A denial-of-service vulnerability could allow an authenticated attacker to modify the parameters of the product and cause the device to enter an indefinite restart loop, requiring a manual restart to resolve.
Search vulnerabilities
Gargoyle 2023.1 through 2026.1.1 Plus Interpreter Infinite Loop via ReadString()
Gargoyle 2023.1 through 2026.1.1 contains an infinite loop vulnerability in the bundled Plus interpreter's ReadString() function in terps/plus/loaddatabase.c that fails to handle end of file. Attackers can supply an empty, truncated, or crafted .plus game file that hangs Gargoyle at full CPU until the user kills it.
sched/rt,dl: Skip migrate-disabled tasks when picking a push candidate
In the Linux kernel, the following vulnerability has been resolved: sched/rt,dl: Skip migrate-disabled tasks when picking a push candidate A migrate_disable()'d RT task cannot be moved to another CPU, but the scheduler still keeps such a task on that CPU's pushable list (rq->rt.pushable_tasks) and still marks the runqueue RT-overloaded (rq->rt.overloaded = 1). So the RT balancer keeps treating this CPU as having a task to move away, and keeps trying to move the task, but the push can never succeed. When the head is pinned, push_rt_task() does not give up either. It falls back to pushing rq->curr instead, using the per-CPU stopper, as added by commit a7c81556ec4d ("sched: Fix migrate_disable() vs rt/dl balancing"). The CPU spends tens of milliseconds in this retry loop. The core is isolated for real-time work, but during the loop nearly half of its time is consumed by pushes that cannot succeed. An ftrace capture of the affected CPU, with sched_switch enabled and commit 94894c9c477e ("sched/rt: Skip currently executing CPU in rto_next_cpu()") applied, shows where the CPU time went. Two SCHED_FIFO tasks at equal priority shared the CPU, taskA migrate_disable()'d and queued, taskB as rq->curr. In one 89 ms window, taskB got only 52 ms of CPU. The other 37 ms went to the stopper thread. The scheduler kept trying to push taskA, the pinned head of the pushable list, fell back to pushing taskB instead, and woke the stopper 5204 times. Every one of those pushes failed and no task was moved. taskA stayed runnable and queued the whole time, and never ran. Pushing taskB fails on a re-check. find_lock_lowest_rq() drops the rq lock to take the target rq lock, then checks again with "task != pick_next_pushable_task(rq)". The task being pushed is taskB, but the pick returns taskA, the head of the pushable list. taskB is rq->curr, and set_next_task_rt() removes the running task from that list, so taskB can never be the head. The check expects a candidate taken from the pushable list, but the fallback pushes rq->curr, which is never on that list. So the check fails every time. .--> push-IPI arrives | | | v | pushable head = taskA -> pinned, cannot be pushed | | | v | so push taskB instead -> wake migration/N, a stop-class | | thread, so it preempts taskB | v | re-check compares taskB against the pushable head, | which is still taskA -> give up | | | v | nothing moved, taskA still queued, rq still overloaded | | '----------' repeats every ~17 us, 5204 times, for 89 ms The loop cannot stop itself. Every round leaves the runqueue exactly as it was, so the next push-IPI does the same thing. In the capture it ended only when taskB went to sleep on its own. taskA was then picked locally and left the pushable list. CPU time per task in the window, from sched_switch: taskB 51.95 ms real work migration/N 37.18 ms nothing moved taskA 0.00 ms queued the whole time, never picked idle 0.01 ms Counts over the same window: 7667 push-IPIs handled on this CPU 17481 pick_next_pushable_task() returned taskA, still pinned 5204 find_lock_lowest_rq() gave up on the re-check 1 push that actually completed 0 migrations of taskA The CPU times and the window length come from the standard sched_switch tracepoint. The counts needed tracepoints added inside the RT balancer for this investigation. The self-IPI path is closed by the rto_next_cpu() fix above, and that part works. But the runqueue is still marked overloaded, because the pinned task is still advertised as pushable. Other CPUs now send the push-IPIs during their own RT balancing, and the same loop runs again. Closing the self-IPI path did not stop a pinn ---truncated---
BACnet Stack: Denial of Service (Infinite Loop) in handler_read_property_multiple via malformed RPM requests
BACnet Stack is a BACnet open source protocol stack C library for embedded systems. Prior to versions 1.4.5, 1.5.1, and 1.6.0, a Denial of Service (DoS) vulnerability exists in the BACnet stack's ReadPropertyMultiple (RPM) handler. When processing a malformed RPM request packet that lacks the expected closing tags, the function handler_read_property_multiple enters an infinite loop. This issue has been patched in versions 1.4.5, 1.5.1, and 1.6.0.
NFSD: Fix infinite loop in layout state revocation
In the Linux kernel, the following vulnerability has been resolved: NFSD: Fix infinite loop in layout state revocation find_one_sb_stid() skips stids whose sc_status is non-zero, but the SC_TYPE_LAYOUT case in nfsd4_revoke_states() never sets sc_status before calling nfsd4_close_layout(). The retry loop therefore finds the same layout stid on every iteration, hanging the revoker indefinitely.
tty: serial: samsung: Remove redundant port lock acquisition in rx helpers
In the Linux kernel, the following vulnerability has been resolved: tty: serial: samsung: Remove redundant port lock acquisition in rx helpers Sashiko identified a deadlock when the console flow is engaged [1]. When console flow control is enabled (UPF_CONS_FLOW), s3c24xx_serial_stop_tx() calls s3c24xx_serial_rx_enable() and s3c24xx_serial_start_tx() calls s3c24xx_serial_rx_disable(). The serial core framework invokes the .stop_tx() and .start_tx() callbacks with the port->lock spinlock already held. Furthermore, all internal driver paths that invoke stop_tx (such as the DMA TX completion handler s3c24xx_serial_tx_dma_complete() or the PIO TX IRQ handler s3c24xx_serial_tx_irq()) also acquire port->lock prior to calling it. (Note that s3c24xx_serial_start_tx() is only invoked by the serial core). However, s3c24xx_serial_rx_enable() and s3c24xx_serial_rx_disable() unconditionally attempt to acquire port->lock again using uart_port_lock_irqsave(). Since spinlocks are not recursive, this causes a deadlock on the same CPU when console flow control is engaged. Remove the redundant lock acquisition from both rx helper functions.
bridge: cfm: reject invalid CCM interval at configuration time
In the Linux kernel, the following vulnerability has been resolved: bridge: cfm: reject invalid CCM interval at configuration time ccm_tx_work_expired() re-arms itself via queue_delayed_work() using the configured exp_interval converted by interval_to_us(). When exp_interval is BR_CFM_CCM_INTERVAL_NONE or out of range, interval_to_us() returns 0, causing the worker to fire immediately in a tight loop that allocates skbs until OOM. Fix this by validating exp_interval at configuration time: - Constrain IFLA_BRIDGE_CFM_CC_CONFIG_EXP_INTERVAL to the valid range [BR_CFM_CCM_INTERVAL_3_3_MS, BR_CFM_CCM_INTERVAL_10_MIN] in the netlink policy so userspace cannot set an invalid value. - Reject starting CCM TX in br_cfm_cc_ccm_tx() when exp_interval has not yet been configured (defaults to 0 from kzalloc).
A device certificate whose CA isn't registered can keep a TLS handshake running forever
Loop with Unreachable Exit Condition ('Infinite Loop') vulnerability in device certificate verification in nerves-hub nerves_hub_web allows an unauthenticated remote attacker to cause a denial of service via a TLS client certificate whose CA is not registered. When a client certificate chains to a root in the device endpoint's trust store but no CA in the chain is registered in NervesHub, NervesHub.SSL.decide/2 refuses it with the reason :unknown_ca. Erlang/OTP ssl reads that reason as a missing trust anchor, looks for an alternative root, finds the same root and validates again without end. The handshake process queries the database on each pass and keeps running after the client disconnects, until the node restarts. The device endpoint trusts the public roots from CAStore unless DEVICE_SSL_CACERTFILE is set, so a client certificate from a public CA whose chain allows client authentication is sufficient. A chain that ends at a root outside the trust store is refused once. This issue affects nerves_hub: from 1.0.0 before 2.5.4.
Bluetooth BR/EDR SDP server blocks the Bluetooth workqueue indefinitely when the SDP buffer pool is empty
The Bluetooth Classic SDP server in subsys/bluetooth/host/classic/sdp.c allocated every response PDU through bt_sdp_create_pdu(), which expands to bt_l2cap_create_pdu() and therefore uses a K_FOREVER timeout. The allocation is made from sdp_pool, a fixed pool holding only CONFIG_BT_MAX_CONN buffers (one in the default configuration) that is shared with the SDP client role. When the pool is empty the call blocks without a bound. The allocation is reached from bt_sdp_recv() on the Bluetooth host's RX context: the bt_workq "BT RX WQ" workqueue in the default configuration since v3.1.0, and the dedicated "BT RX" thread before that. This context processes all normal-priority HCI events and all received ACL data. The SDP L2CAP server is registered on PSM 0x0001 with no security requirement (BT_SECURITY_L0), so an unpaired, unauthenticated BR/EDR peer within radio range of a connectable device can drive it. Every malformed or unrecognised SDP PDU reaches send_err_rsp(), and the sdp_svc_search_req(), sdp_svc_att_req() and sdp_svc_search_att_req() handlers allocate as well, so a short burst of pipelined requests drains the pool and parks the RX context in the blocking allocation. A pool buffer is released only once its response has been sent, and a peer that withholds baseband acknowledgements keeps the controller's buffers for the link full, so the response is never sent. While the RX context is blocked, the entire Bluetooth host, for all connections and both LE and BR/EDR, stops processing normal-priority HCI events and received data. In most affected releases the stall is permanent. Queued PDUs are freed only by connection or channel teardown, which waits for the normal-priority Disconnection Complete handler, and that handler runs on the blocked RX context, so the host does not recover without a reset. In v3.7.0 through v4.1.x the TX processor discards the queued response once the link supervision timeout drops the connection, so each stall ends at that timeout, but the peer can reconnect and repeat it for as long as it stays in range. The impact is limited to availability; no memory corruption or information disclosure is involved. The fix adds sdp_svc_create_pdu() using K_NO_WAIT, pre-allocates the response buffer once in bt_sdp_recv(), stashes the request in sdp->recv_pending when no buffer is available, and retries it from a work handler once a buffer is freed by the pool destroy callback.
Bluetooth Classic SDP client can deadlock the Bluetooth workqueue on buffer allocation
The Bluetooth Classic SDP client built its outgoing request PDUs with bt_sdp_create_pdu(), which allocates from the sdp_pool net-buf pool with a K_FOREVER timeout and no failure handling, in sdp_client_ss_search(), sdp_client_sa_search() and sdp_client_ssa_search() in subsys/bluetooth/host/classic/sdp.c. All of these run on the Bluetooth workqueue bt_workq (via sdp_client_work_handler(), the L2CAP sdp_client_connected() callback, or the continuation-state follow-up from a received response), which is the same single thread that dispatches incoming HCI ACL and event traffic, drives L2CAP, and performs connection and channel teardown. sdp_pool holds only CONFIG_BT_MAX_CONN buffers (one by default) and is shared with the SDP server role. An unauthenticated peer within BR/EDR range can drive both halves of the trigger. The SDP L2CAP server is registered at BT_SECURITY_L0, so any inbound SDP request makes the device allocate the pool's buffer for a response, which is held until the controller has transmitted it. The same peer can then cause a client request to be issued while the pool is empty: in-tree profiles start SDP discovery from inbound connection callbacks (for example hfp_hf_accept() calls bt_sdp_discover() through hfp_hf_create(), and hfp_ag.c mirrors this), and a peer acting as an SDP server can force repeated client requests by answering with partial responses carrying continuation state. With the pool empty, the allocation blocks uninterruptibly and freezes the entire Bluetooth host. The stall becomes permanent when the release of the outstanding buffer itself depends on the blocked workqueue: if the link carrying the queued PDU is dropped or stalls, hci_disconn_complete() and the L2CAP channel cleanup that purges the channel TX queue are themselves bt_workq work items, so the buffer is never returned. The result is an unrecoverable denial of service of all Bluetooth functionality until reboot; there is no memory-safety, confidentiality or integrity impact. The fix allocates client PDUs with K_NO_WAIT via a new sdp_client_create_pdu(), propagates -ENOBUFS, parks the session on a new SDP_CLIENT_FLAG_WAIT_FOR_TX_BUF flag, and adds an sdp_pool destructor that re-submits the SDP client worker when a buffer becomes available. Note that the SDP server role still allocated from the same pool with K_FOREVER at this commit; that path was addressed separately.
Apache DataSketches Java: Uncontrolled resource consumption when deserializing crafted sketch images
Uncontrolled Resource Consumption vulnerability in the sketch deserialization of Apache DataSketches Java. Several deserializers trusted sizes and counts declared in the serialized input. A small crafted input could make an application allocate an excessive amount of memory, leading to an OutOfMemoryError. A crafted string passed to FrequentLongsSketch.getInstance(String) could also make deserialization, or a later update, loop indefinitely. Only applications that deserialize sketches from untrusted sources are affected. This issue affects Apache DataSketches Java: through 9.0.0. Users are recommended to upgrade to version 9.1.0, which fixes the issue.
Bluetooth Classic AVRCP browsing channel can deadlock the Bluetooth receive thread, hanging the host
The AVRCP browsing channel's L2CAP receive-buffer callback, browsing_avrcp_l2cap_alloc_buf() in subsys/bluetooth/host/classic/avrcp.c, allocated from the shared avctp_browsing_rx_pool with K_FOREVER. L2CAP invokes that callback from the Bluetooth RX work queue thread (bt_workq, "BT RX WQ"), both for the head buffer of a new SDU and — through l2cap_br_alloc_frag() and net_buf_append_bytes() — for every further fragment of a reassembled SDU. That same thread is the only context that ever releases these buffers, after bt_l2cap_br_recv_seg() delivers a completed SDU and calls net_buf_unref(), so a wait taken there can never be satisfied. The pool holds CONFIG_BT_MAX_CONN + 1 buffers of CONFIG_BT_AVRCP_BROWSING_L2CAP_MTU bytes (two buffers of 339 bytes in the default configuration). A connected browsing peer can drain it because bt_l2cap_br_recv_seg() in subsys/bluetooth/host/classic/l2cap_br.c accepts the SDU length declared in an SAR_START segment without bounding it by br_chan->rx.mtu: a peer that announces a large SDU and then streams continuation segments forces one pool buffer per segment-worth of data. Once the pool is empty the next allocation blocks forever inside the callback. Triggering the flaw requires a build with CONFIG_BT_CLASSIC and the experimental CONFIG_BT_AVRCP_BROWSING option, an application that registers AVRCP callbacks, and a BR/EDR peer that has established the AVRCP control channel and then the browsing channel, which requires an encrypted (paired) link. No malformed packet is needed — a few hundred bytes of ordinary segmented L2CAP traffic suffice. The consequence is a permanent hang of the whole Bluetooth host, not just of AVRCP: the blocked thread drains bt_dev.rx_queue for all HCI ACL data and low-priority events and also runs the host's internal work items, so all connections stop being serviced and the state is unrecoverable without a reboot. There is no memory-corruption or information-disclosure component. The fix allocates with K_NO_WAIT, so an empty pool now yields a local-busy indication or a channel disconnect that the application can recover from.
Integer overflow vulnerability in QTextCodec fromUnicode() and toUnicode() impacts Qt
An integer overflow vulnerability in the Qt QTextCodec fromUnicode() and toUnicode() functionality of the Qt 5 Core Compatibility APIs module (Qt 6) and the Qt Core module (Qt 5). Only builds where Qt is compiled with ICU support are affected.
Infinite Loop in CMS_encrypt() With an EC Group Order of 1
Issue summary: Encrypting a CMS message to an EC certificate whose group order is 1 may cause CMS_encrypt() or CMS_encrypt_ex() to loop indefinitely. Impact summary: An attacker able to supply the recipient certificate to an application performing CMS encryption can cause that application to loop indefinitely, consuming CPU and resulting in Denial of Service. CWE: CWE-835: Loop with Unreachable Exit Condition ('Infinite Loop') Description: CMS_encrypt() and CMS_encrypt_ex() encrypt a message to one or more recipient certificates and, for an EC recipient, generate an ephemeral key in the recipient's group. If the certificate declares a group order of 1, random scalar generation can only produce zero. The key generation routine then retries without limit while waiting for a nonzero private scalar, so the call never returns. The OpenSSL TLS and QUIC implementations do not use this path. An application is exposed only if it calls CMS_encrypt() or CMS_encrypt_ex() with a recipient certificate whose EC parameters are attacker-controlled. Certificates with normal EC group orders do not trigger the loop. OpenSSL 4.0 and later reject unknown explicit EC groups in default builds. These versions are affected only when configured with the enable-ec_explicit_curves option. The result is a hang that consumes a CPU core until the process is interrupted, a Denial of Service. The severity is Low because the attacker must supply the recipient certificate and the application must choose to encrypt to it; ordinary CMS encryption to trusted recipients is unaffected. The fix makes EC key generation fail when the group has no valid nonzero private scalar, instead of retrying indefinitely. FIPS impact: no The FIPS modules in 4.1, 4.0, 3.5 and 3.0 are not affected. The FIPS provider does not support arbitrary explicit EC domain parameters, so an order-1 group is rejected during key import before the vulnerable key generation path is reached.
Infinite Loop in Intel TDX Migration Trust Domain Causes Denial of Service
Loop with unreachable exit condition ('infinite loop') in the MigTD's GetQuote for the Intel(R) TDX Migration Trust Domain (MigTD) within Ring 0: Hypervisor may allow a denial of service. System software adversary with an unauthenticated user combined with a low complexity attack may enable denial of service. This result may potentially occur via local access when attack requirements are not present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (none), integrity (none) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts.
Dbus: infinite cpu-spin loop in libdbus socket transport when epipe is received during write operations
A flaw was found in dbus. A local attacker can exploit this vulnerability by connecting to an affected service, requesting a response, and stopping socket reads while keeping the connection open. Because the socket transport handles broken pipe write errors as retryable, the application enters a continuous retry loop. This can lead to excessive CPU consumption, resulting in a denial of service (DoS) for the target process.
BLE Advertising Payload Infinite Loop Causes CPU Exhaustion
In Eclipse Kura versions 3.1.0 to 5.6.2, the iBeacon and Eddystone advertisement decoders wrongly parse the AD-structure length field of an over-the-air BLE advertising payload. Any unauthenticated attacker within BLE radio range can broadcast a two-byte advertising payload that drives the Kura beacon-scanner thread into a tight infinite loop, pinning a CPU core and permanently halting beacon ingestion until the gateway is restarted. To trigger the attack, the iBeacon/Eddystone scanner component should be installed and active. By default the components are not installed or enabled.
Apache TomEE: Authentication with the stored password digest in Tomcat user identity store
The Jakarta Security identity store backed by the Tomcat user database compares the supplied password with the stored value as plain text and ignores the configured credential handler. When digested passwords are stored, an attacker who obtained a stored digest, for example from a leaked users file or backup, can authenticate with the digest instead of the password. Users are recommended to upgrade to version 10.3.0 or 11.0.0-M2, which fix the issue.
netfilter: nft_fwd_netdev: use recursion counter in neigh egress path
In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_fwd_netdev: use recursion counter in neigh egress path nft_fwd_neigh can be used in egress chains (NF_NETDEV_EGRESS). When the forwarding rule targets the same device or two devices forward to each other, neigh_xmit() triggers dev_queue_xmit() which re-enters nf_hook_egress(), causing infinite recursion and stack overflow. Move the nf_get_nf_dup_skb_recursion() accessor and NF_RECURSION_LIMIT to the shared header nf_dup_netdev.h as a static inline, so that nft_fwd_netdev can use the recursion counter directly without exported function call overhead. Guard neigh_xmit() with the same recursion limit already used in nf_do_netdev_egress(). [ Updated to cache the nf_get_nf_dup_skb_recursion pointer. --pablo ]
Inclusion of Web Functionality from an Untrusted Source on B. Braun SpaceCom, Battery Pack SP with Wi-Fi
An inclusion of web functionality from an untrusted source could allow remote code execution on SpaceCom