigger a stack-based buffer overflow leading denial of service (DoS).

CVSS 3.1 · 6.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-73857

ModSecurity v3 XML Request Body Processor Uninitialized Pointer Dereference Vulnerability

ModSecurity is an open source, cross platform web application firewall (WAF) engine for Apache, IIS and Nginx. From 3.0.15 until 3.0.17, XML request body processing with SecParseXmlIntoArgs set to On or OnlyArgs can leave XMLNodes::parsing_ctx_arg uninitialized in the SAX end-element callback. A single crafted unauthenticated HTTP request can make a worker dereference the pointer, resulting in a constant-value write to an attacker-controlled address. The resulting memory corruption can terminate the worker and may disclose memory or redirect execution. Earlier 3.0.x releases and ModSecurity 2.x do not use the affected path. This issue is fixed in version 3.0.17.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-64515

wifi: mac80211: fix MLE defragmentation

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: fix MLE defragmentation If either reconf or EPCS multi-link element (MLE) is contained in a non-transmitted profile, the defragmentation routine is called with a pointer to the defragmented copy, but the original elements. This is incorrect for two reasons: - if the original defragmentation was needed, it will not find the correct data - if the original frame is at a higher address, the parsing will potentially overrun the heap data (though given the layout of the buffers, only into the new defragmentation buffer, and then it has to stop and fail once that's filled with copied data. Fix it by tracking the container along with the pointer and in doing so also unify the two almost identical defragmentation routines.

CVSS 3.1 · 8.3 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-125348

chromium-browser: Out of bounds write in GPU

Out of bounds write in GPU in Google Chrome prior to 157.0.8103.50 allowed a remote attacker to potentially execute arbitrary code outside the sandbox via a crafted HTML page. (Chromium security severity: High)

CVSS 3.1 · 8.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-64460

PCI/IOV: Skip VF Resizable BAR restore on read error

In the Linux kernel, the following vulnerability has been resolved: PCI/IOV: Skip VF Resizable BAR restore on read error sriov_restore_vf_rebar_state() uses the VF Resizable BAR Control register to decide how many VF BARs to restore (nbars) and which VF BAR each iteration addresses (bar_idx). bar_idx indexes into dev->sriov->barsz[], which has only PCI_SRIOV_NUM_BARS (6) entries. When a device does not respond, config reads typically return PCI_ERROR_RESPONSE (~0). Both fields are 3 bits wide, so nbars and bar_idx both evaluate to 7. The barsz[] access then goes out of bounds. UBSAN reports this as: UBSAN: array-index-out-of-bounds in drivers/pci/iov.c:948:51 index 7 is out of range for type 'resource_size_t [6]' Observed on an NVIDIA RTX PRO 1000 GPU (GB207GLM) that stopped responding during a failed GC6 power state exit. The subsequent pci_restore_state() invoked sriov_restore_vf_rebar_state() while config reads returned 0xffffffff, triggering the splat. Bail out if any VF Resizable BAR Control read returns PCI_ERROR_RESPONSE. No further VF BARs are touched, which is safe because a config read that returns PCI_ERROR_RESPONSE indicates the device is unreachable and restoration is pointless. This mirrors the guard in pci_restore_rebar_state().

CVSS 3.1 · 7 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-63984

ipv6: rpl: fix hdrlen overflow in ipv6_rpl_srh_decompress()

In the Linux kernel, the following vulnerability has been resolved: ipv6: rpl: fix hdrlen overflow in ipv6_rpl_srh_decompress() ipv6_rpl_srh_decompress() computes: outhdr->hdrlen = (((n + 1) * sizeof(struct in6_addr)) >> 3); hdrlen is __u8. For n >= 127 the result exceeds 255 and silently truncates. With n=127 (cmpri=15, cmpre=15, pad=0, hdrlen=16): (128 * 16) >> 3 = 256, truncated to 0 as __u8 The caller in ipv6_rpl_srh_rcv() then places the compressed header at buf + ((ohdr->hdrlen + 1) << 3). With hdrlen=0 this is buf + 8, but the decompressed region occupies buf[0..2055] (8-byte header plus 128 full addresses). The compressed header overlaps the decompressed data, and ipv6_rpl_srh_compress() writes into this overlap, corrupting the routing header of the forwarded packet. The existing guard at exthdrs.c:546 checks (n + 1) > 255, which prevents n+1 from overflowing unsigned char (the segments_left field), but does not prevent the computed hdrlen from overflowing __u8. n=127 passes because 128 <= 255, yet hdrlen=256 does not fit. Tighten the bound to (n + 1) > 127. This caps n at 126, giving hdrlen = (127 * 16) >> 3 = 254, which fits in __u8. The compressed header then lands at buf + ((254 + 1) << 3) = buf + 2040, exactly past the decompressed region (buf[0..2039]). No overlap. 127 segments is well beyond any realistic RPL deployment.

CVSS 3.1 · 9.8 Critical EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-98107

Bluetooth: L2CAP: fix out-of-bounds write in l2cap_ecred_connect

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: fix out-of-bounds write in l2cap_ecred_connect l2cap_chan_connect() tries to ensure there are no more than L2CAP_ECRED_CONN_SCID_MAX pending ECRED channels, so they fit in the same L2CAP_ECRED_CONN_REQ that l2cap_ecred_connect() constructs. However, the check only counts deferred channels. If 6 L2CAP sockets are connected at the same time in order DDDDND (D=deferred, N=non-deferred), the last can bump the total to max+1. It results to one __le16 written out of bounds of the scid array, and an invalid ECRED_CONN_REQ being sent. Fix by leaving room for the non-deferred pending ECRED channels in the counting in l2cap_chan_connect(), so the limit can't be exceeded. Move counting under same critical section where the channel is added. Although race conditions involving this appear unreachable, it's easier to see. Also add WARN_ON_ONCE check in l2cap_ecred_defer_connect() to make this less brittle.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-98108

Bluetooth: L2CAP: fix chan mode for LE_CONN_REQ + EXT_FLOWCTL pchan

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: fix chan mode for LE_CONN_REQ + EXT_FLOWCTL pchan l2cap_new_connection() sets default value of channel mode to match the parent channel. l2cap_le_connect_req() left this at the default, and created L2CAP_MODE_EXT_FLOWCTL channels if listening pchan has that mode. This causes FLAG_DEFER_SETUP channels to reply to L2CAP_LE_CONN_REQ with L2CAP_ECRED_CONN_RSP, which is incorrect. It can also result to stack OOB write (of l2cap_alloc_cid determined values) in l2cap_ecred_rsp_defer(), as l2cap_le_connect_req() does not limit maximum number of deferred channels or check for duplicate ident. Fix by setting chan->mode correctly in l2cap_le_connect_req(). Also check channel mode in l2cap_ecred_rsp_defer(), and do WARN_ON_ONCE instead of OOB write to make it less brittle.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-64504

iio: accel: bmc150: clamp the device-reported FIFO frame count

In the Linux kernel, the following vulnerability has been resolved: iio: accel: bmc150: clamp the device-reported FIFO frame count __bmc150_accel_fifo_flush() copies the number of samples the device reports in its hardware FIFO into an on-stack buffer u16 buffer[BMC150_ACCEL_FIFO_LENGTH * 3]; which is sized for at most BMC150_ACCEL_FIFO_LENGTH (32) samples. The frame count is read from the FIFO_STATUS register and only masked to its 7 valid bits: count = val & 0x7F; so it can be 0..127. The only other limit applied to it is the optional caller-supplied sample budget: if (samples && count > samples) count = samples; which does not constrain count on the flush-all path (samples == 0), and leaves it well above 32 whenever samples is larger. count samples are then transferred into buffer[]: bmc150_accel_fifo_transfer(data, (u8 *)buffer, count); bmc150_accel_fifo_transfer() reads count * 6 bytes through regmap, so a malfunctioning, malicious or counterfeit accelerometer (or an attacker tampering with the I2C/SPI bus) that reports up to 127 frames writes up to 762 bytes into the 192-byte buffer: a stack out-of-bounds write of up to 570 bytes that clobbers the stack canary, saved registers and the return address. Clamp count to BMC150_ACCEL_FIFO_LENGTH, the number of samples buffer[] is sized for, before the transfer, mirroring the watermark clamp already done in bmc150_accel_set_watermark(). A well-formed flush reports at most BMC150_ACCEL_FIFO_LENGTH frames, so legitimate devices are unaffected.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products